Next Article in Journal
A Study on the Removal Characteristics and Mechanism of Phosphorus from Simulated Wastewater Using a Novel Modified Red-Mud-Based Adsorption Material
Previous Article in Journal
Effects of Rare Earth Doping on Structural and Electrocatalytic Properties of Nanostructured TiO2 Nanotubes/SnO2-Sb Electrode for Electrochemical Treatment of Industrial Wastewater
 
 
Search for Articles:
Title / Keyword
Author / Affiliation / Email
Journal
Article Type
 
 
Advanced Search
 
Section
Special Issue
Volume
Issue
Number
Page
 
Journals
Separations
Volume 10
Issue 11
10.3390/separations10110561
separations-logo
Submit to this Journal Review for this Journal Propose a Special Issue
► Article Menu

Article Menu

share Share announcement Help format_quote Cite question_answer Discuss in SciProfiles thumb_up
...
Endorse textsms
...
Comment
first_page
settings
Order Article Reprints
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Article

Analysis of Kazakhstan Crude Oil Biomarkers by Gas Chromatography in Combination with Mass Spectrometry

by
Mereke Alimzhanova
1,2 and
Bauyrzhan Abdykarimov
2,*
1
Center of Physico-Chemical Methods of Research and Analysis, Al-Farabi Kazakh National University, 96a, Tole bi Str., Almaty 050012, Kazakhstan
2
Faculty of Physics and Technology, Al-Farabi Kazakh National University, 71, Al-Farabi Ave., Almaty 050040, Kazakhstan
*
Author to whom correspondence should be addressed.
Separations 2023, 10(11), 561; https://doi.org/10.3390/separations10110561
Submission received: 26 September 2023 / Revised: 30 October 2023 / Accepted: 6 November 2023 / Published: 9 November 2023
(This article belongs to the Topic Oil, Gas and Water Separation Research)
Browse Figures
Versions Notes

Abstract

:
Kazakhstan ranks as the 12th largest oil producer globally and boasts a diverse range of crude oils. This research introduces a method for distinguishing between the different types of crude oils based on biomarker analysis of 28 crude oils from Western and Southern Kazakhstan using gas chromatography-mass spectrometry. Biomarkers serve as valuable tools, especially in forensic investigations of oil spills. These biomarkers effectively retain a significant portion of the original natural product’s carbon structure, providing crucial evidence regarding the origin and identity of the oils under examination. This study identifies a set of biomarkers, including pristine, phytane, n-C17 and n-C18 alkanes, hopanes, bisnorhopanes, iso-copalanes, pregnane, androstane, allopregnane, homopregnane, cholestane, and stigmastane. By examining ratios such as pristane/phytane, pristane/n-C17 alkane, tricyclic/pentacyclic terpanes, and hopane, as well as the distribution of steranes, it was deduced that crude oils from West Kazakhstan exhibited resilience to biodegradation. These findings showed that gas chromatography-mass spectrometry is an effective method for oil biomarkers determination, especially because it provides efficient separation and identification. Additionally, this study delved into the origin conditions and maturity of these oils, contributing to a deeper understanding of their characteristics and analysis that is simple to use and available worldwide.

