Next Article in Journal
Quality Performance Evaluation of Thin Walled PLA 3D Printed Parts Using the Taguchi Method and Grey Relational Analysis
Next Article in Special Issue
Process Data-Based Knowledge Discovery in Additive Manufacturing of Ceramic Materials by Multi-Material Jetting (CerAM MMJ)
Previous Article in Journal
A Novel Experimental Test Bench to Investigate the Effects of Cutting Fluids on the Frictional Conditions in Metal Cutting
Previous Article in Special Issue
Investigation of Process Control Influence on Tribological Properties of FLM-Manufactured Components
 
 
Article

Article Versions Notes

J. Manuf. Mater. Process. 2020, 4(2), 46; https://doi.org/10.3390/jmmp4020046
Action Date Notes Link
article xml file uploaded 15 May 2020 08:39 CEST Original file -
article xml uploaded. 15 May 2020 08:39 CEST Update -
article pdf uploaded. 15 May 2020 08:39 CEST Version of Record -
article html file updated 15 May 2020 08:41 CEST Original file -
article xml file uploaded 15 May 2020 09:04 CEST Update -
article xml uploaded. 15 May 2020 09:04 CEST Update https://www.mdpi.com/2504-4494/4/2/46/xml
article pdf uploaded. 15 May 2020 09:04 CEST Updated version of record https://www.mdpi.com/2504-4494/4/2/46/pdf
article html file updated 15 May 2020 09:06 CEST Update -
article html file updated 21 July 2022 04:55 CEST Update https://www.mdpi.com/2504-4494/4/2/46/html
Back to TopTop