Polymeric Photocatalysts and Gas Sensors

A special issue of Polymers (ISSN 2073-4360).

Deadline for manuscript submissions: closed (28 October 2018) | Viewed by 53459

Special Issue Editors

Department of Chemical Engineering, Feng Chia University, 100, Wenhwa Road, Seatwen, Taichung 40724, Taiwan
Interests: polymers and nanomaterials for optoelectronic and biomedical applications; semiconductor nanomaterial-based photocatalysts and gas sensor; organic molecule/polymer-based chemical sensor and biosensor; materials for environmental protection/energy applications
Special Issues, Collections and Topics in MDPI journals
Department of Chemical Engineering, Feng Chia University, Taichung, Taiwan
Interests: polymer; oil–water separation; anion detection; colorimetric sensors; adsorption; heavy metals removal; ionic liquids; stimuli-responsive polymers; polymer-protein interactions; protein folding, biosensor

Special Issue Information

Dear Colleagues,

The development of polymeric gas sensors and photocatalysts are the hot topics. Polymeric photocatalysts can offer tailor-made properties as their electronic, optical, and chemical properties can be tuned for target applications by doping, molecular engineering, surface functionalization and etc. Polymeric gas sensors offer numerous advantages due to their relatively low cost, quite simple fabrication process, wide choice of molecular structures, and the possibility to build in side-chains, charged or neutral particles.

The Special Issue will focus on research papers about polymers, gels, polymer composites, and hybrid assemblies for photocatalyst and gas sensor applications. Contributions related to design, modelling, synthesis, processing and applications, together with those devoted to structure/property correlations of polymers and polymer composites will be welcomed. Polymer photocatalysts include carbon nitride, conjugated microporous polymer, covalent triazine framework, and planarized conjugated polymer, and conducting polymer nanostructure, etc. Examples of relevant photocatalyst applications include the use of polymers and polymer composites for photocatalytic degradation of hazardous materials, photocatalytic water splitting, photocatalytic oxidation/reduction and other photocatalytic applications. The synthesis and characterization of polymeric materials in gas sensing applications is also welcomed, including gas sensors and chemical vapor sensors based on conducting polymers (such as polyaniline, polypyrrole, polythiophene, etc.), polymeric electrolytes, polymer composites (with metal oxide, carbon nanotube, graphene, etc.), and porphyrinic polymer, etc. New polymer materials or new devices leading to enhanced performances, and new insights towards the structure-property correlations are of particular interests.

Prof. Dr. Chi-Jung Chang
Guest Editor

Dr. P. Madhusudhana Reddy
Co-guest Editor

Manuscript Submission Information

Manuscripts should be submitted online at www.mdpi.com by registering and logging in to this website. Once you are registered, click here to go to the submission form. Manuscripts can be submitted until the deadline. All submissions that pass pre-check are peer-reviewed. Accepted papers will be published continuously in the journal (as soon as accepted) and will be listed together on the special issue website. Research articles, review articles as well as short communications are invited. For planned papers, a title and short abstract (about 100 words) can be sent to the Editorial Office for announcement on this website.

Submitted manuscripts should not have been published previously, nor be under consideration for publication elsewhere (except conference proceedings papers). All manuscripts are thoroughly refereed through a single-blind peer-review process. A guide for authors and other relevant information for submission of manuscripts is available on the Instructions for Authors page. Polymers is an international peer-reviewed open access semimonthly journal published by MDPI.

Please visit the Instructions for Authors page before submitting a manuscript. The Article Processing Charge (APC) for publication in this open access journal is 2700 CHF (Swiss Francs). Submitted papers should be well formatted and use good English. Authors may use MDPI's English editing service prior to publication or during author revisions.

