Error in Table
In the original publication [1], there was a mistake in the legend for Table 4: Summary of bending characteristic-values of EPC, EPP and EPET at 25, 80 and 110 °C. There is a copy and paste error. In the EPC 110 °C column, the values need to be (top to bottom) 61.0 ± 2.2; 1.4 ± 0.10; 9.5 ± 0.5; 7.7 ± 0.6. The correct legend appears below. The authors apologize for any inconvenience caused and state that the scientific conclusions are unaffected. The original publication has also been updated.
Table 4.
Summary of bending characteristic-values of EPC, EPP and EPET at 25, 80 and 110 °C.
Reference
- Weingart, N.; Raps, D.; Kuhnigk, J.; Klein, A.; Altstädt, V. Expanded Polycarbonate (EPC)—A New Generation of High-Temperature Engineering Bead Foams. Polymers 2020, 12, 2314. [Google Scholar] [CrossRef] [PubMed]
Publisher’s Note: MDPI stays neutral with regard to jurisdictional claims in published maps and institutional affiliations. |
© 2022 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (https://creativecommons.org/licenses/by/4.0/).