Next Article in Journal
Flexible Antibacterial Coatings
Next Article in Special Issue
Enhanced Production of Gypenoside LXXV Using a Novel Ginsenoside-Transforming β-Glucosidase from Ginseng-Cultivating Soil Bacteria and Its Anti-Cancer Property
Previous Article in Journal
Modes of Cell Death Induced by Photodynamic Therapy Using Zinc Phthalocyanine in Lung Cancer Cells Grown as a Monolayer and Three-Dimensional Multicellular Spheroids
Previous Article in Special Issue
The Functional Characterization of a Site-Specific Apigenin 4′-O-methyltransferase Synthesized by the Liverwort Species Plagiochasma appendiculatum
 
 
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Article

AlCl3·6H2O-Catalyzed Friedel-Crafts Alkylation of Indoles by the para-Quinone Methide Moiety of Celastrol

1
School of Pharmaceutical Sciences, Fujian Provincial Key Laboratory of Innovative Drug Target Research, Xiamen University, Xiamen 361102, China
2
Sanford Burnham Prebys Medical Discovery Institute, 10901 N. Torrey Pines Road, La Jolla, CA 92037, USA
*
Authors to whom correspondence should be addressed.
These authors contributed equally to this work.
Molecules 2017, 22(5), 742; https://doi.org/10.3390/molecules22050742
Submission received: 8 March 2017 / Revised: 26 April 2017 / Accepted: 27 April 2017 / Published: 16 May 2017
(This article belongs to the Special Issue Synthesis and Modification of Natural Product)

Abstract

:
A classical Friedel-Crafts alkylation of different indoles catalyzed by AlCl3·6H2O has been developed for a well-known important natural product, celastrol, resulting in a series of derivatives for further biological evaluation. The catalyst loading was reduced to 5 mol %, the reaction proceeds at ambient temperature and reaction time is only 3 h. The product yields range from 20% to 99%. A reaction mechanism is also proposed, based on our experiment results.

Graphical Abstract

1. Introduction

Celastrol is a traditional Chinese medicine, first extracted from Tripterygium wilfordii Hook F. (also known as Thunder of God Vine or by the Chinese name ‘Lei Gong Teng”), which belongs to the Celastraceae family of plant species [1]. Structural determination revealed that celastrol is a pentacyclic triterpenoid possessing a chemically active para-quinone methide (pQM). This functional group could interact with DNA residues [2,3] or target proteins [4] by π-π stacking, hydrophobic interactions, or by forming hydrogen bonds and even covalent bonds [5,6]. Therefore, celastrol has been shown to be effective against many human diseases and also to act via many targets in various cells [7]. For examples, celastrol could suppress the NF-κB (nuclear factor kappa-light-chain-enhancer of activated B cells) activation by targeting cysteine 179 in the IKK (IκB kinase) and showed anti-inflammatory and anti-tumor activities in animal models [8]. Additionally, it could disrupt Hsp90 (heat shock protein 90) and Cdc37 (cell division cycle 37) interaction [9] by binding to the C-terminal domain of Hsp90; it could also induce apoptosis in multiple tumor cells by activating c-Jun N-terminal kinase and suppressing PI3K/Akt (Phosphatidylinositol-4,5-bisphosphate 3-kinase/Protein kinase B) signaling pathways [10]. Recently, it was reported that celastrol could increase leptin sensitivity and is a powerful anti-obesity agent in mouse model [11]. Moreover, celastrol was also found to be a potent Aβ lowering compound by reducing the β-cleavage of APP (Amyloid precursor protein) in a transgenic mouse model of Alzheimer’s disease [12,13]. Taken together, celastrol may be a multiple-target bioactive natural product for drug discovery.
Though celastrol appears to be a promising drug lead, it possesses some undesirable pharmacologic properties such as high toxicity [14,15] and poor water solubility and stability [16,17]. More and more medicinal chemistry efforts are being made to design analogues or derivatives of celastrol in order to improve its drug-like properties [18,19,20,21,22,23,24]. So far, chemical modifications of celastrol have largely focused on standard esterifications or amidifications of the C20-carboxylic acid, esterifications or amidifications of the C3-hydroxyl group at ring A and C–C or C–S bond formation by C6 Michael addition on ring B (see Scheme 1, compound 2a).
It is worth noting that in Pan and Zhang’s work [23], two C6-indole substituted celastrols could enhance antiproliferative activity against human hepatocellular carcinoma Bel7402 cancer cells from 1.55 μM (celastrol as control) to 0.01–0.02 μM. However, the formation of C–C bond between indoles and celastrol is inefficient (43–88%), and the catalyst used, scandium(III) triflate, is an extremely active Lewis acid. In addition, scandium(III) triflate is toxic [25] for large-scale production of C6-substituted celastrol derivatives. Therefore, the development of new C–C formation methods is imperative for the lead optimization activities of C6-substituted celastrol analogs. Because celastrol possesses a normal para-quinone methide moiety (ring A and part of ring B), C6-substituted celastrol could be produced by 1,6-conjugate addition of nucleophilic reagents such as indoles to this celestrol methide. Recently, several reports have revealed that the nucleophilic Michael addition could be catalyzed by 30 mol % of Fe(acac)3 (Tris(acetylacetonato)iron(III)) [26], copper-Fe [27], and even a pure organic chiral ligand [28], resulting in excellent yield, high stereoselectivity and enantioselectivity. However, none of these methods have been tried in the chemical modification of celastrol. In this work, we report our development of one novel, efficient and convenient method for the Michael-type Friedel-Crafts addition of indoles to the para-quinone methide of celastrol.

