Reprint
Metal Machini—Recent Advances, Applications and Challenges
Edited by
November 2021
272 pages
- ISBN978-3-0365-2494-8 (Hardback)
- ISBN978-3-0365-2495-5 (PDF)
This is a Reprint of the Special Issue Metal Machining—Recent Advances, Applications and Challenges that was published in
Chemistry & Materials Science
Engineering
Summary
Machining remains one of the most important manufacturing processes in the metalworking industry. Studies on this process have investigated the machinability of different materials, the behaviour of tools, chip formation, surface integrity, forces involved, and its economic and environmental sustainability. New materials are constantly being developed, and machining research needs to closely follow these developments. This book examines recent research in the machining field, covering several aspects and presenting very interesting developments in this area of knowledge.
Format
- Hardback
License and Copyright
© 2022 by the authors; CC BY-NC-ND license
Keywords
magnesium alloy; UNS M11917; AZ91D; hole repair; surface roughness; dry drilling; re-drilling; thin plates; thin-wall; machining; aluminium; cutting forces; roughness; dry; carbide tool; Haynes 282; finishing turning; UNS A97075; dry turning; surface integrity; straightness; parallelism; roundness; concentricity; circular run-out; total run-out; cylindricity; tool edge preparation; segmented chip; machining simulation; burr; optimization; machining; turning process; turning tools; solid tools; cemented carbide; coated tools; coated cemented carbide; Physical Vapor Deposition (PVD); Chemical Vapor Deposition (CVD); multilayered coatings; nanolayered coatings; wear mechanism; tool life; minimum quantity Lubricant (MQL); cutting forces; cutting energy; tool damage; machining; liquid nitrogen; carbon dioxide snow; vibrations; part quality; flexible vacuum fixture; AA2024 floor milling; chip segmentation; damage modeling; dynamic strain aging; stainless steel; Ca treatment; machinability; turning; chip breakability; weight distribution; non-metallic inclusions; AWJM (abrasive water jet machining); CFRTP (carbon fiber-reinforced thermoplastics); hybrid structure; surface quality; Ra; Rz; C/TPU (carbon/thermoplastic polyurethane); machining; milling; turning; tool coating; TiAlN; TiAlN-based coatings; multilayer; nanolayer; wear mechanisms; n/a