Next Article in Journal
Effect of Calcium Sprays on Mechanical Strength and Cell Wall Fractions of Herbaceous Peony (Paeonia Lactiflora Pall.) Inflorescence Stems
Previous Article in Journal
Comparative Study of Essential Oils Extracted from Algerian Myrtus communis L. Leaves Using Microwaves and Hydrodistillation
 
 
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Article

Improved Synthesis of 5-Substituted 1H-Tetrazoles via the [3+2] Cycloaddition of Nitriles and Sodium Azide Catalyzed by Silica Sulfuric Acid

1
College of Science, Northwest A & F University, Yangling, Shaanxi 712100, China
2
Key Laboratory of Protection and Utilization of Biological Resources in Tarim Basin, Talimu University, Alaer, Xinjiang 843300, China
*
Author to whom correspondence should be addressed.
Int. J. Mol. Sci. 2012, 13(4), 4696-4703; https://doi.org/10.3390/ijms13044696
Submission received: 20 February 2012 / Revised: 19 March 2012 / Accepted: 30 March 2012 / Published: 12 April 2012
(This article belongs to the Section Green Chemistry)

Abstract

:
A silica supported sulfuric acid catalyzed [3+2] cycloaddition of nitriles and sodium azide to form 5-substituted 1H-tetrazoles is described. The protocol can provide a series of 5-substituted 1H-tetrazoles using silica sulfuric acid from nitriles and sodium azide in DMF in 72%–95% yield.

Graphical Abstract

1. Introduction

In recent years, the growth of the tetrazole chemistry has been significant [1,2], mainly as a result of the central roles played by tetrazoles in coordination chemistry as nitrogen-containing heterocyclic ligands [3], in materials applications as specialty explosives, information recording systems, rocket propellants and in agrichemical applications [4,5]. In particular, tetrazoles can be used as equivalent replacements for carboxylic moiety in drug design, with the advantage over carboxylic moieties being that they are resistant to many biological metabolic degradation pathways [6]. In fact, several leading compounds have been synthesized and tested for pharmaceutical purposes [79]. Furthermore, tetrazole moieties can be used as important synthons in synthetic organic chemistry due to their characteristic electronic property [1012].
The proton acid-catalyzed cycloaddition between hydrazoic acid and nitriles has long been one of the main routes to 5-substituted tetrazoles. However, this standard procedure suffers a dangerous potential explosion with large excess amounts of harmful hydrazoic acid [13]. Consequently, it is urgent to improve the synthetic method of obtaining 5-substituted 1H-tetrazoles. A number of catalytic systems of [3+2] reaction of sodium azide and nitriles were reported by various research teams, such as Zn(II) salts [1416], AlCl3 [17], Et3N·HCl [18], BF3·OEt2 [19], TBAF [20], Pd(PPh3)4 [21], Zn/Al hydrotalcite [22], ZnO [23], Zn-Cu alloy [24], Cu2O [25] and FeCl3-SiO2 [26]. The limitations of the existing protocols realized in terms of longer reaction time, stringent conditions, expensive and toxic metal catalysts (e.g., Pd(PPh3)4 is costly and air sensitive), tedious work-ups and unable or unsatisfactory recovery of catalyst. Therefore, it is necessary to develop a more efficient and convenient method that avoids these drawbacks and could be used both on a laboratory and industrial scale.
Meanwhile, recyclable and efficient heterogeneous catalysts have attracted vastly soaring interest in the context of appealing to green synthesis. As a case in point, silica sulfuric acid is cheapest and easiest to be implanted for industrial use [27,28]. Because of its unique chemical and physical properties, silica sulfuric acid has several advantages such as nonvolatility, adjustable acidity, ease of handling and environmentally safe disposal. The erosion of equipment will be dramatically reduced when it is used as a substituent of traditional protonic acid in industry [29]. We are interested in an efficient and convenient formation of 5-substituted 1H-tetrazoles through nitrile and sodium azide catalyzed by silica sulfuric acid. To the best of our knowledge, there is no report on any solid acid catalytic synthesis of 5-substituted 1H-tetrazoles from nitrile and sodium azide. Herein, we wish to report a facile synthesis of 5-substituted 1H-tetrazoles catalyzed by silica sulfuric acid in 72–95% yield.

