Search Results (14)

Sugar Belle^® mandarin is considered tolerant to Huanglongbing (HLB); however, recent reports have raised concerns about its fruit quality, noting issues such as reduced fruit size, thin peel, poor coloration, decreased firmness, and suboptimal juice quality. Two-year field experiments were conducted to improve external and internal fruit characteristics through foliar application of potassium (K) in five-year-old Sugar Belle mandarin grown in Florida sandy soil. The experiment consisted of foliar K supply (17 kg/ha) via Potassium Nitrate (PN, 4.7 kg/ha N), Dipotassium Phosphate (DKP, 12.7 kg/ha P₂O₅), PN with boron (PNB, 0.84 kg/ha B) at different application times (May, July, September), including one-time Gibberellic acid spray (GA@10 mg/L) and control treatments. PN application during July (PN_J) or two applications of PN with B during May and July (PNB_MJ) resulted in a larger fruit size (>65 mm). Results showed that PN application before fall (May or July) resulted in a significantly thicker peel (2.3 mm), 1.15 fold more than the control and GA treatment. Fruit puncture resistance force was significantly higher (33.1 N) with GA treatment (p = 0.07), followed by PNB_MJ (32.6 N). Meanwhile, K spray positively influenced juice qualities and peel color, regardless of application time or source. However, GA treatment significantly reduced juice quality and peel color. These findings highlighted the benefits of foliar K supply as PN to improve fruit qualities in HLB-affected citrus grown in sandy soil. Full article

Raman spectroscopy is a powerful technique for surface molecular analysis due to its ability to provide molecular fingerprint information. However, its application to subsurface analytes is limited by destructive or invasive methods that compromise the detection accuracy. To address this, we introduce a non-uniform microlens array based on the photonic nanojet (PNJ) principle to realize subsurface remote Raman sensing. Using finite element simulations, the microlens design was optimized with a central lens radius of 5 μm and side lenses of half this radius, achieving a 52% increase in the focal length and a subwavelength spatial resolution compared to a single microlens. The non-uniform design also enhanced the Raman intensity by 85%, enabling sensitive detection of the subsurface analytes. The design’s versatility was validated with a rectangular microlens array, which showed similar improvements. Fabrication using 3D printing produced experimental results closely aligned with those of simulations, with focal length deviations of less than 9% at 1550 nm. These findings demonstrate that non-uniform microlens arrays are scalable, non-invasive, and effective tools for Raman spectroscopy, offering potential applications in biomedicine, materials science, and environmental monitoring, advancing the capabilities of subsurface sensing technologies. Full article

Inspired by metasurfaces’ control over light fields, this study created a liquid microlens coated with a layer of Au@TiO₂, Core-Shell nanospheres. Utilizing the surface plasmon resonance (SPR) effect of Au@TiO₂, Core-Shell nanospheres, and the formation of photonic nanojets (PNJs), this study aimed to extend the imaging system’s cutoff frequency, improve microlens focusing, enhance the capture capability of evanescent waves, and utilize nanospheres to improve the conversion of evanescent waves into propagating waves, thus boosting the liquid microlens’s super-resolution capabilities. The finite difference time domain (FDTD) method analyzed the impact of parameters including nanosphere size, microlens sample contact width, and droplet’s initial contact angle on super-resolution imaging. The results indicate that the full width at half maximum (FWHM) of the field distribution produced by the uncoated microlens is 1.083 times that of the field distribution produced by the Au@TiO₂, Core-Shell nanospheres coated microlens. As the nanosphere radius, droplet contact angle, and droplet base diameter increased, the microlens’s light intensity correspondingly increased. These findings confirm that metasurface coating enhances the super-resolution capabilities of the microlens. Full article

We propose a novel micro-nano structure that can realize a photonic nanojet (PNJ) switch by adjusting the temperature, which is composed of a truncated cylinder coated with a thin vanadium dioxide (VO₂) film. The influence of temperature on the maximum strength, full width at half maximum (FWHM), working distance, and focal length of the PNJ were studied by finite-difference time-domain (FDTD) method. The results demonstrate that the structure can adjust the open and close state of the PNJ by changing the temperature. A PNJ with varying characteristics can be obtained at both high and low temperatures, and the maximum intensity ratio of the PNJ can reach up to 7.25. This discovery provides a new way of optical manipulation, sensing and detection, microscopy imaging, optoelectronic devices, and other fields. Full article

