Next Article in Journal
Explicit Formulas for Some Infinite 3F2(1)-Series
Next Article in Special Issue
Approach to Multi-Attribute Decision-Making Methods for Performance Evaluation Process Using Interval-Valued T-Spherical Fuzzy Hamacher Aggregation Information
Previous Article in Journal
Strong Interacting Internal Waves in Rotating Ocean: Novel Fractional Approach
Previous Article in Special Issue
A Decision-Making Approach Based on New Aggregation Operators under Fermatean Fuzzy Linguistic Information Environment
 
 
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Article

An Innovative Grey Approach for Group Multi-Criteria Decision Analysis Based on the Median of Ratings by Using Python

by
Dragiša Stanujkić
1,
Darjan Karabašević
2,*,
Gabrijela Popović
2,
Predrag S. Stanimirović
3,
Florentin Smarandache
4,
Muzafer Saračević
5,
Alptekin Ulutaş
6 and
Vasilios N. Katsikis
7
1
Technical Faculty in Bor, University of Belgrade, Vojske Jugoslavije 12, 19210 Bor, Serbia
2
Faculty of Applied Management, Economics and Finance, University Business Academy in Novi Sad, Jevrejska 24, 11000 Belgrade, Serbia
3
Faculty of Sciences and Mathematics, University of Niš, Višegradska 33, 18000 Niš, Serbia
4
Mathematics and Science Division, Gallup Campus, University of New Mexico, 705 Gurley Ave., Gallup, NM 87301, USA
5
Department of Computer Sciences, University of Novi Pazar, Dimitrija Tucovića bb, 36300 Novi Pazar, Serbia
6
Department of International Trade and Logistics, Faculty of Economics and Administrative Sciences, Sivas Cumhuriyet University, Sivas 58140, Turkey
7
Division of Mathematics and Informatics, Department of Economics, National and Kapodistrian University of Athens, Panepistimiopolis, 15784 Ilissia, Greece
*
Author to whom correspondence should be addressed.
Axioms 2021, 10(2), 124; https://doi.org/10.3390/axioms10020124
Submission received: 24 May 2021 / Revised: 7 June 2021 / Accepted: 16 June 2021 / Published: 19 June 2021
(This article belongs to the Special Issue Multiple-Criteria Decision Making)

Abstract

:
Some decision-making problems, i.e., multi-criteria decision analysis (MCDA) problems, require taking into account the attitudes of a large number of decision-makers and/or respondents. Therefore, an approach to the transformation of crisp ratings, collected from respondents, in grey interval numbers form based on the median of collected scores, i.e., ratings, is considered in this article. In this way, the simplicity of collecting respondents’ attitudes using crisp values, i.e., by applying some form of Likert scale, is combined with the advantages that can be achieved by using grey interval numbers. In this way, a grey extension of MCDA methods is obtained. The application of the proposed approach was considered in the example of evaluating the websites of tourism organizations by using several MCDA methods. Additionally, an analysis of the application of the proposed approach in the case of a large number of respondents, done in Python, is presented. The advantages of the proposed method, as well as its possible limitations, are summarized.

1. Introduction

Multi-criteria decision-making (MCDM), or multi-criteria decision analysis (MCDA), has so far been used for solving a large number of numerous different decision-making problems [1,2,3,4]. Therefore, MCDA is dealing with solving complex real-world problems of the greatest interest to the organization that cannot be solved by conventional methods [5,6,7,8]. In due course of time, many multi-criteria analysis (MCA) methods were proposed, primarily due to the dynamic and rapid development of the field of operational research. The following can be mentioned as some of the most cited articles from this area: Hajkowicz and Collins [9], Hajkowicz and Higgins [10], Kaklauskas et al. [11], Kostreva et al. [12], and Belton and Vickers [13].
Besides this research, there are many studies in this area, such as: research and development project portfolio selection [14] (Mavrotas and Makryvelios, 2021), assessing national energy sustainability [15], energy consumption analysis of high-speed trains [16], evaluation of transport emissions reduction policies [17], planning renewable energy use and carbon saving [18], and so forth.
MCDA has also been used successfully for solving decision-making problems that are related to uncertainties or require a group decision-making approach for solving them [19,20,21,22,23,24,25]. As some examples of such approaches, the following can be mentioned: a grey absolute decision analysis [26], a multiple criteria decision analysis framework for the dispersed group [27], a fuzzy multi-criteria analysis [28,29,30], and collaborative decision-making in the multi-actor multi-criteria analysis [31].
From the aforestated, it is clear that some decision-making problems can be more adequately solved if a larger number of respondents take part in solving them. In such cases, the question that arises is how to transform the attitudes collected from respondents into group attitudes.
The approach based on the use of a five-point Liker’s scale, or similar, can be mentioned as one of the probably simplest approaches for collecting the respondents’ attitudes. So far, in numerous articles published in scientific journals, numerous approaches have been proposed for the transformation of individual attitudes acquired in this way into group attitudes. The results obtained, the advantages, as well as the weaknesses of these approaches, are also presented in these journals.
In this article, an approach to the transformation of crisp ratings, collected from respondents, as grey interval numbers form based on the median of collected scores, i.e., ratings, is considered. Therefore, the article proposes the transformation of individual ratings collected from respondents into grey intervals with the aim of performing MCDA with minimal loss of information in relation to cases when crisp ratings are transformed into crisp group ratings. The application of the proposed approach was considered on the example of evaluating the websites of tourism organizations by using several MCDA methods, and also an analysis of the application of the proposed approach in the case of a large number of respondents was done in Python and described. Additionally, the main idea of the article was to propose a simple procedure for gathering respondent’s attitudes instead of a complex procedure that is sometimes difficult to understand by ordinary respondents/decision-makers who are not familiar with MCDM and fuzzy logic.
Therefore, the rest of this article is organized as follows: In Section 2, some basic definitions about grey numbers are given, while a new approach is proposed in Section 3. In Section 4, a numerical illustration is presented in order to highlight the basic characteristics of the proposed approach, while in Section 5 an analysis of the obtained results is performed. Finally, conclusions are given at the end of the article.

