1. Introduction
Let be an n-dimensional pseudo-Riemannian manifold, where the metric g has an arbitrary signature of the form , with . If the signature of g is , meaning that g is positive definite everywhere, then is called a Riemannian manifold.
Let ∇ be the Levi-Civita connection of
, and let
denote the set of all smooth vector fields on
M. A vector field
on
M is said to be affine if its local flow consists of affine transformations. This means, as described in [
1], that
satisfies the following equation:
for all
, where
is the Lie derivative relative to
. The Lie derivative
operates on the Levi-Civita connection ∇ in this manner: for any
, it holds that
In this case, the local flow of
leaves parametrized geodesics unchanged, and it is straightforward to prove that the condition
implies (
1), which means that every Killing vector field is an affine vector field. However, the reverse does not hold.
For discussions on the algebraic and geometric theories of affine vector fields, we refer the reader to [
2]. For the connection between affine vector fields and symmetry theory, the reader may consult [
3]. The investigation of Riemannian manifolds with Killing vector fields has been thoroughly examined in works such as [
4,
5,
6,
7,
8,
9,
10,
11,
12].
Regarding affine vector fields, it has been established that each affine vector field present on a compact Riemannian manifold is indeed a Killing vector field [
13]. Within the framework of non-compact manifolds, Ref. [
14] established that an affine vector field with a bounded length on a complete Riemannian manifold is, in fact, a Killing vector field. Moreover, in [
15], it is demonstrated that on a complete, non-compact Riemannian manifold, any affine vector field possessing a finite global norm is a Killing vector field. Furthermore, in a broader sense, if the Riemannian manifold exhibits non-positive Ricci curvature, then any affine vector field with a finite global norm becomes a parallel vector field.
Inspired by the results presented above, we aim to explore the characteristics of affine vector fields on pseudo-Riemannian manifolds, especially Riemannian ones, offering several novel results of significant geometric and physical relevance. We aim to determine both the necessary and sufficient criteria for classifying an affine vector field as either a Killing or parallel vector field.
The organization of this paper is as follows.
Section 2 presents preliminaries that cover the basic concepts needed. In Lemma 4, we demonstrate that every affine vector field on a pseudo-Riemannian manifold maintains constant divergence.
Section 2 concludes with the introduction of a generalized form of the renowned Bochner formula, which is suitable for pseudo-Riemannian manifolds and will be utilized in the core section of our paper.
Section 3 serves as the principal section of this work, presenting multiple characterization results and verifying key theorems about affine vector fields on Riemannian manifolds. Utilizing our approach, we offer a clear proof that any affine vector field on a compact Riemannian manifold is inherently a Killing vector field. In Theorem 6, we demonstrate that there is not a non-parallel affine vector field on a compact Riemannian manifold with non-positive Ricci curvature. For non-compact Riemannian manifolds, we establish that an affine vector field
on
M, which maintains a constant length and satisfies
, is necessarily parallel. Furthermore, it is shown that any affine vector field
on a compact Riemannian manifold, for which the Hessian of the function
is non-positive, is necessarily a geodesic vector field (refer to Theorem 8). We also provide several essential criteria for identifying an affine vector field as a Killing vector field within a Riemannian manifold. Lastly, we detail the necessary and sufficient conditions for an affine vector field to be parallel in a Riemannian manifold (see Theorems 7, 10, and 11).
2. Preliminaries
For further details on the following concepts, we refer to the classic books [
16,
17]. Let
be an
n-dimensional pseudo-Riemannian manifold, with
, and let ∇ be its Levi-Civita connection. Then, the Riemannian curvature tensor of
is defined as follows:
for all
.
For an orthonormal basis
, the Ricci curvature tensor
is a symmetric
-tensor defined in the following way: For all
, we have
where
.
The divergence of the vector field
X is given as
A divergence-free vector field
X satisfies
, indicating that its local flow maintains volume. Divergence-free vector fields are crucial in electrodynamics, fluid mechanics, and quantum mechanics. Magnetic fields, a significant type of vector fields, are widely used in modern technology, especially in electrical engineering and electromechanics (see [
18]).