2. Results and Discussion

Firstly, we tested if indole could undergo Friedel-Crafts alkylation by the para-quinone methide of celastrol without metal salt catalysis. The result showed that the yield was only 2% when the reaction was carried out in dichloromethane (DCM) at room temperature for 12 h (Table 1, Entry 1), indicating that this reaction is inefficient and maybe is a self-catalyzed by the carboxyl acid group of celastrol. It was reported that palladium salts could catalyze Friedel-Crafts alkylation [29], so two salts, tetrakis(triphenylphosphine)palladium(0) (Table 1, Entry 2) and palladium(II) acetate (Table 1, Entry 3) were tried under the same reaction conditions and the yield was improved slightly, from 2% to 12% and 28%, respectively, therefore we can conclude that palladium salts, while somewhat better, are not suitable for catalyzing the Friedel-Crafts alkylation between indole and celastrol. We then tested a series of inorganic Lewis acids (Table 1, Entries 4–10) for the reason that they are good at accelerating Friedel-Crafts reactions [30]. We found that aluminum chloride hexahydrate could raise the yield up to 99% when the reaction was run at room temperature in DCM for 12 h (Table 1, Entry 10). Other metal chlorides such as magnesium chloride hexahydrate (Table 1, Entry 7), zinc chloride (Table 1, Entry 8), and iron(III) chloride hexahydrate (Table 1, Entry 9) could also efficiently catalyze the Friedel-Crafts alkylation between indole and celastrol (yields: 64%, 80% and 93%, respectively). On the other hand, aluminium hydroxide failed to catalyze this reaction (Table 1, Entry 5) and the catalytic efficiency of both iron(III) phosphate hexahydrate (Table 1, Entry 4) and hydrated aluminium sulphate (Table 1, Entry 6) was marginally low. Hence, aluminum chloride hexahydrate was selected as the ideal catalyst for our system.
In order to investigate the solvent effect on this reaction, a protic solvent (MeOH, Table 1, Entry 11) was used to replace DCM, but the yield of 3a dropped to 95%. We also tried to increase the solvent polarity (Table 1, Entries 12–15). However, none of the yields retained in high level, dropping to 84–93%. Therefore, DCM was the best solvent for this catalytic process. We also investigated the effect of the reaction time by reducing it from 12 h to 6 h, 3 h, 1.5 h and 0.5 h (Table 1, Entries 10, 16–19), and found that our reaction was finished after 3 h.
Futhermore, the amount of reactant indole could be reduced from 2 eq to 1.2 eq (Table 1, Entries 17, 20–21) without apparent loss of yield (99%). Finally, the amount of catalyst, aluminum chloride hexahydrate, could be reduced to 1 mol % (Table 1, Entries 21, 23–24) and the yield of the product stayed high. However, for the reason that aluminum chloride hexahydrate is cheap and for the convenient weighing of this catalyst, the loading amount was chosen as 5 mol % (0.53 mg). Taken together, the optimal reaction conditions would be that celastrol (1 eq), indole (1.2 eq), catalyst aluminum chloride hexahydrate (5 mol %), solvent (DCM, 1 mL) reaction time (3 h) and room temperature. For the convenient calculation of isolated yields, the amount of celastrol was increased from 0.045 mmol to 0.222 mmol (see the Experimental Section).
With an optimized method in hand, we examined the scope and versatility of the reaction of different indole derivatives with celastrol (see Scheme 2). Firstly, a methyl group was introduced into different positions of the indole ring (compounds 1b1e). It seems that increasing steric hindrance at positions 5, 6 and 7 of the benzene ring moiety of the indole (compounds 1c1e) had no negative effect on the yield (99% for 3c to 3e). However, methylation of the nitrogen atom of the indole ring dropped the yield of 3b to 82%. When the indole ring was hydroxylated at position 4 (1f) or 5 (1j), the yield of its alkylation by the para-quinone methide moiety of celastrol was reduced to 67% (3f) and 90% (3j), respectively. It is interesting to note that methylation of this hydroxyl group (compounds 1i and 1k) restored the yield to 95% (3k) and 97% (3i). The effect of a halogen substituent group such as fluoride, choloride and bromide at different positions of the benzene ring moiety of the indole (compounds 1l1n, 1o1p) was quite similar to that of a methoxyl group (yield 92–97%, see 3l3n, 3o3p).
On the other hand, the incorporation of an electron-withdrawing group such as a cyano group at the C5 position of the indole ring sharply decreased the yield (3n, 20%). Moreover, an aldehyde group, a stronger electron-withdrawing group than a cyano group, only produced traces of product 3g, implying that electron-withdrawing groups on the indole ring have a negative effect on the Friedel-Crafts alkylation of indoles by the para-quinone methide moiety of celastrol.
Furthermore, in order to evaluate the influences of the carboxyl and hydroxyl groups of celastrol in this reaction, we synthesized compounds 2a2c (Scheme 3). The results showed that ethylation of the carboxylic acid of celastrol reduced the catalytic efficiency of aluminum chloride hexahydrate, leading to a yield of only 89% (Scheme 3, 1a2b). Furthermore, if the hydroxyl group was blocked, the reaction yield further dropped to 29% (Scheme 3, 1a2c). Additionally, Friedel-Crafts addition did not occur when the C6 position of celastrol was blocked by a sterically hindered group such as a propan-2-one group (Scheme 3, 1a2d).
According to the reaction mechanism, a 1,2-, 1,4-, and 1,6-addition of dienone could happen for celastrol. However, our experimental results show that the 1,6-conjugate addition of para-quinone methide moiety of celastrol by C3 position of indole occurs. The reason is that the hindrance of the C4-position in ring A of celastrol is larger than at the C2 and C6 position which make 1,4-addition more difficult (see 3D structure of celastrol in Figure S1). Celastrol could produce five carbocationic intermediates (see Scheme S1) catalyzed by AlCl3·6H2O. The yield of reaction products depends on the stability of these five carbocationic intermediates. Apparently, INS4 (intermediate 4, see Scheme S1) is the most stable one and the easiest to attack an indole ring, so the 1,6-addition product of celastrol dominates this reaction. The reaction progress was monitored by TLC (thin-layer chromatography) and HPLC (high-performance liquid chromatography) and only one product was observed from start to end, so other regioisomers did not appear.
Secondly, the regioselectivity of the addition to the indole moiety depends on the stability of indole intermediates generated by the attack of C6 carboncationic celastrol (see Scheme S2). Seven intermediates can be produced in this step. According to our quantum mechanics calculation, the C3 position of indole possesses a more negative charge (−0.383) than other carbon atoms (C2, C4, C5, C6, C7) and hence is easiest to be attacked by C6-celastrol. In the other hand, the carboncationic indole intermediate INS2 (intermediate 2, see Scheme S2) has two forms (indole-INS2-1 and indole-INS2-2) that stabilize the positive charge, which makes the alkylation of C3 prone to occur. That is the origin of the indole regioselectivity.
According to the results, a possible mechanism of this special Friedel-Crafts reaction is proposed in Scheme 4. As aluminium trichloride is a strong Lewis acid, the oxygen atom from the carbonyl group in ring A of celastrol could first form a coordinate bond with the electron-deficient aluminium [31], resulting in an electron migration from C6 to aluminium and then the formation of a cationic species (intermediate IN1). Subsequently, electrophilic addition to the indoles by IN1 to form an arenium ion (also named the Wheland intermediate [32]) (IN2) would occur. Because of the partial elimination of aromaticity, this intermediate is very unstable. Therefore, one of its protons could be removed by a crystallization water of the aluminium trichloride catalyst, forming intermediate IN3. Finally, the chelated aluminium trichloride would be easily removed from IN3 assisted by a protonated crystallization water produced from IN2, yielding the final product.

3. Materials and Methods

3.1. General Information

All the reagents were purchased from Asia Alfa Aesar (Shanghai, China) and J&K Chemical (Beijing, China) and used without further purification. 1H-NMR (600 MHz) and 13C-NMR (151 MHz) spectra were measured on a 600M spectrometer (Bruker in Asia Pacific, Beijing, China) with CDCl3 or DMSO-d6 (dimethyl sulfoxide-d6) as solvents and tetramethylsilane (TMS) as an internal standard. Chemical shifts were reported in units (ppm) by assigning TMS resonance in the 1H spectrum as 0.00 ppm and CDCl3 resonance in the 13C spectrum as 77.0 ppm. All coupling constants (J values) were reported in Hertz (Hz). Chemical shifts of common trace 1H-NMR impurities (ppm): H2O: 1.56, CHCl3: 7.26. All new compounds were further characterized by HRMS (high resolution mass spectroscopy), using a Q-Exactive apparatus (ThermoFisher, Shanghai, China). Column chromatography was performed on 300–400 mesh silica gel. The CAS numbers of the known compounds are listed under the corresponding entry. The spectroscopic data of the known compounds matched the data reported in the corresponding references.

3.2. Screening Method for the Optimization of Friedel-Crafts Alkylation of Indoles with Celestrol

3.2.1. HPLC Parameters

Mobile phase: acetonitrile: H2O (0.2% H3PO4) = 75:25. Column: 4.6 mm × 250 mm BDS Hypersil C18 Column (5 µm particle size) (Thermo Scientific, Shanghai, China). Instrument: LC-20AT (Shimadzu Corporation, Kyoto, Japan). Detector: SPD-20A (Shimadzu Corporation). The retention time of 3a is 10.7 min.

3.2.2. Establishment of the Standard Curve

Preparation for the standard solution: 50 mg of product 3a was dissolved with acetonitrile in a 25 mL volumetric flask, obtaining a solution of concentration for 2.0 mg/mL. This method was repeated to get the other solutions of different concentrations, 1.0 mg/mL, 0.5 mg/mL, 0.25 mg/mL, 0.125 mg/mL. The results are shown in Table S1 and Figures S2–S7.

3.2.3. General Procedure for the Screening Method

Celastrol (0.045 mmol, 20 mg), indole (0.045–0.090 mmol) was dissolved by 1 mL solvent in a 10 mL closed tube. After intensive stirring at room temperature, the solution was added with metal catalyst (1–10 mmol %) and the reaction was kept for 3 h. Without any postprocessing, the mixture was diluted with acetonitrile in a 25 mL volumetric flask. The yield of product was immediately determined by HPLC (see Scheme 5). HPLC spectra can be found in Figures S8–S31.

3.3. General Procedure for the Friedel-Crafts Alkylation

Celastrol (2a, 0.222 mmol, 100 mg) and indole (3a, 0.266 mmol, 31 mg) were dissolved in dichloromethane (DCM, 2 mL) in a 10 mL closed tube. After intensive stirring at room temperature, the metal catalyst AlCl3·6H2O (5 mol %, 2.7 mg) was added to the solution and the reaction mixture was stirred for 3 h. When the reaction was finished, pure water (20 mL) was added to stop the reaction and subsequently the aqueous phase was separated and extracted with ethyl acetate (20 mL) three times. The organic layers were combined and dried with anhydrous sodium sulfate. The solvent was removed in vacuo, giving a crude mixture which was purified by flash chromatography on silica column (hexane/ethyl acetate/AcOH = 4:1:0.005) to give the pure products 3a3q, 1a2b, 1a2c. NMR spectra for all compounds can be found in Supplementary Materials.

