Journal Description
Minerals
Minerals
is an international, peer-reviewed, open access journal of natural mineral systems, mineral resources, mining, and mineral processing. Minerals is published monthly online by MDPI.
- Open Access— free for readers, with article processing charges (APC) paid by authors or their institutions.
- High Visibility: indexed within Scopus, SCIE (Web of Science), GeoRef, CaPlus / SciFinder, Inspec, Astrophysics Data System, AGRIS, and other databases.
- Journal Rank: JCR - Q2 (Mining & Mineral Processing) / CiteScore - Q2 (Geology)
- Rapid Publication: manuscripts are peer-reviewed and a first decision is provided to authors approximately 18.7 days after submission; acceptance to publication is undertaken in 2.6 days (median values for papers published in this journal in the second half of 2023).
- Recognition of Reviewers: reviewers who provide timely, thorough peer-review reports receive vouchers entitling them to a discount on the APC of their next publication in any MDPI journal, in appreciation of the work done.
- Companion journal: Mining
Impact Factor:
2.5 (2022);
5-Year Impact Factor:
2.7 (2022)
Latest Articles
Phase Transformation of Arsenic, Antimony and Lead in High-Grade Copper Matte Converting
Minerals 2024, 14(5), 499; https://doi.org/10.3390/min14050499 - 9 May 2024
Abstract
The duration of the high-grade matte converting process is short, the amount of slag is small, and it is difficult for the original impurity removal operation in the low-grade matte converting process to meet the current production demand. Because the removal method for
[...] Read more.
The duration of the high-grade matte converting process is short, the amount of slag is small, and it is difficult for the original impurity removal operation in the low-grade matte converting process to meet the current production demand. Because the removal method for impurity elements during high-grade matte converting is unclear, the phase transformation of impurity elements during this process is investigated in this study. The results show that arsenic exists mainly in the form of FeAsO4 and As2O5, antimony in the form of Sb and Sb2O5, and lead in the form of PbS and PbO in high-grade matte. During the converting process, arsenic and antimony mainly exist in the melt in the form of oxides and gradually aggregate into large particles with increasing copper content in the melt. Lead exists in matte in the form of PbS until the end of the converting process, and PbS is not completely oxidized until the matte converted to blister copper phase. The phase transformation characteristics of copper, iron, sulfur and impurity elements in the process of high-grade matte converting were revealed. This study provides a theoretical reference for the formulation of an efficient impurity removal scheme for the converting process.
Full article
(This article belongs to the Special Issue Advances in Pyrometallurgy of Minerals and Ores)
►
Show Figures
Open AccessArticle
The Ballynoe Stratiform Barite Deposit, Silvermines, County Tipperary, Ireland
by
Colin J. Andrew
Minerals 2024, 14(5), 498; https://doi.org/10.3390/min14050498 - 9 May 2024
Abstract
The Ballynoe barite deposit is a conformable, mineralised horizon of Lower Carboniferous age overlying a diastem and mass faunal extinction demarking the transition from a quiet water environment to one of dynamic sedimentation. The geometry of the barite orebody correlates with the palaeotopography
[...] Read more.
The Ballynoe barite deposit is a conformable, mineralised horizon of Lower Carboniferous age overlying a diastem and mass faunal extinction demarking the transition from a quiet water environment to one of dynamic sedimentation. The geometry of the barite orebody correlates with the palaeotopography of the footwall, which acted as an important control over the lateral extent, thickness, and nature of the mineralisation. Sedimentary features within the barite horizon suggest that it was precipitated in the form of a cryptocrystalline mud which underwent major diagenetic modification resulting in extensive stylolitisation, recrystallisation, and remobilisation. There is abundant and compelling geological and isotopic evidence for early local exhalation from the presence of a hydrothermal vent fauna consisting of delicately pyritised worm tubes and haematised filaments of apparent microbial origin. The worm tubes are remarkably similar to examples from modern and ancient volcanic-hosted massive sulphide deposits, and the filamentous microfossils have similarities to modern Fe-oxidising bacteria. Strontium in the barite has an 87Sr/86Sr ratio indistinguishable from seawater between 350 and 344 Ma whilst oxygen isotopes from barite and chert suggest a diagenetic origin in equilibrium with such seawater around 60–70 °C. Fluid inclusion studies have shown that, in general, low temperature inclusions are very saline (20%–25%) whilst at higher homogenisation temperatures they are more dilute (9%–12%).
Full article
(This article belongs to the Special Issue Stratabound Barite Deposits: Mineralogy, Isotope Geochemistry and Geochronology)
►▼
Show Figures
Figure 1
Open AccessArticle
Controls on Soft Tissue and Cellular Preservation in Late Eocene and Oligocene Vertebrate Fossils from the White River and Arikaree Groups of Nebraska, South Dakota, and Wyoming
by
John E. Gallucci, Grace Woolslayer, Kelsey Barker, Brian Kibelstis, Allison R. Tumarkin-Deratzian, Paul V. Ullmann, David E. Grandstaff and Dennis O. Terry, Jr.
Minerals 2024, 14(5), 497; https://doi.org/10.3390/min14050497 - 8 May 2024
Abstract
Previous studies on microtaphonomy have identified multiple types of organic microstructures in fossil vertebrates from a variety of time periods and past environmental settings. This study investigates potential taphonomic, paleoenvironmental, and paleoclimatic controls on soft tissue and cellular preservation in fossil bone. To
[...] Read more.