2. Results and Discussion

To begin with, the silica sulfuric acid was prepared according to Shaterian’s method [28] and the amount of H+ in silica sulfuric acid was titrated and calculated (0.05 g of silica sulfuric acid equal to 0.1 mmol). The solvents were screened and the result was shown in Table 1. Our studies subsequently showed that the nature of reaction solvents was extremely important for this reaction. Obviously, alcohols (Table 1, entries 1–2) were not suitable for this reaction. Low polar solvents such as toluene (entry 4) and chloroform (entry 5) both give unsatisfactory yield. Both DMF (entry 5) and DMSO (entry 6) gave excellent yields, therefore, DMF was chosen as the most suitable solvent because of its easier workup compared with DMSO.
Subsequently, the effect of catalyst loading was investigated. To our interest, for the model reaction of benzonitriles and sodium azide, 100% mol catalyst is enough to perform cyclization. Lower catalyst loading (50%) would lead to longer reaction time and lower yield (Table 1, entry 7) and higher ratio catalyst (200%) only gave a slightly increase of yield (Table 1, entry 8). Finally, we set up the optimized reaction conditions that are DMF as solvent, 100% molar ratio silica sulfuric acid as catalyst, at refluxing temperature (Table 1, entry 5).
With the optimized reaction conditions, we next examined the scope of silica sulfuric acid catalyzed cyclization for the synthesis of 5-substituted 1H-tetrazoles. The results are summarized in Table 2. A wide range of structurally diverse nitriles (Table 2), including aromatic (Table 2, entries 1–2, 5–7, 10) and aliphatic nitriles (Table 2, entries 3, 8–9, 12) were subjected under this protocol to provide the corresponding 5-substituted 1H-tetrazoles in high yields. Neither the electronic nature nor the satiric hindrance of the substitution at the both aromatic rings had any obvious influence upon the reactivity. All the products in our reactions listed in Table 2 were easily characterized on the basis of physical and spectral data and also by comparison with authentic samples or reported ones. The structure of product of entry 10 was determined by X-ray crystallography and the ORTEP was shown in Figure 1 [30].
In addition, we investigated the reusability and recycling of silica sulfuric acid. As to the model reaction, the catalyst was separated by simple filtration after completion of reaction. The recovered silica sulfuric acid was reused directly three times without significant decrease in activity.

