Reprint
Heat Transfer in Energy Conversion Systems
Edited by
July 2021
254 pages
- ISBN978-3-0365-0750-7 (Hardback)
- ISBN978-3-0365-0751-4 (PDF)
This is a Reprint of the Special Issue Heat Transfer in Energy Conversion Systems that was published in
Chemistry & Materials Science
Engineering
Environmental & Earth Sciences
Physical Sciences
Summary
In recent years, the scientific community’s interest towards efficient energy conversion systems has significantly increased. One of the reasons is certainly related to the change in the temperature of the planet, which appears to have increased by 0.76 °C with respect to pre-industrial levels, according to the Intergovernmental Panel on Climate Change (IPCC), and this trend has not yet been stopped. The European Union considers it vital to prevent global warming from exceeding 2 °C with respect to pre-industrial levels, since this phenomenon has been proven to result in irreversible and potentially catastrophic changes. These climate changes are mainly caused by the emissions of greenhouse gasses related to human activities, and can be drastically reduced by employing energy systems, for both heating and cooling of buildings and for power production, characterized by high efficiency levels and/or based on renewable energy sources. This Special Issue, published in the journal Energies, includes 12 contributions from across the world, including a wide range of applications, such as HT-PEMFC, district heating systems, a thermoelectric generator for industrial waste, artificial ground freezing, nanofluids, and others.
Format
- Hardback
License and Copyright
© 2022 by the authors; CC BY-NC-ND license
Keywords
Thermosyphon; start-up characteristics; hydrophilic and hydrophobic; contact angle; numerical modeling; heat transfer; artificial ground freezing; underground station; metro in Napoli; GEO heating; microwave heating; microfluidics; silicon; chip integration; industrial waste heat recovery; thermoelectric generator; hexagonal heat exchanger; temperature distribution; output performance; combustor; turbulent Prandtl approaches; Navier–Stokes simulation; thermal analysis; axial permanent magnet coupling (APMC); eddy current; finite element method (FEM); lumped-parameter thermal network (LPTN); energy efficiency; induction heating; resistance heating; turnouts; railway; safety of rail traffic; stock-rail; switch-rail; nanofluid; heat transfer; entropy generation; viscous dissipation; magnetic heating; high temperature proton exchange membrane fuel cell; thermal management; organic rankine cycle; plate heat exchanger; waste heat recovery; cooling system; thermodynamic modeling; shielded metal arc welding; welding spatter; electrode; electrical power; welding time; drying; energy analysis; exergy analysis; multiphase model; multispecies model; thermodynamics; Baltic Sea Region; district heating; DH network; smart asset management; smart grid