Previous studies on microtaphonomy have identified multiple types of organic microstructures in fossil vertebrates from a variety of time periods and past environmental settings. This study investigates potential taphonomic, paleoenvironmental, and paleoclimatic controls on soft tissue and cellular preservation in fossil bone. To this end, fifteen vertebrate fossils were studied: eight fossils collected from the Oligocene Sharps Formation of the Arikaree Group in Badlands National Park, South Dakota, and seven fossils from formations in the underlying White River Group, including the Oligocene Brule Formation of Badlands National Park, and the Eocene Chadron Formation of Flagstaff Rim, Wyoming; Toadstool Geologic Park, Nebraska; and Badlands National Park, South Dakota. A portion of each fossil was demineralized to identify any organic microstructures preserved within the fossils. We investigated several factors which may have influenced cellular/soft tissue decay and/or preservation pathways, including taxonomic identity, paleoclimatic conditions, depositional environment, and general diagenetic history (as interpreted through thin section analysis). Soft tissue microstructures were preserved in all fossil samples, and cellular structures morphologically consistent with osteocytes were recovered from 11 of the 15 fossil specimens. Preservation of these microstructures was found to be independent of taxonomy, paleoclimate regime, apatite crystallinity, depositional environment, and general diagenetic history, indicating that biogeochemical reactions operating within microenvironments within skeletal tissues, such as within individual osteocyte lacunae or Haversian canals, may exert stronger controls on soft tissue and biomolecular decay or stabilization than external environmental (or climatic) conditions.
Full article
(This article belongs to the Special Issue Recent Advances in Bone Diagenesis)
►▼
Show Figures
Figure 1
Open AccessArticle
Geology and Geochronology of Magmatic–Hydrothermal Breccia Pipes in the Yixingzhai Gold Deposit: Implications for Ore Genesis and Regional Exploration
by
Li-Zhong Zhang, Wen-Sheng Gao and Xiao-Dong Deng
Minerals 2024, 14(5), 496; https://doi.org/10.3390/min14050496 - 8 May 2024
Abstract
Magmatic–hydrothermal breccia pipes are widespread in numerous major porphyry and epithermal gold deposits globally, representing significant repositories of metal resources and serving as potential indicators for exploration targeting. More than ten breccia pipes occur in the Central Taihangshan District (CTD) of the North
[...] Read more.
Magmatic–hydrothermal breccia pipes are widespread in numerous major porphyry and epithermal gold deposits globally, representing significant repositories of metal resources and serving as potential indicators for exploration targeting. More than ten breccia pipes occur in the Central Taihangshan District (CTD) of the North China Craton. Some of these breccia pipes host gold mineralization and are proposed to be related to the adjacent lode gold mineralization. However, the lack of detailed geological constraints make this hypothesis ambiguous. To address this, the present study conducted comprehensive field observations, drill core logging, an in situ sulfur isotope analysis of pyrite, and the 40Ar/39Ar dating of adularia along a 1400 m section of the Tietangdong breccia pipe at Yixingzhai. Three distinct breccia facies were identified at Tietangdong, exhibiting variable proportions across the entire section, including a massive skarn breccia; polymictic, skarn matrix-supported breccia; and polymictic, intrusive rock cement chaotic breccia. Furthermore, adularia 40Ar/39Ar dating indicates a syn-/post-gold mineralization age of 136 ± 1.5 Ma, coinciding with the age of post-breccia felsite dike. The deepest sampled pyrite displays δ34S values of ~2.7‰, strongly indicating a magmatic–hydrothermal signature. These results, when combined with the geological, geochronological, and isotopic studies on the adjacent lode gold mineralization, further suggest a close genetic relationship between the breccia pipes and the lode Au mineralization, paving the way for their utilization as effective indicators for gold targeting within the CTD.
Full article
(This article belongs to the Special Issue Using Mineral Chemistry to Characterize Ore-Forming Processes)
►▼
Show Figures
Figure 1
Open AccessArticle
Influencing Factors, Risk Assessment, and Source Identification of Heavy Metals in Purple Soil in the Eastern Region of Guang’an City, Sichuan Province, China
by
Yuxiang Shao, Wenbin Chen, Jian Li, Buqing Yan, Haiyun He and Yunshan Zhang
Minerals 2024, 14(5), 495; https://doi.org/10.3390/min14050495 - 7 May 2024
Abstract
Soil heavy metal contamination poses a significant threat to both environmental health and ecological safety. To investigate the influencing factors, ecological hazards, and sources analysis of heavy metals in purple soil, 27 sets of soil samples were collected from varying genetic horizons within
[...] Read more.
Soil heavy metal contamination poses a significant threat to both environmental health and ecological safety. To investigate the influencing factors, ecological hazards, and sources analysis of heavy metals in purple soil, 27 sets of soil samples were collected from varying genetic horizons within Guang’an City, and the contents of As, Cd, Cu, Cr, Hg, Ni, Pb, and Zn were analyzed. The results indicated higher concentrations of heavy metals in soil A horizon, compared to that of C horizon. The relevance analysis indicated that the soil’s heavy metals were strongly correlated with the soil’s physicochemical properties. The enrichment factor, pollution load index, and potential risk index highlighted slightly to severely polluted levels of soil Cd and Hg, which significantly contribute to the ecological hazards posed by soil heavy metals. The potential source of heavy metals analyzed using the APCS-MLR model identified both anthropogenic inputs and natural sources as primary contributors to heavy metal presence in soils. The Cu, Cr, Ni, Pb, and Zn contents in the samples from different genetic horizons were chiefly influenced by natural sources, such as soil matrix erosion and weathering, while the concentrations of Cd and Hg were largely affected by anthropogenic activities, specifically coal combustion and agriculture. Conversely, the As content was found to be influenced by a combination of both factors. Anthropogenic activities greatly impacted soil heavy metals at various depths within the study area, thereby underscoring the importance of monitoring these heavy metals. The findings gained from this research can give a scientific basis for the potential utilization of purple soil.
Full article
(This article belongs to the Special Issue Heavy Metal and Rare Earth Element Pollution in Soil and Water: Sources, Geochemical Behaviors and Ecological Effects)
►▼
Show Figures
Figure 1
Open AccessEditorial
Editorial for Special Issue “Genesis and Evolution of Pb-Zn-Ag Polymetallic Deposits”
by
Yitian Wang and Changqing Zhang
Minerals 2024, 14(5), 494; https://doi.org/10.3390/min14050494 - 7 May 2024
Abstract
Pb-Zn-Ag polymetallic deposits are complex and diverse [...]
