1,044 Results Found

This work aims to investigate the synergistic effects of hybrid bio-fillers and compatibilizers on the properties of natural rubber composites. Rice husk silica (RSi) and hydroxyapatite (HA), derived from rice husk ash and seabass fish scales, respec...

A series of composites based on epoxy resin filled with additives of natural origin were prepared to investigate the influence of such fillers on the properties of the epoxy compositions. For this purpose, the composites containing 5 and 10 wt.% of a...

Epoxy resins as important organic matrices, thanks to their chemical structure and the possibility of modification, have unique properties, which contribute to the fact that these materials have been used in many composite industries for many years....

In recent years, biodegradable composites have become important in various fields because of the increasing awareness of the global environment. Waste natural polymers have received much attention as renewable, biodegradable, non-toxic and low-cost f...

Currently, up to 215 million metric tons of harvestable straw are available in Europe, 50% of the crops come from wheat, 25% from barley and 25% from maize. More than half of the production remains undeveloped. The overproduction of straw in the worl...

The conducted study was focused on the development of a new type of technical blend reinforced with natural fillers. The study was divided into two parts, where, in the first stage of the research, unmodified POM was reinforced with different types o...

The reported study concerns the introduction of renewable raw materials into the formulation of rigid polyurethane foams in the quest for the sustainable development of polymer composites. In this study, rigid polyurethane foam composites were prepar...

The work presents the results of a comprehensive study on obtaining compositions based on polypropylene and natural fillers modified by enzymatic preparations under high-shear forces. The experiment protocol includes determining the modification time...

Thermally conductive composites were prepared based on epoxidized natural rubber (ENR) filled with alumina, silica, and hybrid alumina and silica. The thermal conductivity and mechanical properties were assessed. It was observed that the interactions...

Natural rubber (NR), an important natural polymer derived from the Hevea brasiliensis tree, has been widely used in the rubber industry owing to its excellent elastic properties. However, it requires reinforcing fillers to improve its mechanical prop...

Carbon–silica dual-phase filler (CSDPF)/natural rubber (NR) vulcanizate was prepared by mechanical blending, followed by a hot-press vulcanization. The dispersion of CSDPF in the NR matrix and the effects of CSDPF on the filler–rubber int...

As the world is facing rapid increases in agricultural wastes that greatly affect global health, the environment, and economies, this work aims to alleviate such issues by introducing simple uses of waste fruit peel powder (FPP) derived from mangoste...

In recent years, plastics recycling has become one of the leading environmental and waste management issues. Along with the main advantage of plastics, which is undoubtedly their long life, the problem of managing their waste has arisen. Recycling is...

The research is focused on the evaluation of mechanical properties of adhesive bonds with a composite layer of adhesive to increase their service life (safety) under cyclic loading of different intensities. Cyclic loading represents a frequent cause...

Polymer composites are widely used modern-day materials, specially designed to combine good mechanical properties and low density, resulting in a high tensile strength-to-weight ratio. However, materials for outdoor use suffer from the negative effec...

The smoke emitted during thermal decomposition of elastomeric composites contains a significant number of carcinogenic and mutagenic compounds from the group of polycyclic aromatic hydrocarbons, PAHs, as well as polychlorinated dibenzo-p-dioxins and...

Increasingly, raw materials of natural origin are used as fillers in polymer composites. Such biocomposites have satisfactory properties. To ensure above-average functional properties, modifications of biofillers with other materials are also used. T...

This present study is focused on exploring the possibility of using agricultural waste in the form of cereal straw as an active filler of biocomposites. The effect of lignocellulosic filler addition on the multifunctional properties of natural rubber...

The aim of this study was to evaluate the influence of mineral and natural additives (2.5; 5; 10 wt.%) on the impact strength of epoxy–basalt composites. Three types of filler were used to modify the epoxy matrix: basalt powder (BP), basalt microfibe...

Ultrafine fully vulcanized powdered natural rubber (UFPNR) has a promising application as a renewable toughening modifier in polymer matrices. In this work, the effects of acrylate coagents, which had different amounts of functional groups, on proper...

This work concerns the effect of fillers and ionic liquids on the cure characteristics of natural rubber (NR) compounds, as well as the mechanical and thermal properties of the vulcanizates. Three types of white filler were applied, such as cellulose...

Two forms of fine-grained isotropic graphite, derived from mixed fillers by the isostatic pressing method, NG (filler with 100% natural graphite flake) and 75N25C-G (mixed filler with 75 wt.% natural graphite flake and 25 wt.% calcined coke) were pre...

The study aimed to prepare sustainable and degradable elastic blends of epoxidized natural rubber (ENR) with poly(lactic acid) (PLA) that were reinforced with flax fiber (FF) and montmorillonite (MMT), simultaneously filling the gap in the literature...

The main aim of this study is to evaluate the possibility of applying foundry dust (FD) derived filler for the preparation of natural rubber (NR) based composites by characterizing the mechanical properties. The as-received FD was processed via a sim...

This article presents the initial test results examining basic technological factors, such as type of modifying agent and seasoning time, which influence properties of adhesive epoxide compositions. The aim of the study was to prepare adhesive compos...

