Search Results (13)

Intervertebral disk pathology, including disk herniation and degeneration, is a major contributor to chronic low back pain, and when conservative treatment fails, surgical management often involves discectomy-based procedures that leave residual annulus fibrosus (AF) defects associated with reherniation and progressive degeneration. These limitations have motivated interest in regenerative strategies using biomaterial scaffolds; however, reproducing the hierarchical, angle-ply architecture of the AF remains challenging. Here, we present a single-step extrusion-based 3D-printing approach to fabricate polycaprolactone (PCL) scaffolds with aligned microscale surface grooves that promote AF-like organization. Patterned nozzles with circumferential peaks generated uniaxial concave microgrooves (10–17 µm wide) directly during printing, enabling formation of multilamellar angle-ply constructs. Human bone marrow-derived mesenchymal stem cells cultured on patterned scaffolds aligned longitudinally within concave grooves, forming end-to-end arrays that guided extracellular matrix deposition. Gene expression analysis showed that topographical cues governed cellular organization without significantly altering gene expression profiles, while TGF-β3 supplementation upregulated outer AF-associated markers, including COL1, COL12, SFRP2, MKX, MCAM, and SCX. TAGLN expression increased specifically on patterned scaffolds in the absence of TGF-β3, indicating an association between microgroove-guided cellular organization and TAGLN expression, warranting further investigation into potential tension-related mechanisms. This novel single-step extrusion-printing approach leverages custom nozzle geometry to impart concave microgrooves, facilitating scalable fabrication of multilamellar angle-ply scaffolds that induce aligned cellular organization and support potential applications in annulus fibrosus repair, as well as mechanobiological studies of anisotropic musculoskeletal tissues. Full article

Millions of people worldwide suffer from low back pain and disability associated with intervertebral disc (IVD) degeneration. IVD degeneration is highly correlated with aging, as the nucleus pulposus (NP) dehydrates and the annulus fibrosus (AF) fissures form, which often results in intervertebral disc herniation or disc space collapse and related clinical symptoms. Currently available options for treating intervertebral disc degeneration are symptoms control with therapy modalities, and/or medication, and/or surgical resection of the IVD with or without spinal fusion. As such, there is an urgent clinical demand for more effective disease-modifying treatments for this ubiquitous disorder, rather than the current paradigms focused only on symptom control. Hydrogels are unique biomaterials that have a variety of distinctive qualities, including (but not limited to) biocompatibility, highly adjustable mechanical characteristics, and most importantly, the capacity to absorb and retain water in a manner like that of native human nucleus pulposus tissue. In recent years, various hydrogels have been investigated in vitro and in vivo for the repair of intervertebral discs, some of which are ready for clinical testing. In this review, we summarize the latest findings and developments in the application of hydrogel technology for the repair and regeneration of intervertebral discs. Full article

Intervertebral disc (IVD) herniation often causes severe pain and is frequently associated with the degeneration of the IVD. As the IVD degenerates, more fissures with increasing size appear within the outer region of the IVD, the annulus fibrosus (AF), favoring the initiation and progression of IVD herniation. For this reason, we propose an AF repair approach based on methacrylated gellan gum (GG-MA) and silk fibroin. Therefore, coccygeal bovine IVDs were injured using a biopsy puncher (⌀ 2 mm) and then repaired with 2% GG-MA as a filler material and sealed with an embroidered silk yarn fabric. Then, the IVDs were cultured for 14 days either without any load, static loading, or complex dynamic loading. After 14 days of culture, no significant differences were found between the damaged and repaired IVDs, except for a significant decrease in the IVDs’ relative height under dynamic loading. Based on our findings combined with the current literature that focuses on ex vivo AF repair approaches, we conclude that it is likely that the repair approach did not fail but rather insufficient harm was done to the IVD. Full article