Full article
(This article belongs to the Special Issue Genesis and Evolution of Pb-Zn-Ag Polymetallic Deposits)
Open AccessArticle
Evaluation of Ni-Cu Ore from Zapolyarnoe Based on Mineralogical and Physical Properties before and after Comminution
by
Arturo H. Bravo, Holger Lieberwirth and Oleg Popov
Minerals 2024, 14(5), 493; https://doi.org/10.3390/min14050493 - 7 May 2024
Abstract
For the effective comminution and subsequent enrichment of mineral ores, comprehensive knowledge of their mineralogical and physical properties is required. Using an integrated methodology, this study evaluated samples of polymetallic Ni-Cu ore from Zapolyarnoe, Russia. Several analytical techniques were utilised, including optical microscopy,
[...] Read more.
For the effective comminution and subsequent enrichment of mineral ores, comprehensive knowledge of their mineralogical and physical properties is required. Using an integrated methodology, this study evaluated samples of polymetallic Ni-Cu ore from Zapolyarnoe, Russia. Several analytical techniques were utilised, including optical microscopy, microindentation with Vickers geometry, the Point Load Test, and Mineral Liberation Analysis (MLA). The purpose of this study was to determine mineral associations, physical features, and enrichment during jaw crusher comminution. The acquired properties included the Point Load Strength Index, Vickers Hardness Number, and fracture toughness. The MLA method characterised seven fractions in terms of particle size distribution, degree of liberation, association, and modal mineralogy. Magnetite, pyrrhotite, pentlandite, and chalcopyrite were calculated in terms of wt% and their textural features. The enrichment of each ore phase in fractions with particle sizes smaller than 400 µm was determined. The influence of this enrichment was discovered to be correlated with various textural and structural parameters, such as intergrowth, grain size, and crack morphologies after indentations. In addition, the chromium content of magnetite contributed to an increase in the fracture toughness values. Despite the complexities involved, even limited samples of materials provide valuable insights into processing behaviour, emphasising the importance of considering mineralogical parameters in comminution studies.
Full article
(This article belongs to the Special Issue Comminution and Comminution Circuits Optimisation: 3rd Edition)
►▼
Show Figures
Graphical abstract
Open AccessArticle
Exploration Vectors and Indicators Extracted by Factor Analysis and Association Rule Algorithms at the Lintan Carlin-Type Gold Deposit, Youjiang Basin, China
by
Xiaolong Wang, Shengtao Cao, Qinping Tan, Zhuojun Xie, Yong Xia, Lujing Zheng, Jianzhong Liu, Kelin Zhou, Jingdan Xiao and Tingxian Ren
Minerals 2024, 14(5), 492; https://doi.org/10.3390/min14050492 - 7 May 2024
Abstract
The Youjiang Basin in China is the world’s second-largest concentrated area of Carlin-type Au deposits after Nevada, USA, boasting cumulative Au reserves nearing 1000 t. This study examined the recently unearthed Lintan Carlin-type Au deposit within the Youjiang Basin. Factor analysis and association
[...] Read more.
The Youjiang Basin in China is the world’s second-largest concentrated area of Carlin-type Au deposits after Nevada, USA, boasting cumulative Au reserves nearing 1000 t. This study examined the recently unearthed Lintan Carlin-type Au deposit within the Youjiang Basin. Factor analysis and association rule algorithms were used to identify exploration vectors and indicators essential for navigating this promising geological territory. In the Lintan mining area, the geological strata encompass the Triassic Bianyang, Niluo, and Xuman formations comprised clastic rocks, followed by the deeper Permian Wujiaping Formation with massive carbonate rocks. The orebodies are restricted to the F14 inverse fault, cutting through the Xuman Formation, with an additional F7 fault between the Wujiaping and Xuman formations. A total of 125 rock samples from the F14 fault and a representative cross-section were analyzed for 15 elements (Au, Ag, As, Bi, Cd, Co, Cu, Hg, Mo, Ni, Pb, Sb, Tl, W, and Zn). The elements were divided into four groups based on cluster and factor analysis. Group 1 (Co, Cu, Zn, Ni, Tl, W, and Bi) was mainly enriched in the Xuman, Niluo, and Bianyang formations controlled by sedimentary diagenesis. Group 2 (Au, As, Hg, and Sb) was concentrated in the F14 and F7 faults, representing Au mineralization. Group 3 (Pb, Ag, and Mo) was mostly enriched near the F14 and F7 faults, displaying a peripheral halo of Au mineralization, and was probability controlled by ore-forming hydrothermal activities. Group 4 (Cd and Mo) exhibited extreme enrichment along the periphery of the F7 fault. This pattern indicates the presence of a substantial hydrothermal alteration zone surrounding the fault, likely influenced by ore-forming hydrothermal processes. Additionally, Pb, Ag, Cd, Mo, and W are considered essential indicators for ore formation besides Au, As, Sb, Hg, and Tl. Twelve effective association rules were derived using the association rule algorithm, which can aid in discriminating Au mineralization. The spatial distributions of the 15 elements indicated that the F14 fault is the main ore-bearing fracture zone, while the F7 fault serves as the ore-conducting structure, channeling ore-forming fluids into the F14 fault. Faults between the Wujiaping and Xuman formations, along with their associated reverse faults, present potential prospecting targets both within and outside the Lintan Au deposit in the Youjiang Basin. Exploration geochemical data can be fully utilized by combining factor analysis and association rule algorithms, offering key guidance for prospecting Carlin-type gold and similar deposits.
Full article
(This article belongs to the Special Issue Geochemical Exploration for Critical Mineral Resources)
►▼
Show Figures
Figure 1
Open AccessArticle
Recovery of Rare Earth Elements from Ion-Adsorption Deposits Using Electrokinetic Technology: The Soil Conductivity Mechanism Study
by
Shichang Kang, Bowen Ling, Xiaoliang Liang, Gaofeng Wang, Jie Xu, Yongjin Xu, Runliang Zhu, Jingming Wei, Jianxi Zhu and Hongping He
Minerals 2024, 14(5), 491; https://doi.org/10.3390/min14050491 - 7 May 2024
Abstract
Rare earth elements (REEs) are essential raw materials for modern industries but mining them has caused severe environmental issues, particularly the recovery of heavy REEs (HREEs) from ion-adsorption deposits (IADs). Very recently, an emerging technology, electrokinetic mining (EKM), has been proposed for the
[...] Read more.