2. Preliminaries

Definition 1.
Grey number [32]. A grey number x is such a number whose exact value is unknown, but the range in which value can lie is known.
Definition 2.
Interval grey number [32]. An interval grey number is a grey number with a known lower bound x _   and upper bound   x ¯ , but with the unknown value of x, and it is shown as follows:
x [ x _ , x ¯ ] = [ x _ x x ¯ ] .
Definition 3.
The whitening function [33,34,35]. The whitening function transforms an interval grey number into a crisp number whose possible values lie between the bounds of the interval grey number. For the given interval grey number, the whitened value x(λ) of interval grey number x is defined as
x ( λ ) = ( 1 λ ) x _ + λ x ¯ ,  
where [ 0 , 1 ] denotes the whitening coefficient.
In the particular case λ = 0.5, the whitened value becomes the mean of the interval grey number, as follows:
x ( 0.5 ) = 0.5 ( x _ + x ¯ ) .  

3. The Newly Proposed Approach

Suppose that the decision matrix is presented in the form
D = [ x i j k ] ,
where: x i j k denotes the evaluation of alternative i to criterion j stated by the decision-maker k; i = 1,…,m, and m denotes the number of alternatives; j = 1,…,n, and n denotes the number of criteria; k = 1… K, and K denotes the number of decision-makers.
Such a three-dimensional matrix can be transformed into a group two-dimensional matrix as follows:
D = [ x i j ] ,
with
x i j = ( k = 1 K x i j k ) / K .
Essentially, x i j denotes rating of alternative i to criterion j. Such defined x i j is actually the mean value of all assessments of the alternative i in relation to the criterion j.
However, the matrix shown using Equation (4) can be also transformed into a grey group decision matrix, as follows:
D = ( [ x _ i j , x ¯ i j ] ) ,
with
x _ i j = ( k k x i j k ) / n ;
x ¯ i j = ( k k + x i j k ) / n + .
In (8), k denotes the set of elements whose values are less than or equal to the median value of x i j k , and n denotes the number of elements in this set. Similarly, k + in (9) denotes a set of elements whose values are greater than or equal to the median value of x i j k and n + denotes the number of elements in this set.

Example

Let S be a sequence of 10 integers from interval [1, 5] and S = (1, 2, 3, 1, 5, 3, 3, 1, 4, 5).
Then, the mean and median of S are as follows: mean = 2.80 and median = 3.00. The mean value of a number which is less than or equal to the median (1, 2, 3, 1, 3, 3, 1) is xl = 2.00 and the mean value of a number greater or equal to the median (3, 5, 3, 3, 4, 5) is xu = 3.83.
The mean value of such interval [2.00, 3.83], determined using Equation (3), is 2.915, and the distance between it and the mean is 2.915 − 2.80 = 0.115, that is in percentages 4.11%.
The results obtained based on several sequences of randomly generated numbers from interval [1, 10] are shown in Table 1. The calculation was done in Python using the seed (1).
From Table 1, it can be seen that the difference between the mean value of the sequence of numbers and the value obtained by the proposed approach is not large.

