Search Results (27)

The internal architecture of deep-water channels is highly complex. Previous research has primarily emphasized the sedimentary processes governing channel migration, yet the linkage between sediment-source mechanisms and migration patterns—particularly their vertical evolution—remains insufficiently understood. Drawing on 3D seismic data, well logs, and core analyses, this study delineates the channel architecture within the deep-water succession of the Niger Delta Basin. Furthermore, by correlating high-frequency sea-level fluctuations with the formation timing of structural units, we explore how sea-level changes influence the spatial distribution and evolutionary dynamics of submarine fan systems. This study investigated the bottom-up evolution of two channel-lobe systems—the East Channel System (ECS) and West Channel System (WCS) within the stratigraphic succession, identifying two principal channel migration styles: expansive migration and downstream migration. In the ECS, migration was primarily characterized by a combination of downstream and expansive patterns. In contrast, the WCS displayed intermittent downstream migration, accompanied by some irregular migration. Correlation of sea-level variation curves with corresponding core photographs indicates that the ECS developed during a fourth-order sea-level. Its lower lobe and upper channel intervals each correspond to two complete five-stage sea-level cycles. In this system, debris flows and high-density turbidity currents produced stronger lateral erosion and channel migration, giving rise to the expansive migration style. Conversely, the WCS formed during a four-stage sea-level rise, with its lobe and channel sections likewise corresponding to two complete five-stage sea-level cycles. Here, sedimentation dominated by high- and low-density turbidity currents promoted enhanced erosion and migration along the flow direction, resulting in the predominance of downstream migration patterns. The ECS and WCS together constitute a complete three-tiered stratigraphic sequence representing two lobe–channel systems. This configuration deviates to some extent from the conventional understanding of the spatial distribution of debris flows, lobate channels, main channels, and deep-sea mud deposits. Consequently, during intervals of frequent sea-level fluctuation, deep-water sedimentary components within the continental slope region can partially record the signals of fourth- and even fifth-order sea-level variations, facilitated by a stable tectonic framework and favorable sediment preservation conditions. These findings offer valuable insights for reconstructing regional sedimentary processes and interpreting sea-level evolution. Full article

Shallow gas, with huge resources, has been confirmed using three dimensional (3D) seismic data and more than 20 drilling sites in the deep water of the LS36 gas field, the Qiongdongnan Basin, the South China Sea. The interface of sedimentary facies in the southern boundary of the basin controls the distribution within the basin of clastic sediments coming from the north and west of the land uplifted. In this study, seismic data and geophysical attributes were used to investigate the controlling effect of the interface of sedimentary facies on the distribution of shallow gas within the basin. Our study shows that the shallow gas is mainly distributed in the Quaternary Ledong Formation in the southwest of the Qiongdongnan Basin, which was observed from acoustic impedance, amplitude versus offset (AVO), and seismic interpretations. The channelized submarine fans that onlap the interface of the sedimentary facies are distributed in a vertically stacked manner and are the main reservoirs for the shallow gas. Therefore, these sedimentary studies show that the sand-rich sediments are distributed along the interface of the sedimentary facies from the southwest to the northeast and are limited to the shallow gas within the basin. The Central Canyon provides an important deep gas source, while the flank of the canyon, gas chimney, and normal faults related to basement uplift provide pathways for vertical and lateral gas migration to form the shallow gas. This study shows that shallow gas may be widely distributed in other marginal sea basins, and sedimentary systems should be further studied in the future. Full article