3.4. Physical, Analytical, and Spectral Data of Synthesized Compounds

(2R,4aS,6aS,12bR,14aS,14bR)-10,11-Dihydroxy-8-(1H-indol-3-yl)-2,4a,6a,9,12b,14a-hexamethyl-1,2,3,4,4a,5,6,6a,8,12b,13,14,14a,14b-tetradecahydropicene-2-carboxylic acid (3a): CAS: 2022987-39-7. Starting from 100 mg of celastrol (2a), compound 3a (122.2 mg, 97%) was obtained as a wine-red solid according to the abovementioned procedure. 1H-NMR (CDCl3) δ 0.73 (br. s., 3H), 0.87–0.90 (m, 1H), 0.95–1.00 (m, 3H), 1.01 (br. s., 3H), 1.14 (br. s., 3H), 1.19 (t, J = 7.06 Hz, 1H), 1.25–1.27 (m, 1H), 1.34 (br. s., 3H), 1.42–1.57 (m, 4H), 1.57–1.76 (m, 4H), 1.90 (s, 3H), 1.99–2.07 (m, 2H), 2.10–2.17 (m, 1H), 2.40 (d, J = 15.04 Hz, 1H), 4.90 (d, J = 5.69 Hz, 1H), 6.21 (d, J = 6.24 Hz, 1H), 6.23 (br. s., 1H), 6.79 (br. s., 1H), 7.11 (t, J = 7.43 Hz, 1H), 7.16 (t, J = 7.43 Hz, 1H), 7.28 (d, J = 7.89 Hz, 1H), 7.75 (d, J = 7.70 Hz, 1H), 7.88 (br. s., 1H). 13C-NMR (CDCl3) δ 11.53, 18.84, 21.93, 28.89, 29.63, 29.75, 30.40, 30.54, 30.72, 31.55, 32.84, 34.62, 35.50, 36.74, 36.94, 37.76, 40.35, 43.62, 44.28, 108.93, 111.30, 119.09, 119.28, 120.23, 121.55, 121.58, 121.67, 127.10, 127.84, 136.49, 139.92, 142.17, 142.83, 147.48, 184.30. HRMS (ESI) calcd for C37H44NO4 [M]: 566.2376; found: 566.2376.
(2R,4aS,6aS,12bR,14aS,14bR)-10,11-Dihydroxy-2,4a,6a,9,12b,14a-hexamethyl-8-(1-methyl-1H-indol-3-yl)-1,2,3,4,4a,5,6,6a,8,12b,13,14,14a,14b-tetradecahydropicene-2-carboxylic acid (3b): Starting from 100 mg of celastrol (2a), compound 3b (106.1 mg, 82%) was obtained as a purple solid according to the above-mentioned procedure. 1H-NMR (DMSO-d6) δ 0.72 (s, 3H), 0.82–0.87 (m, 1H), 0.95 (s, 3H), 1.00 (s, 3H), 1.10 (s, 3H), 1.20–1.36 (m, 3H), 1.36 (s, 3H), 1.44 (d, J = 8.07 Hz, 1H), 1.50–1.76 (m, 6 H), 1.80 (s, 3H), 1.98–2.09 (m, 3H), 2.34 (d, J = 15.41 Hz, 1H), 3.58 (s, 3H), 4.84 (d, J = 6.05 Hz, 1H), 6.11 (d, J = 6.42 Hz, 1H), 6.31 (s, 1H), 6.75 (s, 1H), 6.98 (t, J = 7.52 Hz, 1H), 7.10 (t, J = 7.70 Hz, 1H), 7.30 (d, J = 8.25 Hz, 1H), 7.62 (d, J = 7.89 Hz, 1H), 7.86 (br. s., 1H), 8.97 (br. s., 1H), 12.11 (br. s., 1H). 13C-NMR (DMSO-d6) δ 11.97, 18.48, 22.30, 29.15, 29.93, 30.41, 30.53, 30.60, 31.46, 31.83, 32.61, 32.91, 34.95, 35.23, 35.56, 35.88, 36.79, 36.88, 37.80, 40.45, 43.55, 44.33, 108.85, 110.04, 118.63, 118.75, 119.43, 121.21, 121.33, 122.56, 126.05, 126.31, 127.38, 137.09, 140.89, 141.46, 144.08, 146.97, 179.99. HRMS (ESI) calcd for C38H46NO4 [M]: 580.3432; found: 580.3418.
(2R,4aS,6aS,12bR,14aS,14bR)-10,11-Dihydroxy-2,4a,6a,9,12b,14a-hexamethyl-8-(5-methyl-1H-indol-3-yl)-1,2,3,4,4a,5,6,6a,8,12b,13,14,14a,14b-tetradecahydropicene-2-carboxylic acid (3c): CAS: 2022987-43-3. Starting from 100 mg of celastrol (2a), compound 3c (127.5 mg, 99%) was obtained as a wine-red solid according to the abovementioned procedure. 1H-NMR (DMSO-d6) δ 0.72 (s, 3H), 0.84–0.88 (m, 1H), 0.98 (s, 3H), 1.02 (s, 3H), 1.11 (s, 3H), 1.26–1.32 (m, 2H), 1.37 (s, 3H), 1.45 (d, J = 8.1 Hz, 1H), 1.51–1.62 (m, 4H), 1.63–1.75 (m, 3H), 1.78 (s, 3H), 2.00–2.08 (m, 3H), 2.34 (d, J = 15.6 Hz, 1H), 2.39 (s, 3H), 4.79 (d, J = 6.1 Hz, 1H), 6.10 (d, J = 6.2 Hz, 1H), 6.23 (s, 1H), 6.73 (s, 1H), 6.88 (d, J = 8.3 Hz, 1H), 7.19 (d, J = 8.3 Hz, 1H), 7.45 (s, 1H), 7.85 (br. s., 1H), 8.94 (br. s., 1H), 10.45 (s, 1H), 12.08 (br. s., 1H). 13C-NMR (DMSO-d6) δ 11.89, 18.46, 21.88, 22.28, 29.15, 29.92, 30.39, 30.50, 30.61, 31.44, 31.83, 32.92, 34.93, 35.25, 35.56, 35.78, 36.74, 36.90, 37.80, 39.91, 43.54, 44.32, 108.75, 111.65, 118.66, 118.81, 121.13, 121.96, 122.53, 122.84, 126.38, 127.01, 127.33, 135.05, 140.78, 141.43, 144.00, 146.73, 180.04. HRMS (ESI) calcd. for C38H46NO4 [M]: 580.3432; found: 580.3417.
(2R,4aS,6aS,12bR,14aS,14bR)-10,11-Dihydroxy-2,4a,6a,9,12b,14a-hexamethyl-8-(6-methyl-1H-indol-3-yl)-1,2,3,4,4a,5,6,6a,8,12b,13,14,14a,14b-tetradecahydropicene-2-carboxylic acid (3d): CAS: 2022987-46-6. Starting from 100 mg of celastrol (2a), compound 3d (128 mg, 99%) was obtained as a wine-red solid according to the abovementioned procedure. 1H-NMR (DMSO-d6) δ 0.71 (s, 3H), 0.83–0.87 (m, 1H), 0.95 (s, 3H), 1.00 (s, 3H), 1.10 (s, 3H), 1.21–1.29 (m, 2H), 1.32 (s, 3H), 1.34–1.39 (m, 2H), 1.44 (d, J = 8.1 Hz, 1H), 1.49–1.61 (m, 3H), 1.62–1.74 (m, 2H), 1.79 (s, 3H), 1.96–2.07 (m, 3H), 2.33 (d, J = 15.4 Hz, 1H), 2.36 (s, 3H), 4.78 (d, J = 6.1 Hz, 1H), 6.12 (d, J = 6.4 Hz, 1H), 6.21 (s, 1H), 6.72 (s, 1H), 6.78 (d, J = 8.1 Hz, 1H), 7.08 (s, 1H), 7.46 (d, J = 8.1 Hz, 1H), 7.84 (s, 1H), 8.94 (br. s., 1H), 10.41 (s, 1H), 12.06 (br. s., 1H). 13C-NMR (DMSO-d6) δ 11.87, 18.48, 21.83, 22.31, 29.13, 29.92, 30.38, 30.50, 30.60, 31.82, 32.89, 34.93, 35.34, 35.51, 35.69, 36.76, 36.89, 37.77, 43.54, 44.31, 108.77, 111.73, 118.98, 119.03, 120.43, 121.19, 122.70, 125.03, 126.33, 130.15, 137.15, 140.83, 141.37, 143.96, 146.81, 180.00. HRMS (ESI) calcd. for C38H46NO4 [M]: 580.3432; found: 580.3419.
