Previous Article in Journal
Improving Robotic Milling Performance through Active Damping of Low-Frequency Structural Modes
Previous Article in Special Issue
Optimizing Milling Parameters for Enhanced Machinability of 3D-Printed Materials: An Analysis of PLA, PETG, and Carbon-Fiber-Reinforced PETG
 
 
Article

Article Versions Notes

J. Manuf. Mater. Process. 2024, 8(4), 161; https://doi.org/10.3390/jmmp8040161 (registering DOI)
Action Date Notes Link
article xml file uploaded 27 July 2024 10:39 CEST Original file -
article xml uploaded. 27 July 2024 10:39 CEST Update -
article pdf uploaded. 27 July 2024 10:39 CEST Version of Record -
article html file updated 27 July 2024 10:41 CEST Original file -
article xml file uploaded 27 July 2024 11:06 CEST Update -
article xml uploaded. 27 July 2024 11:06 CEST Update -
article pdf uploaded. 27 July 2024 11:06 CEST Updated version of record -
article xml file uploaded 27 July 2024 11:07 CEST Update -
article xml uploaded. 27 July 2024 11:07 CEST Update https://www.mdpi.com/2504-4494/8/4/161/xml
article pdf uploaded. 27 July 2024 11:07 CEST Updated version of record https://www.mdpi.com/2504-4494/8/4/161/pdf
article html file updated 27 July 2024 11:07 CEST Update -
article html file updated 27 July 2024 11:09 CEST Update https://www.mdpi.com/2504-4494/8/4/161/html
Back to TopTop