1. Introduction

Kazakhstan is a major oil producer with the second-largest oil reserves and oil production among the former Soviet republics, after Russia, and is 12th on a global scale among oil-producing countries based on production volume [1]. Kazakhstan has produced crude oil since 1911. Throughout the country, 169 hydrocarbon deposits have been discovered comprising 87 oil fields, 17 gas fields, 30 gas and oil, 25 oil-and-gas condensate, and 10 oil condensate fields [2]. The production of crude oil reached a total of 1.77 million barrels/day in 2017. The three main oil fields passing through the Caspian Sea are the Tengiz, Karachaganak, and Kashagan fields, respectively [3].
It is proved that crude oil reserves in Kazakhstan have 30 billion barrels, the 2nd largest endowment in Eurasia after Russia, and the 12th largest in the world after the United States [3].
The Caspian Sea, in addition to Western and Southern Kazakhstan borders, in the Southeast to Turkmenistan, in the South to Iran, in the Southwest to Azerbaijan, and in the Northwest to Russia, constitutes the main transport route for crude oil to other countries. To prove the quality of crude oil knowledge of the origin of the product, as well as information on its chemical composition and physical properties, is crucial [4].
The objective of the present study is to identify crude oil origin partly by studying inherent biomarkers. The decline in the physical properties of crude oil observed in numerous basins is commonly associated with biodegradation, and the extent of this degradation is often identifiable through the features exhibited by the crude oil biomarkers [5]. Further, the results of the present study gain relevance since the transport of crude oils obviously leads to unwanted situations of an oil spill, which calls for analytical methods to identify the origin of the spilled oil and, thus, not least, to make the polluter accountable.
Biomarkers stand as crucial hydrocarbon components within crude oil for chemical fingerprinting. These molecules possess intricate molecular structures inherited from previously living organisms, which seemingly endured without alteration until the present time. Leveraging biomarkers for identifying spilled oils enables the determination of a specific crude oil’s origin. Crude oil fingerprinting technology is the main forensic method for oil spill identification. In comparison with other hydrocarbons, biomarkers have shown to be highly resistant to degradation and may thus disclose the specific origin of the oil due to its unique biomarker fingerprint [6] and then possibly pinpoint the actual polluter.
From an environmental point of view, there is a great complexity in establishing polluters of oil spill accidents [7].
Identifying crude oils through biomarker analysis has significance in the characterization of crude oils. Biomarkers are organic compounds found in crude oil that provide information about its origin, thermal history, and the type of organic matter from which it was formed. These molecular fossils are useful in determining the source rock, maturity, and age of the oil and simple in-use.
Gas chromatography-mass spectrometry in the determination of biomarkers was carried out in the following steps:
  • Sampling: Crude oil samples are collected from different wells or sources for analysis.
  • Extraction and Separation: The crude oil is processed to isolate the organic compounds from the sample with the gas chromatography technique.
  • Identification of Biomarkers: Various biomarkers are identified and analyzed including pristane (Pr), phytane (Ph), n-C17 alkane, n-C18 alkane, terpanes, pregnane, androstane, allopregnane, homopregnane, cholestane, and stigmastane.
  • Analysis and Interpretation: Examining the ratios and distributions of the biomarkers determines the type of source rock (marine, terrestrial), the thermal maturity, and the age of the oil [8,9].
  • Comparative Analysis: The obtained biomarker data are compared to a database of known biomarker profiles of different crude oils to infer the possible origin and characteristics of the analyzed oil sample [10].
This analysis helps in understanding the oil’s characteristics, which is valuable for oil exploration, reservoir management, and production strategies. By determining the source and maturity of crude oil, companies can make informed decisions regarding drilling locations and extraction methods.
So over time, biomarker analyses have developed as the main techniques used in petroleum exploration to study crude oils, their origin, and maturity. In this context, gas chromatography-mass spectrometry (GC–MS) has been widely used as the method of choice for disclosing biomarkers [11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26].
Mass spectrometry has been long recognized as the most powerful detecting method for gas chromatography [27]. Thus, GC-MS is one of the most valuable tools for the identification of unknown compounds. In recent years two-dimensional gas chromatography (GC × GC) has proved its importance for the analyses of complex samples [28,29,30,31]. Hence, GC × GC has also found its application for oil fingerprinting purposes [32]. However, the limitation of this approach, i.e., the excessive dependence on a relatively small number of biomarkers for the characterization of complex fluids such as crude oil, should be emphasized [32,33].
In the literature review, available information on biomarkers in various crude oils determined by gas chromatography-mass spectrometry is summarized. Thus, initial information on the parameters of the GC-MS analyses may be found here [33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63,64].
Despite the long history of oil production in Kazakhstan, petroleum biomarkers with modern methods of analysis have not yet been conducted. Hence, the main objective of the present study is to disclose the biomarker fingerprints for a series of Kazakhstan crude oils applying a GC-MS-based method.