(2R,4aS,6aS,12bR,14aS,14bR)-10,11-Dihydroxy-2,4a,6a,9,12b,14a-hexamethyl-8-(7-methyl-1H-indol-3-yl)-1,2,3,4,4a,5,6,6a,8,12b,13,14,14a,14b-tetradecahydropicene-2-carboxylic acid (3e): CAS: 2022987-40-0. Starting from 100 mg of celastrol (2a), compound 3e (128 mg, 99%) was obtained as a purple solid according to the abovementioned procedure. 1H-NMR (DMSO-d6) δ 0.71 (s, 3H), 0.83–0.86 (m, 1H), 0.95 (s, 3H), 1.00 (s, 3H), 1.10 (s, 3H), 1.22–1.29 (m, 2H), 1.33 (s, 3H), 1.34–1.39 (m, 2H), 1.44 (d, J = 7.9 Hz, 1H), 1.49–1.60 (m, 3H), 1.62–1.74 (m, 2H), 1.79 (s, 3H), 1.96–2.07 (m, 3H), 2.33 (d, J = 15.4 Hz, 1H), 2.40 (s, 3H), 4.81 (d, J = 6.1 Hz, 1H), 6.13 (d, J = 6.6 Hz, 1H), 6.26 (s, 1H), 6.73 (s, 1H), 6.84 (d, J = 7.2 Hz, 1H), 6.88 (t, J = 7.4 Hz, 1H), 7.45 (d, J = 7.9 Hz, 1H), 7.86 (br. s., 1H), 8.96 (br. s., 1H), 10.56 (s, 1H), 12.08 (br. s., 1H). 13C-NMR (DMSO-d6) δ 11.89, 17.20, 18.47, 22.32, 29.13, 29.91, 30.38, 30.49, 30.60, 31.44, 31.82, 32.89, 34.92, 35.39, 35.52, 35.69, 36.76, 36.87, 37.77, 43.54, 44.30, 108.78, 116.91, 118.92, 119.70, 120.91, 121.18, 121.61, 121.77, 122.62, 126.26, 126.72, 136.20, 140.87, 141.40, 143.98, 146.89, 180.00. HRMS (ESI) calcd. for C38H46NO4 [M]: 580.3432; found: 580.3420.
(2R,4aS,6aS,12bR,14aS,14bR)-10,11-Dihydroxy-8-(4-hydroxy-1H-indol-3-yl)-2,4a,6a,9,12b,14a-hexa-methyl-1,2,3,4,4a,5,6,6a,8,12b,13,14,14a,14b-tetradecahydropicene-2-carboxylic acid (3f): Starting from 100 mg of celastrol (2a), compound 3f (86.8 mg, 67%) was obtained as a black brown solid according to the abovementioned procedure. 1H-NMR (DMSO-d6) δ 0.70 (s, 3H), 0.82–0.85 (m, 1H), 0.98 (s, 3H), 1.01 (s, 3H), 1.10 (s, 3H), 1.22–1.37 (m, 4H), 1.38 (s, 3H), 1.45 (d, J = 7.7 Hz, 1H), 1.48–1.61 (m, 3H), 1.64 (d, J = 12.8 Hz, 1H), 1.68–1.78 (m, 2H), 1.81 (s, 3H), 2.01–2.08 (m, 2H), 2.33 (d, J = 15.4 Hz, 1H), 5.05 (d, J = 5.9 Hz, 1H), 5.95 (s, 1H), 6.31 (d, J = 6.1 Hz, 1H), 6.34 (d, J = 7.5 Hz, 1H), 6.70 (s, 1H), 6.73 (d, J = 7.9 Hz, 1H), 6.80 (t, J = 7.7 Hz, 1H), 7.79 (s, 1H), 8.88 (s, 1H), 9.41 (s, 1H), 10.36 (s, 1H), 12.09 (br. s., 1H). 13C-NMR (DMSO-d6) δ 11.69, 14.11, 17.96, 21.86, 28.79, 29.49, 30.04, 30.06, 30.18, 31.41, 32.47, 34.53, 35.17, 35.30, 35.53, 36.26, 36.47, 37.37, 43.02, 43.91, 102.81, 103.05, 108.22, 116.34, 119.35, 119.42, 120.63, 121.59, 124.01, 126.61, 138.53, 140.54, 140.96, 143.46, 145.06, 151.80, 179.57. HRMS (ESI) calcd. for C37H44NO5 [M]: 582.3225; found: 582.3219.
(2R,4aS,6aS,12bR,14aS,14bR)-10,11-Dihydroxy-8-(7-methoxy-1H-indol-3-yl)-2,4a,6a,9,12b,14a-hexa-methyl-1,2,3,4,4a,5,6,6a,8,12b,13,14,14a,14b-tetradecahydropicene-2-carboxylic acid (3h): Starting from 100 mg of celastrol (2a), compound 3h (124.9 mg, 94%) was obtained as a purplish grey solid according to the abovementioned procedure using ethyl acetate as solvent. 1H-NMR (DMSO-d6) δ 0.71 (s, 3H), 0.86 (d, J = 9.9 Hz, 1H), 0.96 (s, 3H), 1.01 (s, 3H), 1.10 (s, 3H), 1.22–1.29 (m, 2H), 1.32 (s, 3H), 1.34–1.40 (m, 2H), 1.45 (d, J = 8.1 Hz, 1H), 1.50–1.61 (m, 3H), 1.62–1.75 (m, 2H), 1.79 (s, 3H), 1.96–2.08 (m, 3H), 2.34 (d, J = 15.4 Hz, 1H), 3.88 (s, 3H), 4.79 (d, J = 5.9 Hz, 1H), 6.12 (d, J = 6.2 Hz, 1H), 6.18 (s, 1H), 6.62 (d, J = 7.7 Hz, 1H), 6.73 (s, 1H), 6.90 (t, J = 7.9 Hz, 1H), 7.22 (d, J = 7.9 Hz, 1H), 7.88 (br. s., 1H), 8.99 (br. s., 1H), 10.69 (s, 1H), 12.04 (br. s., 1H). 13C-NMR (DMSO-d6) δ 11.9, 18.5, 22.3, 29.1, 29.9, 30.4, 30.5, 30.6, 31.8, 32.9, 34.9, 35.4, 35.5, 35.6, 36.8, 36.9, 37.8, 43.5, 44.3, 55.4, 101.8, 108.8, 112.2, 119.2, 119.8, 121.1, 121.6, 122.6, 126.3, 126.7, 128.5, 140.8, 141.4, 144.0, 146.6, 147.0, 180.0. HRMS (ESI) calcd. for C38H46NO5 [M]: 596.3381; found: 596.3372.
(2R,4aS,6aS,12bR,14aS,14bR)-10,11-Dihydroxy-8-(4-methoxy-1H-indol-3-yl)-2,4a,6a,9,12b,14a-hexa-methyl-1,2,3,4,4a,5,6,6a,8,12b,13,14,14a,14b-tetradecahydropicene-2-carboxylic acid (3i): Starting from 100 mg of celastrol (2a), compound 3i (128.4 mg, 97%) was obtained as a purplish grey solid according to the abovementioned procedure. 1H-NMR (DMSO-d6) δ 0.71 (s, 3H), 0.82–0.89 (m, 1H), 0.97 (s, 3H), 1.01 (s, 3H), 1.11 (s, 3H), 1.22–1.32 (m, 3H), 1.38 (s, 3H), 1.42–1.48 (m, 1H), 1.50–1.61 (m, 3H), 1.61–1.76 (m, 3H), 1.79 (s, 3H), 1.92–2.12 (m, 3H), 2.33 (d, J = 14.9 Hz, 1H), 3.94 (s, 3H), 5.01 (d, J = 14.9 Hz, 1H), 6.00 (s, 1H), 6.15–6.29 (m, 1H), 6.49 (d, J = 7.3 Hz, 1H), 6.71 (s, 1H), 6.84–7.07 (m, 2H), 7.82 (s, 1H), 8.93 (s, 1H), 10.54 (s, 1H), 12.11 (br. s., 1H). 13C-NMR (DMSO-d6) δ 11.68, 18.04, 21.89, 28.49, 29.50, 30.02, 30.08, 30.21, 31.41, 32.48, 34.49, 35.18, 35.30, 35.70, 36.29, 36.56, 37.40, 40.46, 43.02, 43.92, 55.29, 98.98, 105.04, 108.26, 116.65, 119.27, 120.04, 120.58, 121.60, 123.56, 126.52, 137.88, 140.56, 141.00, 143.51, 145.54, 154.25, 179.61. HRMS (ESI) calcd. for C38H46NO5 [M]: 596.3381; found: 596.3372.
(2R,4aS,6aS,12bR,14aS,14bR)-10,11-Dihydroxy-8-(5-hydroxy-1H-indol-3-yl)-2,4a,6a,9,12b,14a-hexa-methyl-1,2,3,4,4a,5,6,6a,8,12b,13,14,14a,14b-tetradecahydropicene-2-carboxylic acid (3j): Starting from 100 mg of celastrol (2a), compound 3j (116.6 mg, 90%) was obtained as a purple solid according to the abovementioned procedure. 1H-NMR (DMSO-d6) δ 0.75 (s, 3H), 0.84–0.90 (m, 1H), 1.01 (s, 3H), 1.03 (s, 3H), 1.13 (s, 3H), 1.20–1.34 (m, 2H), 1.38 (s, 3H), 1.41 (m, 2H), 1.48 (d, J = 7.7 Hz, 1H), 1.53–1.64 (m, 3H), 1.66–1.79 (m, 2H), 1.84 (s, 3H), 2.00–2.13 (m, 3H), 2.37 (d, J = 15.2 Hz, 1H), 4.74 (d, J = 5.9 Hz, 1H), 6.13 (d, J = 6.4 Hz, 1H), 6.22 (s, 1H), 6.63 (dd, J = 8.5, 2.1 Hz, 1H), 7.00 (s, 1H), 7.12 (d, J = 8.6 Hz, 1H), 7.84 (s, 1H), 8.62 (s, 1H), 8.94 (br. s., 1H), 10.27 (s, 1H), 12.10 (br. s., 1H). 13C-NMR (DMSO-d6) δ 11.90, 18.51, 22.35, 29.18, 29.95, 30.43, 30.56, 30.62, 31.84, 32.92, 34.97, 35.42, 35.55, 35.77, 36.76, 36.93, 37.80, 39.91, 43.57, 44.35, 103.23, 108.78, 111.57, 112.23, 118.31, 121.18, 122.39, 122.42, 126.41, 127.77, 131.36, 140.87, 141.40, 143.94, 146.85, 150.54, 180.03. HRMS (ESI) calcd. for C37H44NO5 [M]: 582.3225; found: 582.3212.