3. Experimental Section

The IR spectra were recorded on a Perkin-Elmer 2000 FTIR spectrometer. 1H and 13C NMR data were recorded in DMSO with Bruker-AM 500 unless noted otherwise. The chemical shifts were reported in ppm relative to TMS. Mass spectra were recorded on a Thermo Fisher mass spectrometer by electrospray ionization method (ESI). Column chromatography were generally performed on silica gel (200–300 mesh) eluting with petroleum ether:EtOAc (20:1–1:1 v/v) and TLC inspections on silica gel GF254 plates with petroleum ether:EtOAc (20:1–1:1 v/v) unless noted otherwise.
General procedure for the preparation of through nitriles and sodium azide catalyzed by silica sulfuric: A suspension of nitriles (1 mmol), sodium azide (1.2 mmol) and silica sulfuric acid (500 mg, 1 mmol) in DMF (10 mmol) was heated to reflux for 4–12 hours with stirring. After the completion of the reaction, the precipitate of solid acid was filtered and washed, the filtrate was evaporated under vacuum and the crude product was purified by recrystallization or column chromatography on silica gel eluting with a mixture of petroleum ether and ethyl acetate to give 5-substituted 1H-tetrazoles.
5-Phenyl-1H-tetrazole 1: white needles, m.p. 215–216 °C. 1H NMR (500 Hz, DMSO-d6): 8.05 (s, 2 H, Ar-H), 7.61 (s, 3 H, Ar-H) ppm. 13C NMR (125 Hz, DMSO-d6): 131.7, 129.9, 127.4, 124.6 ppm. ESI-MS (m/z): M-H = 145. IR: 1485, 1564, 1609, 2916 cm−1.
5-(2-Chlorophenyl)-1H-tetrazole 2: yellowish solid, m.p. 180–181 °C. 1H NMR (500 Hz, DMSO-d6): 7.83 (s, 1 H, Ar-H), 7.72 (s, 1 H, Ar-H), 7.65 (s, 1 H, Ar-H), 7.58 (s, 1 H, Ar-H) ppm. 13C NMR (125 Hz, DMSO-d6): 133.1, 132.4, 132.2, 130.9, 128.3, 124.6 ppm. ESI-MS m/z 179 [M – H]. IR: 1470, 1563, 1602, 2923 cm−1.
5-(4-Bromobenzyl)-1H-tetrazole 3: white needles, m.p. 178–180 °C. 1H NMR (500 Hz, DMSO-d6): 7.57 (s, 2 H, Ar-H), 7.28 (s, 2 H, Ar-H), 4.32 (s, 2 H, CH2–H) ppm. 13C NMR (125 Hz, DMSO-d6): 136.3, 132.6, 132.5, 131.9, 121.2, 29.2. ESI-MS m/z 238 [M – H]. IR: 1489, 1584, 1660, 2848 cm−1.
5-(4-Bromophenyl)-1H-tetrazole 4: yellowish solid, m.p. 268–270 °C (decompose). 1H NMR (500 Hz, DMSO-d6): 17.00 (brs, 1 H, N-H), 8.01–7.98 (m, 2 H, Ar-H), 7.85–7.82 (m, 2 H, Ar-H) ppm. 13C NMR (125 Hz, DMSO-d6): 155.0, 132.5, 128.9, 124.7, 123.6 ppm. ESI-MS m/z 224 [M – H]. IR: 1482, 1561, 1604, 2850 cm−1.
5-(4-Fluorophenyl)-1H-tetrazole 5: yellowish solid, m.p. 114–116 °C. 1H NMR (500 Hz, DMSO-d6): 16.91 (brs, 1 H, N-H), 8.12–8.07 (m, 2 H, Ar-H), 7.50–7.45 (m, 2 H, Ar-H) ppm. 13C NMR (125 Hz, DMSO-d6): 163.6 (d, J = 249 Hz), 154.6, 129.5 (d, J = 8.9 Hz), 116.6 (d, J = 22.3 Hz) ppm. ESI-MS m/z 163 [M – H]. IR: 1505, 1610, 2991 cm−1.