Keywords

  • Polymers, polymeric electrolytes, gels, composites, hybrid, and assemblies
  • Polymers for gas sensors
  • Polymers for chemical vapor sensors (volatile organic compound Sensors)
  • Polymers for photocatalyst
  • Polymers for photocatalytic water splitting
  • Polymers for photocatalytic oxidation/reduction

Published Papers (8 papers)

Order results
Result details
Select all
Export citation of selected articles as:

Research

Jump to: Review

14 pages, 14440 KiB  
Article
Sensitivity Enhancement of Acetone Gas Sensor using Polyethylene Glycol/Multi-Walled Carbon Nanotubes Composite Sensing Film with Thermal Treatment
by Jin-Chern Chiou, Chin-Cheng Wu and Tse-Mei Lin
Polymers 2019, 11(3), 423; https://doi.org/10.3390/polym11030423 - 05 Mar 2019
Cited by 16 | Viewed by 3425
Abstract
There is a need to develop a chemiresistive gas sensor equipped with a thermostat over a wide area for the sensor, which can protect the sensor from the influence of ambient temperature due to the uniform temperature of the thermostat. In this paper, [...] Read more.
There is a need to develop a chemiresistive gas sensor equipped with a thermostat over a wide area for the sensor, which can protect the sensor from the influence of ambient temperature due to the uniform temperature of the thermostat. In this paper, we demonstrated an acetone gas sensor based on a polyethylene glycol (PEG)/Multi-walled Carbon Nanotubes (MWCNTs) composite film, which was equipped with a thermostat. The sensor was operated at modest working temperatures for sensor sensitivity enhancement. The optimum design of the polyimide-based thermostat with widely uniform thermal distribution was investigated in detail. It was found that the temperature uniformity of the thermostat was achieved using double spiral geometry. The experimental results of the sensor response showed that the PEG/MWCNTs composite film with a moderate working temperature revealed a higher sensitivity than that without thermal treatment. Moreover, the sensing mechanisms of the PEG/MWCNTs composite gas sensor to acetone vapor were studied as well. Full article
(This article belongs to the Special Issue Polymeric Photocatalysts and Gas Sensors)
Show Figures

Figure 1

16 pages, 6428 KiB  
Article
High Response CO Sensor Based on a Polyaniline/SnO2 Nanocomposite
by Kai-Syuan Jian, Chi-Jung Chang, Jerry J. Wu, Yu-Cheng Chang, Chien-Yie Tsay, Jing-Heng Chen, Tzyy-Leng Horng, Gang-Juan Lee, Lakshmanan Karuppasamy, Sambandam Anandan and Chin-Yi Chen
Polymers 2019, 11(1), 184; https://doi.org/10.3390/polym11010184 - 21 Jan 2019
Cited by 46 | Viewed by 5457
Abstract
A polyaniline (PANI)/tin oxide (SnO2) composite for a CO sensor was fabricated using a composite film composed of SnO2 nanoparticles and PANI deposition in the present study. Tin oxide nanoparticles were synthesized by the sol-gel method. The SnO2 nanoparticles [...] Read more.
A polyaniline (PANI)/tin oxide (SnO2) composite for a CO sensor was fabricated using a composite film composed of SnO2 nanoparticles and PANI deposition in the present study. Tin oxide nanoparticles were synthesized by the sol-gel method. The SnO2 nanoparticles provided a high surface area to significantly enhance the response to the change in CO concentration at low operating temperature (<75 °C). The excellent sensor response was mainly attributed to the relatively good properties of PANI in the redox reaction during sensing, which produced a great resistance difference between the air and CO gas at low operating temperature. Therefore, the combination of n-type SnO2 nanoparticles with a high surface area and a thick film of conductive PANI is an effective strategy to design a high-performance CO gas sensor. Full article
(This article belongs to the Special Issue Polymeric Photocatalysts and Gas Sensors)
Show Figures

