Next Article in Journal
Synthesis and Biological Activity of N-Substituted-3-chloro-2-azetidinones
Previous Article in Journal
Synthesis and Bioevaluation of 5-Fluorouracil Derivatives
 
 
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Article

Syntheses of Calix[4]Pyrroles by Amberlyst-15 Catalyzed Cyclocondensations of Pyrrole with Selected Ketones

by
Shive Murat Singh Chauhan
*,
Bhaskar Garg
and
Tanuja Bisht
Bioorganic Research Laboratory, Department of Chemistry, University of Delhi, Delhi-110007, India
*
Author to whom correspondence should be addressed.
Molecules 2007, 12(11), 2458-2466; https://doi.org/10.3390/12112458
Submission received: 1 October 2007 / Revised: 1 November 2007 / Accepted: 1 November 2007 / Published: 9 November 2007

Abstract

:
A facile and efficient protocol is reported for the synthesis of calix[4]pyrroles and N-confused calix[4]pyrroles in moderate to excellent yields by reaction of dialkyl or cycloalkyl ketones with pyrrole catalyzed by reusable Amberlyst™-15 under eco-friendly conditions.

Introduction

The design and synthesis of receptors to recognize, sense and bind the anions is an important area of supramolecular chemistry [1,2,3,4,5]. Calix[4]pyrroles are conformationally flexible macrocycles [6,7] of significant importance due to their binding under different conditions with anions [8], neutral substrates [9] and metal ions [10]. The complexation behavior of calix[4]pyrroles with anions and cations has been widely studied using fluorescent [11], colorimetric [12] and electrochemical signaling [13] devices. They find interesting applications as raw materials for transformation into novel calix[4]pyridines and calix[4]pyridinopyrroles [14], as new solid supports capable of separating anion mixtures [15], in optical recognition of organic vapors [16] and as biologically active species [17]. Porphyrinogens, bearing hydrogen atoms at meso positions, are key intermediates in biological and chemical synthesis of porphyrins [18,19]. Various attempts have been made for the development of milder methods for the synthesis of porphyrins [20,21,22], N-C isomerization [23,24] and higher homologues of porphyrins [25]. The meso-octamethylcalix[4]pyrrole 3a has been prepared by condensation of pyrrole with acetone in the presence of aqueous hydrochloric acid or methanesulfonic acid in methanol [26,27]. The reaction of pyrrole and acetone in the presence of trifluoroacetic acid in ethanol gave meso-octamethylcalix[4]pyrrole (3a) and the N-confused octamethylcalix[4]pyrrole (4b) [28]. The reactions of pyrrole with dialkyl ketones in the presence of protic acids (HCl, H2SO4), organic acids (CH3SO3H) and Lewis acids (BBr3 and BF3) have also been used in the synthesis of calix[4]pyrroles [29,30,31,32,33]. The reaction of excess of pyrrole with dialkylketones in the presence of acid gave 5,5-dialkyldipyrromethanes which on subsequent reaction with dialkylketones in the presence of borontrifluoride-etherate formed strapped calix[4]pyrroles [34,35]. These acids are considered hazardous and corrosive and their removal from the reaction mixtures is difficult. Recently, condensations in dichloromethane of pyrrole with dialkyl ketones in the presence of the molecular sieve Al-MCM-41 and the zeolite HY afforded dipyrromethane, calix[4]pyrroles and other linear products, but not the N-confused calix[4]pyrroles [36,37].
Scheme 1.
Scheme 1.
Molecules 12 02458 g001
Amberlyst™-15 is an inexpensive and non-hazardous solid acid, useful as a catalyst. It can be easily handled and is removed from reaction mixtures by simple filtration. In recent years Amberlyst™-15 has been explored as a powerful catalyst for various organic transformations [38]. The reaction of pyrrole with different aldehydes in dichloromethane in the presence of AmberlystTM-15 gave dipyrromethanes, which in the presence of excess aldehydes followed by oxidation with chloronil [39] or DDQ [40] gave 5,10,15,20-tetraaryl porphyrins, whereas the reaction of pyrrole with aldehydes in the absence of solvent followed by oxidation with DDQ gave 5,10,15-triarylcorroles [40]. Herein we report an eco-friendly synthesis of calix[4]pyrroles and related products under mild reaction conditions by the reaction between ketones and pyrrole catalyzed by Amberlyst™-15.

