Rapid Analysis Technology for Quality Control and Food Safety

A special issue of Foods (ISSN 2304-8158). This special issue belongs to the section "Food Analytical Methods".

Deadline for manuscript submissions: 30 December 2024 | Viewed by 4801

Special Issue Editors


E-Mail Website
Guest Editor
Food and Wine Science & Technology, PAM UMR A 02.102, Institut Agro, University of Bourgogne Franche-Comté, F-21000 Dijon, France
Interests: molecularly imprinted polymers; analytical chemistry; food chemistry; sample preparation; chromatography; trace analysis
Special Issues, Collections and Topics in MDPI journals

E-Mail Website
Co-Guest Editor
Food and Wine Science & Technology, PAM UMR A 02.102, Institut Agro, University of Bourgogne Franche-Comté, F-21000 Dijon, France
Interests: microbiology; stress response; heat and osmotic kinetics; single cell; whole population

Special Issue Information

Dear Colleagues,

Rapid methods of analysis are becoming a necessity and are increasingly in demand in the field of food quality control and food safety. Rapid methods of food analysis can quickly detect the presence of harmful contaminants in food, such as bacteria, viruses, and chemical contaminants. This can help to prevent outbreaks of foodborne illness and minimize the risk of harm to consumers. Fast methods of food analysis can help to ensure that food products meet regulatory requirements and quality standards. This can improve customer satisfaction and increase consumer confidence in the safety and quality of the products they purchase.

This Special Issue is dedicated, but not limited to, the new technologies of food analysis, such as: NIRS, FTIR, fluorescence, electrochemical sensors, chemical sensors and biosensors, real-time PCR, and ELISA. The developed new methods should not require important sample preparation steps and should be advantageous in terms of rapidity, compared to conventional analytical methods of analysis.

Dr. Elias Bou-Maroun
Dr. Guyot Stéphane
Guest Editors

Manuscript Submission Information

Manuscripts should be submitted online at www.mdpi.com by registering and logging in to this website. Once you are registered, click here to go to the submission form. Manuscripts can be submitted until the deadline. All submissions that pass pre-check are peer-reviewed. Accepted papers will be published continuously in the journal (as soon as accepted) and will be listed together on the special issue website. Research articles, review articles as well as short communications are invited. For planned papers, a title and short abstract (about 100 words) can be sent to the Editorial Office for announcement on this website.

Submitted manuscripts should not have been published previously, nor be under consideration for publication elsewhere (except conference proceedings papers). All manuscripts are thoroughly refereed through a single-blind peer-review process. A guide for authors and other relevant information for submission of manuscripts is available on the Instructions for Authors page. Foods is an international peer-reviewed open access semimonthly journal published by MDPI.

Please visit the Instructions for Authors page before submitting a manuscript. The Article Processing Charge (APC) for publication in this open access journal is 2900 CHF (Swiss Francs). Submitted papers should be well formatted and use good English. Authors may use MDPI's English editing service prior to publication or during author revisions.

Keywords

  • pesticide residues
  • food additives
  • allergens
  • pathogens
  • bacteria
  • virus
  • contaminants
  • pollutants
  • mycotoxins
  • alkaloids
  • PCB
  • dioxins
  • toxic elements
  • FTIR
  • NIR
  • sensor
  • PCR
  • ELISA
  • RAMAN spectroscopy

Published Papers (5 papers)

Order results
Result details
Select all
Export citation of selected articles as:

Research

Jump to: Review

15 pages, 2239 KiB  
Article
Detection of Salt Content in Canned Tuna by Impedance Spectroscopy: A Feasibility Study for Distinguishing Salt Levels
by Inés Zabala, Santos Merino, Unai Eletxigerra, Jorge Ramiro, Miren Burguera and Estibaliz Aranzabe
Foods 2024, 13(11), 1765; https://doi.org/10.3390/foods13111765 - 4 Jun 2024
Viewed by 369
Abstract
The electrical impedance of dilute aqueous solutions containing extracts from five brands of canned tuna is analyzed using impedance spectroscopy in order to analyze their salt content and detect the potential presence of other salts beyond the well-stated NaCl. A complex electrical impedance [...] Read more.
The electrical impedance of dilute aqueous solutions containing extracts from five brands of canned tuna is analyzed using impedance spectroscopy in order to analyze their salt content and detect the potential presence of other salts beyond the well-stated NaCl. A complex electrical impedance is modeled with an equivalent electrical circuit, demonstrating good agreement with experimental data. This circuit accounts for the contribution of ions in the bulk solution, as well as those contributing to electrode polarization. The parameters describing the equivalent circuits, obtained through fitting data to the electrical impedance, are discussed in terms of the various ion contributions to both the electrical double layer at the electrode interface and the electrical conductivity of each solution. The ionic contribution to the electrical impedance is compared with that of a pure NaCl solution at the same concentration range. This comparison, when extended to real samples, allows for the development of a model to estimate the electrical conductivity of canned tuna samples, thereby determining the salt concentration in tuna. The model enables differentiation among the various samples of tuna studied. Subsequently, the potential presence of other ions besides Na+ and Cl and their contribution to the electrical properties of each canned tuna extract is considered, especially for samples with a higher ratio of the sum of K+ and phosphates to Na+ concentration. This analysis shows the potential of impedance spectroscopy for on-site and rapid analysis of salt content and/or detection of additives in canned tuna fish. Full article
(This article belongs to the Special Issue Rapid Analysis Technology for Quality Control and Food Safety)
Show Figures