Figure 1

14 pages, 2389 KiB  
Article
Photocatalytic Dye and Cr(VI) Degradation Using a Metal-Free Polymeric g-C3N4 Synthesized from Solvent-Treated Urea
by Chechia Hu, Yi-Ching Chu, Yan-Ru Lin, Hung-Chun Yang and Ke-Hsuan Wang
Polymers 2019, 11(1), 182; https://doi.org/10.3390/polym11010182 - 21 Jan 2019
Cited by 35 | Viewed by 6729
Abstract
The development of visible-light-driven polymeric g-C3N4 is in response to an emerging demand for the photocatalytic dye degradation and reduction of hexavalent chromium ions. We report the synthesis of g-C3N4 from urea treated with various solvents such [...] Read more.
The development of visible-light-driven polymeric g-C3N4 is in response to an emerging demand for the photocatalytic dye degradation and reduction of hexavalent chromium ions. We report the synthesis of g-C3N4 from urea treated with various solvents such as methanol, ethanol, and ethylene glycol. The samples were characterized and the Williamson–Hall method was applied to investigate the lattice strain of the samples. The activity of the samples was evaluated by observing the degradation of methyl orange and K2Cr2O7 solution under light irradiation. Photocatalytic reaction kinetics were determined as pseudo-first-order and zero-order for the degradation of methyl orange and reduction of hexavalent chromium, respectively. Due to the inhibited charge separation resulting from the small lattice strain, reduced crystal imperfection, and sheet-like structure, g-C3N4 obtained from ethanol-treated urea exhibited the highest activity among the evaluated samples. Full article
(This article belongs to the Special Issue Polymeric Photocatalysts and Gas Sensors)
Show Figures

Graphical abstract

16 pages, 4885 KiB  
Article
Anatase TiO2-Decorated Graphitic Carbon Nitride for Photocatalytic Conversion of Carbon Dioxide
by I-Hsiang Tseng, Yu-Min Sung, Po-Ya Chang and Chin-Yi Chen
Polymers 2019, 11(1), 146; https://doi.org/10.3390/polym11010146 - 16 Jan 2019
Cited by 24 | Viewed by 5865
Abstract
Three types of graphitic carbon nitride (gCN) nanosheets were derived from direct thermal condensation of urea, melamine, and dicyandiamide, respectively. As the sample (uCN) synthesized from urea exhibited porous morphology and highest surface area among other gCN, anatase TiO2 nanoparticles were then [...] Read more.
Three types of graphitic carbon nitride (gCN) nanosheets were derived from direct thermal condensation of urea, melamine, and dicyandiamide, respectively. As the sample (uCN) synthesized from urea exhibited porous morphology and highest surface area among other gCN, anatase TiO2 nanoparticles were then in-situ deposited on uCN via solvothermal process without further calcination. The resultant Ti/uCN_x samples remained with higher surface area and exhibited visible-light activity. The derived band structure of each sample also confirmed its ability to photoreduce CO2. XPS results revealed surface compositions of each sample. Those functional groups governed adsorption of reactant, interfacial interaction, electron transfer rate, and consequently influenced the yield of products. Carbon monoxide and methanol were detected from LED-lamp illuminated samples under appropriate moisture content. Samples with higher ratio of terminal amine groups produced more CO. The presence of hydroxyl groups promoted the initial conversion of methanol. The obtained Ti/uCN_0.5 and Ti/uCN_1.5 samples exhibited better quantum efficiency toward CO2 conversion and demonstrated stability to consistently produce CO under cycling photoreaction. Full article
(This article belongs to the Special Issue Polymeric Photocatalysts and Gas Sensors)
Show Figures