Let
f be a smooth function defined on the manifold
M. The gradient of
f, denoted by
, is defined as the vector field on
M satisfying
for any
The Laplacian of
f is defined to be
As is well-known (see, for example, [
19]), if
is a compact Riemannian manifold and
, then
where
is the volume form of
. In particular, for any function
f on
M, it holds that
The Hessian
of the function
f is defined as a symmetric tensor of type
, expressed by the formula
for all
.
The expression for the second covariant derivative of a vector field
Z with respect to the vector fields
X and
Y is given by
The Riemannian curvature tensor satisfies the Ricci identity with the second covariant derivative:
for all
.
In what follows, we introduce the definition of the generalized Frobenius inner product for linear operators, which, although applied here specifically to Riemannian manifolds, can also be extended to any pseudo-Riemannian manifold.
Definition 1. Let be a pseudo-Riemannian manifold. The generalized Frobenius inner product of two linear operators A and B on is defined aswhere denotes the trace of the operators, and represents the transpose of A with respect to the metric g. Specifically, satisfies for all . When
is a Riemannian manifold, the generalized Frobenius norm of a
-tensor
A, denoted by
, is well-defined. In this setting,
is non-negative. To show this (see Lemma 1 below), consider the following decomposition:
where
S is the self-adjoint (or symmetric) part, and
T is the anti-self-adjoint (or skew-symmetric) part of
A.
Since
g is positive definite and
S is self-adjoint (i.e.,
),
S can be diagonalized with respect to an orthonormal local frame at any point on
M. It follows that
where the
denote the eigenvalues of
S.
It follows that the norm of S is well-defined, and we define it as .
On the other hand, as
T is anti-self-adjoint (i.e.,
), its eigenvalues are purely imaginary. If
are the distinct nonzero eigenvalues of
T in an orthonormal local frame, then
T can be diagonalized as
where each nonzero block
takes the form
See for example [
20], p. 627.
It follows that
where
k is the number of nonzero eigenvalues of
T.
Since
, we deduce that
It follows that the norm of T is well-defined, and we define it as .
The following lemma is essential to this paper. It proves, among other things, that the norm of A is well-defined. We will apply it to the particular operator , which is introduced next.
Lemma 1. Let A be a linear operator on a Riemannian manifold , and let S and T be the self-adjoint and anti-self-adjoint components of A, respectively, as defined above. Then, the following identities hold: In particular, the norm of A is well-defined, and we define it as Proof. As a direct consequence of the above, we obtain
which leads to (
8). It is also evident that (9) can be derived in a similar manner. □
The following lemma, which is well-established in the Riemannian setting (see, for instance, [
1], Proposition 2.6, p. 235), characterizes affine vector fields on pseudo-Riemannian manifolds through a simple equation relating the curvature tensor to the second covariant derivative. The proof is standard.
Lemma 2. On a pseudo-Riemannian manifold , a vector field ξ is affine if and only if it fulfills the following equation.for all . Now, let
be a vector field on a pseudo-Riemannian manifold
, and define
as the (1, 1)-tensor (i.e., a linear operator) given by
for all vector fields
.
As before, decompose
as
where
S and
T denote the self-adjoint and anti-self-adjoint components of
, respectively.
The following is Lemma 2 rewritten in terms of the operator
defined in (
10).
Lemma 3. On a pseudo-Riemannian manifold , a vector field ξ is affine if and only if it satisfies the following equation:for all . The following simple lemma highlights an important property of affine vector fields.
Lemma 4. On a pseudo-Riemannian manifold , if ξ is an affine vector field, then is constant.
Remark 1. Since , any affine vector field ξ on a pseudo-Riemannian manifold has a constant divergence. If is a compact Riemannian manifold, then any affine vector field is divergence-free.
Now, we present a generalized version of the renowned Bochner formula, which will be applied in the sections that follow. (See Equation (4.2), p. 536 in [
21]).