4. A Numerical Illustration

In this section, the use of the proposed approach is presented in the case of evaluating websites of tourist organizations from Eastern Serbia. The evaluation was performed on the websites of 5 tourist organizations from the Timok frontier, or more precisely tourist organizations of the Municipalities of Boljevac, Bor, Majdanpek, Negotin and Kladovo (It is important to state that the order of municipalities does not correspond to the order of alternatives, because the aim of this article is not to favor any of the above-mentioned tourist organizations.). The evaluation is performed based on the following criteria: Visual design—C1, Structure and navigability—C2, Content—C3, Innovation—C4, Personalization—C5.
The evaluation was performed using ARAS [36], WASPAS [37], CoCoSo [38] and WISP [39] methods. In the first case, the evaluation was performed using ordinary MCDA methods and the mean value of the collected ratings, while in the first case, the evaluation was performed using the proposed approach.
This illustration does not show all the possibilities that the proposed approach provides in terms of analysis. The main goal was to compare the results obtained by applying the mean value of all assessments and the proposed approach, where the transformation of grey numbers was performed using Equation (3) and λ = 0.5.
The rating obtained from 10 respondents is shown in Table 2, Table 3, Table 4, Table 5 and Table 6.
The group decision matrix, formed on the basis of the responses of all respondents, is shown in Table 7. The elements of this matrix represent the mean value of the ratings obtained from the respondents.
A similar decision matrix is shown in Table 8, where the elements of that matrix represent the median of ratings obtained from the respondents.
The results of the evaluation performed using ordinary ARAS, WASPAS, CoCoSo and WISP methods, weighting vector wi = (0.25, 0.24, 0.22, 0.20, 0.10), and the data from Table 7, are shown in Table 9.
In the second case, based on data from Table 8 as well as ratings from Table 2, Table 3, Table 4, Table 5 and Table 6, a grey decision matrix was formed as shown in Table 10.
The evaluation results generated using the grey ARAS, WASPAS, CoCoSo and WISP methods, and the data from Table 10, are shown in Table 11. It should be noted again that the grey numbers from Table 10 were transformed into crisp values, using Equation (3) and λ = 0.5, before the evaluation.
From Table 9 and Table 11, it can be seen that differences in ranking orders of alternatives achieved on the basis of the mean value of all assessments and the proposed approach were not observed. Of course, it should be reiterated here that the proposed approach provides significantly greater opportunities in terms of analyzing various scenarios, such as pessimistic or optimistic.

5. Analysis and Discussion

In order to verify the proposed approach, this section presents the results of the evaluation based on the assessments of a number of virtual respondents. For easier evaluation, the scores were generated as random numbers from the interval [1, 10], using a program written in the Python programming language, in which all calculations were also performed. In this analysis, random numbers are generated with the seed (1). The results obtained on the basis of series of 10, 50, 100 and 150 virtual respondents are shown in Table 12, Table 13, Table 14, Table 15, Table 16, Table 17, Table 18, Table 19 and Table 20. The weighting vector wi = (0.2, 0.2, 0.2, 0.2, 0.2) is used in this evaluation.
The calculation details obtained on the basis of 10 virtual respondents are shown in Table 12 and Table 13. As can be seen from Table 12 and Table 13, in this case, the same ranking orders are obtained by applying all methods and approaches.
The calculation details obtained on the basis of 50 virtual respondents are shown in Table 14, Table 15 and Table 16. In this case, there were some discrepancies in the order of the second and third-placed alternatives, which can be clearly seen in Figure 1.
It can be seen from Table 14 and Table 15 that differences between second-placed and third-placed alternatives are not high, which is why it can be expected that the same ranking order of alternatives could be obtained by using another weight vector.
Ranking orders of alternatives, obtained on the basis of 100 virtual respondents, are shown in Tabe 17, and presented in Figure 2. This case is similar to the previous one.
From Table 17 and Figure 2 it can be observed that in this case, the differences occur only in the case of the second and third-placed alternatives.
Ranking orders of alternatives that arise from 150 virtual respondents are arranged in Table 18, Table 19 and Table 20 and presented in Figure 3.
Table 20 and Figure 3 clearly show that the alternative A4 is best ranked according to all methods, with all crisp methods gave the same order of ranking A4, A1, A2, A5, A3, while the proposed grey approach gave the following rankings order A4, A1, A2, A3, A5. However, from Table 20 it is observable that there are very small differences in overall performance between the second-placed, third-placed and fourth-placed alternatives, which is why it can be expected that different ranking orders of alternatives could be obtained by using another weighting vector.