(2R,4aS,6aS,12bR,14aS,14bR)-10,11-Dihydroxy-8-(5-methoxy-1H-indol-3-yl)-2,4a,6a,9,12b,14a-hexa-methyl-1,2,3,4,4a,5,6,6a,8,12b,13,14,14a,14b-tetradecahydropicene-2-carboxylic acid (3k): CAS: 2022987-44-4. Starting from 100 mg of celastrol (2a), compound 3k (126 mg, 95%) was obtained as a wine-red solid according to the abovementioned procedure. 1H-NMR (DMSO-d6) δ 0.72 (s, 3H), 0.84–0.89 (m, 1H), 0.98 (s, 3H), 1.02 (s, 3H), 1.11 (s, 3H), 1.24–1.32 (m, 2H), 1.34 (s, 3H), 1.36–1.42 (m, 2H), 1.46 (d, J = 8.1 Hz, 1H), 1.51–1.63 (m, 3H), 1.66 (d, J = 11.9 Hz, 1H), 1.69–1.78 (m, 1H), 1.80 (s, 3H), 1.97–2.08 (m, 3H), 2.34 (d, J = 15.4 Hz, 1H), 6.13 (d, J = 6.4 Hz, 1H), 6.35 (d, J = 2.2 Hz, 1H), 6.69 (dd, J = 8.6, 2.4 Hz, 1H), 6.74 (s, 1H), 6.99 (d, J = 2.2 Hz, 1H), 7.19 (d, J = 8.6 Hz, 1H), 7.85 (br. s., 1H), 8.94 (br. s., 1H), 10.45 (s, 1H), 12.10 (br. s., 1H). 13C-NMR (DMSO-d6) δ 11.47, 18.03, 21.87, 28.68, 29.48, 29.97, 30.06, 30.18, 31.39, 32.47, 34.49, 34.82, 35.13, 35.34, 36.32, 36.49, 37.37, 39.47, 43.13, 43.89, 55.32, 100.92, 108.35, 110.62, 112.01, 118.35, 120.80, 122.29, 122.40, 125.90, 126.81, 131.42, 140.39, 140.95, 143.59, 146.24, 152.77, 179.57. HRMS (ESI) calcd. for C38H46NO5 [M]: 596.3381; found: 596.3370.
(2R,4aS,6aS,12bR,14aS,14bR)-8-(5-Chloro-1H-indol-3-yl)-10,11-Dihydroxy-2,4a,6a,9,12b,14a-hexamethyl-1,2,3,4,4a,5,6,6a,8,12b,13,14,14a,14b-tetradecahydropicene-2-carboxylic acid (3l): Starting from 100 mg of celastrol (2a), compound 3l (125 mg, 94%) was obtained as a wine-red solid according to the above-mentioned procedure. 1H-NMR (DMSO-d6) δ 0.70 (s, 3H), 0.83–0.87 (m, 1H), 0.96 (s, 3H), 1.01 (s, 3H), 1.10 (s, 3H), 1.24–1.31 (m, 2H), 1.33 (s, 3H), 1.34–1.40 (m, 2H), 1.44 (d, J = 7.9 Hz, 1H), 1.50–1.60 (m, 3H), 1.62–1.74 (m, 2H), 1.77 (s, 3H), 1.98–2.08 (m, 3H), 2.33 (d, J = 15.4 Hz, 1H), 4.82 (d, J = 6.1 Hz, 1H), 6.06 (d, J = 6.4 Hz, 1H), 6.43 (s, 1H), 6.73 (s, 1H), 7.03 (dd, J = 8.5 and 1.9 Hz, 1H), 7.31 (d, J = 8.6 Hz, 1H), 7.60 (s, 1H), 7.87 (s, 1H), 8.96 (s, 1H), 10.83 (s, 1H), 12.09 (br. s., 1H). 13C-NMR (DMSO-d6) δ 11.89, 18.47, 22.28, 29.15, 29.91, 30.37, 30.49, 30.60, 31.43, 31.82, 32.89, 34.93, 35.02, 35.56, 35.76, 36.77, 36.87, 37.81, 39.89, 43.58, 44.31, 108.83, 113.45, 118.50, 119.22, 121.13, 122.49, 123.33, 123.93, 125.94, 128.02, 135.12, 140.79, 141.45, 144.11, 147.10, 180.00. HRMS (ESI) calcd. for C37H43ClNO4 [M]: 600.2886; found: 600.2871.
(2R,4aS,6aS,12bR,14aS,14bR)-8-(5-Bromo-1H-indol-3-yl)-10,11-Dihydroxy-2,4a,6a,9,12b,14a-hexamethyl-1,2,3,4,4a,5,6,6a,8,12b,13,14,14a,14b-tetradecahydropicene-2-carboxylic acid (3m): CAS: 2022987-45-5. Starting from 100 mg of celastrol (2a), compound 3m (132 mg, 92%) was obtained as a wine-red solid according to the abovementioned procedure. 1H-NMR (DMSO-d6) δ 0.70 (s, 3H), 0.83–0.87 (m, 1H), 0.96 (s, 3H), 1.01 (s, 3H), 1.10 (s, 3H), 1.23–1.31 (m, 2H), 1.33 (s, 3H), 1.35–1.39 (m, 2H), 1.44 (d, J = 8.1 Hz, 1H), 1.50–1.60 (m, 3H), 1.62–1.73 (m, 2H), 1.77 (s, 3H), 1.97–2.07 (m, 3H), 2.33 (d, J = 15.4 Hz, 1H), 4.82 (d, J = 6.1 Hz, 1H), 6.05 (d, J = 6.4 Hz, 1H), 6.41 (s, 1H), 6.73 (s, 1H), 7.14 (dd, J = 8.6 and 1.8 Hz, 1H), 7.27 (d, J = 8.6 Hz, 1H), 7.74 (s, 1H), 7.87 (s, 1H), 8.96 (s, 1H), 10.84 (s, 1H), 12.07 (br. s., 1H). 13C-NMR (DMSO-d6) δ 11.90, 18.46, 22.27, 29.16, 29.91, 30.38, 30.49, 30.60, 31.44, 31.83, 32.89, 34.92, 35.02, 35.58, 35.75, 36.77, 36.87, 37.81, 43.58, 44.31, 108.83, 111.36, 113.95, 119.16, 121.11, 121.52, 122.48, 123.65, 123.77, 125.94, 128.75, 135.33, 140.78, 141.46, 144.12, 147.10, 180.00. HRMS (ESI) calcd. for C37H43BrNO4 [M]: 644.2381; found: 644.2367.
(2R,4aS,6aS,12bR,14aS,14bR)-8-(5-Cyano-1H-indol-3-yl)-10,11-Dihydroxy-2,4a,6a,9,12b,14a-hexamethyl-1,2,3,4,4a,5,6,6a,8,12b,13,14,14a,14b-tetradecahydropicene-2-carboxylic acid (3n): Starting from 100 mg of celastrol (2a), compound 3n (26.9 mg, 20%) was obtained as a wine-red solid according to the above-mentioned procedure. 1H-NMR (DMSO-d6) δ 0.71 (s, 3H), 0.83–0.88 (m, 1H), 0.94 (s, 3H), 1.00 (s, 3H), 1.10 (s, 3H), 1.21–1.29 (m, 2H), 1.32 (s, 3H), 1.34–1.40 (m, 2H), 1.44 (d, J = 8.1 Hz, 1H), 1.50–1.61 (m, 3H), 1.63–1.74 (m, 2H), 1.78 (s, 3H), 2.01–2.09 (m, 3H), 2.33 (d, J = 15.4 Hz, 1H), 4.90 (d, J = 6.1 Hz, 1H), 6.11 (d, J = 6.4 Hz, 1H), 6.56 (s, 1H), 6.75 (s, 1H), 7.38 (dd, J = 8.4 and 1.3 Hz, 1H), 7.47 (d, J = 8.4 Hz, 1H), 7.91 (br. s., 1H), 8.12 (s, 1H), 9.01 (br. s., 1H), 11.24 (s, 1H), 12.08 (br. s., 1H). 13C-NMR (DMSO-d6) δ 11.89, 18.49, 22.26, 29.12, 29.91, 30.35, 30.49, 30.60, 31.43, 31.81, 32.88, 34.91, 35.56, 35.75, 36.79, 36.87, 37.80, 39.89, 43.62, 44.30, 100.70, 108.91, 113.25, 120.64, 121.08, 121.51, 122.42, 123.94, 124.71, 125.18, 125.63, 126.71, 138.36, 140.85, 141.53, 144.23, 147.51, 180.00. HRMS (ESI) calcd for C38H43N2O4 [M]: 591.3228; found: 591.3220.