Theorem 1. Let be an n-dimensional pseudo-Riemannian manifold. Then, for any the following identity holds: Proof. Consider
as a local orthonormal basis on
M with
, and let
. Taking into account that the above frame is parallel and considering Equation (
5), we obtain the following:
By again considering Equation (
5) and using Ricci identity (
6), we deduce
□
The well-known Bochner formula is a direct consequence of Theorem 1 for Riemannian manifolds. It is important to note that if
is a gradient vector field on a Riemannian manifold
, wher
for some smooth function
f, then the operator
, known as the Hessian operator and related to the Hessian
through the relation (
4), is self-adjoint. Therefore, the norm
is well-defined and will be denoted here as
.
Corollary 1. Let be an n-dimensional Riemannian manifold. If ξ is a gradient vector field on M such that for some smooth function f, then we have Proof. Consider the orthonormal basis
on
M. For
, we obtain
, which has self-adjoint properties, therefore
On the other hand, we have
Additionally, because
is self-adjoint, when
, we obtain
for all
, meaning that
.
Now, Formula (
13) follows by substituting the above quantities into Formula (
12). □
3. Main Results
As mentioned at the start of the introduction, it is worth noting that when the pseudo-Riemannian metric g has the signature , the manifold becomes a Riemannian manifold in the usual sense. Consequently, all the results established earlier for pseudo-Riemannian manifolds can be directly applied to Riemannian manifolds without any ambiguity.
In the Riemannian case, the following result shows that an affine vector field within a Riemannian manifold is described by a straightforward equation that connects the Ricci curvature tensor, the Laplacian of the function , and the operator .
Theorem 2. If ξ is an affine vector field on a Riemannian manifold , then we have Proof. Let
be an affine vector field on a Riemannian manifold
. By Lemma 2, it follows that
for all
.
If we define a function
f by
, we obtain
for all
. It follows that
that is
Now, by using (
15), we obtain
According to Lemma 2, Equation (
16) becomes
Tracing Equation (
17) in the context of an orthonormal basis
on
M, and given that
, it follows that
□
Now, by combining (
12) and (
14), we obtain a very useful formula.
Theorem 3. On a Riemannian manifold , if ξ is an affine vector field, it follows that Theorem 3 leads primarily to the subsequent result, which has been presented in many different forms (see [
14,
22,
23]). We present it here in terms of affine vector fields and give a very short proof.
Theorem 4. On a compact Riemannian manifold, any affine vector field must be a Killing vector field.
Proof. Let
be an affine vector field on the compact manifold
. By integrating Equation (
18) over
M, and using (
2) and (
3), we obtain
Consequently, , implies that is skew-symmetric, or in other words, is a Killing vector field. □
In the case where M might not be compact, a fascinating investigation comes to light. What specific conditions must be satisfied for an affine vector field to qualify as a Killing vector field?
A straightforward implication of Equation (
18) is that on a Riemannian manifold
, if
is an affine vector field with constant length, then
is a Killing vector field if and only if
is divergence-free. In this context, one direction of the following result can also be deduced from Equation (
18).
Theorem 5. On a Riemannian manifold , let ξ be an affine vector field that is also a geodesic vector field (i.e., ). Then, ξ is a Killing vector field if and only if it has constant length.
Proof. Let
be an affine vector filed on
M that is also a geodesic vector field. From Equation (
18), it is evident that if
has constant length, then
is a Killing vector field.
Conversely, suppose
is a Killing vector field. According to a result in [
4], attributed to L. Bianchi [
24], a Killing vector field on a Riemannian manifold is geodesic if and only if it has constant length. Thus,
must have constant length. □
The following theorem guarantees the existence of non-parallel affine vector fields in compact Riemannian manifolds exhibiting non-positive Ricci curvature.
Theorem 6. On a compact Riemannian manifold . Let ξ be an affine vector field. If , then ξ is parallel.
Proof. Since
is affine, by integrating (
14), we get
Since we have assumed that , we deduce that . This implies that , meaning that is a parallel. □
The following result applies even in the case of a Riemannian manifold , where M may not be compact.
Theorem 7. Let ξ be an affine vector field having a constant length on a Riemannian manifold . If , then ξ is a parallel.