6. Conclusions

The advantages of using grey instead of crisp numbers in multi-criteria decision analysis have been considered and proven in a number of previously published studies. One of the advantages which should be emphasized using grey numbers is the possibility of considering various scenarios, such as: pessimistic, realistic, and optimistic. The proposed approach allows the transformation of crisp ratings, collected by employing surveys based on the use of the Likert scale, into grey numbers and thus considering different scenarios. The proposed approach may be suitable when it is necessary to collect and analyze the realistic attitudes of a larger number of respondents. Moreover, the proposed transformation enables greater robustness and further possibility of analysis and consideration of different scenarios.
The results of the website evaluation based on the mean value of the ratings obtained from all respondents and the proposed approach did not indicate a difference in the ranking orders of alternatives. However, the results of the conducted analysis indicate that differences may arise between the two approaches, especially in the case of the lower-ranked alternatives.
Some differences in the results are expected because the proposed approach is not a substitute for applying the mean value of the scores obtained from all respondents, but an approach that further allows the possibility of analysis. Certain differences in the ranking results using the newly proposed approach and applying the mean of the scores obtained in all respondents can be cited as a weakness of this approach.
Finally, consideration of the transformation of a larger number of crisp ratings into corresponding triangular fuzzy numbers or interval-valued triangular fuzzy numbers can be mentioned as one of the possible directions for the further development of the proposed approach.

Author Contributions

Conceptualization, P.S.S., D.K., V.N.K. and G.P.; methodology, D.K., D.S. and F.S.; validation, A.U.; investigation, A.U.; data curation, G.P.; writing—original draft preparation, D.S., V.N.K. and M.S.; writing—review and editing, P.S.S. and M.S.; supervision, D.K.; funding acquisition, F.S. All authors have read and agreed to the published version of the manuscript.

Funding

The research presented in this article was done with the financial support of the Ministry of Education, Science and Technological Development of the Republic of Serbia, within the funding of the scientific research work at the University of Belgrade, Technical Faculty in Bor, according to the contract with registration number 451-03-9/2021-14/200131.

Conflicts of Interest

The authors declare no conflict of interest.