We present a microsphere-based microsensor that can measure the vibrations of the miniature motor shaft (MMS) in a small space. The microsensor is composed of a stretched fiber and a microsphere with a diameter of 5 μm. When a light source is incident on the microsphere surface, the microsphere induces the phenomenon of photonic nanojet (PNJ), which causes light to pass through the front. The PNJ’s full width at half maximum is narrow, surpassing the diffraction limit, enables precise focusing on the MMS surface, and enhances the scattered or reflected light emitted from the MMS surface. With two of the proposed microsensors, the axial and radial vibration of the MMS are measured simultaneously. The performance of the microsensor has been calibrated with a standard vibration source, demonstrating measurement errors of less than 1.5%. The microsensor is expected to be used in a confined space for the vibration measurement of miniature motors in industry. Full article

Due to their narrow beam waist size, high intensity, and long propagation distance, photonic nanojets (PNJs) can be used in various fields such as nanoparticle sensing, optical subwavelength detection, and optical data storage. In this paper, we report a strategy to realize an SPP-PNJ by exciting a surface plasmon polariton (SPP) on a gold-film dielectric microdisk. In detail, an SPP is excited by the grating–coupling method, then it irradiates the dielectric microdisk to form an SPP-PNJ. The characteristics of the SPP-PNJ, including maximum intensity, full width at half maximum (FWHM), and propagation distance, are studied by using finite difference time domain (FDTD) numerical solutions. The results demonstrate that the proposed structure can produce a high-quality SPP-PNJ, the maximum quality factor of which is 62.20, and the propagation distance of the SPP-PNJ is 3.08 λ. Furthermore, the properties of the SPP-PNJ can be modified flexibly by changing the thickness and refractive index of the dielectric microdisk. Full article

Experimental limitations such as design complexity and low optical throughput have prevented photonic nanojet (PNJ) and photonic hook (PH) measurements from demonstrating and characterizing the implementation of narrow intense electromagnetic beams generated from dielectric microelements with circular symmetry. Near-fields optical microscopy can mitigate these limitations and still present a capability of detecting a highly localized electromagnetic beam for applications in step-index media. Here we model a localized PNJ and PH formation in step-index media. We show that despite negligible refractive index contrast between the water ($n_{water}=1.33$) and silica microcylinder (∼1.1), a formation of PNJ and PH is observed with equivalent performance compared to that of silica microcylinder embedded in air ($n_{air}=1$). This model features a practical fiber source and silica microcylinder as an auxiliary structure. Simultaneously, we performed experimental characterization of a photonic nanojet generated from an optical fiber and studied the resulting near-fields. Our electromagnetic simulation results are in good agreement with the experimental ones, demonstrating a full width at half maximum (FHWM) with a relative error of 0.64%. This system will make fiber-based nanojet realization and characterization accessible and practical for optics and laser engineering applications, super-resolution imaging, and nanolithography. Full article

Photonic nanojet (PNJ) is a tightly focused diffractionless travelling beam generated by dielectric microparticles. The location of the PNJ depends on the refractive index of the material and it usually recedes to the interior of the microparticle when the refractive index is higher than 2, making high index materials unsuitable to produce useful PNJs while high index favours narrower PNJs. Here we demonstrate a design of CMOS compatible high index on-chip photonic nanojet based on silicon. The proposed design consists of a silicon hemisphere on a silicon substrate. The PNJs generated can be tuned by changing the radius and sphericity of the hemisphere. Oblate spheroids generate PNJs further away from the refracting surface and the PNJ length exceeds $17\lambda$ when the sphericity of the spheroid is 2.25 The proposed device can have potential applications in focal plane arrays, enhanced Raman spectroscopy, and optofluidic chips. Full article

In this paper, synthetically using refraction, diffraction, and interference effects to achieve free manipulation of the focused optical field, we firstly present a photonic nanojet (PNJ) generated by a micropyramid, which is combined with multilayer thin films. The theory of total internal reflection (TIR) was creatively used to design the base angle of the micropyramid, and the size parameters and material properties of the microstructure were deduced via the expected optical field distribution. The as-designed bilayer micropyramid array was fabricated by using the single-point diamond turning (SPDT) technique, nanoimprint lithography (NIL), and proportional inductively coupled plasma (ICP) etching. After the investigation, the results of optical field measurement were highly consistent with those of the numerical simulation, and they were both within the theoretical calculation range. The bilayer micropyramid array PNJ enhanced the interference effect of incident and scattered fields; thus, the intensity of the focused light field reached 33.8-times that of the initial light, and the range of the focused light field was extended to 10.08$\lambda$. Moreover, the full width at half maximum (FWHM) of the focal spot achieved was 0.6$\lambda$, which was close to the diffraction limit. Full article

