Next Article in Journal
Towards Just Energy Transition: Renewable Energy Transition Dynamics and Sectorial Employment in Ghana
Previous Article in Journal
Consumer Behaviour Regarding Certified Food
 
 
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Correction

Correction: Abed, M.; Mehryaar, E. A Machine Learning Approach to Predict Relative Residual Strengths of Recycled Aggregate Concrete after Exposure to High Temperatures. Sustainability 2024, 16, 1891

Newark College of Engineering, New Jersey Institute of Technology, Newark, NJ 01102, USA
*
Author to whom correspondence should be addressed.
These authors contributed equally to this work.
Sustainability 2024, 16(9), 3760; https://doi.org/10.3390/su16093760
Submission received: 15 April 2024 / Accepted: 22 April 2024 / Published: 30 April 2024
The authors would like to make the following corrections regarding the published paper [1]. The changes are as follows:
The authors would like to change Figure 16 and Figure 17, because Figure 11 is the same as Figure 16, and Figure 12 is the same as Figure 17 in the published version. This correction was approved by the Academic Editor. Below are the updated Figure 16 and Figure 17:
The authors apologize for any inconvenience caused and state that the scientific conclusions are unaffected. This correction was approved by the Academic Editor. The original publication has also been updated.

Reference

  1. Abed, M.; Mehryaar, E. A Machine Learning Approach to Predict Relative Residual Strengths of Recycled Aggregate Concrete after Exposure to High Temperatures. Sustainability 2024, 16, 1891. [Google Scholar] [CrossRef]
Figure 16. Predicted relative residual splitting tensile strength vs. observed relative residual splitting tensile strength for training split of developed models.
Figure 16. Predicted relative residual splitting tensile strength vs. observed relative residual splitting tensile strength for training split of developed models.
Sustainability 16 03760 g016
Figure 17. Predicted relative residual splitting tensile strength versus observed relative residual splitting tensile strength for testing split of developed models.
Figure 17. Predicted relative residual splitting tensile strength versus observed relative residual splitting tensile strength for testing split of developed models.
Sustainability 16 03760 g017
Disclaimer/Publisher’s Note: The statements, opinions and data contained in all publications are solely those of the individual author(s) and contributor(s) and not of MDPI and/or the editor(s). MDPI and/or the editor(s) disclaim responsibility for any injury to people or property resulting from any ideas, methods, instructions or products referred to in the content.

Share and Cite

MDPI and ACS Style

Abed, M.; Mehryaar, E. Correction: Abed, M.; Mehryaar, E. A Machine Learning Approach to Predict Relative Residual Strengths of Recycled Aggregate Concrete after Exposure to High Temperatures. Sustainability 2024, 16, 1891. Sustainability 2024, 16, 3760. https://doi.org/10.3390/su16093760

AMA Style

Abed M, Mehryaar E. Correction: Abed, M.; Mehryaar, E. A Machine Learning Approach to Predict Relative Residual Strengths of Recycled Aggregate Concrete after Exposure to High Temperatures. Sustainability 2024, 16, 1891. Sustainability. 2024; 16(9):3760. https://doi.org/10.3390/su16093760

Chicago/Turabian Style

Abed, Mohammed, and Ehsan Mehryaar. 2024. "Correction: Abed, M.; Mehryaar, E. A Machine Learning Approach to Predict Relative Residual Strengths of Recycled Aggregate Concrete after Exposure to High Temperatures. Sustainability 2024, 16, 1891" Sustainability 16, no. 9: 3760. https://doi.org/10.3390/su16093760

Note that from the first issue of 2016, this journal uses article numbers instead of page numbers. See further details here.

Article Metrics

Back to TopTop