The shelf-edge trajectory is comprehensively controlled by tectonics, sediment supply, sea level, and climate fluctuations; its migration and evolution have a strong influence on what happens in the deep-water depositional system during the Quaternary. The shelf-edge trajectory pattern, sediment-budget partitioning into deep-water areas, and reservoir evaluations are focused topics in international geosciences. In this paper, the Qiongdongnan Basin (QDNB) in the northern South China Sea is taken as an example to study how shelf-edge trajectory migration patterns can influence the types of deep-water gravity flow which are triggered there. Through quantitatively delineating the Quaternary shelf-edge trajectory in the QDNB, four types of shelf-edge trajectory are identified, including low angle slow rising type, medium angle rising type, high angle sharp rising type, and retrogradation-slump type. A new sequence stratigraphic framework based on the migration pattern of shelf-edge trajectory is established. There are four (third-order) sequences in the Quaternary, and several systems tracts named lowstand systems tract (LST), transgressive systems tract (TST), and highstand system tract (HST) are identified. This study indicates that the type of deep-water gravity flow can be dominated by the shelf-edge trajectory migration patterns. When the shelf-edge trajectory angle (α) ranged between 0° and 4°, the continental canyons were mostly small-scaled and shallowly incised, with multiple large-scale sandy submarine fan deposits with few MTDs found in the deep-water area. When the angle (α) ranged from 4° < α < 35°, the size and incision depth of the continental slope canyons increased, relating to frequently interbedded sandy submarine fan deposits and MTDs. When angle (α) ranged from 35° < α < 90°, only a few deeply-incised canyons were present in the continental slope; in this condition, large-scaled and long-distance MTDs frequently developed, with fewer submarine fans deposits. When angle (α) ranged from 90° < α < 150°, the valley in the slope area was virtually undeveloped, sediments in the deep-sea plain area consisted mainly of large mass transport deposits, and submarine fan development was minimal. Since the Quaternary, the temperature has been decreasing, the sea level has shown a downward trend, and the East Asian winter monsoon has significantly enhanced, resulting in an overall increase in sediment supply in the study area. However, due to the numerous rivers and rich provenance systems in the west of Hainan Island, a growing continental shelf-edge slope has developed. In the eastern part of Hainan Island, due to fewer rivers, weak provenance sources, strong tectonic activity, and the subsidence center, a type of destructive shelf-edge slope has developed. The above results have certain theoretical significance for the study of shelf-edge systems and the prediction of deep-water gravity flow deposition type. Full article

Investigating the primary influencing factors that regulate the enrichment of shallow gas not only deepens our understanding of the rules governing shallow gas enrichment in deep-ocean environments but also has the potential to enhance the success rate of locating shallow gas reservoirs. Recent drilling activities in the LS36 gas field located in the central Qiongdongnan Basin have revealed a substantial shallow gas reserve within the sediments of the Quaternary Ledong Formation, marking it as the first shallow gas reservoir discovered in the offshore region of China with confirmed natural gas geological reserves surpassing 100 billion cubic meters. However, the formation mechanism and influencing factors of shallow gas enrichment remain elusive due to the limited availability of 3D seismic and well data. This study employs seismic interpretation and digital simulation to decipher the dynamics of shallow gas accumulation and utilizes the carbon isotope composition of methane to ascertain the origin of the shallow gas. Our results show that the shallow gas is primarily concentrated within a large-scale submarine fan, covering a distribution region of up to 2800 km², situated in the deep-sea plain. The δ¹³ C₁ methane carbon isotope data ranges from −69.7‰ to −45.2‰ and all δ¹³ C₂ values are above −28‰, suggesting that the shallow gas within the Ledong Formation is derived from a mix of biogenic gas produced in shallow strata and thermogenic gas generated in deeper source rocks. The results of gas sources, seismic profiles, and digital simulations suggest that thermogenic gas originating from the Lingshui and Beijiao sags was transported to the Quaternary submarine fan via a complex system that includes faults, gas chimneys, and channel sands. The mass-transported deposits (MTDs) in the upper reaches of the submarine fan have effectively acted as a seal, preventing the escape of shallow gas from the fan. Therefore, the factors contributing to the enrichment of shallow gas in the Qiongdongnan Basin include the presence of favorable submarine fan reservoirs, the availability of two distinct gas sources, the effective sealing of MTDs, and the presence of two efficient transport pathways. A conceptual model for the accumulation of shallow gas is developed, illuminating the complex formation–migration–accumulation process. This study underscores the importance of aligning multiple influencing factors in the process of shallow gas accumulation, and the suggested accumulation model may be pertinent to shallow gas exploration in other marginal sea basins. Full article

