Search Results (7)

Multi-phase motors have recently replaced three-phase induction motors in a variety of applications due to the numerous benefits they provide, and the absence of speed sensors promotes induction motors with variable speed drives. Sensorless speed control minimizes unnecessary speed encoder cost, reduces maintenance, and improves the motor drive’s reliability. The performance comparison of the fuzzy sliding mode controller (FSMC) with adaptive fuzzy proportional integral derivative (AFPID) control methods for sensorless speed control of six-phase induction motors was analyzed in this study, and the proposed control system has an advantage for multiphase machines, specifically six-phase induction motors (IMs) in this study, as they are the current active research area for electric vehicles, hybrid electric vehicles, aerospace, ship propulsion, and high-power applications. The speed control of a six-phase induction motor was performed by using an AFPID controller and FSMC. The comparative performance analysis was based on sensorless speed control of the six-phase induction motor. A proportional integral derivative (PID) controller is commonly employed as it is used to eliminate oscillations, but it has several drawbacks, such as taking a long time to decrease the error and stabilize the system at constant speed. The fuzzy type-2 and PID controllers were hybridized so as to obtain the advantages of both to enhance the system performance. Finally, the comparison result revealed that the FSMC preforms significantly better by achieving good tracking performance. The control technique maintains the sliding mode approach’s robustness while providing reduced overshoots with a smooth control action, and the FSMC revealed good dynamic response under load variations when compared to the AFPID controller. Full article

Multiphase machines have recently been promoted as a viable alternative to traditional three-phase machines. Most experts are looking for strategies to estimate the rotation speed of such complex systems, since speed data are required for high-performance control purposes. Traditionally, electromechanical sensors were used to detect the rotor speed of electric motors. These devices are extremely accurate, but they are also delicate and costly to deploy. New speed estimating algorithms must be created for these situations. This paper looks at how to estimate rotor speed in symmetrical six-phase induction motors (IMs) using a novel strategy for rotor speed estimation based on the Short Time Fourier Transform (STFT) method. The technique is based on tracking the frequencies of the rotor slot harmonics (RSH) seen in most squirrel-cage IM stator currents, thus assuring a broad range of applications. To monitor the RSH, the STFT employs a sliding window to perform the discrete Fourier transform technique, making it more suitable for online use with noisy and nonstationary signals. Experimental tests demonstrate the effectiveness of the suggested approach. Full article

Recent research reveals that multi-phase motors in electric propulsion systems are highly recommended due to their improved reliability and efficiency over traditional three phase motors. This research presented a comparison of optimal model design of a six phase squirrel cage induction motor (IM) for electric propulsion by using Genetic Algorithm (GA) and Particle Swarm Optimization (PSO). A six phase squirrel cage induction motor is designed and simulated by ANSYS Motor-CAD. In order to find the best fit method, simulation results are compared and applied to the motors for electric propulsion, considering the influence of design upon the motor performance. The six-phase squirrel cage induction motor is more energy efficient, reliable and cost effective for the electric propulsion compared to the conventional three phase motor. In this study, first the initial parameters of the six phase squirrel cage induction motor have been determined and then these parameters have been compared with optimized values by Genetic Algorithm (GA) and PSO optimization. The motor designed is optimized using efficiency and power losses as the fitness function. The six phase squirrel cage induction motor is designed using ANSYS Motor-CAD and the simulation results were also presented along with two-dimensional and three-dimensional geometry. The result shows that the weight and power loss are reduced to 161 kg and 0.9359 Kw respectively, while the efficiency and power factor are increased to 0.95 and 0.87 respectively when PSO is used. This shows that the result is promising. Full article

In light of fine learning ability in the existing uncertainties, a sage revised reiterative even Zernike polynomials neural network (SRREZPNN) control with modified fish school search (MFSS) method is proposed to control the six-phase squirrel cage copper rotor induction motor (SSCCRIM) impelled continuously variable transmission assembled system for obtaining the brilliant control performance. This control construction can carry out the SRREZPNN control with the cozy learning law, and the indemnified control with an assessed law. In accordance with the Lyapunov stability theorem, the cozy learning law in the revised reiterative even Zernike polynomials neural network (RREZPNN) control can be extracted, and the assessed law of the indemnified control can be elicited. Besides, the MFSS can find two optimal values to adjust two learning rates with raising convergence. In comparison, experimental results are compared to some control systems and are expressed to confirm that the proposed control system can realize fine control performance. Full article

As the six-phase squirrel cage copper rotor induction motor has some nonlinear characteristics, such as nonlinear friction, nonsymmetric torque, wind stray torque, external load torque, and time-varying uncertainties, better control performances cannot be achieved by utilizing general linear controllers. The snug backstepping control with sliding switching function for controlling the motion of a six-phase squirrel cage copper rotor induction motor drive system is proposed to reduce nonlinear uncertainty effects. However, the previously proposed control results in high chattering on nonlinear system effects and overtorque on matched uncertainties. So as to reduce the immense chattering situation, we then put forward the rectified reiterative sieved-Pollaczek polynomials neural network backstepping control with an improved fish school search method to estimate the external bundled torque uncertainties and to recoup the smallest reorganized error of the evaluated rule. In the light of Lyapunov stability, the online parametric training method of the rectified reiterative sieved-Pollaczek polynomials neural network can be derived by utilizing an adaptive rule. Moreover, to improve convergence and obtain beneficial learning manifestation, the improved fish school search algorithm is made use of to readjust two fickle learning rates of the weights in the rectified reiterative sieved-Pollaczek polynomials neural network. Lastly, the effectuality of the proposed control system is validated by examination results. Full article

This paper presents an altered grey wolf optimization, the Taguchi method, and finite element analysis (FEA) with two-phase multi-objective optimization for the design of a six-phase copper squirrel cage rotor induction motor (SCSCRIM). The multi-objective optimization design with high-performance property aims to achieve lower starting current, lower losses, lower input power, higher efficiency, higher output torque, and higher power factor. The multi-objective optimization design with high-performance property using the altered grey wolf optimization, the Taguchi method, and FEA in the first-phase program is used for minimizing the starting current, stator iron loss, stator copper loss, and input power. The multi-objective optimization design with high-performance property using the altered grey wolf optimization, the Taguchi method, and FEA in the second-phase program is used for maximizing the efficiency, output torque, and power factor. Finally, the proposed skill with higher performances is evaluated and verified via a two-phase program design and some performance tests. Full article

The equivalent inductance of three-phase induction motors is experimentally investigated in this paper, with particular reference to the frequency range from 1 kHz to 20 kHz, typical for the switching frequency in inverter-fed electrical drives. The equivalent inductance is a basic parameter when determining the inverter-motor current distortion introduced by switching modulation, such as rms of current ripple, peak-to-peak current ripple amplitude, total harmonic distortion (THD), and synthesis of the optimal PWM strategy to minimize the THD itself. In case of squirrel-cage rotors, the experimental evidence shows that the equivalent inductance cannot be considered constant in the frequency range up to 20 kHz, and it considerably differs from the value measured at 50 Hz. This frequency-dependent behaviour can be justified mainly by the skin effect in rotor bars affecting the rotor leakage inductance in the considered frequency range. Experimental results are presented for a set of squirrel-cage induction motors with different rated power and one wound-rotor motor in order to emphasize the aforesaid phenomenon. The measurements were carried out by a three-phase sinusoidal generator with the maximum operating frequency of 5 kHz and a voltage source inverter operating in the six-step mode with the frequency up to 20 kHz. Full article