(2R,4aS,6aS,12bR,14aS,14bR)-8-(6-Fluoro-1H-indol-3-yl)-10,11-Dihydroxy-2,4a,6a,9,12b,14a-hexamethyl-1,2,3,4,4a,5,6,6a,8,12b,13,14,14a,14b-tetradecahydropicene-2-carboxylic acid (3o): CAS: 2022987-47-7. Starting from 100 mg of celastrol (2a), compound 3o (123.2 mg, 95%) was obtained as a wine-red solid according to the abovementioned procedure. 1H-NMR (DMSO-d6) δ 0.71 (s, 3H), 0.84–0.87 (m, 1H), 0.97 (s, 3H), 1.01 (s, 3H), 1.11 (s, 3H), 1.22–1.30 (m, 2H), 1.33 (s, 3H), 1.35–1.41 (m, 2H), 1.45 (d, J = 8.1 Hz, 1H), 1.51–1.61 (m, 3H), 1.63–1.74 (m, 2H), 1.79 (s, 3H), 1.96–2.08 (m, 3H), 2.34 (d, J = 15.4 Hz, 1H), 4.80 (d, J = 6.1 Hz, 1H), 6.10 (d, J = 6.4 Hz, 1H), 6.45 (s, 1H), 6.74 (s, 1H), 6.88 (td, J = 9.1 and 2.5 Hz, 1H), 7.25–7.34 (m, 2H), 7.88 (br. s., 1H), 9.00 (br. s., 1H), 10.73 (s, 1H), 12.05 (br. s., 1H). 13C-NMR (DMSO-d6) δ 11.87, 18.47, 22.31, 29.12, 29.91, 30.36, 30.49, 30.60, 31.43, 31.81, 32.88, 34.93, 35.12, 35.53, 35.74, 36.76, 36.89, 37.79, 43.57, 44.31, 103.95 (d, J = 23.1 Hz), 108.84, 109.24 (d, J = 23.1 Hz), 112.77 (d, J = 9.9 Hz), 119.43 (d, J = 5.5 Hz), 121.17, 122.55, 124.22, 125.99, 127.04 (d, J = 9.9 Hz), 133.33, 140.84, 141.42, 144.07, 147.03, 156.96 (d, J = 231.1 Hz), 180.01. HRMS (ESI) calcd. for C37H43FNO4 [M]: 584.3182; found: 584.3169.
(2R,4aS,6aS,12bR,14aS,14bR)-8-(6-Chloro-1H-indol-3-yl)-10,11-Dihydroxy-2,4a,6a,9,12b,14a-hexamethyl-1,2,3,4,4a,5,6,6a,8,12b,13,14,14a,14b-tetradecahydropicene-2-carboxylic acid (3p): CAS: 2022987-48-8. Starting from 100 mg of celastrol (2a), compound 3p (129.2 mg, 97%) was obtained as a wine-red solid according to the abovementioned procedure. 1H-NMR (DMSO-d6) δ 0.70 (s, 3H), 0.85 (m, 1H), 0.94 (s, 3H), 1.00 (s, 3H), 1.09 (s, 3H), 1.21–1.28 (m, 2H), 1.30 (s, 3H), 1.32–1.39 (m, 2H), 1.43 (d, J = 8.1 Hz, 1H), 1.48–1.60 (m, 3H) 1.61–1.74 (m, 2H), 1.78 (s, 3H), 1.95–2.07 (m, 3H), 2.32 (d, J = 15.4 Hz, 1H), 4.81 (d, J = 5.9 Hz, 1H), 6.10 (d, J = 6.4 Hz, 1H), 6.36 (s, 1H), 6.72 (s, 1H), 6.96 (dd, J = 8.4, 1.8 Hz, 1H), 7.34 (d, J = 2.0 Hz, 1H), 7.58 (s, 1H), 7.88 (br. s., 1H), 8.99 (br. s., 1H), 10.75 (s, 1H), 12.05 (br. s., 1H). 1C-NMR (DMSO-d6) δ 11.86, 18.48, 22.31, 29.11, 29.90, 30.34, 30.49, 30.60, 31.43, 31.81, 32.88, 34.92, 35.11, 35.50, 35.69, 36.77, 36.87, 37.77, 43.58, 44.30, 108.85, 111.54, 118.95, 119.56, 120.66, 121.13, 122.44, 123.15, 125.75, 125.92, 125.99, 137.07, 140.84, 141.44, 144.08, 147.30, 180.01. HRMS (ESI) calcd. for C37H43ClNO4 [M]: 600.2886; found: 600.2879.
Ethyl (2R,4aS,6aS,12bR,14aS,14bR)-10,11-dihydroxy-8-(1H-indol-3-yl)-2,4a,6a,9,12b,14a-hexamethyl-1,2,3,4,4a,5,6,6a,8,12b,13,14,14a,14b-tetradecahydropicene-2-carboxylate (1a2b): Starting from 150 mg 2b, compound 1a2b (165.9 mg, 89%) was obtained as a wine-red solid. 1H-NMR (DMSO-d6) δ 0.58 (s, 3H), 0.83–0.88 (m, 1H), 0.97 (s, 3H), 1.02 (s, 3H), 1.11 (s, 3H), 1.13–1.15 (m, 2H), 1.15–1.17 (m, 1H) 1.17–1.19 (m, 1H), 1.29–1.35 (m, 1H), 1.36 (s, 3H), 1.37–1.41 (m, 1H), 1.46 (d, J = 7.9 Hz, 1H), 1.56 (td, J = 13.4 and 3.9 Hz, 2H), 1.60–1.66 (m, 2H), 1.72 (td, J = 14.0 and 5.9 Hz, 1H), 1.80 (s, 3H), 1.95–2.03 (m, 2H), 2.08 (d, J = 12.5 Hz, 2H), 2.36 (d, J = 15.6 Hz, 1H), 3.87–3.98 (m, 2H), 4.83 (d, J = 6.1 Hz, 1H), 6.13 (d, J = 6.4 Hz, 1H), 6.31 (s, 1H), 6.73 (s, 1H), 6.96 (t, J = 7.4 Hz, 1H), 7.05 (t, J = 7.5 Hz, 1H), 7.31 (d, J = 8.1 Hz, 1H), 7.61 (d, J = 8.1 Hz, 1H), 7.85 (s, 1H), 8.94 (s, 1H), 10.61 (s, 1H). 13C-NMR (DMSO-d6) δ 11.42, 14.10, 17.81, 20.77, 21.68, 28.68, 29.39, 30.01, 30.05, 30.17, 31.34, 32.44, 34.32, 34.81, 35.05, 35.30, 36.32, 36.36, 37.31, 43.07, 43.80, 59.83, 108.41, 111.50, 118.22, 118.74, 118.82, 120.72, 121.49, 122.31, 125.74, 126.58, 136.27, 140.33, 141.03, 143.59, 146.19, 177.43. HRMS (ESI) calcd. for C39H48NO4 [M]: 594.3589; found: 594.3578.
Methyl (2R,4aS,6aS,12bR,14aS,14bR)-10-(butanoyloxy)-11-hydroxy-8-(1H-indol-3-yl)-2,4a,6a,9,12b,14a-hexamethyl-1,2,3,4,4a,5,6,6a,8,12b,13,14,14a,14b-tetradecahydropicene-2-carboxylate (1a2c): Starting from 68.9 mg 2c, compound 1a2c (24.5 mg, 29%) was obtained as a pink solid according to the above-mentioned procedure. 1H-NMR (DMSO-d6) δ 0.55 (br. s., 3H), 0.89 (d, J = 11.74 Hz, 1H), 0.92–0.96 (m, 3H), 0.97 (br. s., 3H), 1.02 (br. s., 3H), 1.11 (br. s., 3H), 1.35 (br. s., 3H), 1.37–1.41 (m, 2H), 1.46 (d, J = 6.42 Hz, 1H), 1.49–1.60 (m, 4H), 1.63 (dd, J = 14.21, 7.06 Hz, 4H), 1.72 (br. s., 3H), 1.82 (dd, J = 15.96, 11.55 Hz, 1H), 1.98 (t, J = 12.29 Hz, 1H), 2.03–2.07 (m, 1H), 2.10 (br. s., 1H), 2.32 (d, J = 15.22 Hz, 1H), 2.53 (t, J = 7.20 Hz, 2H), 3.49 (br. s., 3H), 4.86 (d, J = 5.50 Hz, 1H), 6.18 (d, J = 5.69 Hz, 1H), 6.29 (br. s., 1H), 6.85 (br. s., 1H), 6.91–6.99 (m, 1H), 7.05 (t, J = 7.06 Hz, 1H), 7.30 (d, J = 7.70 Hz, 1H), 7.61 (d, J = 7.89 Hz, 1H), 9.25 (br. s., 1H), 10.65 (br. s., 1H). 13C-NMR (DMSO-d6) δ 11.77, 13.47,17.79, 18.05, 21.79, 28.65, 29.48, 30.00 , 30.15, 30.18, 31.34, 32.35, 34.37, 34.71, 34.89, 35.08, 35.13, 36.35, 36.75, 37.21, 39.85, 43.16, 43.80, 51.47, 109.84, 111.55, 118.25, 118.34, 118.85, 120.89, 121.42, 122.11, 125.80, 126.45, 127.44, 135.40, 136.32, 146.09, 147.30, 147.34, 171.09, 178.01.