References

  1. Ulutaş, A.; Stanujkic, D.; Karabasevic, D.; Popovic, G.; Zavadskas, E.K.; Smarandache, F.; Brauers, W.K. Developing of a Novel Integrated MCDM MULTIMOOSRAL Approach for Supplier Selection. Informatica 2021, 32, 145–161. [Google Scholar] [CrossRef]
  2. Karabasevic, D.; Radanov, P.; Stanujkic, D.; Popovic, G.; Predic, B. Going green: Strategic evaluation of green ICT adoption in the textile industry by using bipolar fuzzy Multimoora method. Ind. Text. 2021, 72, 3–10. [Google Scholar] [CrossRef]
  3. Jaukovic Jocic, K.; Jocic, G.; Karabasevic, D.; Popovic, G.; Stanujkic, D.; Zavadskas, E.K.; Thanh Nguyen, P. A novel integrated piprecia–interval-valued triangular fuzzy aras model: E-learning course selection. Symmetry 2020, 12, 928. [Google Scholar] [CrossRef]
  4. Karabašević, D.; Stanujkić, D.; Zavadskas, E.K.; Stanimirović, P.; Popović, G.; Predić, B.; Ulutaş, A. A Novel Extension of the TOPSIS Method Adapted for the Use of Single-Valued Neutrosophic Sets and Hamming Distance for E-Commerce Development Strategies Selection. Symmetry 2020, 12, 1263. [Google Scholar] [CrossRef]
  5. Amiri, M.; Hashemi-Tabatabaei, M.; Ghahremanloo, M.; Keshavarz-Ghorabaee, M.; Zavadskas, E.K.; Antucheviciene, J. A novel model for multi-criteria assessment based on BWM and possibilistic chance-constrained programming. Comput. Ind. Eng. 2021, 156, 107287. [Google Scholar] [CrossRef]
  6. Lu, K.; Liao, H.; Zavadskas, E.K. An overview of fuzzy techniques in supply chain management: Bibliometrics, methodologies, applications and future directions. Technol. Econ. Dev. Econ. 2021, 27, 402–458. [Google Scholar] [CrossRef]
  7. Stanujkic, D.; Zavadskas, E.K.; Liu, S.; Karabasevic, D.; Popovic, G. Improved OCRA method based on the use of interval grey numbers. J. Grey Syst. 2017, 29, 49–60. [Google Scholar]
  8. Popovic, G.; Stanujkic, D.; Brzakovic, M.; Karabasevic, D. A multiple-criteria decision-making model for the selection of a hotel location. Land Use Policy 2019, 84, 49–58. [Google Scholar] [CrossRef]
  9. Hajkowicz, S.; Collins, K. A review of multiple criteria analysis for water resource planning and management. Water Resour. Manag. 2007, 21, 1553–1566. [Google Scholar] [CrossRef]
  10. Hajkowicz, S.; Higgins, A. A comparison of multiple criteria analysis techniques for water resource management. Eur. J. Oper. Res. 2008, 184, 255–265. [Google Scholar] [CrossRef]
  11. Kaklauskas, A.; Zavadskas, E.K.; Raslanas, S. Multivariant design and multiple criteria analysis of building refurbishments. Energy Build. 2005, 37, 361–372. [Google Scholar] [CrossRef]
  12. Kostreva, M.M.; Ogryczak, W.; Wierzbicki, A. Equitable aggregations and multiple criteria analysis. Eur. J. Oper. Res. 2004, 158, 362–377. [Google Scholar] [CrossRef] [Green Version]
  13. Belton, V.; Vickers, S.P. Demystifying DEA—A visual interactive approach based on multiple criteria analysis. J. Oper. Res. Soc. 1993, 44, 883–896. [Google Scholar]
  14. Mavrotas, G.; Makryvelios, E. Combining multiple criteria analysis, mathematical programming and Monte Carlo simulation to tackle uncertainty in Research and Development project portfolio selection: A case study from Greece. Eur. J. Oper. Res. 2021, 291, 794–806. [Google Scholar] [CrossRef]
  15. Phillis, A.; Grigoroudis, E.; Kouikoglou, V.S. Assessing national energy sustainability using multiple criteria decision analysis. Int. J. Sustain. Dev. World Ecol. 2021, 28, 18–35. [Google Scholar] [CrossRef]
  16. Peng, Y.; Zhang, H.; Wang, T.; Yang, M.; Wang, K.; Meng, W.; Wang, D. Energy consumption analysis and multiple-criteria evaluation of high-speed trains with different marshaled forms in China. Sci. Total Environ. 2021, 759, 143678. [Google Scholar] [CrossRef]
  17. Hasan, M.A.; Chapman, R.; Frame, D.J. Acceptability of transport emissions reduction policies: A multi-criteria analysis. Renew. Sustain. Energy Rev. 2020, 133, 110298. [Google Scholar] [CrossRef]
  18. Ahmed, A.; Sutrisno, S.W.; You, S. A two-stage multi-criteria analysis method for planning renewable energy use and carbon saving. Energy 2020, 199, 117475. [Google Scholar] [CrossRef]
  19. Huang, H.; Mommens, K.; Lebeau, P.; Macharis, C. The Multi-Actor Multi-Criteria Analysis (MAMCA) for Mass-Participation Decision Making. In International Conference on Decision Support System Technology; Springer International Publishing: Cham, Switzerland, 2021; pp. 3–17. [Google Scholar]
  20. Salo, A.; Hämäläinen, R.; Lahtinen, T. Multicriteria Methods for Group Decision Processes: An Overview. In Handbook of Group Decision and Negotiation; Kilgour, D.M., Eden, C., Eds.; Springer Science & Business Media: Berlin/Heidelberg, Germany, 2021. [Google Scholar]
  21. Tao, R.; Liu, Z.; Cai, R.; Cheong, K.H. A dynamic group MCDM model with intuitionistic fuzzy set: Perspective of alternative queuing method. Inf. Sci. 2021, 555, 85–103. [Google Scholar] [CrossRef]
  22. Hsu, W.C.J.; Liou, J.J.; Lo, H.W. A group decision-making approach for exploring trends in the development of the healthcare industry in Taiwan. Decis. Support Syst. 2021, 141, 113447. [Google Scholar] [CrossRef]
  23. Zhan, J.; Zhang, K.; Wu, W.Z. An investigation on Wu-Leung multi-scale information systems and multi-expert group decision-making. Expert Syst. Appl. 2021, 170, 114542. [Google Scholar] [CrossRef]
  24. Liu, S.; Yu, W.; Chan, F.T.; Niu, B. A variable weight-based hybrid approach for multi-attribute group decision making under interval-valued intuitionistic fuzzy sets. Int. J. Intell. Syst. 2021, 36, 1015–1052. [Google Scholar] [CrossRef]
