204 Results Found

Developing novel functional materials to advance the technological level of clean and renewable energy systems is the focus of much research. Due to their outstanding operational and compositional properties, perovskite-based structures have already...

A novel hybrid system model, combining a concentrated photovoltaic cell (CPC) with a thermally regenerative electrochemical cycle (TREC), is proposed. This innovative setup allows the TREC to convert heat from the CPC into electricity. The model inco...

This article analyzes the path towards achieving electric energy independence for dormitories. It examines electricity consumption in dormitories to determine the necessary volume for daily electrochemical energy storage systems, seasonal hydrogen st...

New donor–acceptor conjugated alternating or random copolymers containing 1-methyl-2-phenylbenzimidazole and benzothiadiazole (P1), diketopyrrolopyrrole (P4), or both acceptors (P2) are reported. The specific feature of these copolymers is the...

In this study, for the first time, the production of green hydrogen gas (H2) in the cathodic compartment, in concomitance with the electrochemical oxidation (EO) of an aqueous solution containing Calcon dye at the anodic compartment, was studied in a...

Great consideration is placed on the choice of capping agents’ base on the proposed application, in order to cater to the particular surface, size, geometry, and functional group. Change in any of the above can influence the characteristics pro...

Kesterite Cu2ZnSnS4 (CZTS) thin films using various 1,8-diiodooctane (DIO) polymer additive concentrations were fabricated by the electrochemical deposition method. The optical, electrical, morphological, and structural properties of the CZTS thin fi...

In this study, poly(3,3-dibenzyl-3,4-dihydro-2H-thieno[3,4-b][1,4]dioxepine)/platinum composite films (PProDOT-Bz2/Pt) were used as counter electrodes (CEs) in dye-sensitized solar cells (DSSCs). The composite films were prepared on fluorine-doped ti...

In this work, four donor–acceptor copolymers, PFDTBTDI-DMO, PFDTBTDI-8, PDBSDTBTDI-DMO, and PDBSDTBTDI-8, based on alternating 2,7-fluorene or 2,7-dibenzosilole flanked by thienyl units, as electron-donor moieties and benzothiadiazole dicarboxy...

Single-walled carbon nanotubes (SWCNTs), which possess electrical and thermal conductivity, mechanical strength, and flexibility, and are ultra-light weight, are an outstanding material for applications in nanoelectronics, photovoltaics, thermoelectr...

The impedance response of an electrochemical cell able to convert sunlight into electrical power is analyzed and discussed. Light conversion is due to a photosynthetic system known as reaction center, which is the core of photosynthesis in several li...

Potential-induced degradation (PID) presents a critical reliability issue for solar photovoltaic (PV) modules, with three primary types identified in the literature, namely, PIDs (shunting type), PIDp (polarization type), and PIDc (corrosion type). E...

The blocking layer is crucial for inhibiting recombination processes in photovoltaics that utilize oxide semiconductors, such as dye-sensitized solar cells (DSSCs), quantum-dot-sensitized solar cells (QDSSCs), and perovskite solar cells. However, its...

The electron diffusion length (Ln) is smaller than the hole diffusion length (Lp) in many halide perovskite semiconductors meaning that the use of ordered one-dimensional (1D) structures such as nanowires (NWs) and nanotubes (NTs) as electron transpo...

Dye-sensitized solar cells (DSSCs) have attracted a substantial interest in the last 30 years for the conversion of solar power to electricity. An important component is the redox mediator effecting the transport of charge between the photoelectrode...

In recent years, the development of suitable technologies for the remediation of environmental contaminations has attracted considerable attention. Among these, electrochemical approaches have gained prominence thanks to the many possible application...

This study is aimed at a succinct review of practical impacts of grid integration of renewable energy systems on effectiveness of power networks, as well as often employed state-of-the-art solution strategies. The renewable energy resources focused o...

Within the realm of renewable energy sources, biological-based power systems have emerged as pivotal players particularly suited for low- and ultra-low-power applications. Unlike microbial fuel cells (MFCs), which invariably rely on external carbon f...

In this work, a series of eight thiophene-based polymers (exploited as “donors” in bulk heterojunction photovoltaics cells), whose structures were designed to be suitably tuned with the electronic characteristics of the [6,6]-Phenyl C61 butyric acid...

Iron pyrite is a cheap, stable, non-toxic, and earth-abundant material that has great potential in the field of photovoltaics. Electrochemical deposition is a low-cost method, which is also suitable for large-scale preparation of iron pyrite solar ce...

The paper presents synthesis and characterization of nine new thiazolyl-(phenyldiazenyl)-2H-chromen-2-one dyes. The impact of substituent structure in thiazole ring in the synthesized azocoumarin derivatives on electrochemical properties, photoisomer...

Zinc cobaltite (ZnCo2O4) is a ternary metal oxide found in spinel with promising properties for various applications. Optimizing its catalytic activity requires an understanding of its electrochemical behavior. The electrochemical properties of ZnCo2...

The development of dye-sensitized solar cells (DSSCs) has gained prominence as an economical alternative for photovoltaic energy conversion. This work investigates the synthesis of niobium pentoxide (Nb2O5) by the Pechini method, followed by calcinat...

Producing chemical fuels from sunlight is a sustainable way to utilize solar energy and reduce carbon emissions. Within the current photovoltaic-electrolysis or photoelectrochemical-based solar fuel generation system, electrochemical CO2 reduction is...

The Special Issue entitled “Organic/Metal Oxide Thin Films for Optoelectronic/Photovoltaic and Sensing Applications” is comprised of thirteen original research articles devoted to the development and designing of new and novel organic/met...