2. Materials and Methods

2.1. Selected Samples

The present study included 28 Kazakh crude oils, each originating from one of the four oil-producing areas in West and South Kazakhstan (Table 1). It should be noted that two samples, Nuraly and Kosshagyl, were chosen to optimize GC-MS parameters.

2.2. Sample Separation

According to the literature review (Appendix A), accurate sample preparation is a crucial component for successful chromatography to ensure the integrity of the sample and removal of impurities that otherwise may be detrimental to the analyses. The sample preparation in the present study included dissolution of the petroleum samples in n-hexane (SupraSolv®, ≥95%; Sigma-Aldrich, Burlington, MA, USA) to remove asphaltenes followed by a column chromatographic fractionation to separate the sample into subsamples of aliphatic and aromatic hydrocarbons, respectively. Based on the literature review (Appendix A), observations used a chromatographic column (length 200 mm × 10.5 mm i.d.) applying silica gel (Sigma-Aldrich, USA), aluminum oxide, and anhydrous granular sodium sulfate oxide (purchased from LLP (Laborpharma), Almaty, Kazakhstan) in a proportion of 2:1:1 was used for the fractionation. Before fractionation aluminum oxide was activated with distilled water (1:1) and dried at 360 °C for 5 h or overnight. The silica gel was washed with acetone (≥96%; LLP (Laborpharma), Almaty, Kazakhstan) and n-hexane and dichloromethane for GC (≥99.9%; Sigma-Aldrich, USA), and was subsequently completely dried in a fume hood at 160–180 °C for 20 h. Glass wool was used as stopper, washed with acetone, hexane, and dichloromethane and dried. Sodium sulfate was calcined and subsequently cooled in a desiccator. A total of 0.1 g of crude oil was weighed and diluted with 10 mL of hexane. Samples (10 mL) of petroleum in n-hexane were applied to the column. The eluents were collected as follows: 12 mL of n-hexane expected to contain the aliphatic hydrocarbons (Fraction 1), followed by 15 mL of n-hexane, and dichloromethane (1:1) to elute aromatic hydrocarbons (Fraction 2).
However, GC MS has limitations in analyzing high molecular weight compounds. It also has highly sensitive capability and is effective in identifying and quantifying the number of compounds. Moreover, the method is simple in use and relatively faster in comparison with other separation techniques.

2.3. GC-MS Parameters for Biomarker Analysis

Determination of biomarkers was carried out by using GC with an MS detector (6890N/5973N; Agilent, Santa Clara, CA, USA) applying a DB-35ms coated capillary column (30 m × 0.25 mm i.d., 0.25 μm film thickness; Agilent, USA). Three oven programs were initially used for the optimization of GC-MS parameters:
  • 60 °C (held for 4 min) to 300 °C by a rate of 10 °C/min and held for 15 min.
  • 50 °C (held for 5 min) to 250 °C by a rate of 10 °C/min, from 250 °C to 300 °C by a rate of 5 °C/min.
  • 50 °C (held for 5 min) to 300 °C by a rate of 20 °C/min and held for 20 min.
Three injector temperatures at 200, 240, and 280 °C, respectively, were used for further optimization of the GC analyses. With an injection volume of 1 µL, the GC was operated in splitless mode. Helium was used as carrier gas with a flow rate of 1 mL/min. The obtained chromatograms were processed using both single ion monitoring (SIM) and scan mode, respectively. The analyses were performed in duplicate, each comprising five replicates. A comparison of the diagnostic ratios was applied to show the most specific biomarker distribution differences between samples.
Eventually, the optimization process pointed at the 3rd oven program and injection temperature 280 °C as being optimal.