Graphical abstract

14 pages, 4338 KiB  
Article
The Ternary Heterostructures of BiOBr/Ultrathin g-C3N4/Black Phosphorous Quantum Dot Composites for Photodegradation of Tetracycline
by Tianhao Jiang, Chaoqun Shang, Qingguo Meng, Mingliang Jin, Hua Liao, Ming Li, Zhihong Chen, Mingzhe Yuan, Xin Wang and Guofu Zhou
Polymers 2018, 10(10), 1118; https://doi.org/10.3390/polym10101118 - 09 Oct 2018
Cited by 10 | Viewed by 4007
Abstract
Herein, we synthesized BiOBr/ultrathin g-C3N4/ternary heterostructures modified with black phosphorous quantum dots using a simple water bath heating and sonication method. The ternary heterostructure was then used for the photocatalytic degradation of tetracycline in visible light, with an efficiency [...] Read more.
Herein, we synthesized BiOBr/ultrathin g-C3N4/ternary heterostructures modified with black phosphorous quantum dots using a simple water bath heating and sonication method. The ternary heterostructure was then used for the photocatalytic degradation of tetracycline in visible light, with an efficiency as high as 92% after 3 h of irradiation. Thus, the photodegradation efficiency is greatly improved compared to that of ultrathin g-C3N4, BiOBr, and black phosphorous quantum dots alone. The synthesized ternary heterostructure improves the charge separation efficiency, thus increasing the photodegradation efficiency. This work provides a new and efficient method for the degradation of antibiotics in the environment. Full article
(This article belongs to the Special Issue Polymeric Photocatalysts and Gas Sensors)
Show Figures

Figure 1

10 pages, 3335 KiB  
Article
Enhancement of Rhodamine B Degradation by Ag Nanoclusters-Loaded g-C3N4 Nanosheets
by Thi Mai Oanh Le, Thi Hang Lam, Thi Nhung Pham, Tuan Cuong Ngo, Ngoc Diep Lai, Danh Bich Do and Van Minh Nguyen
Polymers 2018, 10(6), 633; https://doi.org/10.3390/polym10060633 - 08 Jun 2018
Cited by 21 | Viewed by 5585
Abstract
In this paper, silver (Ag) nanoclusters-loaded graphitic carbon nitride (g-C3N4) nanosheets are synthesized and their physical properties as well as photocatalytic activities are systematically investigated by different techniques. The existence of Ag atoms in the form of nanoclusters (NCs) [...] Read more.
In this paper, silver (Ag) nanoclusters-loaded graphitic carbon nitride (g-C3N4) nanosheets are synthesized and their physical properties as well as photocatalytic activities are systematically investigated by different techniques. The existence of Ag atoms in the form of nanoclusters (NCs) rather than well-crystallized nanoparticles are evidenced by X-ray diffraction patterns, SEM images, and XPS spectra. The deposition of Ag nanoclusters on the surface of g-C3N4 nanosheets affect the crystal structure and slightly reduce the band gap energy of g-C3N4. The sharp decrease of photoluminescence intensity indicates that g-C3N4/Ag heterojunctions successfully prevent the recombination of photo-generated electrons and holes. The photocatalytic activities of as-synthesized photocatalysts are demonstrated through the degradation of rhodamine B (RhB) solutions under Xenon lamp irradiation. It is demonstrated that the photocatalytic activity depends strongly on the molar concentration of Ag+ in the starting solution. The g-C3N4/Ag heterojunctions prepared from 0.01 M of Ag+ starting solution exhibit the highest photocatalytic efficiency and allow 100% degradation of RhB after being exposed for 60 min under a Xenon lamp irradiation, which is four times faster than that of pure g-C3N4 nanosheets. Full article
(This article belongs to the Special Issue Polymeric Photocatalysts and Gas Sensors)
Show Figures