Results and Discussion

The reaction in dichoromethane of pyrrole (1) with acetone for 8 hrs in the presence of Amberlyst™-15 (10 %, w/w) gave the calix[4]pyrrole 3a and the N-confused calix[4]pyrrole 4a in 83 and 14 % yield, respectively (Scheme 1, Table 1). On the other hand, an Amberlite™ IR-120 catalyzed reaction of pyrrole with acetone afforded 3a and 4a in poorer yields (61.3 and 3.7 %). The same reaction was examined using different solvents and the best yields were obtained in dichloromethane (Table 1).
Table 1. Amberlyst™-15 catalyzed condensation of pyrrole and acetone in different solvents a.
Table 1. Amberlyst™-15 catalyzed condensation of pyrrole and acetone in different solvents a.
EntrySolventIsolated yield of 3a (%)Isolated yield of 4a (%)
1EtOH (MeOH) [41] 75, (65 [28], 65 [41])10, (26 [28], 15 [41])
2CHCl3658.6
3C6H640-
4EtOAc43-
5THF60-
6DMF33-
7Toluene41-
8DCM83, 77, 69 b , (70.3 [36])14, 10, 5.8 b (0 [36])
a Reaction conditions: pyrrole (7.2 mmol) and acetone (7.2 mmol); solvent (10 mL); Amberlyst™-15 dried (10%, w/w); r.t.; 8 hrs; b Catalyst was reused over three runs.
This high yield formation of 3a and 4a in the presence of Amberlyst™-15 prompted us to examine the reaction in dichloromethane of other ketones 3b-3g with pyrrole. The reaction products, yields and physical data are given in Table 2.
Table 2. Reaction of different ketones (2a-2g) with pyrrole in DCM, catalyzed by Amberlyst™-15.
Table 2. Reaction of different ketones (2a-2g) with pyrrole in DCM, catalyzed by Amberlyst™-15.
Entry2CatalystaTime (h)% Conversion of pyrrole% yieldb/mp °C (lit. mp °C, [ref.])
34
12aAmberlyst™-15899.083.0/295 (296 [27])14.0/ 185 (184 -185 [41])
22aAmberlite-IR-1201265.661.3/295 (296 [27])3.7/185 (184 -185 [41])
32bAmberlyst™-151087.078.0/144 (146 [42])9.0/121
42cAmberlyst™-1548 (32)c72.068.3 (71.1)c/222 (–)
52dAmberlyst™-15896.779.7 /235 (236 [42])13.5 /198
62eAmberlyst™-15898.583.5 (53.0 [43])/273 (271-272 [43])11.3 (5.0 [43])/224 (223.2-223.6 [43])
72fAmberlyst™-1560 (55)c33.030.2 (46.0)c/163 (–)
82gAmberlyst™-1572 (64)c24.919.7 (40.0)c/223 (–)
a Amberlyst™-15, Amberlite™-IR-120 were dried before use; b Isolated yields; c Under reflux conditions in absolute ethanol