  25. Biswas, S.; Pamucar, D. Facility location selection for b-schools in indian context: A multi-criteria group decision based analysis. Axioms 2020, 9, 77. [Google Scholar] [CrossRef]
  26. Javed, S.A.; Mahmoudi, A.; Liu, S. Grey Absolute Decision Analysis (GADA) Method for multiple criteria group decision-making under uncertainty. Int. J. Fuzzy Syst. 2020, 22, 1073–1090. [Google Scholar] [CrossRef]
  27. Carneiro, J.; Martinho, D.; Alves, P.; Conceição, L.; Marreiros, G.; Novais, P. A multiple criteria decision analysis framework for dispersed group decision-making contexts. Appl. Sci. 2020, 10, 4614. [Google Scholar] [CrossRef]
  28. Al Asbahi, A.A.M.H.; Fang, Z.; Chandio, Z.A.; Tunio, M.K.; Ahmed, J.; Abbas, M. Assessing barriers and solutions for Yemen energy crisis to adopt green and sustainable practices: A fuzzy multi-criteria analysis. Environ. Sci. Pollut. Res. 2020, 27, 36765–36781. [Google Scholar] [CrossRef]
  29. Musaad, O.A.S.; Zhuo, Z.; Musaad, O.A.O.; Ali Siyal, Z.; Hashmi, H.; Shah, S.A.A. A fuzzy multi-criteria analysis of barriers and policy strategies for small and medium enterprises to adopt green innovation. Symmetry 2020, 12, 116. [Google Scholar] [CrossRef] [Green Version]
  30. Durmić, E.; Stević, Ž.; Chatterjee, P.; Vasiljević, M.; Tomašević, M. Sustainable supplier selection using combined FUCOM—Rough SAW model. Rep. Mech. Eng. 2020, 1, 34–43. [Google Scholar] [CrossRef]
  31. Huang, H.; De Smet, Y.; Macharis, C.; Doan, N.A.V. Collaborative decision-making in sustainable mobility: Identifying possible consensuses in the multi-actor multi-criteria analysis based on inverse mixed-integer linear optimization. Int. J. Sustain. Dev. World Ecol. 2021, 28, 64–74. [Google Scholar] [CrossRef]
  32. Deng, J.L. Introduction to Grey System Theory. J. Grey Syst. 1989, 1, 1–24. [Google Scholar]
  33. Liu, S.F.; Yang, Y.J.; Forrest, J.Y.L. Grey Data Analysis: Methods, Models and Applications; Springer: Berlin/Heidelberg, Germany, 2016. [Google Scholar]
  34. Liu, S.F.; Forrest, J.Y.L. Grey Systems: Theory and Applications; Springer: Berlin/Heidelberg, Germany, 2010. [Google Scholar]
  35. Liu, S.; Rui, H.; Fang, Z.; Yang, Y.; Forrest, J. Explanation of terms of grey numbers and its operations. Grey Syst. Theory Appl. 2016, 6, 436–441. [Google Scholar] [CrossRef]
  36. Turskis, Z.; Zavadskas, E.K. A novel method for multiple criteria analysis: Grey additive ratio assessment (ARAS-G) method. Informatica 2010, 21, 597–610. [Google Scholar] [CrossRef]
  37. Zavadskas, E.K.; Turskis, Z.; Antucheviciene, J. Selecting a Contractor by Using a Novel Method forMultiple Attribute Analysis: Weighted Aggregated SumProduct Assessment with Grey Values (WASPAS-G). Stud. Inform. Control. 2015, 24, 141–150. [Google Scholar] [CrossRef] [Green Version]
  38. Yazdani, M.; Wen, Z.; Liao, H.; Banaitis, A.; Turskis, Z. A grey combined compromise solution (COCOSO-G) method for supplier selection in construction management. J. Civ. Eng. Manag. 2019, 25, 858–874. [Google Scholar] [CrossRef] [Green Version]
  39. Stanujkic, D.; Popovic, G.; Karabasevic, D.; Meidute-Kavaliauskiene, I.; Ulutas, A. An Integrated Simple Weighted Sum Product Method—WISP. IEEE Trans. Eng. Manag. 2021, 1–12. [Google Scholar] [CrossRef]
Figure 1. Ranking orders of alternatives obtained on the basis of 50 virtual respondents.
Figure 1. Ranking orders of alternatives obtained on the basis of 50 virtual respondents.
Axioms 10 00124 g001
Figure 2. Ranking orders of alternatives obtained on the basis of 100 virtual respondents.
Figure 2. Ranking orders of alternatives obtained on the basis of 100 virtual respondents.
Axioms 10 00124 g002
Figure 3. Ranking orders of alternatives obtained on the basis of 150 virtual respondents.
Figure 3. Ranking orders of alternatives obtained on the basis of 150 virtual respondents.
Axioms 10 00124 g003
Table 1. Difference between the mean value of the sequence of numbers and the value obtained by the proposed approach.
Table 1. Difference between the mean value of the sequence of numbers and the value obtained by the proposed approach.
SampleMeanMedianxlxuxm = (xuxl)/2d = abs(Meanxm)d (%)
55.605.004.007.005.500.101.79
107.107.505.408.807.100.000.00
155.136.002.887.505.190.051.06
206.507.005.088.006.540.040.64
254.524.002.436.504.460.061.23
505.205.003.077.145.110.091.81
1005.015.002.937.095.010.000.02
1505.165.003.056.914.980.183.45
Table 2. Ratings of alternative A1 in relation to the evaluation criteria obtained from 10 respondents.
Table 2. Ratings of alternative A1 in relation to the evaluation criteria obtained from 10 respondents.
A1IIIIIIIVVVIVIIVIIIIXX
C11233533432
C23345344424
C33343344554
C41123445232
C52122123432
Table 3. Ratings of alternative A2 in relation to the evaluation criteria obtained from 10 respondents.
Table 3. Ratings of alternative A2 in relation to the evaluation criteria obtained from 10 respondents.
A2IIIIIIIVVVIVIIVIIIIXX
C13544445322
C25545455434
C32444345333
C44454225353
C54453434324
Table 4. Ratings of alternative A3 in relation to the evaluation criteria obtained from 10 respondents.
Table 4. Ratings of alternative A3 in relation to the evaluation criteria obtained from 10 respondents.
A3IIIIIIIVVVIVIIVIIIIXX
C11222222321
C23554223444
C31442224322
C41133114211
C53553443444
Table 5. Ratings of alternative A4 in relation to the evaluation criteria obtained from 10 respondents.
Table 5. Ratings of alternative A4 in relation to the evaluation criteria obtained from 10 respondents.
