Whether chloride resistance is highly influenced by chloride binding capacity remains unknown. In this study, the chloride resistance of Portland cement-based mortar incorporating aluminate cement and calcium carbonate was investigated considering th...
In this paper, the effect of a sodium tripolyphosphate (STPP) addition on the dispersion and hydration of pure calcium aluminate cement (PCAC) was investigated, and the corresponding mechanism of effect was studied. The effects of STPP on the dispers...
Liquid calcium aluminate cement (LCAC) is an innovative material technology with significant potential for varied applications in civil engineering. However, despite its promising results, a significant gap remains in the direct application of LCAC a...
Calcium aluminate cement (CAC) is one of the alternative cements that is widely used for special applications. However, during the hydration process degradation of CAC microstructure, the so-called hydrate conversion process, hexagonal calcium alumin...
The problem of loss of strength caused by the conversion reaction with calcium aluminate cements (CAC) is well known. It has been shown that the addition of ground granulated blast furnace slag (GGBS) to CAC inhibits the conversion process. Different...
The present study concerns a development of calcium aluminate cement (CAC) concrete to enhance the durability against an externally chemically aggressive environment, in particular, chloride-induced corrosion. To evaluate the inhibition effect and co...
Mineral additions can eliminate the conversion in calcium aluminate hydrates and thus inhibit the future strength retraction of calcium aluminate cement (CAC). However, the impacts of these additions on the protection capacity of CAC concrete in rela...
In the context of global energy scarcity, thermal insulation castables have garnered significant attention from the steel industry to reduce energy consumption. To optimize the performance of calcium hexaaluminate (CA6)-based insulating castables, a...
The effects of sodium hexametaphosphate (SHMP) addition on the dispersion and hydration of calcium aluminate cement were investigated, and the relevant mechanisms discussed. The content of SHMP and the adsorption capacity of SHMP on the surface of ce...
One commonly used cement type for thermal applications is CAC containing 38–40% alumina, although the postheated behavior of this cement subjected to elevated temperature has not been studied yet. Here, through extensive experimentation, the postheat...
The effect of colloidal silica (CS) on the hydrate phases and microstructure evolution of calcium aluminate cement (CAC) was investigated. Samples hydrated with CS were obtained and characterized by X-ray diffraction (XRD), Field Emission Scanning El...
This paper discusses the performance of calcium sulpho-aluminate (CSA) cement and a Sulphate-Resisting Portland Cement (SRPC) with a fly ash (FA) additive (i.e., a SRPC + FA binder system) in a ‘live’ sewer environment; it deepens the und...
In this paper, the mechanical and fracture properties of fly ash geopolymer concrete (FAGC) mixed with calcium aluminate cement (CAC) were explored. Fly ash was partially replaced by CAC with 2.5%, 5% and 7.5%. The results exhibit that the mechanical...
Calcium aluminate cement (CAC) has been explored as a sustainable alternative to Portland cement, the most widely used type of cement. However, the hydration reaction and mechanical properties of CAC can be influenced by various factors such as water...
In this paper, we comparitvley studied acetic acid attacks on geopolymer (GP-M), calcium aluminate (CAC-M), and Portland cement (PC-M)-based mortars. Consequent formations of deteriorated or transition layers surrounding the unaltered core material w...
An alkali-activated blend of aluminum cement and class F fly ash is an attractive solution for geothermal wells where cement is exposed to significant thermal shocks and aggressive environments. Set-control additives enable the safe cement placement...
Calcium aluminate cements (CACs) are a group of rapid-hardening hydraulic binders with a higher aluminum composition and lower ecological footprint compared to their ordinary Portland cement (CEM) counterparts. CACs are commonly known to have higher...
In this work, the hydration of calcium aluminate cement (CAC, Al2O3 ≥ 70%) paste with nano admixtures (0, 0.05%, 0.1% and 0.2%) of nano-silica (NS) and carbon nano-cones (NC) when W/CAC = 0.35 was investigated. The methods of calorimetry, thermal...
In this research effect of rice husk ash (RHA), as silicate impurities, on the hydration reaction and mechanical strength of calcium aluminate cement (CAC) concrete, as one of the most important non-Portland cements, was investigated. Furthermore, in...
Supersulfated cement (SSC), a low-carbon, energy-efficient, eco-friendly cementitious material, is mainly made from industrial byproducts. However, SSC’s slow early strength development leads to inadequate initial hardening and reduced durabili...
Concrete wastewater infrastructures are important to modern society but are susceptible to sulfuric acid attack when exposed to an aggressive environment. Fibre-reinforced mortar has been adopted as a promising coating and lining material for degrade...
We investigated the impact of CaCO3 addition on the density and compressive strength of calcium aluminate cement (CAC)-based cementitious materials in binder jetting additive manufacturing (BJAM). To confirm the formation of a uniform powder bed, we...
Colloidal silica-bonded castables offer several advantages compared to traditional calcium aluminate cement (CAC)-bonded castables, including lower torque values during mixing, superior drying properties, and a lower CaO content. Nevertheless, inform...
Calcium aluminate cement (CAC) offers rapid strength development, chemical durability in harsh environments, and high-temperature resistance, but its long-term performance may be compromised by the conversion of metastable hexagonal hydrates into sta...
Tartaric acid (TA) changes short-term mechanical behavior and phase composition of sodium-metasilicate activated calcium-aluminate cement blend with fly ash, type F, when used as a set control additive to allow sufficient pumping time for underground...