Structural fracture distribution is essential in oil and gas transportation and development in passive continental margin basins. In this paper, taking as an example the clastic reservoirs in the A-Basin, a passive continental margin in northeastern South America, the paleotectonic stress field of the Late Cretaceous Maastrichtian formation in Basin A was numerically simulated by finite element technique through the integrated interpretation of seismic total data, logging data and core data, and the distribution of tectonic fractures was later predicted based on rock fracture criterion. The results of the study show that: (1) The distribution of tectonic stress and fractures during the Late Cretaceous Maastrichtian formation of Basin A is affected by the fracture zone, mechanical properties of rocks and tectonic stress, regions with extensive fracture development are susceptible to stress concentrations, resulting in significant stress gradients. (2) The development of structural fractures in the study area was predicted using the Griffiths criterion, and the tensile rupture coefficient T was introduced to quantitatively characterise the intensity of fracture development, with larger values reflecting a higher degree of fracture development. The well-developed and relatively well-developed fractures are mainly located in the fracture zones and the interior of submarine fans. (3) Fracture zones and sedimentary phases mainly control structural fractures in Basin A; within 5 km outside the fracture zones, the development of fractures is controlled by the fracture zones, beyond which the regional tectonic stress field controls them; inside the sedimentary fan, the development of fractures is controlled by the sedimentary subphase, which decreases in the order of the upper fan, the middle fan, and the lower fan; inside the subphase, they are controlled by the regional tectonic stress field, and the fractures show the increasing trend in the direction of NW-NE. Full article

The Bounty Channel is a large-scale submarine channel system located in the eastern continental margin of New Zealand. Extending along the axis of the Bounty Trough, the channel system comprises three main tributaries (C1–C3) at its head, which merge downstream into a trunk channel leading to a terminal submarine fan. In this study, we use high-quality two-dimensional multichannel seismic data to investigate the formation and evolution of tributary channels C1 and C2. Four types of seismic facies are identified in the tributary channels: fill-type, mounded divergent, wavy, and subparallel facies. These seismic facies are correspondingly interpreted as topographic depression or channel fills, levees, sediment waves, and hemipelagic deposits. The Late Miocene tributary channels were developed above a pre-existing NE–SW-oriented depression. The Pliocene to Quaternary tributary channels are characterized by preferential development of higher levees on their left hand, and the presence of sediment waves on the lower levees of their right-hand, signaling an effect of the Coriolis force. The formation and evolution of the tributaries are primarily linked to regional tectonics, including increased convergence rate between the Pacific and Australian plates along the Alpine Fault in the Late Miocene and enhanced uplift and erosion at the Southern Alps during the Pliocene. Full article

The lower limits of petrophysical properties for an effective reservoir are among the key parameters for assessing hydrocarbon reserves and are therefore directly related to hydrocarbon exploration and development strategies. However, the lower limits for marine sandstone gas reservoirs are still not clear and the impact factors also remain to be discussed. This study analysed the lower petrophysical property limits of an effective sandstone reservoir in the Qiongdongnan Basin using porosity, permeability and gas testing. The results showed that the lower porosity and permeability limits of effective reservoirs developed in the deltas are 8.9% and 1.2 × 10⁻³ μm², respectively, and 11.3% and 4.0 × 10⁻³ μm² in the submarine canyons and fans, respectively. Sedimentary facies, sediment transport distance, grain size and burial depth of sandstone significantly influence the lower physical property limits. The lower porosity and permeability limits increase with the increase in sediment transport distance as well as the decrease in sandstone grain size and burial depth. Sediment sources and sedimentary facies determine whether sandstone can become an effective reservoir in the Qiongdongnan Basin. Specifically, the sediment source dramatically influences the petrophysical properties of sandstone. The sandstone sourced from the Red River has higher porosity and permeability, followed by the sandstone sourced from the Hainan Uplift, and the sandstone sourced from the palaeo-uplift within the basin has the lowest porosity and permeability. The feldspar dissolution by CO₂ and organic acid is the primary formation mechanism of the effective reservoir in the Lingshui Formation, whereas the dissolution of glauconite is more common in the sandstone reservoirs of the Sanya and Meishan formations. Full article