Rare earth elements (REEs) are essential raw materials for modern industries but mining them has caused severe environmental issues, particularly the recovery of heavy REEs (HREEs) from ion-adsorption deposits (IADs). Very recently, an emerging technology, electrokinetic mining (EKM), has been proposed for the green and efficient recovery of REEs from IADs. However, the conduction mechanism of the weathering crust soil, which is also a prerequisite for EKM, remains unclear, making the EKM process unpredictable. Here, we systematically investigated the conductivity of weathering crust soil in the presence of light REEs (LREEs, i.e., La3+ and Sm3+) and HREEs (Er3+ and Y3+), respectively. Results suggested that the voltage was dynamically and spatially redistributed by the movement of REEs and water during EKM, and the conventional assumption of the linear distribution of voltage leads to an inaccurate description of soil voltage. We proposed an improved Archie’s equation by coupling the mechanisms of liquid phase and solid-liquid interface conduction, which can predict soil conductivity more precisely. Moreover, the extended Archie’s equation is able to recalculate the voltage distribution at distinct times and spaces well during EKM. More importantly, the water content in field-scale weathered-crust soils can be retrieved by the newly proposed Archie’s equation, which helps optimize the leaching wells and improve the recovery rate of REE. This study focuses on the conduction mechanism of weathering crust soil, which provides a theoretical basis for better use of the EKM technology and promotes mining efficiency fundamentally.
Full article
(This article belongs to the Section Mineral Processing and Extractive Metallurgy)
►▼
Show Figures
Graphical abstract
Open AccessArticle
Potential Utilization of Loess in Grouting Materials: Effects of Grinding Time and Calcination Temperature
by
Hao Bai, Kai Wang, Xiaoqiang Zhang, Yulong Jiang and Shiyu Zhang
Minerals 2024, 14(5), 490; https://doi.org/10.3390/min14050490 - 6 May 2024
Abstract
There is a huge reservation of loess in the Shanxi mining area in China, which has great potential for preparing supplementary cementitious materials. Loess was modified via mechanical and thermal activation, and the pozzolanic activity was evaluated using an Inductively Coupled Plasma Optical
[...] Read more.
There is a huge reservation of loess in the Shanxi mining area in China, which has great potential for preparing supplementary cementitious materials. Loess was modified via mechanical and thermal activation, and the pozzolanic activity was evaluated using an Inductively Coupled Plasma Optical Emission Spectrometer (ICP-OES). Moreover, the workability of grouting materials prepared using modified loess was assessed. The experimental results revealed that the number of ultrafine particles gradually increased with the grinding time, enhancing the grouting performance. The coordination number of Al decreased upon the breakage of the Al–O–Si bond post-calcination at 400 °C, 550 °C, 700 °C, and 850 °C. Moreover, the breaking of the Si–O covalent bond produced Si-phases, and the pozzolanic activity of loess increased. Furthermore, the modified loess was hydrated with different cement proportions. With increasing grinding time, the overall setting time increased until the longest time of 14.5 h and the fluidity of the slurry decreased until the lowest fluidity of 9.7 cm. However, the fluidity and setting time decreased with increasing calcination temperature. The lowest values were 12.03 cm and 10.05 h. With the increase in pozzolanic activity, more ettringite was produced via hydration, which enhanced the mechanical properties. The maximum strength of the hydrated loess after grinding for 20 min reached 16.5 MPa. The strength of the hydrated loess calcined at 850 °C reached 21 MPa. These experimental findings provide theoretical support for the practical application of loess in grouting.
Full article
(This article belongs to the Collection Clays and Other Industrial Mineral Materials)
►▼
Show Figures
Figure 1
Open AccessArticle
3D Modelling Approach to Enhance the Characterization of a Bronze Age Nuragic Site
by
Stefano Cara, Paolo Valera and Carlo Matzuzzi
Minerals 2024, 14(5), 489; https://doi.org/10.3390/min14050489 - 6 May 2024
Abstract
Megalithism in Sardinia (Italy) had its highest expression during the Bronze Age with the creation of monumental complexes known as Nuraghes. These unique monuments have recently been the subject of in-depth investigations for their potential to be recognized as World Heritage Sites (by
[...] Read more.
Megalithism in Sardinia (Italy) had its highest expression during the Bronze Age with the creation of monumental complexes known as Nuraghes. These unique monuments have recently been the subject of in-depth investigations for their potential to be recognized as World Heritage Sites (by UNESCO). The main purpose of our research was to make a contribution to obtain a more in-depth characterization of these monuments by testing a 3D model of a complex Nuraghe, integrated with an analysis of the geolithological context. This work first focused on the geological and typological investigation of the materials used in its construction, which was then compared with the geolithological characteristics of the region. A survey of the outcropping remains was carried out by means of Structure-from-Motion Multi-View Stereo (SfM-MVS) photogrammetry with UAV ground and aerial acquisition using APS-C photo sensors, georeferenced with an RTK-GNSS ground survey. The level of accuracy of our digital models shows the potential of the proposed method, giving accurate and geometrically consistent 3D reconstructions in terms of georeferencing error, shape and surface. The survey method allows for the virtualization of the current state of conservation of the Nuraghe, giving a solid basis to set up further (future) archaeological excavations and to contribute to knowledge on the architecture of the structures. This study also provides useful information on the nature and origin of the construction materials and proposes a hypothesis on the original dimensions of the monument, which is often a topic of debate in the world of archaeology.
