Next Article in Journal
Design and Performance Testing of a Novel Three-Dimensional Elliptical Vibration Turning Device
Previous Article in Journal
The Analysis of Three-Body Contact Temperature under the Different Third Particle Size, Density, and Value of Friction
 
 
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Correction

Correction: Li, H. et al. Research on Design and Simulation of Biaxial Tensile-Bending Complex Mechanical Performance Test Apparatus. Micromachines, 2017, 8, 286

1
School of Mechanical Science & Engineering, Jilin University, Changchun 130025, China
2
School of Mechanical Science & Engineering, Beihua University, Jilin 132021, China
*
Author to whom correspondence should be addressed.
Micromachines 2017, 8(10), 303; https://doi.org/10.3390/mi8100303
Submission received: 10 October 2017 / Accepted: 10 October 2017 / Published: 12 October 2017
In the published paper [1], there is an error in Figure 8. The labels in Figure 8 was incorrect, it should be corrected as follows:
  • ■—Characteristic point A, Elastic deformation;
  • —Characteristic point B, Elastic deformation;
  • —Characteristic point C, Elastic deformation;
  • □—Characteristic point A, Plastic deformation;
  • —Characteristic point B, Plastic deformation;
  • —Characteristic point C, Plastic deformation;
The correct figure should read as follows:
Figure 8. Displacement-dependent variation for strain of the specimen under biaxial tensile load.
Figure 8. Displacement-dependent variation for strain of the specimen under biaxial tensile load.
Micromachines 08 00303 g001
The authors apologize for any inconvenience caused by the error. The manuscript will be updated online and the previous version will remain available on the article webpage.

Reference

  1. Li, H.; Zhao, H.; Luo, C.; Li, L.; Zhang, H. Research on Design and Simulation of Biaxial Tensile-Bending Complex Mechanical Performance Test Apparatus. Micromachines 2017, 8, 286. [Google Scholar] [CrossRef]

Share and Cite

MDPI and ACS Style

Li, H.; Zhao, H.; Luo, C.; Li, L.; Zhang, H. Correction: Li, H. et al. Research on Design and Simulation of Biaxial Tensile-Bending Complex Mechanical Performance Test Apparatus. Micromachines, 2017, 8, 286. Micromachines 2017, 8, 303. https://doi.org/10.3390/mi8100303

AMA Style

Li H, Zhao H, Luo C, Li L, Zhang H. Correction: Li, H. et al. Research on Design and Simulation of Biaxial Tensile-Bending Complex Mechanical Performance Test Apparatus. Micromachines, 2017, 8, 286. Micromachines. 2017; 8(10):303. https://doi.org/10.3390/mi8100303

Chicago/Turabian Style

Li, Hailian, Hongwei Zhao, Chunyang Luo, Lijia Li, and He Zhang. 2017. "Correction: Li, H. et al. Research on Design and Simulation of Biaxial Tensile-Bending Complex Mechanical Performance Test Apparatus. Micromachines, 2017, 8, 286" Micromachines 8, no. 10: 303. https://doi.org/10.3390/mi8100303

Note that from the first issue of 2016, this journal uses article numbers instead of page numbers. See further details here.

Article Metrics

Back to TopTop