5-(3-Methoxyphenyl)-1H-tetrazole 6: white solid, m.p. 156–158 °C. 1H NMR (500 Hz, DMSO-d6): 16.88 (brs, 1 H, N-H), 7.64–7.62 (m, 1 H, Ar-H),7.60–7.59 (m, 1 H, Ar-H), 7.53 (t, 1 H, J = 8.05 Hz, Ar-H), 7.17 (ddd, 1 H, J = 0.8, 2.55, 3.4 Hz, Ar-H), 3.86 (s, 3 H, CH3-H) ppm. 13C NMR (125 Hz, DMSO-d6): 159.7, 155.0, 130.6, 125.2, 119.1, 117.0, 112.0, 55.3 ppm. ESI-MS m/z 175 [M – H]. IR: 1490, 1564, 1711, 2843 cm−1.
5-(2-Bromophenyl)-1H-tetrazole 7: yellowish solid, m.p. 178–179 °C. 1H NMR (500 Hz, DMSO-d6): 16.92 (brs, 1 H, N-H), 7.88 (dd, 1 H, J = 1.2, 1.3 Hz, Ar-H), 7.72 (dd, 1 H, J = 1.8, 1.8 Hz, Ar-H), 7.60 (td, 1 H, J = 1.3, 7.45 Hz, Ar-H), 7.55 (td, 1 H, J = 1.9, 7.85 Hz, Ar-H) ppm. 13C NMR (125 Hz, DMSO-d6): 154.6, 133.5, 132.7, 132.0, 128.1, 126.4, 121.7 ppm. ESI-MS m/z 224 [M – H]. IR: 1476, 1574, 1604 cm−1.
5-Benzyl-1H-tetrazole 8: white solid, m.p. 118–120 °C. 1H NMR (500 Hz, DMSO-d6): 16.18 (brs, 1 H, N-H), 7.35–7.32 (m, 2 H, Ar-H), 7.28–7.25 (m, 3 H, Ar-H), 4.29 (s, 2 H, CH2-H) ppm. 13C NMR (125 Hz, DMSO-d6): 155.2, 135.9, 128.7, 128.6, 127.0, 28.9 ppm. ESI-MS m/z 159 [M – H]. IR: 1493, 1531, 1548, 2951 cm−1.
5-(4-Methoxybenzyl)-1H-tetrazole 9: yellowish solid, m.p. 154–156 °C. 1H NMR (500 Hz, DMSO-d6): 16.07 (brs, 1 H, N-H), 7.20–7.18 (m, 2 H, Ar-H), 6.91–6.88 (m, 2 H, Ar-H), 4.20 (s, 2 H, CH2-H), 3.70 (s, 3 H, CH3-H) ppm. 13C NMR (125 Hz, DMSO-d6): 158.3, 129.7, 114.1, 55.1, 28.0 ppm. ESI-MS m/z 189 [M – H]. IR: 1513, 1554, 1612, 2838 cm−1.
4-(4-(1H-Tetrazol-5-yl)phenoxy)benzaldehyde 10: yellow solid, m.p. 172–174 °C. 1H NMR (500 Hz, DMSO-d6): 9.97 (s, 1 H, CHO-H), 8.13 (d, 2 H, J = 9.0 Hz, Ar-H), 7.98 (d, 2 H, J = 8.5 Hz, Ar-H), 7.37 (d, 2 H, J = 8.5 Hz, Ar-H), 7.26 (d, 1 H, J = 8.5 Hz, Ar-H) ppm. 13C NMR (125 Hz, DMSO-d6): 192.1, 161.7, 157.9, 132.6, 132.5, 129.8, 120.9, 119.1, 119.0, 107.2 ppm. ESI-MS m/z 265 [M – H]. IR: 1496, 1596, 1616, 1700 cm−1.
3-(1H-Tetrazol-5-yl)-2H-chromen-2-one 11: greenish solid, m.p. 244–246 °C. 1H NMR (500 Hz, DMSO-d6): 9.05 (s, 1 H, CH-H), 8.02 (d, 1 H, J = 7.5 Hz, Ar-H), 7.80–7.76 (m, 1 H, Ar-H), 7.56 (d, 1 H, J = 8.0 Hz, Ar-H), 7.53 (t, 1 H, J = 7.5 Hz, Ar-H) ppm. 13C NMR (125 Hz, DMSO-d6): 158.6, 154.1, 144.9, 134.5, 130.5, 125.7, 118.9, 116.9, 112.8, 102.2 ppm. ESI-MS m/z 213 [M – H]. IR: 1577, 1612, 1697, 3299 cm−1.
5-(4-Nitrobenzyl)-1H-tetrazole 12: Yellowish needles, m.p. 188–190 °C. 1H NMR (500 Hz, DMSO-d6): 8.23 (d, 2 H, J = 8.5 Hz, Ar-H), 7.58 (d, 2 H, J = 8.5 Hz, Ar-H), 4.50 (s, 2 H, CH2-H) ppm. 13C NMR (125 Hz, DMSO-d6): 156.1, 147.1, 144.2, 130.7, 124.3, 29.2 ppm. ESI-MS m/z 204 [M – H]. IR: 1349, 1536, 1584, 2719 cm−1.