3. Results and Discussion

3.1. Optimal GC Parameters

Scrutinizing the literature review (Appendix A) indicated optimal GC parameters for injection, column, and oven temperature programming. Thus, according to the data (Appendix A), splitless injections (1 μL) at 240 °C, 280 °C, and 290 °C, are commonly used by several scientists [32,33,42,48,50]. Further, it not surprisingly appeared that the choice of column apparently is a crucial parameter (for details vide supra).
Figure 1A shows that for Kosshagyl crude oil (Atyrau region) the total peak area of Terpanes (m/z 191) was virtually unaffected by variation in injection temperatures, whereas for Nuraly crude oil (Kyzylorda region) a clear preference for an injection temperature at 280 °C was seen. A further increase in injection temperature may lead to the decomposition of organic substances and as such should be avoided.
Further, the oven temperature program is also an important parameter. According to the literature review (Appendix A), a wide variety of oven programs have been applied in the analyses of biomarkers. Typically, oven programs like (1) 50 °C (2 min)-300 °C, υ = 6 °C/min (15 min); (2) 50 °C (2 min)-310 °C, υ = 6 °C/min (18 min); and (3) 50 °C (1 min)-320 °C, υ = 10 °C/min (8 min), are commonly used for analysis [31,38,53] and appear as illustrative examples.
In the case of the present paper, three different oven programs (cf. Section 2.3.) were used to optimize GC-MS parameters. In Figure 1B, the results of three different oven temperature programs are shown. Again, only minor variations in the terpanes in the Kosshagyl oil were seen as a function of the oven program, while program No. 3 obviously appeared as optimal for the Nuraly oil.
In summary, oven program No. 3 can be considered optimal as all biomarkers were visible at 40 min, whereas programs 1 and 2 apparently do not allow the biomarkers to elude.

3.2. Diagnostic Ratios of Biomarkers

Absolute peak heights of individual biomarkers are typically of limited use as diagnostic tools. Hence, advantageously, the ratios between selected biomarkers are preferred in this respect. The primary advantage of comparing biomarker ratios from different spilled oils and possible suspected source oils is the minimization of concentration effects. Further, this procedure tends to exhibit a self-normalizing effect, thus, minimizing day-to-day, operator, and matrix effects.
Diagnostic ratios can be obtained either from quantitative, i.e., compound concentrations, or semi-quantitative data, i.e., peak areas or heights. It should be emphasized that such diagnostic biomarker ratios constitute defensible indices, e.g., used by environmental chemists for source identification of oil spills [6,65,66].
Based on the literature review (Appendix A), the 28 Kazakhstan crude oil-specific biomarkers, determined by GC-MS, comprised pristane (Pr), phytane (Ph), n-C17 alkane, n-C18 alkane, terpanes, pregnane, androstane, allopregnane, homopregnane, cholestane, and stigmastane. In Table 2 and Figure 2, the MS parameters and molecular structure of selected biomarkers are given.

