Search Results (16)

Background: It is known that the α-hydroxyphosphonates and their derivatives may have potential biological activity. Methods: Within the prominent class of α-hydroxyphosphonates, α-hydroxy-alkylphosphonates and their derivatives were prepared as new representatives in the hope of obtaining biologically active species. During our work the Pudovik reaction, acylation and phosphinoylation/phosphorylation methods were used. The new compounds were characterized by NMR and MS spectroscopy. The antiproliferative effects were tested on U266 (myeloma multiplex) and A2058 (melanoma) cells. Results: Ethyl methyl ketone–dialkyl phosphite and secondary phosphine oxide adducts were synthesized by the Pudovik reaction on the earlier analogy of acetaldehyde– and acetone adducts. The hydroxyphosphonates and hydroxyphosphine oxides were acylated and phosphinoylated/phosphorylated. Due to the steric hindrance in the case of the preparation of the acetone–and ethyl methyl ketone–diethyl phosphite adducts, a two-step procedure was elaborated that was also suitable for the thiophosphinoylation of the adducts. A part of the α-hydroxyphosphonates could be successfully methanesulfonylated. The new derivatives prepared were tested on myeloma and melanoma cells, and it was found that the antiproliferative activity is primarily driven by phosphinoylation, particularly by diphenylthiophosphinoylation. The most promising compound, the diphenylthiophosphinoylated hydroxyphosphine oxide, reduced the viability of the U266 cells to less than 20% after a treatment with 100 µM concentration in a long-term experiment. Conclusions: A subset of the synthesized α-hydroxyphosphonate derivatives exhibited cytotoxic activity, supporting further structural optimization to identify compounds with enhanced biological efficacy. Full article

The so far unattended version of the Hirao reaction involving the coupling of the less reactive chloroarenes with >P(O)H reagents, such as diarylphosphine oxides, diethyl phosphite, and ethyl phenyl-H-phosphinate, was investigated in detail using Pd(OAc)₂ as the catalyst precursor, and applying some excess of the P-reagent to provide the ligand via its trivalent tautomeric (>P-OH) form. In the presence of triethylamine, no P–C coupling took place, meaning that there was a need for a stronger base, an alkali carbonate. The solvent had a significant effect on the efficiency of the Hirao reaction. The optimum conditions (10% of the Pd(OAc)₂, 1.3 equiv. of the P-reagent, 1.1 equiv. of the alkali carbonate, 135–150 °C) explored herein were applied in the synthesis of diaryl-phenylphosphine oxides, aryl-diphenylphosphine oxides, diethyl arylphosphonates, and ethyl diphenylphosphinate. Theoretical calculations performed at the M06-2X/6-31G(d,p)[PCM(MeCN)] level also justified coupling with the chloroarenes under appropriate conditions, and were in accord with the experimental results revealing the unsuitability of triethylamine as a base and the need for an alkali carbonate. The new protocol elaborated herein is more practical and “greener” than the version with bromoarenes, and embraces a wide substrate scope. Full article

Background: Methylenebisphosphonic derivatives including hydroxy-methylenebisphosphonic species may be of potential biological activity, and a part of them is used in the treatment of bone diseases. Methods: Methylenebisphosphonates may be obtained by the Michaelis–Arbuzov reaction of suitably α-substituted methylphosphonates and trialkyl phosphites or phosphinous esters, while the hydroxy-methylene variations are prepared by the Pudovik reaction of α-oxophosphonates and different >P(O)H reagents, such as diethyl phosphite and diarylphosphine oxides. Results: After converting α-hydroxy-benzylphosphonates and -phosphine oxides to the α-halogeno- and α-sulfonyloxy derivatives, they were utilized in the Michaelis–Arbuzov reaction with trialkyl phosphites and ethyl diphenylphosphinite to afford the corresponding bisphosphonate, bis(phosphine oxide) and phosphonate–phosphine oxide derivatives. The Pudovik approach led to α-hydroxy-methylenebisphosphonic species and to their rearranged products. A part of the derivatives revealed a significant cytotoxic effect on pancreatic adenocarcinoma or multiple myeloma cells. Conclusions: The new families of compounds synthesized by our novel approaches may be of practical importance due to the significant cytotoxic activity on the cell cultures investigated. Compounds lacking hydroxy groups showed anti-myeloma activity or limited effect on pancreatic cancer (PANC-1) cells unless substituted with para-trifluoromethyl group. Hydroxy-containing bisphosphonates and their rearranged derivatives demonstrated varying effects depending on structural modifications. While myeloma (U266) cells indicated greater sensitivity overall, the most significant reductions in cell viability were observed in PANC-1 cancer cells, raising potential therapeutic applications of bisphosphonates beyond myeloma-associated bone disease, particularly for malignancies like pancreatic ductal adenocarcinoma. Full article