Herein, the morphological characteristics of submarine archipelagic aprons were presented for five guyots, Suda, Arnold, Lamont, Niulang, and Zhinyv, which are over 80 Ma years old and are located in the Marcus–Wake seamount group, northwestern Pacific Ocean. Nearly 28 landslide deposits were recognized using the bathymetry and backscatter intensity data collected from the studied guyots. Landslides and their deposits that surround seamounts are mostly related to the morphology of debris avalanches, scarps, gullies/channels, and bedforms. The morphology of the archipelagic aprons of the studied guyots indicates mutual landslide processes, including slump and distinct debris avalanches arising from a cohesive or cohesionless landslide material flow. The superimposition of debris flows and sedimentation dominates the recent stages of the studied guyots. The archipelagic aprons corresponding to convex-arc-shaped scarps exhibit larger domains compared to the invagination-arc-shaped scarps with similar lateral lengths. The scarp morphologies of the studied guyots are predominantly of the complex-arc shape, indicating multiple landslide events. Parallel and convergent gullies and channels are mostly found on the elongated landslide deposits, whereas divergent and radial gullies and channels are mostly distributed on the fan-shaped aprons. Ubiquitous sediment waves occurred on the bedforms of the distal archipelagic apron across the studied guyots because of sediment creep. Small-scale sediment waves were only observed in the channels on the aprons of the Suda guyot. Full article

The diagenetic evolution of sandstone is very complicated under the conditions of high temperatures and pressures in deep-water, deep-buried regimes, which have great influence on reservoir quality. This study investigates the typical reservoir target of Neogene deep-water, submarine-fan sandstones under high-temperature, high-pressure regimes in the Qiongdongnan Basin, South China Sea. Utilizing a thin section, scanning electron microscope (SEM), mineral geochemistry combined with burial history evolution, complex diagenetic events, and main controlling factors of the sandstone in the Neogene Meishan Formation were determined. The results show that the evolution of sandstone reservoirs is initially controlled by depositional framework compositions and subsequently modified by eogenetic and mesogenetic alterations during progressive burial. Eogenetic alterations mainly include the following: (1) mechanical compaction; (2) dissolution of feldspar; (3) low-Fe calcite cementation. Mesogenetic events were identified as the following: (1) dissolution of feldspar; (2) ferroan calcite and ankerite formation; (3) precipitation of quartz and clay mineral. Mechanical compaction is greatly influenced by the original depositional framework composition, and sandstone samples enriched in high contents of detrital clay matrix always experienced extensive mechanical compaction. Different phases of carbonate cement during different diagenetic regimes lead to continuous destruction on reservoir porosity. The dissolution of unstable feldspar minerals during eogenetic and mesogenetic environments leads to the development of secondary porosities and would enhance the quality of the reservoir. Overpressure formation is pervasively developed owing to early disequilibrium compaction and subsequent natural gas charging. Only well-sorted sandstones with low contents of detrital clay matrix could resist early mechanical compaction, lead to ample residual original porosities, and then undergo extensive mineral dissolution to generate sufficient secondary porosities. Subsequently, these porosities would be effectively protected by overpressure formation. Poor-sorted sandstones with high contents of detrital clay matrix would experience strong mechanical compaction and extensive destruction of original porosities. Thus, these sandstones are difficult to have significant dissolution and are unable to be effectively protected by overpressure formation. Therefore, the interplay between the original framework composition and the corresponding diagenetic pathways coupled with overpressure formation would result in strong reservoir heterogeneity for the deep-buried sandstones during progressive burial. Full article