4. Conclusions

In conclusion, we have described herein silica sulfuric acid catalyzed highly efficient, one-pot, protocol for the synthesis of 5-substituted 1H-tetrazoles through the [3+2] cycloaddition of various nitriles and sodium and azide in refluxing DMF in excellent yields. This method provides high conversions and yields, simplicity in operation and cost-effectiveness. Thus, we believe that this novel methodology will be a practical alternative to the existing procedures to cater to the needs of academia as well as industries. Further work is in progress to broaden the scope of this practical process.

Acknowledgments

Financial support from the Fundamental Research Funds for the Central Universities in NWSUAF (No. QN2009048) and the opening project of Xinjiang Production & Construction Corps Key Laboratory of Protection and Utilization of Biological Resources in Tarim Basin (BRTD1004) is greatly appreciated.

References

  1. Ostrovskii, V.A.; Koldobskii, G.I.; Trifonov, R.E. Tetrazoles. In Comprehensive Heterocyclic Chemistry III; Elsevier: Oxford, UK, 2008; Volume 6, p. 257. [Google Scholar]
  2. Bulter, R.N. Comprehensive Heterocyclic Chemistry II; Pergamon: New York, NY, USA, 1996; Volume 4, p. 621. [Google Scholar]
  3. Mukhopadhyay, S.; Lasri, J.; Guedes da Silva, M.F.C.; Januário Charmier, M.A.; Pombeiro, A.J.L. Activation of C–CN bond of propionitrile: An alternative route to the syntheses of 5-substituted- 1H-tetrazoles and dicyano-platinum(II) species. Polyhedron 2008, 27, 2883–2888. [Google Scholar]
  4. Zhang, Z.Y.; Yang, F.K. Syntheses of 5-[5-(3-pyridinyl)-2H-tetrazolylmethylene]-2-aroylamino- 1,3,4-triadizoles. Chin. Org. Chem 1994, 14, 553–554. [Google Scholar]
  5. Miller, A.E.; Feenev, D.J.; Ma, Y. Synthesis of N-(5-Tetrazolyl)-N′-(aryloxyacetyl)urea. Syn. Commun 1990, 20, 217–226. [Google Scholar]
  6. Holland, G.F.; Pereira, J.N. Heterocyclic Tetrazoles, a New Class of Lipolysis Inhibitors1. J. Med. Chem 1967, 10, 149–154. [Google Scholar]
  7. Pinkerton, A.B.; Vernier, J.-M.; Schaffhauser, H.; Rowe, B.A.; Campbell, U.C.; Rodriguez, D.E.; Lorrain, D.S.; Baccei, C.S.; Daggett, L.P.; Bristow, L.J. Phenyl-tetrazolyl acetophenones: Discovery of positive allosteric potentiatiors for the metabotropic glutamate 2 receptor. J. Med. Chem 2004, 47, 4595–4599. [Google Scholar]
  8. Govek, S.P.; Bonnefous, C.; Hutchinson, J.H.; Kamenecka, T.; McQuiston, J.; Pracitto, R.; Zhao, L.X.; Gardner, M.F.; James, J.K.; Daggett, L.P.; et al. Benzazoles as allosteric potentiators of metabotropic glutamate receptor 2 (mGluR2): Efficacy in an animal model for schizophrenia. Bioorg. Med. Chem. Lett 2005, 15, 4068–4072. [Google Scholar]
  9. Pinkerton, A.B.; Cube, R.V.; Hutchinson, J.H.; Rowe, B.A.; Schaffhauser, H.; Zhao, X.; Daggett, L.P.; Vernier, J.-M. Allosteric potentiators of the metabotropic glutamate receptor 2 (mGlu2). Part 1: Identification and synthesis of phenyl-tetrazolyl acetophenones. Bioorg. Med. Chem. Lett 2004, 14, 5329–5332. [Google Scholar]
  10. Blakemore, P.R.; Cole, W.J.; Kocieński, P.J.; Morley, A. A Stereoselective synthesis of trans-1,2-disubstituted alkenes based on the condensation of aldehydes with metallated 1-phenyl-1H-tetrazol-5-yl sulfones. Synlett 1998, 1998, 26–28. [Google Scholar]
  11. Pospíšil, J.; Markó, I.E. Efficient and stereoselective synthesis of allylic ethers and alcohols. Org. Lett 2006, 8, 5983–5986. [Google Scholar]
  12. Tamagaki, S.; Card, R.J.; Neckers, D.C. (Polystyrylbipyridine)(tetracarbonyl)tungsten. An active, reusable heterogeneous catalyst for metathesis of internal olefins. J. Am. Chem. Soc 1978, 100, 6635–6639. [Google Scholar]
  13. Zimmerman, D.M.; Olofson, R.A. The rapid synthesis of 1-substituted tetrazoles. Tetrahedron Lett 1969, 10, 5081–5084. [Google Scholar]
  14. Carini, D.J.; Duncia, J.V.; Aldrich, P.E.; Chiu, A.T.; Johnson, A.L.; Pierce, M.E.; Price, W.A.; Santella, J.B.; Wells, G.J. Nonpeptide angiotensin II receptor antagonists: The discovery of a series of N-(biphenylylmethyl)imidazoles as potent, orally active antihypertensives. J. Med. Chem 1991, 34, 2525–2547. [Google Scholar]
  15. Demko, Z.P.; Sharpless, K.B. Preparation of 5-substituted 1H-tetrazoles from nitriles in water. J. Org. Chem 2001, 66, 7945–7950. [Google Scholar]