Wastewater treatment plants and power generation constitute inseparable parts of present society. So the growth of wastewater treatment plants is accompanied by an increase in the energy consumption, and a sustainable development implies the use of r...

The performance of bio-photovoltaic devices with a monolayer of the immobilized photosynthetic reaction center (RC) is generally low because of weak light absorption and poor charge transfer between the RC and the electrode. In this paper, a new bio-...

In this work, a new photovoltaic device was prepared. The device uses titanium (Ti) foil/TiO2 nanotubes as the photoanode and multi-walled carbon nanotubes (MWCNTs) as a photosensitizer. Titanium dioxide nanotube arrays (TiO2-NTs) were prepared by on...

MoS2, a key material for supercapacitors, batteries, photovoltaics, catalysis, and sensing applications, was synthesized using the hydrothermal method. Different precursors such as molybdenum sources (ammonium heptamolybdate tetrahydrate ((NH4)6Mo7O2...

Dye-sensitized solar cells (DSSCs) have become a validated and economically credible competitor to the traditional solid-state junction photovoltaic devices. DSSCs based on biopolymer gel electrolyte systems offer the perspective of competitive conve...

This review aimed to summarize the current knowledge regarding dibenzofulvene derivatives (DBF) investigated for photovoltaics and organic electronics applications. The work begins with a detailed analysis of the synthesis and modification methods fo...

The photovoltaic effect in the anodic formation of silicon dioxide (SiO2) on porous silicon (PS) surfaces was investigated toward developing a potential passivation technique to achieve high efficiency nanostructured Si solar cells. The PS layers wer...

Perovskite solar cells have emerged as one of the most promising photovoltaic technologies for future clean energy sources to replace fossil fuels. Among the various components in a perovskite solar cell, the hole-transporting materials play signific...

Polypyrroles attract significant attention as the promising class of conductive polymers for the organic electronics, electrochemical energy-storage, photovoltaics, sensing and light-emitting devices due to their electrochemical and electrical proper...

The current state of thin film heterojunction solar cells based on cuprous oxide (Cu2O), cupric oxide (CuO) and copper (III) oxide (Cu4O3) is reviewed. These p-type semiconducting oxides prepared by Cu oxidation, sputtering or electrochemical deposit...

This work is concerned with the use of the engine start module (ESM) ULTRA 31/900/24V ultracapacitor in specific hybrid systems consisting of a photovoltaic (PV) module, battery, and internal combustion engine (ICE). The test bench research on the ES...

A series of novel double-anchoring dyes for phenoxazine-based organic dyes with two 2-cyanoacetic acid acceptors/anchors, and the inclusion of a 2-ethylhexyl chain at the nitrogen atom of the phenoxazine that is connected with furan, thiophene, and 3...

Three novel pyrazine-based organic photosensitizers denoted as TPP, TPPS, and TPPF were synthesized for dye-sensitized solar cell (DSSC) studies. Chemical structures of the pyrazine-based photosensitizers were designed with pyrazine derivatives as ac...

Over the past decades, the application of new hybrid materials in energy storage systems has seen significant development. The efforts have been made to improve electrochemical performance, cyclic stability, and cell life. To achieve this, attempts h...

The conversion from existing electrical networks into an all-renewable and environmentally friendly electrification scenario is insufficient to produce and distribute energy efficiently. Electrochemical devices’ premature degradation as a whole cause...

New organic dyes comprising carbazole, iminodibenzyl, or phenothiazine moieties, respectively, as the electron donors, and cyanoacetic acid or acrylic acid moieties as the electron acceptors/anchoring groups were synthesized and characterized. The in...

In this work, nanostructured TiO2 and poly-3,4-ethylenedioxythiophene (PEDOT) layers were electrochemically prepared over transparent electrodes. Morphological characterization evidenced the presence of nanostructures as planed with 50-nm-wide TiO2 r...

Si/PEDOT: PSS solar cell is an optional photovoltaic device owing to its promising high photovoltaic conversion efficiency (PCE) and economic manufacture process. In this work, dopamine@graphene was firstly introduced between the silicon substrate an...

A properly designed and manufactured autonomous lighting system has an impact on reducing the amount of conflicts between pedestrians and drivers. For pedestrian crossings located outside of urban areas, one of the utilized solutions is PV installati...

A lot of autonomous power systems have been designed and operated with different power levels and with special requirements for climatic conditions, availability, operation/maintenance cost, fuel consumption, environmental impacts, etc. In this paper...

Conductive polymers are nowadays attracting great attention for their peculiar mechanical, electrical and optical proprieties. In particular, PEDOT can be used in a wide range of innovative applications, from electroluminescent devices to photovoltai...

In this work, a new n-type polymer based on a thiazole-diketopyrrolopyrrole unit has been synthesized through direct (hetero)arylation polycondensation. The molar mass has been optimized by systematic variation of the the monomer concentration. Optic...

Two diphosphanes with variable-length ligands tested as nucleophiles to prepare isoporphyrin copolymers in the presence of ditolylporphyrin of zinc (ZnT2P) prevented the oxidation of the diphosphine ligand. This paper demonstrates the power of this a...

In this study, a novel electrochemical oxidation cell using stainless steel electrodes was found to be effective in oxidizing acetaminophen and its transformation products in short reaction times. Aqueous solutions of 10 mg/L-acetaminophen were prepa...

This article presents research on modelling the operation of an independent electricity generation system consisting of a photovoltaic installation and energy storage in the form of electrochemical batteries (PV/BAT). The generation system was consid...