Investigating the Impact of Declination Angle on the Side Milling Process of Additively Manufactured Ti6Al4V Using a 3D Milling Finite Element Model †
Abstract
:1. Introduction
2. Material and Method
3. Simulation Results and Discussion
Impact of Varied Declination Angle θ on Milling Force
4. Conclusions
Author Contributions
Funding
Institutional Review Board Statement
Informed Consent Statement
Data Availability Statement
Acknowledgments
Conflicts of Interest
References
- Turner, B.N.; Gold, S.A. A review of melt extrusion additive manufacturing processes: II. Materials, dimensional accuracy, and surface roughness. Rapid Prototyp. J. 2015, 21, 250–261. [Google Scholar] [CrossRef]
- El-Hofy, H. Advanced Machining Processes; The McGraw Hill Companies: New York, NY, USA, 2005. [Google Scholar]
- Wu, H.B.; Zhang, S.J. 3D FEM simulation of milling process for titanium alloy Ti6Al4V. Int. J. Adv. Manuf. Technol. 2014, 71, 1319–1326. [Google Scholar] [CrossRef]
- Rahman, M.; Heikkala, J.; Lappalainen, K. Modeling, measurement and error compensation of multi-axis machine tools. Part I: Theory. Int. J. Mach. Tools Manuf. 2000, 40, 1535–1546. [Google Scholar] [CrossRef]
- Prabha, K.A.; Prasad, B.S. Machining of steam turbine blade on 5-axis CNC machine. Mater. Today Proc. 2019, 18, 3001–3007. [Google Scholar] [CrossRef]
- Ren, Z.; Zhang, X.; Wang, Y.; Li, Z.; Liu, Z. Finite element analysis of the milling of Ti6Al4V titanium alloy laser additive manufacturing parts. Appl. Sci. 2021, 11, 4813. [Google Scholar] [CrossRef]
- Zhu, X.; Shi, J.; Liu, Y. Effect of Declination Angle on the Side Milling Process of Ti6Al4V by a New Three-Dimensional Milling Finite Element Model. J. Mater. Eng. Perform. 2023, 32, 10702–10711. [Google Scholar] [CrossRef]
- Hu, W.; Guan, J.; Li, B.; Cao, Y.; Yang, J. Influence of tool assembly error on machined surface in peripheral milling process. Procedia CIRP 2015, 27, 137–142. [Google Scholar] [CrossRef]
A (MPa) | B (MPa) | m | n | Ttransition | Tmelt |
---|---|---|---|---|---|
1000 | 780 | 1.1 | 0.47 | 20 | 1851 |
d1 | d2 | d3 | d4 | d5 |
---|---|---|---|---|
−0.09 | 0.25 | −0.5 | 0.015 | 3.8 |
Disclaimer/Publisher’s Note: The statements, opinions and data contained in all publications are solely those of the individual author(s) and contributor(s) and not of MDPI and/or the editor(s). MDPI and/or the editor(s) disclaim responsibility for any injury to people or property resulting from any ideas, methods, instructions or products referred to in the content. |
© 2024 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (https://creativecommons.org/licenses/by/4.0/).
Share and Cite
Pal, S.; Velay, X.; Saleem, W. Investigating the Impact of Declination Angle on the Side Milling Process of Additively Manufactured Ti6Al4V Using a 3D Milling Finite Element Model. Eng. Proc. 2024, 65, 1. https://doi.org/10.3390/engproc2024065001
Pal S, Velay X, Saleem W. Investigating the Impact of Declination Angle on the Side Milling Process of Additively Manufactured Ti6Al4V Using a 3D Milling Finite Element Model. Engineering Proceedings. 2024; 65(1):1. https://doi.org/10.3390/engproc2024065001
Chicago/Turabian StylePal, Surinder, Xavier Velay, and Waqas Saleem. 2024. "Investigating the Impact of Declination Angle on the Side Milling Process of Additively Manufactured Ti6Al4V Using a 3D Milling Finite Element Model" Engineering Proceedings 65, no. 1: 1. https://doi.org/10.3390/engproc2024065001