Next Article in Journal
Effect of Chromium and Molybdenum Addition on the Microstructure of In Situ TiC-Reinforced Composite Surface Layers Fabricated on Ductile Cast Iron by Laser Alloying
Next Article in Special Issue
Analysis and Modeling of the Micro-Cutting Process of Ti-6Al-4V Titanium Alloy with Single Abrasive Grain
Previous Article in Journal
Mechanical Properties and Metal-Ceramic Bond Strength of Co-Cr Alloy Manufactured by Selective Laser Melting
Previous Article in Special Issue
Laser Fabrication of Anti-Icing Surfaces: A Review
 
 
Article

Article Versions Notes

Materials 2020, 13(24), 5747; https://doi.org/10.3390/ma13245747
Action Date Notes Link
article xml file uploaded 16 December 2020 13:59 CET Original file -
article xml uploaded. 16 December 2020 13:59 CET Update -
article pdf uploaded. 16 December 2020 13:59 CET Version of Record https://www.mdpi.com/1996-1944/13/24/5747/pdf-vor
article html file updated 16 December 2020 14:01 CET Original file -
article xml file uploaded 21 December 2020 07:46 CET Update -
article xml uploaded. 21 December 2020 07:46 CET Update https://www.mdpi.com/1996-1944/13/24/5747/xml
article pdf uploaded. 21 December 2020 07:46 CET Updated version of record https://www.mdpi.com/1996-1944/13/24/5747/pdf
article html file updated 21 December 2020 07:49 CET Update -
article html file updated 23 July 2022 05:26 CEST Update https://www.mdpi.com/1996-1944/13/24/5747/html
Back to TopTop