Product Characterization

A strong N-H stretching peak appeared at 3450 cm-1 in the IR spectra of calix[4]pyrrole 3a in both CHCl3 solution and KBr pellets. In the 1H-NMR spectrum of 3a a sharp singlet at δ 1.50 is assigned to the eight bridge methyl groups, a doublet at δ 5.89 (J = 2.5 Hz) to the eight pyrrole ring β-protons and a broad peak at δ 7.01 was assigned to the four N-H protons. The ratio of the integrated peak areas are 6:2:1, in agreement with the empirical formula and D4 symmetry of 3a. In the 1H-NMR spectrum of 4a the appearance of a multiplet at δ 1.56-1.48 for the eight bridge methyl groups, signals at δ 6.30 and δ 5.50 corresponding to the α- and β-pyrrole hydrogens (1H each) of the 2,4-disubstituted pyrrole, respectively, well apart from those of the 2,5-disubstituted pyrrole β-hydrogen atoms (δ 5.93-6.04, 6H) and three broad peaks at δ 7.75 (1H), 7.41 (1H) and 7.26 (2H) for four N-H protons indicate the reduction of symmetry as compared to 3a. Indeed, the higher polarity and non-zero dipole moment of N-confused calix[4]pyrrole than calix[4]pyrrole have been attributed to this lower symmetry [50]. Calix[4]pyrrole 3a and N-confused calix[4]pyrrole 4a each gave a [M-H]- ion peak at 427.2860 and 427.2868, respectively, along with a peaks at 462.7863 and 462.7859 for the [M+Cl]- ion at 65V (cone voltage) in negative ion ESI-MS. A detailed ESI-MS study of these macrocycles has been reported recently [44]. The structures of calix[4]pyrroles 3a-3g and N-confused calix[4]pyrroles 4a, 4b, 4d and 4e were all confirmed by their physical and spectroscopic data (Table 2, Table 3 and Table 4).
In the reactions of 2a, 2d and 2e with pyrrole, a third isomer (1-4 %) was also observed, but due to small sample availability and poor solubility in organic solvents a detailed structural characterization was not possible [28]. The reactions of cycloheptanone (2f) and cyclooctanone (2g) with pyrrole gave the corresponding calix[4]pyrroles 3f and 3g in 30.2% and 19.7% yield at ambient temperature, but the time required for the conversions was considered too long. By refluxing the reaction mixtures, improved yields of 46.0 % (3f) and 40.0 % (3g) were obtained after shorter reaction times. In the reactions of pyrrole with 2c, 2f and 2g, the corresponding N-confused calix[4]pyrroles could not be isolated. This could be attributed to the steric hindrance encountered with these higher acyclic and cyclic ketones. The C-2 and C-5 atoms are more reactive than the C-3 and C-4 positions in pyrrole, hence the electrophilic reaction at C-2 and C-5 position of pyrrole with acetone in the presence of acid gave calix[4]pyrrole in preference to N-confused calix[4]pyrrole [28,43]. The data presented in Table 1 and Table 2 indicates that Amberlyst™-15 is a more efficient and superior catalyst than other solid catalysts for the formation of calix[4]pyrroles in DCM [36]. The recovered catalyst was recycled twice with modest product yield loss being noted (Table 1). The catalytic activity of Amberlyst™-15 is remarkable and it is environmentally benign. The ready commercial availability of this catalyst and its superiority over the existing methods should make the present protocol an attractive addition to the many conventional procedures.