Graphical abstract

11 pages, 518 KiB  
Article
Exploring Gluten Assessment in Marketed Products through a Sandwich ELISA Methodology Based on Novel Recombinant Antibodies
by Eduardo Garcia-Calvo, Aina García-García, Santiago Rodríguez, Rosario Martín and Teresa García
Foods 2024, 13(9), 1341; https://doi.org/10.3390/foods13091341 - 26 Apr 2024
Viewed by 545
Abstract
This study presents the development of a sandwich ELISA method for gluten detection in foods, using recombinant Fab antibody fragments against gliadin. The Fabs were chemically biotinylated and immobilized on streptavidin-coated plates as capture antibodies, while alkaline phosphatase-conjugated Fabs were used as detection [...] Read more.
This study presents the development of a sandwich ELISA method for gluten detection in foods, using recombinant Fab antibody fragments against gliadin. The Fabs were chemically biotinylated and immobilized on streptavidin-coated plates as capture antibodies, while alkaline phosphatase-conjugated Fabs were used as detection antibodies. Four different gliadin-binding Fabs were tested and the Fab pair Fab8E-4 and Fab-C showed the best compatibility. An indirect sandwich immunoassay, using unmodified Fab8E-4 for capture and Fab-C as the detection antibody, achieved a detection limit of 26 ng/mL of gliadin, corresponding to 10 mg/kg of gluten in foods. No cross-reactivity was observed against 60 gluten-free species commonly used in the food industry. Analysis of 50 commercial products demonstrated consistent results compared to the standard method for gluten detection. The complete lack of cross-reactivity of the developed immunoassay with oat products potentially provides an advantage over other gluten detection systems. Full article
(This article belongs to the Special Issue Rapid Analysis Technology for Quality Control and Food Safety)
Show Figures

Graphical abstract

14 pages, 494 KiB  
Article
Risk Assessment and Determination of Arsenic and Heavy Metals in Fishery Products in Korea
by Do-Yeong Kim, Hyewon Jeon and Han-Seung Shin
Foods 2023, 12(20), 3750; https://doi.org/10.3390/foods12203750 - 12 Oct 2023
Cited by 4 | Viewed by 1429
Abstract
The purpose of this study is to quantify several heavy metals (Pb, Cd, Hg, Me-Hg, and metalloid arsenic) contained in Korean fishery products (seven categories, 1186 samples) and assess their health risk. Heavy metals quantification was conducted using inductively coupled plasma mass spectrometry [...] Read more.
The purpose of this study is to quantify several heavy metals (Pb, Cd, Hg, Me-Hg, and metalloid arsenic) contained in Korean fishery products (seven categories, 1186 samples) and assess their health risk. Heavy metals quantification was conducted using inductively coupled plasma mass spectrometry (ICP-MS) and a direct mercury analysis (DMA). The good linearity (R2 > 0.999), limits of detection (1.0–3.2 µg/kg), limits of quantification (3.1–9.6 µg/kg), accuracy (88.14–113.80%), and precision (0.07–6.02%) of the five heavy metals were obtained, and these results meet the criteria recommended by the AOAC. The average heavy metal concentrations of fishery products were in the following order: As > Cd > Pb > Hg > Me-Hg for sea algae, crustaceans, mollusks, and echinoderms, As > Hg > Me-Hg > Pb > Cd for freshwater fish and marine fish, and As > Pb > Cd > Hg > Me-Hg for tunicates. Heavy metal concentrations were lower than MFDS, EU, CODEX, and CFDA standards. In addition, the exposure, non-carcinogenic, and carcinogenic evaluation results, considering the intake of aquatic products for Koreans, were very low. It was concluded that this study will provide basic data for food safety and risk assessment. Full article
(This article belongs to the Special Issue Rapid Analysis Technology for Quality Control and Food Safety)
Show Figures