  16. Himo, F.; Demko, Z.P.; Noodleman, L.; Sharpless, K.B. Mechanisms of tetrazole formation by addition of azide to nitriles. J. Am. Chem. Soc 2002, 124, 12210–12216. [Google Scholar]
  17. Matthews, D.P.; Green, J.E.; Shuker, A.J. Parallel synthesis of alkyl tetrazole derivatives using solid support chemistry. J. Comb. Chem 2000, 2, 19–23. [Google Scholar]
  18. Koguro, K.; Oga, T.; Mitsui, S.; Orita, R. Novel synthesis of 5-substituted tetrazole from nitriles. Synthesis 1998, 1998, 910–914. [Google Scholar]
  19. Kumar, A.; Narayanan, R.; Shechter, H. Rearrangement reactions of (Hydroxyphenyl)carbenes. J. Org. Chem 1996, 61, 4462–4465. [Google Scholar]
  20. Amantini, D.; Beleggia, R.; Fringuelli, F.; Pizzo, F.; Vaccaro, L. TBAF-catalyzed synthesis of 5-substituted 1H-tetrazoles under solventless conditions. J. Org. Chem 2004, 69, 2896–2898. [Google Scholar]
  21. Gyoung, Y.S.; Shim, J.-G.; Yamamoto, Y. Regiospecific synthesis of 2-allylated-5-substituted tetrazoles via palladium-catalyzed reaction of nitriles, trimethylsilyl azide, and allyl acetates. Tetrahedron Lett 2000, 41, 4193–4196. [Google Scholar]
  22. Kantam, M.L.; Shiva Kumar, K.B.; Phani Raja, K. An efficient synthesis of 5-substituted 1H-tetrazoles using Zn/Al hydrotalcite catalyst. J. Mol. Catal. A Chem 2006, 247, 186–188. [Google Scholar]
  23. Lakshmi Kantam, M.; Kumar, K.B.S.; Sridhar, C. Nanocrystalline ZnO as an efficient heterogeneous catalyst for the synthesis of 5-substituted 1H-tetrazoles. Adv. Synth. Catal 2005, 347, 1212–1214. [Google Scholar]
  24. Aridoss, G.; Laali, K.K. Highly efficient synthesis of 5-substituted 1H-tetrazoles catalyzed by Cu-Zn alloy nanopowder, conversion into 1,5- and 2,5-disubstituted tetrazoles, and synthesis and NMR studies of new tetrazolium ionic liquids. Eur. J. Org. Chem 2011, 2011, 6343–6355. [Google Scholar]
  25. Jin, T.; Kitahara, F.; Kamijo, S.; Yamamoto, Y. Copper-catalyzed synthesis of 5-substituted 1H-tetrazoles via the [3+2] cycloaddition of nitriles and trimethylsilyl azide. Tetrahedron Lett 2008, 49, 2824–2827. [Google Scholar]
  26. Nasrollahzadeh, M.; Bayat, Y.; Habibi, D.; Moshaee, S. FeCl3-SiO2 as a reusable heterogeneous catalyst for the synthesis of 5-substituted 1H-tetrazoles via [2+3] cycloaddition of nitriles and sodium azide. Tetrahedron Lett 2009, 50, 4435–4438. [Google Scholar]
  27. Shirini, F.; Zolfigol, M.A.; Salehi, P. Silica sulfuric acid and silica chloride as efficient reagents for organic reactions. Curr. Org. Chem 2006, 10, 2171–2189. [Google Scholar]
  28. Shaterian, H.R.; Ghashang, M.; Feyzi, M. Silica sulfuric acid as an efficient catalyst for the preparation of 2H-indazolo[2,1-b]phthalazine-triones. Appl. Catal. A 2008, 345, 128–133. [Google Scholar]
  29. Salehi, P.; Dabiri, M.; Zolfigol, M.A.; Bodaghi Fard, M.A. Silica sulfuric acid: An efficient and reusable catalyst for the one-pot synthesis of 3,4-dihydropyrimidin-2(1H)-ones. Tetrahedron Lett 2003, 44, 2889–2891. [Google Scholar]
  30. Lu, J.; Xu, J.; Ni, L.-W.; Ma, W.-L.; Du, Z.-T. 4-[4-(1H-Tetrazol-5-yl)phenoxy]benzaldehyde. Acta Crystallogr. E 2011, 67. [Google Scholar] [CrossRef]
Figure 1. ORTP drawing of 10.
Figure 1. ORTP drawing of 10.
Ijms 13 04696f1
Table 1. SiO2-H2SO4 catalyzed [3+2] cycloaddition of benzonitriles and sodium azide in different solvents.
Table 1. SiO2-H2SO4 catalyzed [3+2] cycloaddition of benzonitriles and sodium azide in different solvents.
EntrySolventTimemol Ratio of SiO2-H2SO4Yield (100%)
1Methanol1250%<10
2Ethanol1250%10
3Toulene1250%5
4Chloroform1250%No reaction
5DMF550%92
6DMSO550%89
7DMF1050%85
8DMF5200%93
Table 2. Silica sulfuric acid catalyzed synthesis of 5-substituted 1H-tetrazoles through [3+2] cycloaddition of benzonitriles and sodium azide in DMF.
Table 2. Silica sulfuric acid catalyzed synthesis of 5-substituted 1H-tetrazoles through [3+2] cycloaddition of benzonitriles and sodium azide in DMF.
EntryNitrilesTetrazolesYield (%)
1Ijms 13 04696f2Ijms 13 04696f388
2Ijms 13 04696f4Ijms 13 04696f572
3Ijms 13 04696f6Ijms 13 04696f788
4Ijms 13 04696f8Ijms 13 04696f979
5Ijms 13 04696f10Ijms 13 04696f1188
6Ijms 13 04696f12Ijms 13 04696f1395
7Ijms 13 04696f14Ijms 13 04696f1592
8Ijms 13 04696f16Ijms 13 04696f1774
9Ijms 13 04696f18Ijms 13 04696f1972
10Ijms 13 04696f20Ijms 13 04696f2188
11Ijms 13 04696f22Ijms 13 04696f2380
12Ijms 13 04696f24Ijms 13 04696f2576