Conclusions

A facile and efficient method has been developed for preparing a variety of calix[4]pyrroles and N-confused calix[4]pyrroles in high yields by the reactions of various ketones with pyrrole in dichloromethane in the presence of a catalytic amount of Amberlyst™-15.
Table 3. 1H-NMR and mass spectra of meso-octaalkyl and cycloalkyl calix[4]pyrroles 3a-3g.
Table 3. 1H-NMR and mass spectra of meso-octaalkyl and cycloalkyl calix[4]pyrroles 3a-3g.
Calix.1H-NMR spectra (298 K, δ = ppm)aHRMS (ESI-MS)b
3a7.01 (4H, br s, NH), 5.89 (8H, d, J=2.5 Hz, β-pyrrole), 1.50 (24 H, s)C28H36N4 [M-H]- : calcd : 427.2862, found : 427.2860.
3b6.97 (4H, br s, NH), 5.80 (8H, d, J=2.5 Hz, β-pyrrole), 1.79-1.76 (8H, q, -CH2-), 1.45-1.18 (12H, br s, CH3), 0.80-0.63 (12 H, t, CH3-)C32H44N4 [M-H]- : calcd : 483.3487, found : 483.3480.
3c7.05 (4H, br s, NH), 5.89 (8H, d, J=2.3 Hz, β-pyrrole), 1.79-1.57 (16H, q, -CH2-), 0.71-0.58 (24 H, t, CH3-)C36H52N4 [M-H]- ; calcd : 539.4113, found : 539.4120.
3d7.03 (4H, br s, NH), 5.85 (8H, d, J=2.3 Hz, β-pyrrole), 2.21-2.00 (16H, m), 1.68-1.44 (16H, m)C36H44N4 [M-H]- : calcd : 531.3488, found : 531.3486.
3e7.25 (4H, br s, NH), 5.89 (8H, d, J=2.5 Hz, β-pyrrole), 1.91-1.90 (16H, m), 1.50-1.41 (24H, m), C40H52N4 [M-H]- : calcd : 587.4114, found : 587.4112.
3f6.88 (4H, br s, NH), 5.83 (8H, d, J=2.5 Hz, β-pyrrole), 2.01-1.94 (16H, m), 1.72-1.52 (32H, m)C44H60N4 [M-H]- Calcd: 643.4817, Found: 643.4810.
3g6.99 (4H, br s, NH), 5.93 (8H, d, J=2.4 Hz, β-pyrrole), 1.97-1.95 (16H, m), 1.52-1.34 (32H, m), 1.23-1.21 (8H, m)C48H68N4 [M-H]- calcd : 699.5443, Found : 699.5456.
a The 1H-NMR spectra of 3a-3g were in agreement with literature data [36]; b The ESI-MS spectra were in agreement with literature data [44].
Table 4. 1H-NMR and mass spectra of meso-octaalkyl and cycloalkyl N-confused calix[4]pyrroles 4a, 4b, 4d, 4e.
Table 4. 1H-NMR and mass spectra of meso-octaalkyl and cycloalkyl N-confused calix[4]pyrroles 4a, 4b, 4d, 4e.
Calix.1H-NMR spectra (298 K, δ = ppm) HRMS (ESI-MS)
4aNH: 7.75 (1H, br), 7.41 (1H, br), 7.26 (2H, br); α-pyrrole: 6.30 (1H, d, J= 2 Hz), β-pyrrole: 6.04 (2H, br), 5.97 (2H, br), 5.93 (2H, m), 5.50 (1H, br); 1.56-1.48 (24H, m) aC28H36N4 [M-H]- : calcd : 427.2862, found : 427.2868
4bNH: 7.63 (1H, br), 7.53 (1H, br), 7.35 (2H, br); α-pyrrole: 6.40 (1H, d, J= 2 Hz) ; β-pyrrole: 6.03 (2H, br), 5.88 (2H, br), 5.78 (2H, m), 5.53 (1H, br); 1.92 (3H, s, -CH3), 1.83-1.12 (29H, m)C32H44N4 [M-H]- : calcd : 483.3487, found : 483.3482.
4dNH: 7.48 (1H, br), 7.29 (1H, br), 7.00 (2H, br); α-pyrrole: 6.42 (1H, d, J=1.97 Hz); β-pyrrole: 6.00 (2H, br), 5.90 (2H, br), 5.88 (2H, m), 5.58 (1H, br); 2.25-1.98 (16H, m), 1.50-1.20 (16H, m)C36H44N4 [M-H]- : calcd : 531.3488, found : 531.3480.
4eNH: 7.63 (1H, br), 7.44 (1H, br), 7.10 (2H, br); α-pyrrole: 6.42 (1H, d, J= 1.98 Hz); β-pyrrole: 6.03 (2H, br), 5.97 (2H, br), 5.82 (2H, m), 5.50 (1H, br); 2.70-2.10 (16H, m), 1.60-1.20 (24H, m)aC40H52N4 [M-H]- : calcd : 587.4114, found : 587.4110.
a 1H-NMR spectra of N-confused calix[4]pyrroles 4a and 4e are comparable to those reported in [43] and [28] respectively.

Experimental

General

The infrared spectra (IR) were recorded on Perkin Elmer FT-1710 spectrophotometer. 1H-NMR spectra were recorded in CDCl3 with TMS as internal standard on a Bruker Avance 300 MHz spectrophotometer. ESI-MS spectra were recorded on KC ESI 455-TOF mass spectrometer (Micromass, Manchester, UK). The starting materials such as pyrrole, ketones, Amberlyst™-15 and Amberlite™ IR-120 were obtained from Acros USA. Pyrrole and ketones were distilled immediately prior to use. The experimental operations were performed under ambient conditions. Neutral alumina was used for all the chromatographic purifications.

Representative experimental procedure for the preparation of calix[4]pyrroles 3a-g and N-confused calix[4]pyrroles 4a-g: synthesis of meso-octamethylcalix[4]pyrrole (3a) and N-confused octamethyl calix[4]-pyrrole (4a)

Equimolar amount of pyrrole (0.5 mL, 7.2 mmol) and acetone (0.52 mL, 7.2 mmol) were taken up in CH2Cl2 (5 mL). Dry Amberlyst™-15 (10% w/w) was added to the reaction mixture, which was stirred at ambient temperature for the appropriate time (Table 2). The reaction progress was monitored by thin layer chromatography (TLC). After the completion of reaction, the catalyst was removed by filtration and washed thoroughly with CH2Cl2 to dissolve all the contents. The filtrate was concentrated to give the crude product, which was subjected to column chromatography over neutral alumina eluting with petroleum ether-chloroform (9:1, v/v) to afford pure meso-octamethylcalix[4]pyrrole (3a). Further elution of the column with petroleum ether-chloroform (2:3, v/v) gave the N-confused isomer of octametylcalix[4]pyrrole (4a). The above general method is used for the synthesis of different calix[4]pyrroles 3b-3g and N-confused calix[4]pyrroles 4b, 4d and 4e.

