Next Article in Journal
Influence of Bifilm Defects Generated during Mould Filling on the Tensile Properties of Al–Si–Mg Cast Alloys
Next Article in Special Issue
Effect of Pressure on Densification and Microstructure of W-Cr-Y-Zr Alloy during SPS Consolidated at 1000 °C
Previous Article in Journal
Manufacture of Defined Residual Stress Distributions in the Friction-Spinning Process: Investigations and Run-to-Run Predictive Control
Previous Article in Special Issue
Brazing Tungsten/Tantalum/RAFM Steel Joint for DEMO by Fully Reduced Activation Brazing Alloy 48Ti-48Zr-4Be
 
 
Article

Article Versions Notes

Metals 2022, 12(1), 159; https://doi.org/10.3390/met12010159
Action Date Notes Link
article pdf uploaded. 15 January 2022 10:52 CET Version of Record https://www.mdpi.com/2075-4701/12/1/159/pdf-vor
article xml file uploaded 17 January 2022 12:00 CET Original file -
article xml uploaded. 17 January 2022 12:00 CET Update -
article pdf uploaded. 17 January 2022 12:00 CET Updated version of record https://www.mdpi.com/2075-4701/12/1/159/pdf-vor
article html file updated 17 January 2022 12:02 CET Original file -
article xml file uploaded 18 January 2022 02:26 CET Update -
article xml uploaded. 18 January 2022 02:26 CET Update https://www.mdpi.com/2075-4701/12/1/159/xml
article pdf uploaded. 18 January 2022 02:27 CET Updated version of record https://www.mdpi.com/2075-4701/12/1/159/pdf
article html file updated 18 January 2022 02:28 CET Update -
article html file updated 18 January 2022 10:09 CET Update -
article html file updated 31 July 2022 04:01 CEST Update https://www.mdpi.com/2075-4701/12/1/159/html
Back to TopTop