Next Article in Journal
The Fracture Behavior and Thermal Stability of Commercially Pure Nickel Sheets Processed by Constrained Groove Pressing
Next Article in Special Issue
Comparison of Different Manufacturing Processes of AISI 4140 Steel with Regard to Surface Modification and Its Influencing Depth
Previous Article in Journal
Investigation on the Formation of Cr-Rich Precipitates at the Interphase Boundary in Type 430 Stainless Steel Based on Austenite–Ferrite Transformation Kinetics
Previous Article in Special Issue
The Optimum Process to Produce High-Strength Cast/Forged Al–8%Zn–2.5%Mg–1%Cu Alloy
 
 
Article

Article Versions Notes

Metals 2019, 9(10), 1046; https://doi.org/10.3390/met9101046
Action Date Notes Link
article xml file uploaded 26 September 2019 15:17 CEST Original file -
article pdf uploaded. 26 September 2019 15:17 CEST Version of Record https://www.mdpi.com/2075-4701/9/10/1046/pdf-vor
article xml file uploaded 29 September 2019 08:00 CEST Update -
article xml uploaded. 29 September 2019 08:00 CEST Update https://www.mdpi.com/2075-4701/9/10/1046/xml
article pdf uploaded. 29 September 2019 08:00 CEST Updated version of record https://www.mdpi.com/2075-4701/9/10/1046/pdf
article html file updated 29 September 2019 08:01 CEST Original file -
article html file updated 30 October 2019 14:28 CET Update -
article html file updated 13 February 2020 20:36 CET Update -
article html file updated 20 July 2022 02:40 CEST Update https://www.mdpi.com/2075-4701/9/10/1046/html
Back to TopTop