A4IIIIIIIVVVIVIIVIIIIXX
C14445444454
C25545334553
C35544334555
C44455535543
C54453443544
Table 6. Ratings of alternative A5 in relation to the evaluation criteria obtained from 10 respondents.
Table 6. Ratings of alternative A5 in relation to the evaluation criteria obtained from 10 respondents.
A4IIIIIIIVVVIVIIVIIIIXX
C14355535343
C24445435444
C35444334435
C44453243533
C53444434544
Table 7. Group decision-making matrix.
Table 7. Group decision-making matrix.
Criteria AlternativesC1C2C3C4C5
A12.903.603.802.702.20
A23.604.403.503.703.60
A31.903.602.601.803.90
A44.204.204.304.304.00
A54.004.103.903.603.90
Table 8. The median of ratings obtained from the respondents.
Table 8. The median of ratings obtained from the respondents.
Criteria AlternativesC1C2C3C4C5
A12.963.813.922.702.11
A23.794.403.503.823.81
A31.953.792.311.403.96
A44.104.204.304.304.00
A54.004.053.963.603.95
Table 9. Ranking of alternatives using ordinary ARAS, WASPAS, CoCoSo and WISP methods.
Table 9. Ranking of alternatives using ordinary ARAS, WASPAS, CoCoSo and WISP methods.
ARASWASPASCoCoSoWISP
AlternativesSiRankSiRankSiRankSiRank
A10.7340.7341.8040.874
A20.8830.8832.1730.953
A30.6150.6051.4950.815
A40.9910.9912.4311.001
A50.9220.9222.2520.962
Table 10. Grey group decision-making matrix.
Table 10. Grey group decision-making matrix.
Criteria AlternativesC1C2C3C4C5
A1[2.50, 3.43][3.44, 4.17][3.50, 4.33][1.60, 3.80][1.71, 2.50]
A2[3.25, 4.33][3.80, 5.00][2.80, 4.20][3.14, 4.50][3.44, 4.17]
A3[1.78, 2.13][3.25, 4.33][1.83, 2.78][1.00, 1.80][3.62, 4.29]
A4[4.00, 4.20][3.40, 5.00][3.60, 5.00][3.60, 5.00][3.75, 4.25]
A5[3.33, 4.67][3.88, 4.22][3.63, 4.29][2.80, 4.40][3.78, 4.13]
Table 11. Ranking of alternatives using grey WS, WP, WASPAS and CoCoSo methods.
Table 11. Ranking of alternatives using grey WS, WP, WASPAS and CoCoSo methods.
ARASWASPASCoCoSoWISP
AlternativesSiRankSiRankSiRankSiRank
A10.7640.4641.9040.744
A20.9130.5532.2930.893
A30.5950.3651.4750.625
A40.9910.6012.4810.991
A50.9220.5622.3220.922
Table 12. Ranking of alternatives on the basis of 10 virtual respondents and crisp approach.
Table 12. Ranking of alternatives on the basis of 10 virtual respondents and crisp approach.
WSWPWASPASCoCoSoWISP
AlternativesSiRankPiRankQiRankKiRankSiRank
A10.8350.7550.7551.7750.595
A21.0010.9110.9112.1611.001
A30.9820.8720.8822.0920.882
A40.8440.7540.7641.7940.614
A50.8930.8030.8131.9130.713
Table 13. Ranking of alternatives on the basis of 10 virtual respondents and the proposed grey approach.
Table 13. Ranking of alternatives on the basis of 10 virtual respondents and the proposed grey approach.
WSWPWASPASCoCoSoWISP
AlternativesSiRankPiRankQiRankKiRankSiRank
A10.8250.7450.7551.7850.585
A21.0010.9210.9212.1811.001
A30.9520.8420.8622.0420.802
A40.8340.7540.7541.7940.594
A50.8830.8030.8131.9130.693
Table 14. Ranking of alternatives on the basis of 50 virtual respondents and crisp approach.
Table 14. Ranking of alternatives on the basis of 50 virtual respondents and crisp approach.
WSWPWASPASCoCoSoWISP
AlternativesSiRankPiRankSiSiKiRankSiRank
A10.9730.9430.9431.9030.913
A20.9240.8940.8941.8040.784
A31.0010.9710.9711.9711.001
A40.9150.8850.8951.7950.775
A50.9720.9420.9521.9120.912
Table 15. Ranking of alternatives on the basis of 50 virtual respondents and the proposed grey approach.
Table 15. Ranking of alternatives on the basis of 50 virtual respondents and the proposed grey approach.
WSWPWASPASCoCoSoWISP
AlternativesSiRankPiRankQiRankKiRankSiRank
A10.9820.9420.9421.9020.942
A20.9250.8950.8951.7950.805
A31.0010.9610.9611.9411.001
A40.9340.8940.8941.8140.824
A50.9730.9330.9331.8730.903
Table 16. Ranking orders of alternatives obtained on the basis of 50 virtual respondents.
Table 16. Ranking orders of alternatives obtained on the basis of 50 virtual respondents.
CrispGrey Approach
AlternativesWSWPWASPASCoCoSoWISPWSWPWASPASCoCoSoWISP
A13333322222
A24444455555
A31111111111
A45555544444
A52222233333
Table 17. Ranking orders of alternatives obtained on the basis of 100 virtual respondents.
Table 17. Ranking orders of alternatives obtained on the basis of 100 virtual respondents.
CrispGrey Approach
AlternativesWSWPWASPASCoCoSoWISPWSWPWASPASCoCoSoWISP
A14444444444
A23333322222
A32222233333
A41111111111
A55555555555
Table 18. Ranking of alternatives on the basis of 150 virtual respondents and crisp methods.
Table 18. Ranking of alternatives on the basis of 150 virtual respondents and crisp methods.
WSWPWASPASCoCoSoWISP
AlternativesSiRankPiRankSiSiKiRankSiRank
A10.99320.96020.96121.84020.9772
A20.97530.94430.94431.80830.9273
A30.97150.93850.93951.79950.9145
A41.00010.96810.96811.85411.0001
A50.97340.94240.94241.80540.9234
Table 19. Ranking of alternatives on the basis of 150 virtual respondents and grey methods.
Table 19. Ranking of alternatives on the basis of 150 virtual respondents and grey methods.
WSWPWASPASCoCoSoWISP
AlternativesSiRankPiRankQiRankKiRankSiRank
A10.98820.95420.95521.80620.9652
A20.98830.95330.95431.80530.9633
A30.98740.95240.95341.80440.9604
A41.00010.96610.96611.82811.0001
A50.98550.95250.95251.80150.9585
Table 20. Ranking orders of alternatives obtained on the basis of 150 virtual respondents.
Table 20. Ranking orders of alternatives obtained on the basis of 150 virtual respondents.
CrispGrey Approach
AlternativesWSWPWASPASCoCoSoWISPWSWPWASPASCoCoSoWISP
A12222222222
A23333333333
A35555544444
A41111111111
A54444455555
Publisher’s Note: MDPI stays neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Share and Cite