3.2.1. Pristane/Phytane (Pr/Ph)

The most abundant source of Pr and Ph is the pythyl side chain of chlorophyll. A redox reaction of phytol leads to the formation of Pr and Ph. Thus, cleavage of a phytol side chain to yield phytol is promoted by reducing conditions, which leads to dihydrophytol and then Ph. Oxidic conditions, on the other hand promote the competing conversion of phytol to Pr by the oxidation of phytol to phytenic acid and the decarboxylation to pristine, followed by the reduction to Pr (Figure 3). Hence, by identifying the Pr and Ph, it is possible to indicate the conditions of the deposition environment of where crude oil forms.
Under conditions with low oxygen (reducing or anoxic) in sediments, the phytol side chain tends to break down, resulting in the formation of phytol, which then undergoes a reduction to dehydrophytal and Ph. Conversely, in oxidic conditions, phytol can transform into pristine through a competing process, involving the oxidation of phytol to phytenic acid, the decarboxylation to pristene, and a subsequent reduction to Pr. [67].
In Figure 4, chromatograms of Nuraly and Kosshagyl crude oils are shown, with Pr and Ph being identified using retention time. The detection was conducted in SIM mode at m/z 57.
The Pr/Ph ratio was obtained from the chromatograms (cf. Figure 4A,B) and is for the present study summarized in Table 3. This ratio is one of the most used correlation parameters, which has been used as an indicator for the degree of maturity and deposition environment. Further, Ph is often one of the most abundant isoprenoids in oils and has thus been widely used for estimation of the degree of oil biodegradation in the environment [68].
Pr/Ph ratio is an indicator of the deposition environment. Thus, low Pr/Ph values (<2) indicate aquatic deposition environments including marine, fresh, and brackish water (reducing conditions), whereas intermediate values (2–4) indicate fluviomarine and coastal swamp environments, and high values (up to 10) are related to peat swamp deposition environments (oxidizing conditions) [69]. According to some research [67,70], a Pr/Ph ratio lower than 0.8 in crude oil suggests deposition from anoxic source rocks. Conversely, a Pr/Ph ratio higher than 0.8 implies deposition in oxidic environments. When the Pr/Ph ratio exceeds 3.0, it signifies the presence of terrigenous plant material deposited under oxygen-rich to moderately oxidic conditions. From Table 3 it can be noted that the diagnostic ratios for virtually all Kazakh crude oils were less than 2, strongly indicative of aquatic depositional environments. Crude oils with a somewhat higher Pr/Ph ratio than 2, such as Sarybulak with 3.3, Kyzylkiya with 2.6, and Kumkol, Akshabulak, Aryskum with 2.0, indicated fluviomarine and coastal swamp environments. The ratios of the Pr/Ph for most petroleum samples discussed before in this study were typically high and varied within the range of 0.9 to 2.6 (higher than 0.8) (Table 3) indicating oxidic deposition. Only one sample from the Sorbulak field had a value of 3.3, which indicated that this petroleum was due to terrigenous plant input deposited under oxidic to suboxidic conditions.

3.2.2. Isoprenoides/n-Alkanes Ratios (Pr/n-C17 and Ph/n-C18)

Isopreniodes/n-alkanes (Pr/n-C17 and Ph/n-C18) ratios provide valuable information about the biodegradation properties and maturation of crude oils [70]. Isoprenoid hydrocarbons are generally more resistant to biodegradation than normal alkanes. Thus, the higher the ratio of the Pr to n-alkane C17, or the ratio of Ph to n-alkane C18 is a rough indicator of the relative state of biodegradation.
The Pr/n-C17 ratio serves as a method to distinguish organic matter originating from swamp environments (with values higher than 0.1) and those formed within marine settings (typically less than 0.5). However, it is important to note that this ratio can be influenced by both the maturity level of the material and the extent of biodegradation [71]. The ratio of Pr/n-C17 (Table 3) for the samples ranged from 0.2 to 0.5 for South Kazakhstan region samples (more than 0.1 and less than 0.5), indicating organic matter from a swamp and marine environment of deposition also (unless Konys—0.6).
According to the analysis (Table 3) of oils selected from West Kazakhstan, the origin of the oil is significantly different, with a ratio of Pr/n-C17 from 0.2 to 4.1. The high Pr/n-C17 ratio (>1.0) in crude oil is evidence that terrigenous plant contribution played a major role in its origin [72]. The ratio of Pr/n-C17 (Table 3, Figure 5) for the crude oils from Akkudyk, Prorva, Tengiz, Dossori, and Kashagan (less than 1) indicated a marine environment of deposition, but other oils from Atyrau region (Samples—№ 4, 5) originated from a typical type III (terrigenous).
Ph/n-C18 values less than 1.0 are indicative of non-biodegraded oils [67]. From the results (Table 3), Ph/n-C18 ratios found in the range from 0.10 to 6.3 were seen. Most crude oils (20 samples) were recorded with a Ph/n-C18 less than one (<1.0), suggesting that these samples were non-biodegraded.
The diagram (Figure 5) shows that West Kazakhstan region crude oils have different maturation and biodegradation. The cross-plot of Pr/n-C17 against Ph/n-C18 for the Atyrau region oils samples showed that part of the samples (1, 3–5, 8) consisted of terrestrial organic matter inputs and other parts of samples showed clear marine source organic matters deposited. The cross-plot of Pr/n-C17 against Ph/n-C18 for the crude oils from the Mangystau (Figure 5) and South Kazakhstan (Figure 6) regions showed mixed organic matter (source or transitional environment).
Figure 5 and Figure 6 display plots of Pr/n-C17 vs. Ph/n-C18, disclosing the depositional environment of the oils. Thus, comparing to the data in Table 3, it can be concluded that 8 samples of crude oils from West Kazakhstan, i.e., Akingen, Baichunas, Balgimbaev, Buzachi, Karamandybas, Karazhambas, Kosshagyl, and Zhanatalap, were less resistant to biodegradation in contrast to crude oils from South Kazakhstan that apparently were the most resistant.