4. Conclusions

In conclusion, an experimentally simple, highly efficient Michael-type Friedel-Crafts addition of indoles to the para-quinone methide of celastrol was developed for the synthesis of celastrol derivatives. A diverse set of indoles could react with celastrol to produce the desired products in moderate to good yields (20–99%) with only 5 mol % of AlCl3·6H2O as catalyst in 3 h of reaction time. This method could be used extensively for the synthesis of C6-indole substituted celastrols.

Supplementary Materials

Supplementary materials are available online.

Acknowledgments

This work was supported by the grants from the National Nature Science Fund of China (NSFC-81301888, NSF-81672749, NSFC-31271453, NSFC-31471318, NSFC-91429306, U1405229, and NSFC-91129302), the Fundamental Research Funds for the Central Universities (2013121038).

Author Contributions

Ying Su and Zhiping Zeng conceived and designed the experiments; Yi Zhu, Ziwen Chen, Zhenfei Huang, Siwei Yan and Zhuoer Li performed the experiments and analyzed the data; Xiaokun Zhang and Hu Zhou contributed reagents/materials/analysis tools; Ying Su, Xiaokun Zhang and Zhiping Zeng wrote the paper.

Conflicts of Interest

The authors declare no conflict of interest.

References

  1. Gunatilaka, A.A.L. Triterpenoid Quinonemethides and Related Compounds (Celastroloids). In Fortschritte der Chemie Organischer Naturstoffe/Progress in the Chemistry of Organic Natural Products; Herz, W., Kirby, G.W., Moore, R.E., Steglich, W., Tamm, C., Eds.; Springer: Vienna, Austria, 1996; pp. 1–123. [Google Scholar]
  2. Huang, C.Y.; Rokita, S.E. DNA alkylation promoted by an electron-rich quinone methide intermediate. Front. Chem. Sci. Eng. 2016, 10, 213–221. [Google Scholar] [CrossRef]
  3. Percivalle, C.; Doria, F.; Freccero, M. Quinone methides as DNA alkylating agents: An overview on efficient activation protocols for enhanced target selectivity. Curr. Org. Chem. 2014, 18, 19–43. [Google Scholar] [CrossRef]
  4. Rokita, S.E. Quinone Methides; John Wiley & Sons: Hoboken, NJ, USA, 2009; Volume 4. [Google Scholar]
  5. Duan, Y.K.; Jin, H.W.; Yu, H.; Wang, Z.L.; Zhang, L.R.; Huo, J.X. Computational investigation of interactions between Cdc37 and celastrol. Mol. Simul. 2013, 39, 270–278. [Google Scholar] [CrossRef]
  6. Han, S. Docking and molecular dynamics simulations of celastrol binding to p23. Bull. Korean Chem. Soc. 2012, 33, 322–324. [Google Scholar] [CrossRef]
  7. Salvador, J.A.R.; Santos, R.C.; Figueiredo, S.A.C.; Jing, Y.K. Antitumor effects of celastrol and semi-synthetic derivatives. Mini-Rev. Org. Chem. 2014, 11, 400–407. [Google Scholar] [CrossRef]
  8. Lee, J.H.; Koo, T.H.; Yoon, H.; Jung, H.S.; Jin, H.Z.; Lee, K.; Hong, Y.S.; Lee, J.J. Inhibition of NF-κB activation through targeting I κB kinase by celastrol, a quinone methide triterpenoid. Biochem. Pharmacol. 2006, 72, 1311–1321. [Google Scholar] [CrossRef] [PubMed]
  9. Zhang, T.; Li, Y.Y.; Yu, Y.K.; Zou, P.; Jiang, Y.Q.; Sun, D.X. Characterization of celastrol to inhibit Hsp90 and Cdc37 interaction. J. Biol. Chem. 2009, 284, 35381–35389. [Google Scholar] [CrossRef] [PubMed]
  10. Kannaiyan, R.; Manu, K.A.; Chen, L.X.; Li, F.; Rajendran, P.; Subramaniam, A.; Lam, P.; Kumar, A.P.; Sethi, G. Celastrol inhibits tumor cell proliferation and promotes apoptosis through the activation of c-jun N-terminal kinase and suppression of PI3K/Akt signaling pathways. Apoptosis 2011, 16, 1028–1041. [Google Scholar] [CrossRef] [PubMed]
  11. Liu, J.L.; Lee, J.; Hernandez, M.A.S.; Mazitschek, R.; Ozcan, U. Treatment of obesity with celastrol. Cell 2015, 161, 999–1011. [Google Scholar] [CrossRef] [PubMed]
  12. Allison, A.C.; Cacabelos, R.; Lombardi, V.R.M.; Alvarez, X.A.; Vigo, C. Celastrol, a potent antioxidant and anti-inflammatory drug, as a possible treatment for Alzheimer’s disease. Prog. Neuro-Psychopharmacol. Biol. Psychiatry 2001, 25, 1341–1357. [Google Scholar] [CrossRef]
  13. Paris, D.; Ganey, N.J.; Laporte, V.; Patel, N.S.; Beaulieu-Abdelahad, D.; Bachmeier, C.; March, A.; Ait-Ghezala, G.; Mullan, M.J. Reduction of β-amyloid pathology by celastrol in a transgenic mouse model of alzheimer’s disease. J. Neuroinflamm. 2010, 7, 15. [Google Scholar] [CrossRef] [PubMed]
  14. Wang, S.F.; Liu, K.C.; Wang, X.M.; He, Q.X.; Chen, X.Q. Toxic effects of celastrol on embryonic development of zebrafish (Danio rerio). Drug Chem. Toxicol. 2011, 34, 61–65. [Google Scholar] [CrossRef] [PubMed]
  15. Wang, S.; Liu, K.-C.; Wang, X.; He, Q.-X.; Han, L.-W.; Hou, H.-R. Preliminary study on cardiotoxicity of celastrol to zebrafish embryo. Chin. Pharmacol. Bull. 2009, 24, 634–636. [Google Scholar]
  16. Qi, X.L.; Qin, J.Y.; Ma, N.; Chou, X.H.; Wu, Z.H. Solid self-microemulsifying dispersible tablets of celastrol: Formulation development, charaterization and bioavailability evaluation. Int. J. Pharm. 2014, 472, 40–47. [Google Scholar] [CrossRef] [PubMed]
  17. Song, J.; Shi, F.; Zhang, Z.H.; Zhu, F.X.; Xue, J.; Tan, X.B.; Zhang, L.Y.; Jia, X.B. Formulation and evaluation of celastrol-loaded liposomes. Molecules 2011, 16, 7880–7892. [Google Scholar] [CrossRef] [PubMed]
  18. Abbas, S.; Bhoumik, A.; Dahl, R.; Vasile, S.; Krajewski, S.; Cosford, N.D.P.; Ronai, Z.E.A. Preclinical studies of celastrol and acetyl isogambogic acid in melanoma. Clin. Cancer Res. 2007, 13, 6769–6778. [Google Scholar] [CrossRef] [PubMed]
  19. Sun, H.L.; Xu, L.P.; Yu, P.; Jiang, J.; Zhang, G.X.; Wang, Y.Q. Synthesis and preliminary evaluation of neuroprotection of celastrol analogues in pc12 cells. Bioorg. Med. Chem. Lett. 2010, 20, 3844–3847. [Google Scholar] [CrossRef] [PubMed]
  20. Klaic, L.; Morimoto, R.I.; Silverman, R.B. Celastrol analogues as inducers of the heat shock response. Design and synthesis of affinity probes for the identification of protein targets. ACS Chem. Biol. 2012, 7, 928–937. [Google Scholar] [CrossRef] [PubMed]