Proof. From (
14), we get
which implies that if
then (that is,
is parallel). □
The following result indicates that for an affine vector field , the sign of the Hessian of the function is crucial in characterizing the nature of on a compact Riemannian manifold.
Theorem 8. On a compact Riemannian manifold , let ξ be an affine vector field, and let . If , then ξ is a geodesic.
Proof. By Lemma 2, we have
for all
. Substituting this into (
16), we get
Taking
in the above equation, it follows that
By integrating the above expression, we obtain
and given that
by assumption, it follows that
is zero. Therefore,
must be a geodesic. □
Another result of Theorem 2 is the following theorem, which is Theorem 2 in [
22]. Here, we provide a straightforward proof.
Theorem 9. On a Riemannian manifold , let ξ be an affine vector field. Then, ξ is a Killing vector field if and only if the following holdswhere, according to the decomposition (11), T represents the skew-symmetric part of . Proof. If
is Killing, (
14) simplifies to
Conversely, if (
20) holds, then by using (
14), it follows that
Since , we deduce that , which implies that is a Killing vector field. □
Theorem 10. In a Riemannian manifold , let ξ be an affine vector field, and assume that ξ is a geodesic vector field (that is, ). Then, ξ is parallel if and only if the subsequent inequality holdswhere, according to the decomposition (11), S represents the symmetric part of . In particular, . Proof. Assume that
is a vector field that is affine and geodesic. Then, according to (11) and using the symmetry and the skew-symmetry properties of
S and
T, respectively, it follows from (
15) that we can infer
Conversely, by utilizing the generalized Bochner Formula (
12) with respect to
, taking into account Remark 1, and incorporating (9), we conclude that
Assuming that
, we deduce from (
22) that
, and since
is a geodesic, it follows that
Therefore, from Equation (
21), we deduce that
remains constant. So, from Equation (
14), we infer that
Given our assumption that , it follows that , which implies . Thus, is parallel.
Conversely, if
is parallel, then, because it is also geodesic, consequently
is constant (cf. [
4]). We deduce from (
14) that
. □
The following result extends Theorem 4 from [
22] with additional precision. We provide our proof of this reformulation.
Theorem 11. Let ξ be an affine vector field on a connected Riemannian manifold , and let . Then ξ is a Killing vector field with constant length if and only if and . In this case, , with the equality holding if and only if ξ is a parallel vector field.
Proof. Given that
is a Killing vector field of constant length, as a result, it follows that
and
is geodesic vector fields (see [
4], Proposition 1). Additionally, according to (
19), we have
. Furthermore, given that
has a constant length, it follows that
. Therefore, we deduce from (
14) that
, with equality occurring if and only if
, so,
is parallel.
Conversely, if
and
, then, given that
is spacelike, Equation (
19) implies that the vector field
is geodesic. From (
18), we deduce
. Hence,
, and consequently,
is a Killing vector field. Because
is geodesic, we conclude that
, leading to
, indicating that
has constant length. In this case, by Equation (
22), we find that
with equality holding if and only if
is parallel. □
We will now demonstrate the following characterization of Killing vector fields by utilizing affine vector fields on a Riemannian manifold.
Theorem 12. On a connected Riemannian manifold , an affine vector field ξ is a Killing vector field of constant length if and only if and .
Proof. Suppose that
. It follows from Equation (
19) that
is a geodesic. Given the assumption
, and considering (
22), we deduce that
, establishing that
is a Killing. Because
is geodesic, we conclude that
, leading to
by (
21), which implies that
has a constant length.
On the other hand, if is a Killing vector field with a constant length, it naturally follows that and . □
Remark 2. The concept of a proper affine vector field (as opposed to Killing or homothetic vector fields) is significant. Proper affine vector fields generate a non-trivial, parallel, second-order symmetric tensor (like S), which is directly linked to a splitting of the manifold, in the sense of de Rham and Wu (see [25,26]). This also relates to a skew-symmetric tensor (such as T), which has important algebraic properties. More details can be found in [3].