Next Article in Journal
Progress in Near-Equilibrium Ammonothermal (NEAT) Growth of GaN Substrates for GaN-on-GaN Semiconductor Devices
Previous Article in Journal
Microstructure and Mechanical Properties of Laser Welded Magnesium Alloy/Steel Joint Using Cu-Si Composite Interlayer
Previous Article in Special Issue
Creep and Oxidation Behaviors of 25 wt.% Cr–Containing Nickel-Based Alloys Reinforced by ZrC Carbides
 
 
Article
Peer-Review Record

Effect of Co and Cr on the Stability of Strengthening Phases in Nickelbase Superalloys

Crystals 2022, 12(8), 1084; https://doi.org/10.3390/cryst12081084
by Martin Bäker * and Joachim Rösler
Reviewer 1: Anonymous
Reviewer 2:
Reviewer 3: Anonymous
Crystals 2022, 12(8), 1084; https://doi.org/10.3390/cryst12081084
Submission received: 6 July 2022 / Revised: 21 July 2022 / Accepted: 29 July 2022 / Published: 2 August 2022

Round 1

Reviewer 1 Report

  • If possible, it is desirable to have experimental or literature support for computational studies.

Author Response

 "Please see the attachment"

 

Reviewer 2 Report

This manuscript reported Effect of Co and Cr on the stability of strengthening phases in nickelbase superalloys. As a whole, the article has a good innovative, the experimental contents are very rich and the analysis of the article is comprehensive and professional. However, some problems need to be addressed. I recommend to minor revision.

1. Some grammatical problems were found in manuscript, which need to be revised.

2. The abstract part needs to add some specific experimental data to reflect the innovation of the paper.

3. The introduction section should be improved; some recently published papers about nickelbase superalloy should be added and described for comparison. And what is your innovation?

4. Where is the conclusion?

5. All tables are irregular and have no clear boundary lines.

Author Response

 "Please see the attachment."

Reviewer 3 Report

Dear authors,

The text is well expressed, but please, follow the indications made in the file attached.

After ameding the comments made, the manuscript should be suitable for publication. Please, take into account that a final point of conclusions is missing and must be added to the final version before publication.

 

Author Response

 "Please see the attachment."

 

Back to TopTop