Reprint
Microstructure Engineering of Metals and Alloys
Edited by
February 2024
200 pages
- ISBN978-3-7258-0204-3 (Hardback)
- ISBN978-3-7258-0203-6 (PDF)
This book is a reprint of the Special Issue Microstructure Engineering of Metals and Alloys that was published in
Chemistry & Materials Science
Engineering
Physical Sciences
Summary
This reprint is a collection of original research papers that cover recent developments in the field of microstructure engineering of metals and alloys. Microstructure and its engineering are of high scientific and industrial interest since it is among the major factors that affect the properties and performance of metals and alloys. This reprint covers studies on microstructure effects on ferrous and non-ferrous alloys.
Format
- Hardback
License and Copyright
© 2022 by the authors; CC BY-NC-ND license
Keywords
HR3C steel; microstructure; creep rupture; precipitates; severe plastic deformation; stainless steel; thermomechanical treatment; microstructure; mechanical properties; Al-Si-Mg alloy; pre-refinement; grain refinement; microstructure; mechanical properties; aluminum alloys; metal matrix composites; graphene; mechanical properties; metalcasting; strengthening mechanisms; medium Mn steel; partial recrystallization; retained austenite; partitioning; warm deformation; inclusion; size distribution; population density function; extreme value theory; fiber laser welding; microstructure; residual stress; epitaxial growth; fractography; EBSD analysis; 3D integration; Cu-to-Cu bonding; low pressure; compensate height difference; electrical steel; shear-slitting; sheared edge; magnetic properties; optimization; forging in open die; ductile cast iron; ultimate plasticity; analysis of the stress–strain state of the material; microstructural studies; CMSX-4; superalloy membranes; creep test; directional coarsening; premix membrane emulsification; AZ91 alloys; grain refinement; melt superheating; rapid solidification; Al-Mn particles