This work concerns the hydration mechanism of calcium zirconium aluminate as a ternary compound appearing in the CaO-Al2O3-ZrO2 diagram besides the calcium aluminates commonly used as the main constitutes of calcium aluminate cements (CACs). Moreover...
In the presented study, ye’elimite-aluminate-calcium (YAC) cement was synthesized. Complete synthesis of crystalline phases was achieved at a temperature of 1300 °C, which is 150 °C lower than the temperature standardly used in the proc...
This paper discusses studies regarding the impact of fine-ground glass additives on the hydration and properties of alumina cement pastes and mortars. Fine-ground glass was added to pastes and mortars instead of high-alumina cement and calcium alumin...
This research investigated the retarding impact of zinc oxide (ZnO) and borax (Na2[B4O5(OH)4]·8H2O) on hydration of Portland cement, calcium aluminate cement (CAC), and calcium sulfoaluminate cement (CSA). Heat of hydration of cement paste sam...
The present research compared the behaviours of lightweight mortars based on ordinary Portland cement (OPC), calcium sulphoaluminate cement (CSAC), and calcium aluminate cement (CAC) containing expanded perlite and subjected to elevated temperatures....
High-temperature (HT) geothermal wells can provide green power 24 hours a day, 7 days a week. Under harsh environmental and operational conditions, the long-term durability requirements of such wells require special cementitious composites for well c...
This study investigates the effect of the exsolution behavior of alumina-rich spinel on the formation and distribution of CA6 (CaAl12O19) in corundum castables bonded with calcium aluminate cement. In this study, alumina-rich spinel is substituted fo...
Al2O3-CaO-Cr2O3 castables are used in various furnaces due to excellent corrosion resistance and sufficient early strength, but toxic Cr(VI) generation during service remains a concern. Here, we investigated the relative reactivity of analogous Cr(II...
This paper presents the use of hydrophobic silica aerogel (HSA) and hydrophilic fly ash cenosphere (FCS) aggregates for improvements in the thermal insulating and mechanical properties of 100- and 250 °C-autoclaved calcium aluminate phosphate (Ca...
Across the world, any activity associated with the nuclear fuel cycle such as nuclear facility operation and decommissioning that produces radioactive materials generates ultramodern civilian radioactive waste, which is quite hazardous to human healt...
Municipal solid waste incineration fly ash (MSWI FA) is a hazardous waste that must be kept in special landfills due to the high amounts of chlorides, sulfates, and heavy metals. The granulation of MSWI FA could be used as a solidification/stabilizat...
Aerial additive manufacturing (AAM) represents a paradigm shift in using unmanned aerial vehicles (UAVs, often called ‘drones’) in the construction industry, using self-powered and untethered UAVs to extrude structural cementitious materi...
Cement composites (CC) are among the composites most widely used in the construction industry, such as a durable waterproof and fire-resistant concrete layer, slope protection, and application in retaining wall structures. The use of 3D fabric embedd...
The main objective of this paper was to investigate the heat transfer of modified lightweight refractory concrete at the microscopic scale. In this work, such material was treated as a porous composite based on the compound of calcium aluminate cemen...
This investigation presents a critical analysis of calcium aluminate cements (CAC), specifically associated with sustainability and environmental impact, and the potential of these cements to help solve certain worldwide problems. Areas of research i...
Different wastes are generated in ferromanganese and silicomanganese alloy production. One of them is the ultrafine oxidized dust (UOD) produced in the collection and control of flying dusts in the ferroalloy industry. This waste has fairly high mang...
Using phosphogypsum (PG) as a raw material to prepare calcium sulphoaluminate cement (CAS) is an effective way of treating phosphogypsum. In order to meet the different application requirements of CSA cement and promote the application of CAS cement,...
Calcium sulfoaluminate cement (CSA) is a type of low-CO2 binder which has been widely applied in the production of concrete. To investigate the protection capability offered by CSA to keep steel from corrosion, the pore solution chemistry of CSA on s...
In this study, the effect of fine blast furnace slag powder (SP) and limestone powder (LSP) as a mineral admixture in shotcrete using monocalcium aluminate (CA) as a quick-setting accelerator was evaluated. The shotcrete was prepared with up to 25 wt...
Due to the large increase in human population, the need for more buildings and other amenities is widening. Concrete is considered one of the most abundant and popular materials used in the structure and construction fields. It is known as a composit...
The use of alternative cementitious binders is necessary for producing sustainable concrete. Herein, we study the effect of using alternative cementitious binders in ultra-high-performance concrete (UPHC) by calculating the phase assemblages of UHPC...
The utilization of steel slag (SS), fly ash (FA), and ground granulated blast furnace slag (GGBFS) as soil additives in construction represents a critical approach to achieving resource recycling of these industrial by-products. This study aims to ac...
The use of blast furnace cement is an effective way to meet the requirements of sustainable development. However, CEM III/C is characterized by slow strength gain. The problem can be worse for plasticized reinforced blast furnace cement concretes mix...
The combined effect and corresponding mechanism of nano calcium carbonate (NC) and aluminum sulfate (AS) on the setting and hardening performance of binary blended cement (ordinary Portland cement (OPC) and calcium sulfoaluminate cement (CSA)) were e...
The presented paper aims to describe the influence of accelerating admixtures on the properties and microstructure of cement pastes and mortars. Blended slag cement CEM II/B-S containing two different clinkers (differing amounts of siliceous and alum...
of 3