Share and Cite

MDPI and ACS Style

Du, Z.; Si, C.; Li, Y.; Wang, Y.; Lu, J. Improved Synthesis of 5-Substituted 1H-Tetrazoles via the [3+2] Cycloaddition of Nitriles and Sodium Azide Catalyzed by Silica Sulfuric Acid. Int. J. Mol. Sci. 2012, 13, 4696-4703. https://doi.org/10.3390/ijms13044696

AMA Style

Du Z, Si C, Li Y, Wang Y, Lu J. Improved Synthesis of 5-Substituted 1H-Tetrazoles via the [3+2] Cycloaddition of Nitriles and Sodium Azide Catalyzed by Silica Sulfuric Acid. International Journal of Molecular Sciences. 2012; 13(4):4696-4703. https://doi.org/10.3390/ijms13044696

Chicago/Turabian Style

Du, Zhenting, Changmei Si, Youqiang Li, Yin Wang, and Jing Lu. 2012. "Improved Synthesis of 5-Substituted 1H-Tetrazoles via the [3+2] Cycloaddition of Nitriles and Sodium Azide Catalyzed by Silica Sulfuric Acid" International Journal of Molecular Sciences 13, no. 4: 4696-4703. https://doi.org/10.3390/ijms13044696

Article Metrics

Back to TopTop