Lumbar disc herniation (LDH) is a common condition which can lead to back pain. Although surgical treatments for LDH are well established, complications such as spinal instability and narrowing of adjacent facet joints are still frequently reported. The purpose of this study was to use finite element models to evaluate the stability of the L3–L4 segment after conservative or aggressive percutaneous transforaminal endoscopic discectomy (PTED) with and without an artificial material filler to correct LDH. Compared to the intact model, aggressive PTED reduced the stability of the segment (increased ROM) and narrowed the space between facet joints in the medial/lateral (ML) direction during flexion (maximum 6.7 degrees change in ROM and 90.5% spacing between facet joints), extension (maximum 2.1 degrees and 38.6%), and axial rotation (maximum 4.2 degrees and 90.1%). Aggressive PTED had a similar effect in the anterior/posterior (AP) direction during lateral bending (maximum 2.0 degrees and 44.2%). Augmenting the nucleus pulposus with a polyurethane filler after aggressive PTED improved spinal stability in both the ML and AP directions in all simulated motions, with results similar to the intact model. However, using a hydrogel filler did little to stabilize the spine, likely because the material is too soft to support the heavy, sustained loading. In conclusion, this study found that if an aggressive discectomy is required, augmenting the nucleus pulposus with a PU filler provides sufficient support to stabilize the spine, while hydrogel fillers offer little support. Full article

Lower back pain commonly arises from intervertebral disc (IVD) failure, often caused by deteriorating annulus fibrosus (AF) and/or nucleus pulposus (NP) tissue. High socioeconomic cost, quality of life issues, and unsatisfactory surgical options motivate the rapid development of non-invasive, regenerative repair strategies for lower back pain. This study aims to evaluate the AF regenerative capacity of injectable matrix repair strategy in ex vivo porcine organ culturing using collagen type-I and polycaprolactone nanofibers (PNCOL) with encapsulated fibroblast cells. Upon 14 days organ culturing, the porcine IVDs were assessed using gross optical imaging, magnetic resonance imaging (MRI), histological analysis, and Reverse Transcriptase quantitative PCR (RT-qPCR) to determine the regenerative capabilities of the PNCOL matrix at the AF injury. PNCOL-treated AF defects demonstrated a full recovery with increased gene expressions of AF extracellular matrix markers, including Collagen-I, Aggrecan, Scleraxis, and Tenascin, along with anti-inflammatory markers such as CD206 and IL10. The PNCOL treatment effectively regenerates the AF tissue at the injury site contributing to decreased herniation risk and improved surgical outcomes, thus providing effective non-invasive strategies for treating IVD injuries. Full article

Annulus fibrosus (AF) damage is proven to prompt intervertebral disc (IVD) degeneration, and unrepaired AF lesions after surgical discectomy may boost herniation of the nucleus pulposus (NP) which may lead to further compression of neural structures. Moreover, vascular and neural ingrowth may occur within the defect which is known as a possible reason for discogenic pain. Due to a limited healing capacity, an effective strategy to repair and close the AF defect is necessary. In this study, using electrospinning technology, two nature polymers, silk fibroin and gelatin, were linked to imitate the unique lamellae structure of native AF. Our findings revealed that a multilayer electrospun-aligned fibroin/gelatin scaffold with mechanical and morphological properties mimicking those of native AF lamellae have been developed. The average diameter of the nanofiber is 162.9 ± 38.8 nm. The young’s modulus is around 6.70 MPa with an ultimate tensile strength of around 1.81 MP along preferred orientation. The in vitro test confirmed its biocompatibility and ability to maintain cell viability and colonization. Using a porcine model, we demonstrated that the multilayer-aligned scaffold offered a crucial microenvironment to induce collagen fibrous tissue production within native AF defect. In the implant-repaired AF, H&E staining showed homogeneous fibroblast-like cell infiltration at the repaired defect with very little vascular ingrowth, which was confirmed by magnetic resonance imaging findings. Picrosirius red staining and immunohistochemical staining against type I collagen revealed positively stained fibrous tissue in an aligned pattern within the implant-integrated site. Relative to the intact control group, the disc height index of the serial X-ray decreased significantly in both the injury control and implant group at 4 weeks and 8 weeks (p < 0.05) which indicated this scaffold may not reverse the degenerative process. However, the results of the discography showed that the effectiveness of annulus repair of the implant group is much superior to that of the untreated group. The scaffold, composed with nature fibroin/gelatin polymers, could potentially enhance AF healing that could prevent IVD recurrent herniation, as well as neural and neovascular ingrowth after discectomy surgeries. Full article