Acknowledgments

The authors are thankful to the Department of Science and Technology (Govt. of India) for project no. SR/S1/OC-54/2003 and the Council of Scientific and Industrial Research New Delhi for its financial assistance.

References

  1. Gale, P. A.; Sessler, J. L.; Král, V. Calixpyrroles. Chem. Commun. 1998, 1–8. [Google Scholar] [CrossRef]
  2. Suksai, C.; Tuntulani, T. Chromogenic anion sensors. Chem. Soc. Rev. 2003, 32, 192–202. [Google Scholar]
  3. Stibor, I.; Zlatuskova, P. Chiral recognition of anions. Top. Curr. Chem. 2005, 255, 31–63. [Google Scholar]
  4. Gale, P. A.; Quesada, R. Anion coordination and templated assembly: highlights from 2002-2004. Coord. Chem. Rev. 2006, 250, 3219–3244. [Google Scholar]
  5. Gale, P. A. Structural and molecular recognition studies with acyclic anion receptors. Acc. Chem. Res. 2006, 39, 465–475. [Google Scholar] [CrossRef] [PubMed]
  6. Gale, P. A. Anion and ion-pair receptor chemistry: highlights from 2000 and 2001. Coord. Chem. Rev. 2003, 240, 191–221. [Google Scholar] [CrossRef]
  7. Sessler, J. L.; Camiolo, S.; Gale, P. A. Pyrrolic and polypyrrolic anion binding agents. Coord. Chem. Rev. 2003, 240, 17–55. [Google Scholar] [CrossRef]
  8. Gale, P. A.; Sessler, J. L.; Král, V.; Lynch, V. Calix[4]pyrroles: Old yet new anion-binding agents. J. Am. Chem. Soc. 1996, 118, 5140–5141. [Google Scholar] [CrossRef]
  9. Allen, W. E.; Gale, P. A.; Brown, C. T.; Lynch, V. M.; Sessler, J. L. Binding of neutral substrates by Calix[4]pyrroles. J. Am. Chem. Soc. 1996, 118, 12471–12472. [Google Scholar] [CrossRef]
  10. Bachmann, J.; Nocera, D. G. Multielectron redox chemistry of iron porphyrinogens. J. Am. Chem. Soc. 2005, 127, 4730–4743. [Google Scholar] [CrossRef]
  11. Miyaji, H.; Anzenbacher, P.; Sessler, J. L.; Bleasdale, E. R.; Gale, P. A. Anthracene-linked calix[4]pyrroles: fluorescent chemosensors for anions. Chem. Commun. 1999, 1723–1724. [Google Scholar]
  12. Gale, P. A.; Twyman, L. J.; Handlin, C. I.; Sessler, J. L. A colourimetric calix[4]pyrrole–4-nitrophenolate based anion sensor. Chem. Commun. 1999, 1851–1852. [Google Scholar]
  13. Gale, P. A.; Hursthouse, M. B.; Light, M. E.; Sessler, J. L.; Warriner, C. N.; Zimmerman, R. S. Ferrocene-substituted calix[4]pyrrole: a new electrochemical sensor for anions involving CH...anion hydrogen bonds. Tetrahedron Lett. 2001, 42, 6759–6762. [Google Scholar] [CrossRef]
  14. Král, V.; Gale, P. A.; Anzenbacher, P., Jr.; Jursíková, K.; Lynch, V.; Sessler, J. L.; Anzenbacher, P., Jr. Calix[4]pyridine: a new arrival in the heterocalixarene family. Chem. Commun. 1998, 9–10. [Google Scholar]
  15. He, L. J.; Cai, Q. S.; Shao, S. J.; Jiang, S. X. Effect of calix[4]pyrrole as addition reagent on anion separation in capillary zone electrophoresis (CZE). Chin. Chem. Lett. 2001, 12, 511–512. [Google Scholar]
  16. Conoci, S.; Palumbo, M.; Pignataro, B.; Rella, R.; Valli, L.; Vasapollo, G. Optical recognition of organic vapors through ultra thin calix[4]pyrrole films. Colloid. Surf. A: Physicochem. Eng. Asp. 2002, 198-200, 869–873. [Google Scholar]