Zirconium is recognized as one of the main impurities of the rare earth element scandium during purification. It presents significant challenges due to its similar chemical properties, making separating it difficult. This study used trialkyl phosphine oxide (TRPO) as a functional ligand, and the effects of carrier type and acidity on adsorption performance were first investigated. Among these, the novel extraction resin SiO₂-P as a carrier for TRPO demonstrated more prominent separation performance in 0.2 M H₂SO₄ and 5 M HCl solutions. The kinetic and isotherm data were consistent with the pseudo-secondary kinetics and Langmuir model, respectively, and the adsorption process could be regarded as homogeneous monolayer adsorption subject to the dual effects of chemisorption and internal diffusion. In addition, thermodynamic analysis showed that the adsorption process of zirconium under the experimental conditions was a spontaneous endothermic process. Combined with the results of SEM-EDS, FT-IR, and XPS analyses, scandium and zirconium were successfully adsorbed by the resin and uniformly distributed on its surface, and the greater affinity of the P=O groups on the resin for zirconium was the critical factor contributing to the separation of scandium and zirconium. Finally, scandium and zirconium in sulfuric acid and hydrochloric acid media were extracted and separated by column experiments, and the purity of scandium could reach 99.8% and 99.99%, respectively. Full article

Triphenylphosphine acetylacetone carbonyl rhodium (ROPAC) is an important catalyst in the petrochemical industry, and its deactivated waste catalyst holds significant value for recovery. This study focuses on the existing forms of rhodium (Rh) in waste catalysts and the current status of traditional processes. A green, efficient, and continuous recovery technique was developed using a sealed stainless steel microchannel reactor. The influence of reaction temperature, reaction time, and phase ratio on the Rh recovery rate was investigated, and the process parameters were optimized using response surface methodology (RSM). The results indicate that the magnitude of the impact on the Rh recovery rate follows the order: reaction temperature > reaction time > phase ratio. The optimized process parameters were determined as follows: a reaction time of 29 min, a reaction temperature of 110 °C, and a phase ratio of 1:1, with a corresponding maximum recovery rate of Rh of 66.06%. Furthermore, secondary treatment was performed on the organic phase after primary recovery using the same process conditions, resulting in an overall Rh recovery rate of 95.6%, indicating satisfactory recovery efficiency. Moreover, the application of FTIR and ICP-OES analysis provided definitive evidence that the oxidative dissociation of the rhodium-phosphine chemical bond by H₂O₂ within ROPAC leads to the conversion of Rh⁺ into Rh³⁺. Subsequently, Rh forms chloroaquorhodium (III) complexes that enter the aqueous phase, enabling effective recovery of Rh. Full article

New hydroxy-methylenebisphosphonic derivatives were prepared with different P-functions. The outcome of the reaction of α-oxophosphonates (YC(O)P(O)(OR)₂) and dialkyl phosphites or diarylphosphine oxides depended on the Y substituent of the oxo-compound, the nature of the P-reagent and the amount of the diethylamine catalyst. Starting from dimethyl α-oxoethylphosphonate, in the presence of 5% of diethylamine, the corresponding Pudovik adduct was the single product. While using 40% of the catalyst, the rearranged species with the >P(O)–O–CH–P(O)< skeleton was the exclusive component. A similar reaction of α-oxobenzylphosphonate followed the rearrangement protocol. X-ray crystallography revealed not only the spatial structures of the three products, but also an intricate pattern evolving from the interplay of slight chemical differences, solvent inclusion and disorder as well as H-bridge patterns, which invite further investigation. In vitro activity of the compounds was assessed on different tumor cell cultures using end-point-type cell tetrazolium-based measurements. These structure–activity studies revealed a cytostatic effect for four rearranged derivatives containing aromatic units. One of them had a pronounced effect on MDA-MB 231 and Ebc-1 cells, showing IC₅₀ = 37.8 and 25.9 µM, respectively. Full article