  21. Tang, K.Y.; Huang, Q.Q.; Zeng, J.F.; Wu, G.M.; Huang, J.W.; Pan, J.F.; Lu, W. Design, synthesis and biological evaluation of C(6)-modified celastrol derivatives as potential antitumor agents. Molecules 2014, 19, 10177–10188. [Google Scholar] [CrossRef] [PubMed]
  22. Wei, W.; Wu, S.; Wang, X.L.; Sun, C.K.W.; Yang, X.Y.; Yan, X.R.; Chua, M.S.; So, S. Novel celastrol derivatives inhibit the growth of hepatocellular carcinoma patient-derived xenografts. Oncotarget 2014, 5, 5819–5831. [Google Scholar] [CrossRef] [PubMed]
  23. Tang, K.Y.; Huang, J.W.; Pan, J.F.; Zhang, X.; Lu, W. Design, synthesis and biological evaluation of C(6)-indole celastrol derivatives as potential antitumor agents. RSC Adv. 2015, 5, 19620–19623. [Google Scholar] [CrossRef]
  24. Tang, W.J.; Wang, J.; Tong, X.; Shi, J.B.; Liu, X.H.; Li, J. Design and synthesis of celastrol derivatives as anticancer agents. Eur. J. Med. Chem. 2015, 95, 166–173. [Google Scholar] [CrossRef] [PubMed]
  25. Tsuchimoto, T.; Tobita, K.; Hiyama, T.; Fukuzawa, S.-I. Scandium(III) triflate-catalyzed Friedel−Crafts alkylation reactions. J. Org. Chem. 1997, 62, 6997–7005. [Google Scholar] [CrossRef]
  26. Shen, Y.Y.; Qi, J.F.; Mao, Z.J.; Cui, S.L. Fe-catalyzed hydroalkylation of olefins with para-quinone methides. Org. Lett. 2016, 18, 2722–2725. [Google Scholar] [CrossRef] [PubMed]
  27. He, F.S.; Jin, J.H.; Yang, Z.T.; Yu, X.X.; Fossey, J.S.; Deng, W.P. Direct asymmetric synthesis of β-bis-aryl-α-amino acid esters via enantioselective copper-catalyzed addition of p-quinone methides. ACS Catal. 2016, 6, 652–656. [Google Scholar] [CrossRef]
  28. Dong, N.; Zhang, Z.P.; Xue, X.S.; Li, X.; Cheng, J.P. Phosphoric acid catalyzed asymmetric 1,6-conjugate addition of thioacetic acid to para-quinone methides. Angew. Chem. Int. Ed. 2016, 55, 1460–1464. [Google Scholar] [CrossRef] [PubMed]
  29. Rueping, M.; Nachtsheim, B.J. A review of new developments in the Friedel-Crafts alkylation—From green chemistry to asymmetric catalysis. Beilstein J. Org. Chem. 2010, 6, 6. [Google Scholar] [CrossRef] [PubMed]
  30. Sebti, S.; Tahir, R.; Nazih, R.; Boulaajaj, S. Comparison of different Lewis acid supported on hydroxyapatite as new catalysts of Friedel-Crafts alkylation. Appl. Catal. A Gen. 2001, 218, 25–30. [Google Scholar] [CrossRef]
  31. Boucher, D.L.; Brown, M.A.; McGarvey, B.R.; Tuck, D.G. Spectroscopic and crystallographic studies of adducts of aluminium trichloride with cyclic ketones, para-quinones and ortho-quinones. J. Chem. Soc. Dalton 1999, 19, 3445–3449. [Google Scholar] [CrossRef]
  32. Wheland, G.W. A quantum mechanical investigation of the orientation of substituents in aromatic molecules. J. Am. Chem. Soc. 1942, 64, 900–908. [Google Scholar] [CrossRef]
Not available.
Scheme 1. Preparation of C6-indole-substituted celastrol derivatives.
Scheme 1. Preparation of C6-indole-substituted celastrol derivatives.
Molecules 22 00742 sch001
Scheme 2. Reaction scope and limitations using indoles as the substrates.
Scheme 2. Reaction scope and limitations using indoles as the substrates.
Molecules 22 00742 sch002
Scheme 3. Reaction scope using different celastrol derivatives as the substrates.
Scheme 3. Reaction scope using different celastrol derivatives as the substrates.
Molecules 22 00742 sch003
Scheme 4. The proposed mechanism for Friedel-Crafts Alkylation.
Scheme 4. The proposed mechanism for Friedel-Crafts Alkylation.
Molecules 22 00742 sch004
Scheme 5. Synthesis of compound 3a.
Scheme 5. Synthesis of compound 3a.
Molecules 22 00742 sch005
Table 1. The screening of metal catalysts for the Friedel-Crafts alkylation of indoles with celastrol a.
Table 1. The screening of metal catalysts for the Friedel-Crafts alkylation of indoles with celastrol a.
Molecules 22 00742 i001
EntryCatalyst (mol %)Solvent (1 mL)Indole 1a (equiv.)Time (h)Yield of 3a b (%)
1/DCM2122
2Pd[P(C6H5)3]4 (10)DCM21212
3Pd(OAc)2 (10)DCM21228
4FePO4·6H2O (10)DCM2129
5Al(OH)3 (10)DCM2120
6Al2(SO4)3·18H2O (10)DCM21212
7MgCl2·6H2O (10)DCM21264
8ZnCl2 (10)DCM21280
9FeCl3·6H2O (10)DCM21293
10AlCl3·6H2O (10)DCM21299
11AlCl3·6H2O (10)MeOH21295
12AlCl3·6H2O (10)THF21287
13AlCl3·6H2O (10)Dioxane21284
14AlCl3·6H2O (10)ACN21290
15AlCl3·6H2O (10)DMF21293
16AlCl3·6H2O (10)DCM2699
17AlCl3·6H2O (10)DCM2399
18AlCl3·6H2O (10)DCM21.568
19AlCl3·6H2O (10)DCM20.553
20AlCl3·6H2O (10)DCM1.53100
21AlCl3·6H2O (10)DCM1.2399 c
22AlCl3·6H2O (10)DCM1398
23AlCl3·6H2O (5)DCM1.2399 d
24AlCl3·6H2O (1)DCM1.2398 e
a Reaction conditions: 1a (1–2 equiv., 0.045–0.090 mmol), 2a (0.045 mmol, 20 mg), and metal catalyst (1–10 mol %) were dissolved in DCM (1 mL) at room temperature; b Yield was calculated by HPLC, see Materials and Methods; c Conditions: 1a (1.2 equiv.), 2a (50 mg), and AlCl3·6H2O (10 mol %) in DCM at room temperature for 3 h; d Conditions: 1a (1.2 equiv.), 2a (100 mg), and AlCl3·6H2O (5 mol %) in DCM at room temperature for 3 h; e Conditions: 1a (1.2 equiv.), 2a (250 mg), and AlCl3·6H2O (1 mol %) in DCM at room temperature for 3 h. Abbreviations: equiv = equivalent, DCM = methylene chloride, THF = tetrahydrofuran, ACN = acetonitrile, DMF = dimethylformamide, r.t. = room temperature.

Share and Cite

MDPI and ACS Style

Zhu, Y.; Chen, Z.; Huang, Z.; Yan, S.; Li, Z.; Zhou, H.; Zhang, X.; Su, Y.; Zeng, Z. AlCl3·6H2O-Catalyzed Friedel-Crafts Alkylation of Indoles by the para-Quinone Methide Moiety of Celastrol. Molecules 2017, 22, 742. https://doi.org/10.3390/molecules22050742

AMA Style

Zhu Y, Chen Z, Huang Z, Yan S, Li Z, Zhou H, Zhang X, Su Y, Zeng Z. AlCl3·6H2O-Catalyzed Friedel-Crafts Alkylation of Indoles by the para-Quinone Methide Moiety of Celastrol. Molecules. 2017; 22(5):742. https://doi.org/10.3390/molecules22050742

Chicago/Turabian Style

Zhu, Yi, Ziwen Chen, Zhenfei Huang, Siwei Yan, Zhuoer Li, Hu Zhou, Xiaokun Zhang, Ying Su, and Zhiping Zeng. 2017. "AlCl3·6H2O-Catalyzed Friedel-Crafts Alkylation of Indoles by the para-Quinone Methide Moiety of Celastrol" Molecules 22, no. 5: 742. https://doi.org/10.3390/molecules22050742

Article Metrics

Back to TopTop