Lumbar disc herniation is one of the most common degenerative spinal conditions resulting in lower back pain and sciatica. Surgical treatment options include microdiscectomy, lumbar fusion, total disc replacement, and other minimally invasive approaches. At present, microdiscectomy procedures are the most used technique; however, the annulus fibrosus is left with a defect that without treatment may contribute to high reherniation rates and changes in the biomechanics of the lumbar spine. This paper aims to review current commercially available products that mechanically close the annulus including the AnchorKnot^® suture-passing device and the Barricaid^® annular closure device. Previous studies and reviews have focused mainly on a biomimetic biomaterials approach and have described some mechanical and biological requirements for an active annular repair/regeneration strategy but are still far away from clinical implementation. Therefore, in this paper we aim to create a design specification for a mechanical annular closure strategy by identifying the most important mechanical and biological design parameters, including consideration of material selection, preclinical testing requirements, and requirements for clinical implementation. Full article

Intervertebral disc (IVD) degeneration is a leading cause of low back pain worldwide, incurring a significant burden on the healthcare system and society. IVD degeneration is characterized by an abnormal cell-mediated response leading to the stimulation of different catabolic biomarkers and activation of signalling pathways. In the last few decades, hyaluronic acid (HA), which has been broadly used in tissue-engineering, has popularised due to its anti-inflammatory, analgesic and extracellular matrix enhancing properties. Hence, there is expressed interest in treating the IVD using different HA compositions. An ideal HA-based biomaterial needs to be compatible and supportive of the disc microenvironment in general and inhibit inflammation and downstream cascades leading to the innervation, vascularisation and pain sensation in particular. High molecular weight hyaluronic acid (HMW HA) and HA-based biomaterials used as therapeutic delivery platforms have been trialled in preclinical models and clinical trials. In this paper, we reviewed a series of studies focused on assessing the effect of different compositions of HA as a therapeutic, targeting IVD degeneration. Overall, tremendous advances have been made towards an optimal form of a HA biomaterial to target specific biomarkers associated with IVD degeneration, but further optimization is necessary to address regeneration. Full article

Damage to the annulus fibrosus (AF), the outer region of the intervertebral disc (IVD), results in an undesirable condition that may accelerate IVD degeneration causing low back pain. Despite intense research interest, attempts to regenerate the IVD have failed so far and no effective strategy has translated into a successful clinical outcome. Of particular significance, the failure of strategies to repair the AF has been a major drawback in the regeneration of IVD and nucleus replacement. It is unlikely to secure regenerative mediators (cells, genes, and biomolecules) and artificial nucleus materials after injection with an unsealed AF, as IVD is exposed to significant load and large deformation during daily activities. The AF defects strongly change the mechanical properties of the IVD and activate catabolic routes that are responsible for accelerating IVD degeneration. Therefore, there is a strong need to develop effective therapeutic strategies to prevent or reconstruct AF damage to support operational IVD regenerative strategies and nucleus replacement. By the way of this review, repair and regenerative strategies for AF reconstruction, their current status, challenges ahead, and future outlooks were discussed. Full article

The annulus fibrosus—one of the two tissues comprising the intervertebral disc—is susceptible to injury and disease, leading to chronic pain and rupture. A synthetic, biodegradable material could provide a suitable scaffold that alleviates this pain and supports repair through tissue regeneration. The transfer of properties, particularly biomechanical, from scaffold to new tissue is essential and should occur at the same rate to prevent graft failure post-implantation. This study outlines the effect of hydrolytic degradation on the material properties of a novel blend of polycaprolactone and poly(lactic acid) electrospun nanofibers (50:50) over a six-month period following storage in phosphate buffered saline solution at 37 °C. As expected, the molecular weight distribution for this blend decreased over the 180-day period. This was in line with significant changes to fiber morphology, which appeared swollen and merged following observation using Scanning Electron Microscopy. Similarly, hydrolysis resulted in considerable remodeling of the scaffolds’ polymer chains as demonstrated by sharp increases in percentage crystallinity and tensile properties becoming stiffer, stronger and more brittle over time. These mechanical data remained within the range reported for human annulus fibrosus tissue and their long-term efficacy further supports this novel blend as a potential scaffold to support tissue regeneration. Full article