Full article
(This article belongs to the Special Issue Multidisciplinary Research for the Monitoring and Preventive Conservation of Cultural Heritage)
►▼
Show Figures
Graphical abstract
Open AccessArticle
Mineralogical Constraints on the Pressure–Temperature Evolution of Granulites in the Bunger Hills, East Antarctica
by
Ilnur A. Abdrakhmanov, Yuri L. Gulbin, Sergey G. Skublov and Olga L. Galankina
Minerals 2024, 14(5), 488; https://doi.org/10.3390/min14050488 - 4 May 2024
Abstract
Spinel- and orthopyroxene-bearing metapelitic granulites exposed in the Bunger Hills, East Antarctica, have been intensively studied in recent years because they are supposed to record evidence for UHT metamorphism. Detailed petrographic observations, as well as whole rock and mineral chemistry, together with SIMS
[...] Read more.
Spinel- and orthopyroxene-bearing metapelitic granulites exposed in the Bunger Hills, East Antarctica, have been intensively studied in recent years because they are supposed to record evidence for UHT metamorphism. Detailed petrographic observations, as well as whole rock and mineral chemistry, together with SIMS trace element data on quartz, garnet, and orthopyroxene, are presented for these rocks. Mineral thermobarometry, including Al-in-orthopyroxene, ternary feldspar, Ti-in-quartz, and Fe-Ti oxide solvus, has been used to quantify the UHT conditions. Based on phase equilibrium modeling, a tight clockwise P-T path has been deduced, which involves near-isobaric heating at 6–7 kbar to ~950 °C followed by near-isobaric to slightly up-pressure cooling at 5–6 kbar to ~750 °C. It is concluded that the outlined metamorphic history is characteristic of an extensional crustal regime which is also evidenced by the correlation of prograde and retrograde metamorphism with the extensional and compressional phases of major ductile deformations recognized in the region. In order to constrain the tectonic setting of the granulites, this result is discussed in the context of current views on the Mesoproterozoic evolution of the Albany-Fraser Orogen, the westernmost part of which the Bunger Hills are considered to be.
Full article
(This article belongs to the Section Mineral Deposits)
►▼
Show Figures
Figure 1
Open AccessArticle
Study on Ultra-Long-Distance Transportable Concentration Gradient of Coal Gangue Slurry with Different Gradations
by
Shi Wang, Haigen Yu, Rui Wu, Mingkun Tang, Yaohua Liu, Long Liu and Xuepeng Song
Minerals 2024, 14(5), 487; https://doi.org/10.3390/min14050487 - 3 May 2024
Abstract
Coal gangue, the primary solid waste generated during the coal mining process, is typically disposed of on the surface, where it gradually accumulates to form gangue piles that significantly contaminate the surrounding environment. Filling technology has been widely employed for the safe and
[...] Read more.
Coal gangue, the primary solid waste generated during the coal mining process, is typically disposed of on the surface, where it gradually accumulates to form gangue piles that significantly contaminate the surrounding environment. Filling technology has been widely employed for the safe and efficient disposal of coal gangue due to its sustainability, safety, and efficiency. However, there is still a lack of theoretical research on the concentration of gangue slurry in long-distance filling pipeline transportation. Therefore, a calculation model of the ultra-long-distance transportable concentration of coal gangue slurry with different grades was constructed based on the static anti-segregation performance and Bingham model. In addition, the relevant parameters of the calculation model of the ultra-long-distance transportable concentration of coal gangue slurry in this mine were determined using the 8 km pipeline transport of coal gangue slurry in one mine as the technical background. It was subsequently demonstrated that the yield stress, plastic viscosity, and mass concentration of the various grades of gangue slurry in this mine exhibit an increasing exponential function, while the slurry density and mass concentration exhibit an increasing linear function, and the mass concentration and actual flow rate correspond to a quadratic polynomial increment. Finally, the minimum and maximum concentrations for different grades of gangue slurry that can be transported over long distances in this mine were determined. This work provides theoretical and practical guidance on how to select the concentration of gangue slurry for long-distance pipeline transport.
Full article
(This article belongs to the Section Environmental Mineralogy and Biogeochemistry)
►▼
Show Figures
Figure 1
Open AccessReview
Are Clay Minerals Systematically the Products of Aqueous Alteration in Cosmic Bodies?
by
Abderrazak El Albani, Ibtissam Chraiki, Hasnaa Chennaoui Aoudjehane, Mohamed Ghnahalla, Fatima Abdelfadel, Ahmed Abd Elmola, Olabode Bankole, Julie Ngwal’ghoubou Ikouanga, Anna El Khoury, Claude Fontaine, El Hafid Bouougri, France Westall and Alain Meunier
Minerals 2024, 14(5), 486; https://doi.org/10.3390/min14050486 - 3 May 2024
Abstract
The formation of chondrite materials represents one of the earliest mineralogical processes in the solar system. Phyllosilicates are encountered at various stages of the chondrule formation, from the initial stages (IDP agglomerates) to the final steps (chondrule internal alteration). While typically linked to
[...] Read more.
The formation of chondrite materials represents one of the earliest mineralogical processes in the solar system. Phyllosilicates are encountered at various stages of the chondrule formation, from the initial stages (IDP agglomerates) to the final steps (chondrule internal alteration). While typically linked to aqueous alteration, recent studies reveal that phyllosilicates could precipitate directly from residual fluids in post-magmatic or deuteric conditions and under a wide range of temperatures, pressures, water/rock ratios, and H2/H2O ratio conditions. This study re-examined the formation of hydrated phyllosilicates in chondrules and associated fine-grained rims (FGRs) using published petrographical, mineralogical, and chemical data on carbonaceous chondrites. Given that chondrules originate from the melting of interplanetary dust particles, the water liberated by the devolatilization of primary phyllosilicates, including clay minerals or ice melting, reduces the melting temperature and leads to water dissolution into the silicate melt. Anhydrous minerals (e.g., olivine and diopside) form first, while volatile and incompatible components are concentrated in the residual liquid, diffusing into the matrix and forming less porous FGRs. Serpentine and cronstedtite are the products of thermal metamorphic-like mineral reactions. The mesostasis in some lobated chondrules is composed of anhydrous and hydrous minerals, i.e., diopside and serpentine. The latter is probably not the alteration product of a glassy precursor but rather a symplectite component (concomitant crystallization of diopside and serpentine). If so, the symplectite has been formed at the end of the cooling process (eutectic-like petrographical features). Water trapped inside chondrule porosity can lead to the local replacement of olivine by serpentine without external water input (auto-alteration). In the absence of water, hydrated phyllosilicates do not crystallize, forming a different mineral assemblage.
