Reprint
Mathematical Models for the Design of Electrical Machines
Edited by
March 2021
252 pages
- ISBN978-3-0365-0398-1 (Hardback)
- ISBN978-3-0365-0399-8 (PDF)
This is a Reprint of the Special Issue Mathematical Models for the Design of Electrical Machines that was published in
Computer Science & Mathematics
Summary
This book is a comprehensive set of articles reflecting the latest advances and developments in mathematical modeling and the design of electrical machines for different applications. The main models discussed are based on the: i) Maxwell–Fourier method (i.e., the formal resolution of Maxwell’s equations by using the separation of variables method and the Fourier’s series in 2-D or 3-D with a quasi-Cartesian or polar coordinate system); ii) electrical, thermal and magnetic equivalent circuit; iii) hybrid model. In these different papers, the numerical method and the experimental tests have been used as comparisons or validations.
Format
- Hardback
License and Copyright
© 2022 by the authors; CC BY-NC-ND license
Keywords
surface-mounted PM machines; torque pulsation; magnet shape optimization; analytical expression; 2D; electromagnetic performances; finite iron relative permeability; numerical; sinusoidal current excitation; subdomain technique; switched reluctance machine; scattering matrix; Fourier analysis; permanent magnet machines; analytical modeling; analytical model; high-speed; sleeve; non-homogeneous permeability; permanent-magnet; analytical model; partial differential equations; separation of variable technique; electrical machines; surface inset permanent magnet; electric machines; permanent magnet motor; rotating machines; hybrid excitation; permanent magnet machines; magnetic equivalent circuits; 3D finite element method; eddy-current losses; experiment; hybrid model; magnetic equivalent circuit; numerical; Maxwell–Fourier method; analytical method; eddy-current; finite-element analysis; loss reduction; permanent-magnet losses; thermal analysis; linear induction motors; complex harmonic modeling; hybrid analytical modeling; 2D steady-state models; multiphase induction machine; reduced order; rotor cage; torque pulsations; eddy-current losses; hybrid model; magnetic equivalent circuit; Maxwell–Fourier method; multi-phase; segmentation; synchronous machines; thermal equivalence circuit; Voronoï tessellation; winding heads; nodal method; thermal resistances; n/a