Figure 1

Review

Jump to: Research

31 pages, 3803 KiB  
Review
Recent Progress of Carbon Dot Precursors and Photocatalysis Applications
by Kuan-Wu Chu, Sher Ling Lee, Chi-Jung Chang and Lingyun Liu
Polymers 2019, 11(4), 689; https://doi.org/10.3390/polym11040689 - 16 Apr 2019
Cited by 123 | Viewed by 11858
Abstract
Carbon dots (CDs), a class of carbon-based sub-ten-nanometer nanoparticles, have attracted great attention since their discovery fifteen years ago. Because of the outstanding photoluminescence properties, photostability, low toxicity, and low cost, CDs have potential to replace traditional semiconductor quantum dots which have serious [...] Read more.
Carbon dots (CDs), a class of carbon-based sub-ten-nanometer nanoparticles, have attracted great attention since their discovery fifteen years ago. Because of the outstanding photoluminescence properties, photostability, low toxicity, and low cost, CDs have potential to replace traditional semiconductor quantum dots which have serious drawbacks of toxicity and high cost. This review covers the common top-down and bottom-up methods for the synthesis of CDs, different categories of CD precursors (small molecules, natural polymers, and synthetic polymers), one-pot and multi-step methods to produce CDs/photocatalyst composites, and recent advances of CDs on photocatalysis applications mostly in pollutant degradation and energy areas. A broad range of precursors forming fluorescent CDs are discussed, including small molecule sole or dual precursors, natural polymers such as pure polysaccharides and proteins and crude bio-resources from plants or animals, and various synthetic polymer precursors with positive, negative, neutral and hydrophilic, hydrophobic, or zwitterionic feature. Because of the wide light absorbance, excellent photoluminescence properties and electron transfer ability, CDs have emerged as a new type of photocatalyst. Recent work of CDs as sole photocatalyst or in combination with other materials (e.g., metal, metal sulfide, metal oxide, bismuth-based semiconductor, or other traditional photocatalysts) to form composite catalyst for various photocatalytic applications are reviewed. Possible future directions are proposed at the end of the article on mechanistic studies, production of CDs with better controlled properties, expansion of polymer precursor pool, and systematic studies of CDs for photocatalysis applications. Full article
(This article belongs to the Special Issue Polymeric Photocatalysts and Gas Sensors)
Show Figures

Graphical abstract

21 pages, 3112 KiB  
Review
Recent Developments about Conductive Polymer Based Composite Photocatalysts
by Sher Ling Lee and Chi-Jung Chang
Polymers 2019, 11(2), 206; https://doi.org/10.3390/polym11020206 - 24 Jan 2019
Cited by 127 | Viewed by 9587
Abstract
Conductive polymers have been widely investigated in various applications. Several conductive polymers, such as polyaniline (PANI), polypyrrole (PPy), poly(3,4-ethylenedioxythiophene) (PEDOT)), and polythiophene (PTh) have been loaded with various semiconductor nanomaterials to prepare the composite photocatalysts. However, a critical review of conductive polymer-based composite [...] Read more.
Conductive polymers have been widely investigated in various applications. Several conductive polymers, such as polyaniline (PANI), polypyrrole (PPy), poly(3,4-ethylenedioxythiophene) (PEDOT)), and polythiophene (PTh) have been loaded with various semiconductor nanomaterials to prepare the composite photocatalysts. However, a critical review of conductive polymer-based composite photocatalysts has not been available yet. Therefore, in this review, we summarized the applications of conductive polymers in the preparation of composite photocatalysts for photocatalytic degradation of hazardous chemicals, antibacterial, and photocatalytic hydrogen production. Various materials were systematically surveyed to illustrate their preparation methods, morphologies, and photocatalytic performances. The synergic effect between conductive polymers and semiconductor nanomaterials were observed for a lot of composite photocatalysts. The band structures of the composite photocatalysts can be analyzed to explain the mechanism of their enhanced photocatalytic activity. The incorporation of conductive polymers can result in significantly improved visible-light driven photocatalytic activity by enhancing the separation of photoexcited charge carriers, extending the light absorption range, increasing the adsorption of reactants, inhibiting photo-corrosion, and reducing the formation of large aggregates. This review provides a systematic concept about how conductive polymers can improve the performance of composite photocatalysts. Full article
(This article belongs to the Special Issue Polymeric Photocatalysts and Gas Sensors)
Show Figures

Graphical abstract

Back to TopTop