Full article
(This article belongs to the Section Clays and Engineered Mineral Materials)
►▼
Show Figures
Figure 1
Open AccessArticle
A Late Jurassic Epithermal Pb-Zn Deposit: Insights from Rb-Sr Dating of Quartz-Hosted Fluid Inclusions and Sphalerite Chemical Composition
by
Zheng Xia, Zengxia Zhao, Xiang Zou and Lei Liu
Minerals 2024, 14(5), 485; https://doi.org/10.3390/min14050485 - 2 May 2024
Abstract
The Kangjiawan Pb-Zn deposit, situated within the Shuikoushan polymetallic ore field in Changning, Hunan Province, China, is a large-scale Pb-Zn deposit unearthed in 1976. Based on detailed geological field investigations, this study presents the results of the Rb-Sr isotopic dating, electron probe microanalyses
[...] Read more.
The Kangjiawan Pb-Zn deposit, situated within the Shuikoushan polymetallic ore field in Changning, Hunan Province, China, is a large-scale Pb-Zn deposit unearthed in 1976. Based on detailed geological field investigations, this study presents the results of the Rb-Sr isotopic dating, electron probe microanalyses (EPMAs), and LA-ICP-MS analyses of the Kangjiawan Pb-Zn deposit in order to determine the ore-forming age and the occurrence of trace elements in sphalerite and thereby constrain the genesis of the deposit. The Rb-Sr dating of quartz-hosted fluid inclusions yielded an Rb-Sr isochron age of 150 ± 4 Ma, with an initial 87Sr/86Sr ratio of 0.71101 ± 0.00008 (MSWD = 1.1), suggesting that the Pb-Zn mineralization of the Kangjiawan deposit took place during the Late Jurassic, coeval with the magmatic activities within the ore field. EPMA and LA-ICP-MS analyses showed that Fe, Mn, and Cd were primarily incorporated into the sphalerite lattice through isomorphous substitution. Specifically, Fe and Mn substituted for Zn, whereas Cd replaced both Fe and Zn. Other elements such as Cu, Sb, and Sn occurred within the sphalerite lattice through mineral micro-inclusions or isomorphic substitution. EPMAs and LA-ICP-MS results showed that the FeS contents in sphalerite were less than 14.33%, with corresponding ore-forming temperatures below 259 °C. The LA-ICP-MS results showed that sphalerites from the Kangjiawan Pb-Zn deposit had relatively high Ga/In ratios ranging from 0.01 to 144, providing further support for medium-to-low-temperature mineralization. The trace element compositions of sphalerites from the Kangjiawan Pb-Zn deposit exhibit skarn-type characteristics, suggesting a potential association with contemporary magmatic activities within the Shuikoushan ore field. During the Late Jurassic, extensive granitic magmatic activities occurred in the study area. At the late stage of magma crystallization, hydrothermal fluid containing Pb and Zn precipitated at medium-to-low temperatures and generated the Kangjiawan Pb-Zn deposit.
Full article
(This article belongs to the Special Issue Ag-Pb-Zn Deposits: Geology and Geochemistry)
►▼
Show Figures
Figure 1
Open AccessArticle
A New Insight into the Genesis of Graphite Deposits in Madagascar Using U‒Pb Zircon Dating and Electron Microprobe Analysis
by
Ming-Jian Yang, Yong-Jun Di, Da Zhang, Da-Tian Wu, Ye Fang and Xin-Ming Zhang
Minerals 2024, 14(5), 484; https://doi.org/10.3390/min14050484 - 2 May 2024
Abstract
Madagascar is globally recognized as an important producer of high-quality flaky graphite. However, current research on graphite deposits in Madagascar remains insufficient. Previous studies have linked the genesis of Madagascan graphite deposits to the metamorphism of sedimentary organic matter. Here, we provide a
[...] Read more.
Madagascar is globally recognized as an important producer of high-quality flaky graphite. However, current research on graphite deposits in Madagascar remains insufficient. Previous studies have linked the genesis of Madagascan graphite deposits to the metamorphism of sedimentary organic matter. Here, we provide a case study of graphite deposits in Madagascar, combining new data from the Ambahita graphite deposit (AMG) in southern Madagascar with data from the Antanisoa graphite deposit (ANG) in central Madagascar and the Vohitasara graphite deposit (VOG) on the east coast of Madagascar. We note that the mineral assemblages of graphite-bearing rocks in the AMG, ANG, and VOG are not typical of metamorphic mineral assemblages but rather the results of filling and metasomatism by mantle-derived fluids that occurred after peak metamorphism. Electron microprobe analysis indicates that the graphite of the AMG, VOG, and ANG is usually associated with phlogopite or Mg-biotite; the phlogopite shares a common genesis with other widespread phlogopite deposits across Madagascar. We reveal that the distribution of graphite deposits in Madagascar is primarily controlled by ductile shear zones between blocks. Ductile shear zones that extend deep into the mantle can provide an ideal migration channel and architecture for the emplacement of mantle-derived fluids. The graphite mineralization formed no earlier than the peak metamorphism (490 Ma) and no later than the intrusion of pegmatite veins (389 ± 5 Ma). The distribution of graphite deposits, graphite orebody morphologies, mineral associations, and geochemical data suggest that the genesis of graphite deposits in Madagascar is linked to mantle-derived fluid filling rather than the metamorphism of sediments, as previously suggested. These findings have important implications for similar deposits in Madagascar and potentially globally.
