Next Article in Journal
MEMS-Based Integrated Triaxial Electrochemical Seismometer
Next Article in Special Issue
High Selectivity, Low Damage ICP Etching of p-GaN over AlGaN for Normally-off p-GaN HEMTs Application
Previous Article in Journal
Edge Control in the Computer-Controlled Optical Surface
 
 
Article
Peer-Review Record

Experimental Study on Diesel Engine Emission Characteristics Based on Different Exhaust Pipe Coating Schemes

Micromachines 2021, 12(10), 1155; https://doi.org/10.3390/mi12101155
by Keqin Zhao, Diming Lou, Yunhua Zhang *, Liang Fang and Yuanzhi Tang
Reviewer 1: Anonymous
Reviewer 2:
Micromachines 2021, 12(10), 1155; https://doi.org/10.3390/mi12101155
Submission received: 2 September 2021 / Revised: 22 September 2021 / Accepted: 24 September 2021 / Published: 25 September 2021
(This article belongs to the Special Issue Advanced Micro- and Nano-Manufacturing Technologies)

Round 1

Reviewer 1 Report

Comments on the submitted article:

  1. Section 2.1. Test materials. More detailed information on the test exhaust pipe insulation materials should be provided.
  2. Is Device model: Horiba Mexa7X00 correctly described? The technical characteristics of the device should be provided.
  3. The methodology section should describe the methodology for calculating the conversion rate for different pollutants.
  4. 3, 4, 5 and other pictures must have better quality
  5. A more detailed analysis of the research results should be provided.

Author Response

Please see the attachment

Author Response File: Author Response.docx

Reviewer 2 Report

Paper needs revision.

The materials used for covering pipes can't be referred as coating. The term coating should be replaced by covering.

The description of cover material should be provide in more detail. More clear images should be provided.

Data presented in fig. 6-16 has not been treated statistically. Error bars to be provided.

The figures need explanation especially in terms of fiber/fabric construction and related properties.

Author Response

Please see the attachment

Author Response File: Author Response.docx

Back to TopTop