Reprint

Advances in Lubricated Bearings

Edited by
January 2023
224 pages
  • ISBN978-3-0365-6289-6 (Hardback)
  • ISBN978-3-0365-6290-2 (PDF)

This is a Reprint of the Special Issue Advances in Lubricated Bearings that was published in

Chemistry & Materials Science
Engineering
Summary

This reprint features 12 research articles that contribute to the research on lubricated bearings. The articles focus on the latest steps in understanding bearing operating behavior, its interaction with lubricants, and its role as a component in the drive train.

In addition to the description of novel modeling approaches, a variety of experimental data are presented to provide interesting identification results as well as validation data for the research and engineering community.

Format
  • Hardback
License and Copyright
© 2022 by the authors; CC BY-NC-ND license
Keywords
journal bearing; rotor stability; floating ring bearing; lobe bearing; wave bearing; lemon bearing; Hopf bifurcation; sliding bearings; tilting pad journal bearings; flow transition; laminar flow; turbulent flow; non-laminar regime; temperature reduction; load capacity increase; tilting-pad journal bearing; pad deformation; heat transfer; trailing edge groove; CFD; power loss; run-up simulation; semi-floating ring bearing; thrust bearing; two-phase flow cavitation; oil-whirl and oil-whip; aerostatic bearings; compensation; infinite stiffness; diaphragm valve; design; acoustic; computational fluid dynamics (CFD); lubrication; roughness; planet gear bearing; journal bearing; misalignment; mixed friction; wear; wind turbine gearbox; planet gear bearing; journal bearing; structure deformation; mixed friction; wear; wind turbine gearbox; metal-polymer plain bearings; PA6-based polyamide composites; dispersed glass and carbon fibers; temperature; Young’s modulus; maximum contact pressures and resource; boundary and dry friction; lithium grease; graphene; load-carrying capacity; wear scar; infrared thermography; vibration analysis; damping ratio; wettability; lubrification; oleophilicity; hydrophobicity; laser surface texturing; tilting-pad journal bearing; experimental investigation; power loss; lubrication method; flooded bearing design; non-flooded bearing design; spray-bar; leading edge groove; n/a