Reprint

Behavior of Metallic and Composite Structures (Second Volume)

Edited by
September 2021
344 pages
  • ISBN978-3-0365-1492-5 (Hardback)
  • ISBN978-3-0365-1491-8 (PDF)

This book is a reprint of the Special Issue Behavior of Metallic and Composite Structures (Second Volume) that was published in

Chemistry & Materials Science
Engineering
Physical Sciences
Summary
Various types of metallic and composite structures are used in modern engineering practice. For aerospace, car industry, and civil engineering applications, the most important are thin-walled structures made of different types of metallic alloys, fibrous composites, laminates, and multifunctional materials with a more complicated geometry of reinforcement including nanoparticles or nanofibres. The current applications in modern engineering require analysis of structures of various properties, shapes, and sizes (e.g., aircraft wings) including structural hybrid joints, subjected to different types of loadings, including quasi-static, dynamic, cyclic, thermal, impact, penetration, etc. The advanced metallic and composite structures should satisfy multiple structural functions during operating conditions. Structural functions include mechanical properties such as strength, stiffness, damage resistance, fracture toughness, and damping. Non-structural functions include electrical and thermal conductivities, sensing, actuation, energy harvesting, self-healing capability, electromagnetic shielding, etc. The aim of this SI is to understand the basic principles of damage growth and fracture processes in advanced metallic and composite structures that also include structural joints. Presently, it is widely recognized that important macroscopic properties, such as macroscopic stiffness and strength, are governed by processes that occur at one to several scales below the level of observation. A thorough understanding of how these processes influence the reduction of stiffness and strength forms the key to the design of improved innovative structural elements and the analysis of existing ones.
Format
  • Hardback
License and Copyright
© 2022 by the authors; CC BY-NC-ND license
Keywords
steel–concrete composite bridge; I-shaped beam; concrete creep; temperature; prediction; experiment; through-beam joint; concrete filled steel tube (CFST) columns; reinforced concrete (RC); axial compressive behaviour; steel mesh; local compression; confined concrete; height factor; curved steel–concrete composite box beam; two-node finite beam element with 26 DOFs; long-term behavior; age-adjusted effective modulus method; C-section; TH-section; distortional mode; medium length; interactive buckling; compression; Koiter’s theory; FEM; dynamic pulse buckling; composite stanchion; FE analysis; nonlinear analysis; crashworthiness; modulus of elasticity; pine wood; wood defects; knots; laboratory tests; beams; glued laminated timber; modulus of elasticity; pine wood; laboratory tests; ceramic-matrix composites (CMCs); minicomposite; tensile; damage; fracture; timber; natural composite; Kolsky method; deformation diagrams; wood species; energy absorption; wood model; verification; nonlinear stability; square plate; shear forces; components of transverse forces in bending; membrane components of transverse forces; 4 methods (CPT, FSDT, S-FSDT, FEM); connection; timber; test; bolt; steel plate; moisture content; failure; AlCrN; arc current; structure; hardness; adhesion; wear; turbine jet engine; material tests; ember-resistant alloys; wood; cohesive law; digital image correlation; fracture mechanics; mixed mode I+II loading; dual adhesive; single lap joints; numerical modeling; artificial neural networks; sandwich panels with corrugated channel core; 3D-printed sandwich; bending response; mechanism maps; geometrical optimization; dislocation–boundary interaction; dislocation–interface interaction; deformation twin-boundary interaction; size effect; boundary structure; boundary strengthening; characterization techniques; adhesive joint; adhesive bond strength; adhesive layer thickness