Next Article in Journal
Acknowledgement to Reviewers of Aerospace in 2016
Previous Article in Journal
A Two-Temperature Open-Source CFD Model for Hypersonic Reacting Flows, Part Two: Multi-Dimensional Analysis
 
 
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Correction

Correction: Iemma, U. Theoretical and Numerical Modeling of Acoustic Metamaterials for Aeroacoustic Applications. Aerospace 2016, 3, 15

Department of Engineering, Roma Tre University, via Vito Volterra 62, Rome 00146, Italy
Aerospace 2016, 3(4), 46; https://doi.org/10.3390/aerospace3040046
Submission received: 14 December 2016 / Revised: 14 December 2016 / Accepted: 20 December 2016 / Published: 22 December 2016
The author regrets that this paper [1] contains a typographical error in Equation (1), i.e., the equation governing the propagation of an acoustic disturbance within a metamaterial with anisotropic inertia. The correct form is shown in Table 1.
The error, not noticed during the proofreading process, was a simple mistype. The analytical developments and the results following Equation (1) are in no way adversely affected by this typo.
The author would like to apologize for any inconvenience caused. The manuscript will be updated and the original will remain online on the article webpage.

Reference

  1. Iemma, U. Theoretical and Numerical Modeling of Acoustic Metamaterials for Aeroacoustic Applications. Aerospace 2016, 3, 15. [Google Scholar] [CrossRef]
Table 1. Correct form of Equation (1).
Table 1. Correct form of Equation (1).
Published EquationCorrected Equation
  · ( ϱ 1   p ) + p ¨ = 0   · ( ϱ 1   p ) p ¨ = 0

Share and Cite

MDPI and ACS Style

Iemma, U. Correction: Iemma, U. Theoretical and Numerical Modeling of Acoustic Metamaterials for Aeroacoustic Applications. Aerospace 2016, 3, 15. Aerospace 2016, 3, 46. https://doi.org/10.3390/aerospace3040046

AMA Style

Iemma U. Correction: Iemma, U. Theoretical and Numerical Modeling of Acoustic Metamaterials for Aeroacoustic Applications. Aerospace 2016, 3, 15. Aerospace. 2016; 3(4):46. https://doi.org/10.3390/aerospace3040046

Chicago/Turabian Style

Iemma, Umberto. 2016. "Correction: Iemma, U. Theoretical and Numerical Modeling of Acoustic Metamaterials for Aeroacoustic Applications. Aerospace 2016, 3, 15" Aerospace 3, no. 4: 46. https://doi.org/10.3390/aerospace3040046

Note that from the first issue of 2016, this journal uses article numbers instead of page numbers. See further details here.

Article Metrics

Back to TopTop