  17. Sessler, J. L.; Allen, W. E. Anion carriers: New tools for crossing membranes. Chemtech 1999, 29, 16–24. [Google Scholar]
  18. Floriani, C. The porphyrinogen-porphyrin relationship: the discovery of artificial porphyrins. Chem. Commun. 1996, 1257–1263. [Google Scholar] [CrossRef]
  19. Battersby, A. R.; Leeper, F. J. Biosynthesis of the pigments of life: mechanistic studies on the conversion of porphobilinogen to uroporphyrinogen III. Chem. Rev. 1990, 90, 1261–1274. [Google Scholar] [CrossRef]
  20. Chauhan, S. M. S.; Singh, R.; Gulati, A. Clay catalyzed synthesis of 5,10,15,20-tetrakis-(2,6-dichlorophenyl)porphyrin and related compounds. Ind. J. Heterocycl. Chem. 2000, 9, 231–232. [Google Scholar]
  21. Chauhan, S. M. S.; Sahoo, B. B.; Sriniwas, K. A. Microwave assisted synthesis of 5,10,15,20-tetraarylporphyrins. Synth. Commun. 2001, 31, 33–37. [Google Scholar] [CrossRef]
  22. Ghosh, A. A perspective of one pot pyrrole-aldehyde condensation as versatile self-assembly processes. Angew. Chem. Int. Ed. 2004, 43, 1918–1931. [Google Scholar] [CrossRef]
  23. Maeda, H.; Furuta, H. A dozen years of N-confused: from synthesis to supramolecular chemistry. Pure Appl. Chem. 2006, 78, 29–44. [Google Scholar]
  24. Geier, G. R.; Haynes, D. M.; Lindsey, J. S. An efficient one-flask synthesis of N-confused tetraphenylporphyrin. Org. Lett. 1999, 1, 1455–1458. [Google Scholar] [CrossRef] [PubMed]
  25. Chandrashekar, T. K.; Venkatraman, S. Core-modified expanded porphyrins: new generation organic materials. Acc. Chem. Res. 2003, 36, 676–691. [Google Scholar] [CrossRef] [PubMed]
  26. Baeyer, A. Ueber ein condensation product von Pyrrol mit Aceton. Ber. Dtsch. Chem. Ges. 1886, 19, 2184–2185. [Google Scholar] [CrossRef]
  27. Rothenmund, P.; Gage, C. L. Concerning the structure of acetonepyrrole. J. Am. Chem. Soc. 1955, 77, 3340–3341. [Google Scholar] [CrossRef]
  28. Depraetere, S.; Smet, M.; Dehaen, W. N-confused calix[4]pyrroles. Angew. Chem. Int. Ed. 1999, 38, 3359–3361. [Google Scholar] [CrossRef]
  29. Shao, S.; Wang, A.; Yang, M.; Jiang, S.; Xianda, Yu. Synthesis of meso-aryl-substituted calix[4]pyrroles. Synth. Commun. 2001, 31, 1421–1426. [Google Scholar]
  30. Chen, Q.; Wang, T.; Zhang, Y.; Wang, Q.; Ma, J. Doubly n-confused calix[4]pyrrole prepared by rational synthesis. Synth. Commun. 2002, 32, 1051–1058. [Google Scholar] [CrossRef]
  31. Wu, Y.; Wang, D.; Sessler, J. L. Conformational features and anion binding properties of calix[4]pyrroles: A theoretical study. J. Org. Chem. 2001, 66, 3739–3746. [Google Scholar] [CrossRef] [PubMed]
  32. Anzenbacher, P., Jr.; Jursíková, K.; Lynch, V. M.; Gale, P. A.; Sessler, J. L. Calix[4]pyrroles containing deep cavities and fixed walls. Synthesis, structural studies, and anion binding properties of the isomeric products derived from the condensation of p-hydroxyacetophenone and Pyrrole. J. Am. Chem. Soc. 1999, 121, 11020–11021. [Google Scholar]
  33. Camiolo, S.; Gale, P. A. Fluoride recognition in super-extended cavity calix[4]pyrroles. Chem. Commun. 2000, 1129–1130. [Google Scholar]