Carbon-neutral policy and technological race on the powder coatings market force to develop more advanced, safer, cheaper, and naturally sourced products. To meet the market needs, powder coating compositions and coatings were prepared from safe and...

Composites based on natural rubber reinforced with mineral (precipitated silica and chalk) and organic (sawdust and hemp) fillers in amount of 50 phr were obtained by peroxide cross-linking in the presence of trimethylolpropane trimethacrylate and ir...

In this study, glass fiber-reinforced polymer (GFRP) rebars were fabricated using epoxy resin matrix filled with 5 wt.% of hemp and bamboo powder fillers, both untreated and dielectric barrier discharge (DBD) plasma treated. The tensile, flexural, tr...

Nowadays, the chemical industry is looking for sustainable chemicals to synthesize nanocomposite bio-based polyurethane foams, PUs, with the aim to replace the conventional petrochemical precursors. Some possibilities to increase the environmental su...

Organoclay nanoparticles (Cloisite® C10A, Cloisite® C15) and their combination with carbon black (N330) were studied as fillers in chloroprene/natural/butadiene rubber blends to prepare nanocomposites. The effect of filler type and load on the physic...

As biodegradable thermoplastics are more and more penetrating the market of filaments for fused deposition modeling (FDM) 3D printing, fillers in the form of natural fibers are convenient: They have the clear advantage of reducing cost, yet retaining...

This study evaluates the effect of CaCO3 fillers extracted from waste eggshells on 3D-printed PLA performance. Samples of neat PLA and PLA reinforced with CaCO3 fillers embedded with different wt.% were prepared using an FDM (fused deposition modelin...

Natural rubber with 50 mol % epoxidation (ENR-50) was filled with carbon nanotubes (CNTs) and conductive carbon black (CCB) hybrid fillers with various CCB loadings of 2.5, 5.0, 7.0, 10.0 and 15.0 phr, and the compounds were mixed with ferric ion (Fe...

Environmental concerns and cost reduction have encouraged the use of natural fillers as reinforcement in polymer composites. Currently, a wide variety of reinforcement, such as natural fibers and nanocellulose, are used for this purpose. Composite ma...

Superglassy polymers have emerged as potential membrane materials for several gas separation applications, including acid gas removal from natural gas. Despite the superior performance shown at laboratory scale, their use at industrial scale is hampe...

The objective of this study was to investigate the influence of the lignocellulose filler originating in wood and non-wood raw materials, alone or together with collagen hydrolysate, on the properties and biodegradation ability of natural rubber late...

The performance of natural rubber (NR), a naturally occurring and sustainable material, can be greatly enhanced by adding different fillers to the NR matrix. The homogeneous dispersion of fillers in the NR matrix is a key factor in their ability to r...

The prediction of pause fillers plays a crucial role in enhancing the naturalness of synthesized speech. In recent years, neural networks, including LSTM, BERT, and XLNet, have been employed for pause fillers prediction modules. However, these method...

Moisture is one of the critical failures affecting asphalt pavement. It has been recently found that moisture created by rainwater and undrained water deteriorate the bonding interface between asphalt mastic and aggregate. Using different mineral fil...

This study investigated the development of biocomposites for use as packaging and film in everyday applications. The utilization of rice flour (RF) as a cheap natural filler in the production of polybutylene succinate (PBS) biocomposites has been sho...

The aim of this research was to evaluate the effect of untreated and 5% aqueous NaOH solution-treated filler of the plant Jatropha Curcas L. on the mechanical properties of adhesive bonds, especially in terms of their service life at different amplit...

Biopolymers from renewable materials are promising alternatives to the traditional petroleum-based plastics used today, although they face limitations in terms of performance and processability. Natural fillers have been identified as a strategic rou...

In the last few decades, the interest towards natural compounds, coming from a natural source and biodegradable, for biopolymers is always increasing because of a public request for the formulation of safe, eco-friendly, and sustainable materials. Th...

Medical gloves, along with masks and gowns, serve as the initial line of defense against potentially infectious microorganisms and hazardous substances in the health sector. During the COVID-19 pandemic, medical gloves played a significant role, as t...

The study explores the novel use of oak bark (Quercus cortex) as a bio-filler in elastomeric composites, aligning with the global trend of plant-based biocomposites. Both modified and unmodified oak bark were investigated for their impact on the phys...

Currently composites play an important role in all aspects of engineering and technology, with constantly growing applications. Recently, more attention was focused on natural fillers due to their suitability as reinforcement materials in thermo-plas...

The application of wastes as a filler/reinforcement phase in polymers is a new strategy to modify the performance properties and reduce the price of biocomposites. The use of these fillers, coming from agricultural waste (cellulose/lignocellulose-bas...

In this study, peppermint (Mentha piperita L.), German chamomile (Matricaria chamomilla L.) and yarrow (Achillea millefolium L.) were applied as natural fibrous fillers to create biocomposites containing substances of plant origin. The purpose of the...

When designing products that are made of composite materials and that contain natural fillers, it is particularly important to consider the long-term exposure of these materials to caustic liquids and substances (concentrated acids, bases), and to en...

In the current context of green mobility and sustainability, the use of new generation natural fillers, namely, α-cellulose, has gained significant recognition. The presence of hydroxyl groups on α-cellulose has generated immense eagernes...