1,4- and 1,2-additons of secondary phosphine oxides to (1R)-myrtenal and (1S)-myrtanal were evaluated as potential routes to P,C-stereogenic phosphine oxides bearing additional hydroxyl or aldehyde functions. 1,4-Additions of racemic secondary phosphine oxides to (1R)-myrtenal were found to offer moderate to good stereoselectivity which shows some promise for utility in kinetic resolution processes, especially at lower conversions. In case of 1,2-additions making the process doubly asymmetric by using an enantiomerically pure secondary phosphine oxide as substrate turned out to be practical. The stereochemical course of the addition reactions under study is presented. The P-resolved 1,2-addition products were demonstrated to undergo facile reduction by BH₃ at room temperature leading to the formation of the corresponding α-hydroxyphosphine-boranes with clean inversion of configuration at the P-centre. All P,C-stereogenic phosphine oxides and boranes that were isolated in the form of a single diastereoisomer were assigned their absolute configurations by means of X-ray crystallography and/or 2D NMR spectral techniques. Full article

It was recently reported that a (2-hydroxybenzyl)phosphine oxide (2-HOBPO) can serve as a phosphorus-centered catalyst for the stereo-invertive coupling of aliphatic alcohols and acidic pronucleophiles (akin to a Mitsunobu reaction, but without additional reagents). Herein, we report an improved synthesis, which provides direct access to systematically varied 2-HOBPOs in a single step from commercially available precursors (salicylaldehydes and secondary phosphines). The efficiency and generality of the synthetic method enabled limited structure–activity relationship (SAR) studies, from which it was determined that substituents on both the phenolic and phosphine oxide portions can exert significant influence on the turnover frequency (TOF) of each catalyst. Importantly, for all catalytically active 2-HOBPOs examined, the molecularity of catalyst in the rate law of the alcohol coupling was determined to be <1. Thus, for high catalyst loadings, differences in catalytic activity between 2-HOBPOs appear to be dominated by differences in catalytic auto-inhibition, while for low catalyst loadings, differences are attributed to inherent differences in the energetic span of the catalytic cycle, ignoring off-cycle species, in good agreement with density functional theory (DFT) modeling at the ωB97X-D/6-311G(d,p) level. Full article

Organophosphorus compounds with stereogenic phosphorus and carbon atoms have received increasing attention. In this regards, primary phosphines with a stereogenic carbon atom adjacent to the phosphorus atom were synthesized by the reduction in phosphonates and phosphonoselenoates with a binaphthyl group. Their oxidized products, i.e., phosphine oxides with a stereogenic tetrasubstituted carbon atom, were found to undergo BEt₃-mediated radical addition to cyclohexene to give P-stereogenic secondary phosphine oxides with a diastereoselectivity of 91:9. The products were characterized by ordinary analytical methods, such as Fourier transform infrared spectroscopy; ¹H, ¹³C, and ³¹P NMR spectroscopies; and mass spectroscopy. Computational studies on the phosphorus-centered radical species and the obtained product implied that the thermodynamically stable radical and the adduct may be formed as a major diastereomer. The radical addition to a range of alkenes took place in an anti-Markovnikov fashion to give P-stereogenic secondary phosphine oxides. A variety of functional groups in the alkenes were tolerated under the reaction conditions to afford secondary phosphine oxides in moderate yields. Primary phosphines with an alkenyl group, which were generated in situ, underwent intramolecular cyclization to give five- and six-membered cyclic phosphines in high yields after protection by BH₃. Full article

The presence of phosphine (PH₃) and hydrogen sulfide (H₂S) in industrial tail gas results in the difficulty of secondary utilization. Using waste solid as a wet absorbent to purify the H₂S and PH₃ is an attractive strategy with the achievement of “waste controlled by waste”. In this study, the reaction mechanism of simultaneously removing H₂S and PH₃ by modified manganese slag slurry was investigated. Through the acid leaching method for raw manganese slag and the solid–liquid separation subsequently, the liquid-phase part has a critical influence on removing H₂S and PH₃. Furthermore, simulation experiments using metal ions for modified manganese slag slurry were carried out to investigate the effect of varied metal ions on the removal of H₂S and PH₃. The results showed that Cu²⁺ and Al³⁺ have a promoting effect on H₂S and PH₃ conversion. In addition, the Cu²⁺ has liquid-phase catalytic oxidation for H₂S and PH₃ through the conversion of Cu(II) to Cu(I). Full article