This study is based on the detailed sedimentological analysis of eleven sections and one well through the late Eocene–Oligocene flysch formation of the Internal Ionian Zone (IIZ) in Western Greece. The sections are spread from the northern parts of Epirus to the north and Aitolokarnania to the south. Sedimentological data combined with biostratigraphic analyses resulted in a five-stage evolutionary model for the basin. Unit I corresponds to the lower part of the examined sections, indicating the onset of clastic sedimentation. Regarding depositional environments, it is regarded as a basin plain where lobe distal fringe accumulations occur. Unit II consists almost exclusively of heterolithic facies, marking the advance of a lobe complex system. Massive sandstone facies dominate unit III and can be considered a more proximal submarine fan system. Unit IV reflects a calm period of the basin, where mud-dominated heterolithics and hemipelagic mudstones were deposited. Hemipelagic mudstone facies with intervals of heterolithics, conglomerates, and deformed and massive sandstone facies characterize unit V. The architecture resembles a slope system incised by canyons and channels. The sand-rich intervals in Units III and V could act as the most favorable reservoir levels. In contrast, the sand-rich intervals in Unit II are considered less promising due to their higher heterogeneity. Full article

The strata in the Shita Mountain, Yunkai region, are predominantly composed of clastic rocks with intercalated limestones. However, the precise stratigraphic age remains uncertain due to the scarcity of fossils. Previously, conglomerate layers in this region were considered indicative of the Yunan Orogeny during the Cambrian–Ordovician transition. However, through the identification of 12 lithofacies types and 5 lithofacies combinations in the conglomerate layers of the Shita Mountain section, it has been confirmed that these layers represent a fan delta depositional environment characterized by debris flow, traction flow, torrent, and rock flow. Based on the presence of brachiopod fossils dating to the Early–Middle Ordovician, we propose a novel two-episode model for the Yunan Orogeny. The first episode corresponds to submarine fan deposition, while the second episode involves tectonic uplift and a short-term sedimentary hiatus. Further analysis of the detrital zircon provenance reveals a strong affinity among the Yunkai area, India, Antarctica, the Lhasa, the Himalayas, Southern Qiangtang, and Western Australia during the Early–Middle Ordovician transition under the Gondwana assemblage background. Full article

Globally, deep-water reservoir systems are comprised of a variety of traps. Lateral and downdip trapping features include sand pinch-outs, truncation against salt or shale diapirs, and monoclinal dip or faulting with any combination of trapping designs; the potential for massive hydrocarbon accumulations exists, representing significant exploration prospects across the planet. However, deep-water turbidites and submarine fans are two different types of traps, which are developed along the upslope and the basin floor fans. Among these two traps, the basin floor fans are the most prolific traps as they are not influenced by sea-level rise, which distorts the seismic signals, and hence provides ambiguous seismic signatures to predict them as hydrocarbon-bearing zones for future explorations. Therefore, the deep-water channel-levee sand systems and basin floor fans sandstone define economically viable stratigraphic plays. The subsurface variability is significant, and hence, characterizing the thick (porous) channelized-basin floor fans reservoir is a challenge for the exploitation of hydrocarbons. This study aims to develop seismic-based attributes and wedge modeling tools to accurately resolve and characterize the porous and gas-bearing reservoirs using high-resolution seismic-based profiles, in SW Pakistan. The reflection strength slices better delineate the geomorphology of sand-filled channelized-basin floor fans as compared to the instant frequency magnitudes. This stratigraphic prospect has an area of 1180 km². The sweetness magnitudes predict the thickness of channelized-basin floor fans as 33 m, faults, and porous lithofacies that complete a vital petroleum system. The wedge modeling also acts as a direct hydrocarbon indicator (DHI) and, hence, should be incorporated into conventional stratigraphic exploration schemes for de-risking stratigraphic prospects. The wedge model resolves a 26-m thick hydrocarbon-bearing channelized-basin floor fans lens with a lateral distribution of ~64 km. Therefore, this wedge model provides ~75% correlation of the thickness of the LSL as measured by sweetness magnitudes. The thickness of shale that serves as the top seal is 930 m, the lateral mud-filled canyons are 1190 m, and the thick bottom seal is ~10 m, which provides evidence for the presence of a vibrant petroleum play. Hence, their reveals bright opportunities to exploit the economically vibrant stratigraphic scheme inside the OIB and other similar global depositional systems. Full article

