A Step towards CO₂ Sequestration through Mineral Carbonation: Using Ammonium-Based Lixiviants for the Dissolution of Calcium from Iron-Making Blast Furnace Slag

In recent years, technical processes for the sequestration of CO₂ through industrial waste mineral carbonation have been explored and developed. There is a large portfolio of carbon capture, utilisation, and storage (CCUS) techniques that have been employed in laboratories and at pilot scale. These include geological storage, ocean storage, and mineralisation by carbonate ores. In view of this, the main purpose of this research was to investigate and explore chemical variables, particularly ammonium salts as lixiviants for calcium mineral extraction from iron-making slag. The slag in use was acquired from a steel mill in the Vaal Triangle Region in Gauteng, South Africa. The experimental test work was conducted using different ammonium lixiviants, namely, NH₄NO₃, NH₄Cl, and CH₃COONH₄, to understand the influence of anion type as well as possible differences in mechanisms of interactions. Lixiviant concentration as well as reaction time were varied in this research study. The three selected ammonium-based lixiviants showed different extents of calcium extraction owing to differences in the anion groups. NH₄NO₃, NH₄Cl, and CH₃COONH₄ were found to be capable of dissolving 50% to 80% of the calcium from the selected slag for different molar concentrations. Anion type and leaching time also had significant influences on the leaching of calcium from the slag. Rapid pH degradation resulted in better calcium extraction capabilities. This work has shown that the selected ammonium salts have the potential to be lixiviants for calcium dissolution from iron-making blast furnace slags. These lixiviants would, therefore, be important to consider during calcium mineral carbonation for CO₂ sequestration.