Figure 1

13 pages, 2576 KiB  
Article
Optimization of a Molecularly Imprinted Polymer Synthesis for a Rapid Detection of Caffeic Acid in Wine
by Marie Elhachem, Elias Bou-Maroun, Maher Abboud, Philippe Cayot and Richard G. Maroun
Foods 2023, 12(8), 1660; https://doi.org/10.3390/foods12081660 - 16 Apr 2023
Cited by 2 | Viewed by 1469
Abstract
Molecular imprinting is an efficient strategy to make the detection of compounds more specific and more selective. This targeted analytical strategy using molecularly imprinted polymer (MIP) synthesis needs to obtain the optimized conditions. A selective molecularly imprinted polymer was prepared for caffeic acid [...] Read more.
Molecular imprinting is an efficient strategy to make the detection of compounds more specific and more selective. This targeted analytical strategy using molecularly imprinted polymer (MIP) synthesis needs to obtain the optimized conditions. A selective molecularly imprinted polymer was prepared for caffeic acid (CA) detection after varying the following synthesis parameters: functional monomer type (N-phenylacrylamide, N-PAA or methacrylic acid, MAA), solvent type (acetonitrile/methanol or acetonitrile/toluene), and the polymerization method (UV or thermal initiation). The optimal polymer was obtained using MAA as a functional monomer, acetonitrile/methanol as solvent, and UV polymerization. Morphological characterizations were done for the optimal CA-MIP using mid-infrared spectroscopy, scanning electron microscopy, and nitrogen adsorption. The optimal polymer showed good specificity and selectivity in the presence of interferents (antioxidants having a chemical structure close to CA) in a hydroalcoholic solution. The electrochemical detection of CA was performed by cyclic voltammetry (CV) after the interaction between CA and the optimal MIP in a wine sample. The linear range of the developed method was between 0 and 1.11 mM, the limit of detection (LOD) was 0.13 mM, and the limit of quantification (LOQ) was 0.32 mM. HPLC-UV was used to validate the newly developed method. Recovery values were between 104% and 111%. Full article
(This article belongs to the Special Issue Rapid Analysis Technology for Quality Control and Food Safety)
Show Figures

Figure 1

Review

Jump to: Research

19 pages, 2547 KiB  
Review
The Potential of Multi-Screening Methods and Omics Technologies to Detect Both Regulated and Emerging Mycotoxins in Different Matrices
by Marco Lapris, Michela Errico, Gabriele Rocchetti and Antonio Gallo
Foods 2024, 13(11), 1746; https://doi.org/10.3390/foods13111746 - 2 Jun 2024
Viewed by 258
Abstract
Mycotoxins are well-known secondary metabolites produced by several fungi that grow and occur in different crops during both pre-harvest and post-harvest conditions. The contamination and occurrence of mycotoxins currently represent some of the major issues in the entire agri-food system. The quantification of [...] Read more.
Mycotoxins are well-known secondary metabolites produced by several fungi that grow and occur in different crops during both pre-harvest and post-harvest conditions. The contamination and occurrence of mycotoxins currently represent some of the major issues in the entire agri-food system. The quantification of mycotoxins in different feeds and foodstuffs is extremely difficult because of the low concentration ranges; therefore, both sample collection and preparation are essential to providing accurate detection and reliable quantification. Currently, several analytical methods are available for the detection of mycotoxins in both feed and food products, and liquid chromatography coupled with high-resolution mass spectrometry (LC-HRMS) represents the most reliable instrumental approach. In particular, the fast development of high-throughput methods has made it possible to screen and analyze, in the same analytical run and with high accuracy, multiple mycotoxins, such as those regulated, masked, or modified, and emerging ones. Therefore, the aim of this review is to provide an overview of the state of the art of mycotoxins occurrence, health-related concerns, and analyses, discussing the need to perform multi-screening approaches combined with omics technologies to simultaneously analyze several mycotoxins in different feed and food matrices. This approach is expected to provide more comprehensive information about the profile and distribution of emerging mycotoxins, thus enhancing the understanding of their co-occurrence and impact on the entire production chain. Full article
(This article belongs to the Special Issue Rapid Analysis Technology for Quality Control and Food Safety)
Show Figures

Figure 1

Back to TopTop