Full article
(This article belongs to the Special Issue Microbeam Analysis Characterization in Petrogenesis and Ore Deposit)
Open AccessArticle
New Insights into the Role of Thiol Collectors in Malachite Flotation
by
Congren Yang, Siying Chen, Haodong Li and Wenqing Qin
Minerals 2024, 14(5), 483; https://doi.org/10.3390/min14050483 - 30 Apr 2024
Abstract
Malachite is one of the most important copper-bearing oxide minerals; however, it shows poor floatability prior to sulfidization under the thiol collector system. This study investigated the reasons for the low recovery of malachite flotation without sulfidization. The results of adsorption capacity and
[...] Read more.
Malachite is one of the most important copper-bearing oxide minerals; however, it shows poor floatability prior to sulfidization under the thiol collector system. This study investigated the reasons for the low recovery of malachite flotation without sulfidization. The results of adsorption capacity and contact angle test indicated that the malachite surface could adsorb a sufficient amount of the collector, obviously increasing the hydrophobicity of the malachite surface under static conditions. By measuring the amount of inorganic carbon in the flotation solution, it was found that the amount of inorganic carbon in the solution increased significantly when the thiol collectors were added into pulp, which could be attributed to the induced dissolution of the malachite surface by thiol collectors. Solubility tests further demonstrated that the copper ions released from the natural dissolution of malachite proved difficult in regard to reactions with thiol collector to form precipitates; however, the thiol collector induced the dissolution of malachite surface, and so the hydrophobic complexes’ copper-collector could not firmly adsorb on the mineral surface. Fourier transform infrared (FTIR) analysis revealed that thiol collectors do not adsorb stably on malachite surfaces. This was considered to be a substantial reason for the poor performance of malachite flotation without sulfidization.
Full article
(This article belongs to the Section Mineral Processing and Extractive Metallurgy)
►▼
Show Figures
Figure 1
Open AccessArticle
Fluorescence-Based Image Analysis of Seepage Behavior in Drip Irrigation: Exploring Varied Fractal Grading in Media Permeability
by
Xiaolong Wang, Junjie Huang, Xiang Li, Wenbin Yuan, Hongchang Liu, Min Gan, Jun Wang and Yansheng Zhang
Minerals 2024, 14(5), 482; https://doi.org/10.3390/min14050482 - 30 Apr 2024
Abstract
In the recycling of low-value metallic elements, heap leaching is commonly employed. The particle size distribution is a crucial parameter in heap leaching implementation, and the percolation behavior of a heap has always been a focal point in heap leaching technology. This paper
[...] Read more.
In the recycling of low-value metallic elements, heap leaching is commonly employed. The particle size distribution is a crucial parameter in heap leaching implementation, and the percolation behavior of a heap has always been a focal point in heap leaching technology. This paper utilizes a novel form of ultraviolet fluorescence image acquisition and fluorescence image analysis to investigate the percolation process with different fractal dimension particle size distributions, where the maximum particle diameter is 10 mm. The ore used was low-grade copper ore. The results indicate that the new fluorescence image analysis method can reveal different percolation regions during the heap leaching process, aiding in a better understanding of heap leaching behavior. The combined study found that under irrigation conditions of 10 mL/min, seepage was more uniform under the heap structure formed by a particle gradation with a fractal dimension of 2.2.
Full article
(This article belongs to the Section Mineral Processing and Extractive Metallurgy)
►▼
Show Figures
Figure 1
Open AccessArticle
Characterization of a Metamorphosed Volcanic Stratigraphy and VMS Alteration Halos Using Rock Chip Petrography and Lithogeochemistry: A Case Study from King North, Yilgarn Craton, Western Australia
by
Jamie Kelly, Steven P. Hollis, Cendi D. P. Dana, Allan Kneeshaw, Darryl Podmore, Megan James, Riquan Azri, Conal Rodgers and Stephen Roberts
Minerals 2024, 14(5), 481; https://doi.org/10.3390/min14050481 - 30 Apr 2024
Abstract
Despite countless advances in recent years, exploration for volcanogenic massive sulfide (VMS) deposits remains challenging. This is particularly the case in the Yilgarn Craton of Western Australia, where outcrop is limited, weathering is deep and extensive, and metamorphism is variable. At Erayinia in
[...] Read more.
Despite countless advances in recent years, exploration for volcanogenic massive sulfide (VMS) deposits remains challenging. This is particularly the case in the Yilgarn Craton of Western Australia, where outcrop is limited, weathering is deep and extensive, and metamorphism is variable. At Erayinia in the southern Kurnalpi terrane, intercepts of VMS-style mineralization occur along ~35 km strike length of stratigraphy, and a small Zn (-Cu) deposit has been defined at King (2.15 Mt at 3.47% Zn). An extensive aircore and reverse circulation drilling campaign on the regional stratigraphy identified additional VMS targets, including the King North prospect. Through a combination of detailed rock chip logging, petrography (inc. SEM imaging), and lithogeochemistry, we have reconstructed the volcanic stratigraphy and alteration halos associated with the King North prospect. Hydrothermal alteration assemblages and geochemical characteristics at King North (Mg-Si-K enrichment, Na depletion, and high Sb, Tl, Eu/Eu*, alteration index, CCPI, and normative corundum abundance values) are consistent with an overturned VMS system. The overturned footwall stratigraphy at King North is dominated by metamorphosed volcanic rocks, namely the following: garnet amphibolite (tholeiitic, basaltic), biotite amphibolite (andesitic, calc-alkaline), chlorite–quartz schist (dacitic), and narrow horizons of muscovite–quartz schist (dacitic to rhyolitic, HFSE-enriched). The hanging-wall to the Zn-bearing sequence is characterized by quartz–albite schists (metasedimentary rocks) and thick sequences of amphibolite (calc-alkaline, basaltic andesite). An iron-rich unit (>25% Fe2O3) of chlorite–actinolite–quartz schist, interpreted as a meta-exhalite, is associated with significant Cu-Au mineralization, adjacent to a likely syn-volcanic fault. Extensive Mg metasomatism of the immediate felsic footwall is represented by muscovite–chlorite schist. Diamond drilling into the deep hanging-wall stratigraphy at both King North and King has also revealed the potential for additional, stacked VMS prospective horizons in the greenstone belt stratigraphy. The discovery of HFSE-enriched rhyolites, zones of muscovite–chlorite schist, presence of abundant sulfide-rich argillaceous metasedimentary rocks, and a second upper meta-exhalite horizon further expand the exploration potential of the King–King North region. Our combined petrographic and lithogeochemical approach demonstrates that complex volcanic lithologies and VMS alteration signatures can be established across variably metamorphosed greenstone belts. This has wider implications for more cost-effective exploration across the Yilgarn Craton, utilizing RC drilling to reconstruct the local geology and identify proximal halos, and limiting more costly diamond drilling to key areas of complex geology and deeper EM targets.