Keeping a certain constant airflow in a lot of applications is critical, such as certain airflow volumes in the cabin of an aircraft, submarines, tunnels, and buildings. All fans change their output airflow and air pressure by changing motor speed in real applications. In order to achieve the target airflow volume, normal operation detects the data first, then provides orders to engineers to adjust manually. Extra airflow volume sensors are equipped to measure the airflow so that people know what the current airflow is and how much needs to be adjusted. Based on normal technology, airflow volume sensors and motor speed inverters are necessary parts of a whole air supply system. This research tries to integrate a fuzzy control algorithm into a motor control technology to build a new kind of fan that can not only self-detect the airflow volume changes but also can self-adjust the airflow volumes automatically. This self-detecting and adjusting fan can lead air supply systems in devices and buildings to need no airflow volume sensors, make the air supply system building cost lower, and make the maintaining and operating cost lower. Full article

The Portofino Conglomerate (PC) cropping out in the Eastern Liguria is an approximately 500 m thick, very gently folded succession mainly composed of poorly bedded and mostly matrix-supported conglomerates. It stratigraphically rests on the Helminthoid Flysch (UA3) thrusted onto the Antola Unit. We vertically distinguished three mostly ruditic litho/petrofacies: (i) Paraggi (fP) with carbonate clasts from an Helminthoid Flysch succession; (ii) Monte Pallone (fMP) with prevailing carbonate and meta-carbonate clasts and minor quartz-rich (meta)siliciclastic and high-pressure–low-pressure (HP-LP) metabasite clasts; and (iii) Monte Bocche (fMB) with dominant quartz-rich (meta)siliciclastic, meta-carbonate clasts, and minor granitoid elements and medium-temperature–high-temperature (MT-HT) regional metamorphic rocks. The middle-upper Eocen age of Paraggi litho/petrofacies is constrained by well-preserved microforaminifers (e.g., Globigerinatheka) recovered in the matrix. During its sedimentation, the directions of the paleocurrents would indicate that the PC underwent a counterclockwise rotation coeval with the first Cenozoic rotational phase of the Sardinia–Corsica system (50–30 Ma) and then stopped before the sedimentation of the Monte Pallone and Monte Bocche litho/petrofacies. The vertical compositional variation in the sedimentary inputs suggested that the PC is the result of a progressive deepening of the erosional level of a tectonic pile that can be located in the Ligurian Alps Chain. We considered the PC as the likely apical part of a submarine fan deposited in a piggy-back/thrust-top basin within the Alpine nappe stack. This sedimentary body was later tectonically transported eastward with its UA3 Helminthoid Flysch substrate (similarly to Epiligurian Units of the Northern Apennines) onto the Apenninic orogenic system (i.e., the Antola Unit). Full article

The new approach on depositional conditions of the Messinian evaporites in Zakynthos Island indicates that the evaporites in the Kalamaki and Ag. Sostis areas were redeposited during the Early Pliocene. They accumulated either as turbiditic evaporites or as slumped blocks, as a response to Kalamaki thrust activity. Thrust activity developed a narrow and restricted Kalamaki foreland basin with the uplifted orogenic wedge consisting of Messinian evaporites. These evaporites eroded and redeposited in the foreland basin as submarine fans with turbiditic currents or slumped blocks (olistholiths) that consist of Messinian evaporites. These conditions occurred just before the inundation of the Mediterranean, during or prior to the Early Pliocene (Zanclean). Following the re-sedimentation of the Messinian evaporites, the inundation of the Mediterranean produced the “Lago Mare” fine-grained sediments that rest unconformably over the resedimented evaporites. The “Trubi” limestones were deposited later. It is critical to understand the origin of the “Messinian” Evaporites because they can serve as an effective seal rock for the oil and gas industry. It is thus important to evaluate their thickness and distribution into the SE Mediterranean Sea. Full article