The reaction of (6-Ph₂P-Ace-5-)₂P(O)H with (tht)AuCl₃ proceeds via elimination of tetrahydrothiophene (tht) and HCl, providing the zwitterionic PPP-pincer complex (6-Ph₂P-Ace-5-)₂P(O)AuCl₂ (1) as yellow crystals. The molecular structure of 1 was established and studied by X-ray crystallography. The electronic structure was computationally analyzed using a comprehensive set of real-space bonding indicators derived from electron and electron-pair densities, providing insight into the relative contributions of covalent and non-covalent forces to the polar-covalent Au–Cl, Au–P, and P–O⁻ bonds; the latter being one of the textbook cases for strongly polarized covalent interactions. Partial spatial complementarity between both bonding aspects is suggested by the electronic properties of the distinctively different Au–Cl bonds. Full article

H-phosphonates, H-phosphinates and secondary phosphine oxides may be preligands, and are important building blocks in the synthesis of pharmaceuticals, pesticides, and P-ligands. The prototropic tautomerism influenced by substituent effects plays an important role in the reactivity of these species. The main goal of our research was to study the tautomerism of the >P(O)H reagents by means of computational investigations applying several DFT methods at different levels. We focused on the effect of implicit solvents, and on explaining the observed trends with physical chemical molecular descriptors. In addition, multiple reaction pathways incorporating three P-molecules were elucidated for the mechanism of the interconversion. Full article

In this paper, the microwave (MW)-assisted catalyst-free and mostly solvent-free Kabachnik–Fields reaction of amino alcohols, paraformaldehyde, and various >P(O)H reagents (dialkyl phosphites, ethyl phenyl-H-phosphinate, and secondary phosphine oxides) is reported. The synthesis of N-2-hydroxyethyl-α-aminophosphonate derivatives was optimized in respect of the temperature, the reaction time, and the molar ratio of the starting materials. A few by-products were also identified. N,N-Bis(phosphinoylmethyl)amines containing a hydroxyethyl group were also prepared by the double Kabachnik–Fields reaction of ethanolamine with an excess of paraformaldehyde and secondary phosphine oxides. The crystal structure of a 2-hydroxyethyl-α-aminophosphine oxide and a bis(phosphinoylmethyl)ethanolamine was studied by X-ray analysis. Full article

The growing demand for lithium necessitates the development of an efficient process to recover it from three kinds of solutions, namely brines as well as acid and alkaline leach liquors of primary and secondary resources. Therefore, the separation of lithium(I) from these solutions by solvent extraction was reviewed in this paper. Lithium ions in brines are concentrated by removing other metal salts by crystallization with solar evaporation. In the case of ores and secondary resources, roasting followed by acid/alkaline leaching is generally employed to dissolve the lithium. Since the compositions of brines, alkaline and acid solutions are different, different commercial extractants are employed to separate and recover lithium. The selective extraction of Li(I) over other metals from brines or alkaline solutions is accomplished using acidic extractants, their mixture with neutral extractants, and neutral extractants mixed with chelating extractants in the presence of ferric chloride (FeCl₃). Among these systems, tri-n-butyl phosphate (TBP)- methyl isobutyl ketone (MIBK)-FeCl₃ and tri-n-octyl phosphine oxide (TOPO)- benzoyltrifluoroacetone (HBTA) are considered to be promising for the selective extraction and recovery of Li(I) from brines and alkaline solutions. By contrast, in the acid leaching solutions of secondary resources, divalent and trivalent metal cations are selectively extracted by acidic extractants, leaving Li(I) in the raffinate. Therefore, bis-2,4,4-trimethyl pentyl phosphinic acid (Cyanex 272) and its mixtures are suggested for the extraction of metal ions other than Li(I). Full article

The single crystal structure of bis(2,4,6-trimethylphenyl)phosphine oxide has been determined. All interatomic distances and angles can be considered normal. The aryl substituents adopt an intermediate configuration when compared to both sterically unhindered (e.g., diphenylphosphine oxide) and congested (e.g., bis(2,4,6-tri-tert-butylphenyl)phosphine oxide) secondary phosphine oxides, illustrating the influence of steric congestion on the molecular structure. Full article