Full article
(This article belongs to the Special Issue Mineralization and Geochemistry of VMS Deposits)
►▼
Show Figures
Figure 1
Open AccessArticle
A Study on the Production of Anhydrous Neodymium Chloride through the Chlorination Reaction of Neodymium Oxide and Ammonium Chloride
by
Joo-Won Yu and Jei-Pil Wang
Minerals 2024, 14(5), 480; https://doi.org/10.3390/min14050480 - 30 Apr 2024
Abstract
The chlorination mechanism of neodymium oxide for the production of anhydrous neodymium chloride was analyzed based on the reaction temperature and reaction ratio of ammonium chloride, considering the suppression of the generation of NdOCl, an intermediate product of the reaction process. The results
[...] Read more.
The chlorination mechanism of neodymium oxide for the production of anhydrous neodymium chloride was analyzed based on the reaction temperature and reaction ratio of ammonium chloride, considering the suppression of the generation of NdOCl, an intermediate product of the reaction process. The results were obtained by distinguishing the shape of the produced NdCl3 (powder and bulk) and the setup of the chlorination equipment, reflecting its sensitivity to moisture and oxygen. The powdered form of NdCl3 produced at 400 °C and under argon gas flow was identified as NdCl3·6(H2O), while the bulk form of NdCl3 produced by melting at 760 °C after a chlorination process consisted of anhydrous NdCl3 and NdCl3∙n(H2O). The powdered NdCl3 produced in an argon gas environment with a controlled level of oxygen (below 16.05 ppm) and moisture (below 0.01 ppm) content was identified as single-phase anhydrous NdCl3 and showed the highest chlorination conversion rate of 98.65%. The addition of overstoichiometric ratios of NH4Cl in the chlorination process decreased the total amount of impurities (N, H, and O) in the NdCl3 product and increased the conversion rate of NdCl3.
Full article
(This article belongs to the Special Issue Thermodynamics, Mechanism and Kinetics of Metallurgical Processes)
►▼
Show Figures
Figure 1
Journal Menu
► ▼ Journal Menu-
- Minerals Home
- Aims & Scope
- Editorial Board
- Reviewer Board
- Topical Advisory Panel
- Instructions for Authors
- Special Issues
- Topics
- Sections & Collections
- Article Processing Charge
- Indexing & Archiving
- Editor’s Choice Articles
- Most Cited & Viewed
- Journal Statistics
- Journal History
- Journal Awards
- Conferences
- Editorial Office
Journal Browser
► ▼ Journal BrowserHighly Accessed Articles
Latest Books
E-Mail Alert
News
Topics
Topic in
Applied Sciences, Minerals, Materials, Energies, Buildings
New Trends in Rock Materials Mechanics and Engineering Geology
Topic Editors: Hang Lin, Yanlin Zhao, Yixian Wang, Yu Chen, Rihong CaoDeadline: 20 May 2024
Topic in
Applied Sciences, Energies, Minerals, Mining, Sustainability
Mining Innovation
Topic Editors: Krzysztof Skrzypkowski, René Gómez, Fhatuwani Sengani, Derek B. Apel, Faham Tahmasebinia, Jianhang ChenDeadline: 1 June 2024
Topic in
Energies, IJERPH, Minerals, Mining, Safety
Exploring the Mine Environment, Safety Risk and Occupational Health
Topic Editors: Chengyu Xie, Jian Zhou, Danial Jahed Armaghani, Qingfa Chen, Wei PanDeadline: 30 June 2024
Topic in
Remote Sensing, Energies, Minerals, Geosciences, Geotechnics
Support Theory and Technology of Geotechnical Engineering
Topic Editors: Qi Wang, Bei Jiang, Xuezhen Wu, Hongke GaoDeadline: 20 July 2024
Conferences
Special Issues
Special Issue in
Minerals
Characterization of Minerals and Raw Materials Resources Replenishment
Guest Editors: Sofia Barbosa, José António de AlmeidaDeadline: 10 May 2024
Special Issue in
Minerals
Geochemistry and Mineralogy of Coal-Bearing Rocks, 2nd Edition
Guest Editors: Magdalena Misz-Kennan, Monika J. Fabiańska, Justyna Ciesielczuk, Marek SzczerbaDeadline: 24 May 2024
Special Issue in
Minerals
Chemo-Physical Evolution, Microstructural Modifications and Hydro-Mechanical Behaviour of Treated Soils of Different Mineralogical Composition
Guest Editors: Giacomo Russo, Enza Vitale, Manuela CecconiDeadline: 31 May 2024
Special Issue in
Minerals
UHP Minerals as Messengers of Deep Mantle from the Mantle Transition Zone and Beyond
Guest Editors: Asish Basu, Souvik Das, Jingsui YangDeadline: 14 June 2024
Topical Collections
Topical Collection in
Minerals
Clays and Other Industrial Mineral Materials
Collection Editors: Manuel Pozo Rodríguez, Francisco Franco, Michael Stamatakis
Topical Collection in
Minerals
Critical Metals and Minerals in Coal and Coal Combustion Products
Collection Editors: Shifeng Dai, David French
Topical Collection in
Minerals
Bioleaching
Collection Editors: Anna Kaksonen, Sabrina Hedrich, Elaine Govender-Opitz, Mario Vera
Topical Collection in
Minerals
New Minerals
Collection Editors: Irina O. Galuskina, Igor V. Pekov, Zhenyu Chen