The development of non-cellularized composites of chitosan (CHI) hydrogels, filled with cellulose nanofibers (CNFs) of the type nanofibrillated cellulose, was proposed for the repair and regeneration of the intervertebral disc (IVD) annulus fibrosus (AF) tissue. With the achievement of CNF-filled CHI hydrogels, biomaterial-based implants were designed to restore damaged/degenerated discs. The structural, mechanical and biological properties of the developed hydrogel composites were investigated. The neutralization of weakly acidic aqueous CNF/CHI viscous suspensions in NaOH yielded composites of physical hydrogels in which the cellulose nanofibers reinforced the CHI matrix, as investigated by means of microtensile testing under controlled humidity. We assessed the suitability of the achieved biomaterials for intervertebral disc tissue engineering in ex vivo experiments using spine pig models. Cellulose nanofiber-filled chitosan hydrogels can be used as implants in AF tissue defects to restore IVD biomechanics and constitute contention patches against disc nucleus protrusion while serving as support for IVD regeneration. Full article

(1) Background: Intervertebral disc (IVD) repair represents a major challenge. Using functionalised biomaterials such as silk combined with enforced hydrogels might be a promising approach for disc repair. We aimed to test an IVD repair approach by combining a genipin-enhanced fibrin hydrogel with an engineered silk scaffold under complex load, after inducing an injury in a bovine whole organ IVD culture; (2) Methods: Bovine coccygeal IVDs were isolated from ~1-year-old animals within four hours post-mortem. Then, an injury in the annulus fibrosus was induced by a 2 mm biopsy punch. The repair approach consisted of genipin-enhanced fibrin hydrogel that was used to fill up the cavity. To seal the injury, a Good Manufacturing Practise (GMP)-compliant engineered silk fleece-membrane composite was applied and secured by the cross-linked hydrogel. Then, IVDs were exposed to one of three loading conditions: no load, static load and complex load in a two-degree-of-freedom bioreactor for 14 days. Followed by assessing DNA and matrix content, qPCR and histology, the injured discs were compared to an uninjured control IVD that underwent the same loading profiles. In addition, the genipin-enhanced fibrin hydrogel was further investigated with respect to cytotoxicity on human stem cells, annulus fibrosus, and nucleus pulposus cells; (3) Results: The repair was successful as no herniation could be detected for any of the three loading conditions. Disc height was not recovered by the repair DNA and matrix contents were comparable to a healthy, untreated control disc. Genipin resulted being cytotoxic in the in vitro test but did not show adverse effects when used for the organ culture model; (4) Conclusions: The current study indicated that the combination of the two biomaterials, i.e., genipin-enhanced fibrin hydrogel and an engineered silk scaffold, was a promising approach for IVD repair. Furthermore, genipin-enhanced fibrin hydrogel was not suitable for cell cultures; however, it was highly applicable as a filler material. Full article

Chronic low back pain accompanied by intervertebral disk degeneration is a common musculoskeletal disorder. Physical exercise, which is clinically recommended by international guidelines, has proven to be effective for degenerative disc disease (DDD) patients. However, the mechanism underlying the analgesic effects of physical exercise on DDD remains largely unclear. The results of the present study showed that mechanical withdrawal thresholds of bilateral hindpaw were significantly decreased beginning on day three after intradiscal complete Freund’s adjuvant (CFA) injection and daily running exercise remarkably reduced allodynia in the CFA exercise group beginning at day 28 compared to the spontaneous recovery group (controls). The hindpaw withdrawal thresholds of the exercise group returned nearly to baseline at the end of experiment, but severe pain persisted in the control group. Histological examinations performed on day 70 revealed that running exercise restored the degenerative discs and increased the cell densities of the annulus fibrosus (AF) and nucleus pulposus (NP). Furthermore, immunofluorescence labeling revealed significantly higher numbers of 5-bromo-2-deoxyuridine (BrdU)-positive cells in the exercise group on days 28, 42, 56 and 70, which indicated more rapid proliferation compared to the control at the corresponding time points. Taken together, these results suggest that running exercise might alleviate the mechanical allodynia induced by intradiscal CFA injection via disc repair and cell proliferation, which provides new evidence for future clinical use. Full article