MDPI and ACS Style

Stanujkić, D.; Karabašević, D.; Popović, G.; Stanimirović, P.S.; Smarandache, F.; Saračević, M.; Ulutaş, A.; Katsikis, V.N. An Innovative Grey Approach for Group Multi-Criteria Decision Analysis Based on the Median of Ratings by Using Python. Axioms 2021, 10, 124. https://doi.org/10.3390/axioms10020124

AMA Style

Stanujkić D, Karabašević D, Popović G, Stanimirović PS, Smarandache F, Saračević M, Ulutaş A, Katsikis VN. An Innovative Grey Approach for Group Multi-Criteria Decision Analysis Based on the Median of Ratings by Using Python. Axioms. 2021; 10(2):124. https://doi.org/10.3390/axioms10020124

Chicago/Turabian Style

Stanujkić, Dragiša, Darjan Karabašević, Gabrijela Popović, Predrag S. Stanimirović, Florentin Smarandache, Muzafer Saračević, Alptekin Ulutaş, and Vasilios N. Katsikis. 2021. "An Innovative Grey Approach for Group Multi-Criteria Decision Analysis Based on the Median of Ratings by Using Python" Axioms 10, no. 2: 124. https://doi.org/10.3390/axioms10020124

Note that from the first issue of 2016, this journal uses article numbers instead of page numbers. See further details here.

Article Metrics

Back to TopTop