  34. Miyaji, H.; Hong, S.; Jeong, D.; Yoon, D.; Na, H.; Hong, J.; Ham, S.; Sesseler, J. L.; Lee, C. A binol-strapped Calix[4]pyrrole as a model chirogenic receptor for the enantioselective recognition of carboxylate anions. Angew.Chem.Int.Ed. 2007, 46, 2508–2511. [Google Scholar] [CrossRef]
  35. Jeong, S.; Yoo, J.; Na, H.; Chi, D.; Lee, C. Strapped-calix[4]pyrroles bearing acridine moiety. Supramolecular Chemistry 2007, 19, 271–275. [Google Scholar] [CrossRef]
  36. Radha Kishan, M.; Srinivas, N.; Raghavan, K. V.; Kulkarni, S. J.; Sarma, J. A. R. P.; Vairamani, M. A novel, shape-selective, zeolite-catalyzed synthesis of calix[4]pyrroles. Chem. Commun. 2001, 2226–2227. [Google Scholar]
  37. Radha Kishan, M.; Radha Rani, V.; Murty, M.R.V.S.; Sita Devi, P.; Kulkarni, S. J.; Raghavan, K.V. Synthesis of calixpyrroles and porphyrins over molecular sieve catalysts. J. Mol. Cat. A. 2004, 223, 263–267. [Google Scholar]
  38. Harmer, M.A. Industrial processes using solid acid catalysts. In Handbook of Green Chemistry and Technology; Clark, J. H., Macquarris, D. J., Eds.; Blackwell Publishers: London, 2002; pp. 86–117. [Google Scholar]
  39. Naik, R.; Joshi, P.; Kaiwar, S. P.; Deshpande, R. K. Facile synthesis of meso-substituted dipyrromethanes and porphyrins using cation exchange resins. Tetrahedron 2003, 59, 2207–2213. [Google Scholar]
  40. Kumari, P. Synthesis of metallocorroles and their use in the oxidation of selected hydrocarbons. Ph.D. Thesis, University of Delhi, 2007; pp. 55–104. [Google Scholar]
  41. Nishibayu, R.; Palacios, M. A.; Dehaen, W.; Anzenbacher, P., Jr. Synthesis, structure, anion binding and sensing by calix[4]pyrrole isomers. J. Am. Chem. Soc. 2006, 128, 11496–11504. [Google Scholar] [CrossRef] [PubMed]
  42. Dey, S.; Pal, K.; Sarkar, S. An efficient and eco-friendly protocol to synthesize calix[4]pyrroles. Tetrahedron Lett. 2006, 47, 5851–5854. [Google Scholar] [CrossRef]
  43. Anzenbacher, P., Jr.; Nishibayu, R.; Palacios, M. A. N-confused calix[4]pyrrole. Coord. Chem. Rev. 2006, 250, 2929–2938. [Google Scholar]
  44. Bhaskar, G.; Prabhakar, S.; Ramanjaneyulu, G. S.; Vairamani, M.; Srinivasu, V. N. V.; Srinivas, K. Mass spectral studies of meso-dialkyl, alkyl aryl and cycloalkyl calix[4]pyrroles under positive and negative ion electrospray ionization conditions. J. Mass Spectrom. 2007, 42, 1194–1206. [Google Scholar] [CrossRef] [PubMed]
  • Sample Availability: Limited samples of compounds 3a and 3e are available from the corresponding author.

Share and Cite

MDPI and ACS Style

Chauhan, S.M.S.; Garg, B.; Bisht, T. Syntheses of Calix[4]Pyrroles by Amberlyst-15 Catalyzed Cyclocondensations of Pyrrole with Selected Ketones. Molecules 2007, 12, 2458-2466. https://doi.org/10.3390/12112458

AMA Style

Chauhan SMS, Garg B, Bisht T. Syntheses of Calix[4]Pyrroles by Amberlyst-15 Catalyzed Cyclocondensations of Pyrrole with Selected Ketones. Molecules. 2007; 12(11):2458-2466. https://doi.org/10.3390/12112458

Chicago/Turabian Style

Chauhan, Shive Murat Singh, Bhaskar Garg, and Tanuja Bisht. 2007. "Syntheses of Calix[4]Pyrroles by Amberlyst-15 Catalyzed Cyclocondensations of Pyrrole with Selected Ketones" Molecules 12, no. 11: 2458-2466. https://doi.org/10.3390/12112458

Article Metrics

Back to TopTop