As water is normally used as the immersion medium in optically trapped microsphere microscopy, the high-refractive-index barium titanate glass (BTG) microsphere shows a better imaging performance than the low-index polystyrene (PS) or melamine formaldehyde (MF) microsphere, but it is difficult to be trapped by single-beam optical trapping due to its overly high refractive index. In this study, coated BTG microspheres with a PS coating have been computationally explored for the combination of optical trapping with microsphere-assisted microscopy. The PS coating thickness affects both the optical trapping efficiency and photonic nanojet (PNJ) property of the coated BTG sphere. Compared to the uncoated BTG sphere, the coated BTG sphere with a proper PS coating thickness has a highly improved trapping efficiency which enables single-beam optical trapping, and a better PNJ with a higher optical intensity $I_{\max }$ and a narrower full width at half maximum (FWHM) corresponding to better imaging performance. These coated BTG spheres also have an advantage in trapping efficiency and imaging performance over conventional PS and MF spheres. The coated BTG microsphere is highly desirable for optically trapped microsphere super-resolution microscopy and potentially beneficial to other research areas, such as nanoparticle detection. Full article

We numerically investigate the generation of photonic nanojets (PNJs) and the excitation of whispering gallery modes (WGMs) supported by both smooth and corrugated dielectric micro-cylinders under point-source illumination. Results show that the location of the point-source defines the location and properties of PNJs, whereas stability of WGMs exists in smooth micro-cylinders but vanishes in corrugated ones. It is shown that the location of the point-source acts as an additional degree of freedom for controlling the characteristics of the generated PNJs for both smooth and corrugated dielectric micro-cylinders. Furthermore, the influence of the point-source location on the stability of the excited WGMs was diminished for the smooth micro-cylinders, while being fully pronounced for their corrugated counterparts. Full article

Iron-rich pelagic aggregates (iron snow) are hot spots for microbial interactions. Using iron snow isolates, we previously demonstrated that the iron-oxidizer Acidithrix sp. C25 triggers Acidiphilium sp. C61 aggregation by producing the infochemical 2-phenethylamine (PEA). Here, we showed slightly enhanced aggregate formation in the presence of PEA on different Acidiphilium spp. but not other iron-snow microorganisms, including Acidocella sp. C78 and Ferrovum sp. PN-J47. Next, we sequenced the Acidiphilium sp. C61 genome to reconstruct its metabolic potential. Pangenome analyses of Acidiphilium spp. genomes revealed the core genome contained 65 gene clusters associated with aggregation, including autoaggregation, motility, and biofilm formation. Screening the Acidiphilium sp. C61 genome revealed the presence of autotransporter, flagellar, and extracellular polymeric substances (EPS) production genes. RNA-seq analyses of Acidiphilium sp. C61 incubations (+/− 10 µM PEA) indicated genes involved in energy production, respiration, and genetic processing were the most upregulated differentially expressed genes in the presence of PEA. Additionally, genes involved in flagellar basal body synthesis were highly upregulated, whereas the expression pattern of biofilm formation-related genes was inconclusive. Our data shows aggregation is a common trait among Acidiphilium spp. and PEA stimulates the central cellular metabolism, potentially advantageous in aggregates rapidly falling through the water column. Full article

This paper first presents a switchable photonic nanojet (PNJ) generated by a polystyrene (PS) microsphere immersed in nematic liquid crystals (NLCs). The PNJ is switched by applying external voltage, which originates from the refractive index change in the surrounding medium caused by the field-induced realignment of liquid crystal molecules. By tuning the refractive index of NLCs larger or smaller than that of the PS microsphere, the PNJ can be switched off or on. Moreover, we present an optimization study to seek a better electric energy focusing property of the PNJ. Our results reveal that the switchability of PNJ can be optimized by applying a shorter incident wavelength, a double-layer microsphere, and a PS ellipsoid. The full width at half-maximum (FWHM) generated by the PS ellipsoid is narrower than that generated by the microsphere with a shorter incident wavelength. The intensity contrast of the PS ellipsoid is higher than that of the double-layer microsphere. As a whole, the switchability of PNJ can be best optimized by a PS ellipsoid. This should open the way for the development of integrated photonic devices. Full article

A structure based on periodically arranged 3D dielectric cuboids connected by photonic nanojets (PNJs) is proposed with the aim of increasing the propagation distance of surface plasmon polaritons (SPPs) at the telecom wavelength of 1550 nm. The performance of the structure is evaluated and compared with the case without the cuboids demonstrating that the SPPs propagation length is enhanced by a factor greater than 2, reaching a value of approximately 19λ₀, when the gap between the cuboids is 2.5λ₀. Also, the dependence of the propagation length with the height of the cubes is evaluated, showing that this parameter is critical for a good performance of the chain. A subwavelength resolution is obtained for all the jets generated at the output of the cuboids. Full article