3.2.3. Sterane Distribution (m/z 217 and 218)

The mass chromatograms of m/z 217 and 218 ions display the distribution of steranes in crude oil samples, with steranes being the preferred biomarkers for assessing maturity. [71]. Ratios based on varying carbon numbers within the C27–C29 steranes range were employed to identify distinctions in sources. It is widely accepted that the proportions of C27–C29 steranes serve as indicators of source disparities. Elevated levels of C29 steranes are associated with organic matter primarily influenced by higher plant inputs, whereas greater proportions of C27 steranes are characteristic of marine-derived organic matter [71,73].
As it is shown in Figure 7, the Akingen, Baichunas, Prorva, and Zhanatalap crude oils displayed insignificant dominance of C27, only indicative of the source of these crude oils being terrestrial plants mixed with marine microorganisms. Several West crude oils showed a prominence of C29, which indicated more input of organic matter with higher plant inputs. Figure 5 indicates that the crude oils from Karazhanbas and Zhanatalap originated between mixed terrestrial and marine organic sources, while Figure 6 has a higher terrestrial plant sources input. In the case of crude oils from South Kazakhstan, all crude oils showed dominance of C29 indicative of organic matter with higher plant inputs (Figure 8). These results of sterane analysis were similar with the data gained from the ratios of Pr/n-C17 and Ph/n-C18 (Figure 6).

3.2.4. Tricyclic/Pentacyclic Terpanes (m/z 191)

Tricyclic terpanes are commonly found in marine sources and are used as a maturity indicator. The origin of tricyclic terpanes is from algae and bacteria or higher plants. They are present in oils in different concentrations relative to pentacyclic terpanes [67,68]. Their presence in oils varies in terms of concentration compared to pentacyclic terpanes. Various types of deposition environments have shown that C23 tricyclic terpanes are often dominant in marine-sourced oils while C19 and C20 members are more abundant in oils of terrestrial origin. In highly matured oils, the distribution of tricyclic terpanes is dominated more than in oils of low maturation [67,68,74]. Figure 9 contains information about the maturity of Kazakhstan crude oils. The higher the signal of the ratio of tricyclic/pentacyclic terpanes, the more mature a crude oil will be considered.
The studied crude oils sampled from Western Kazakhstan showed the highest tricyclic/pentacyclic terpanes ratios from 0.2 to 2.3. Thus, Western Kazakh oils are more mature than South Kazakh oils where ratios in the range from 0.02 to 0.15 were found.

4. Conclusions

For the first time, the petroleum biomarkers in Kazakhstan crude oils have been determined by applying optimized chromatographic parameters for sample injection and oven temperature programming. In addition, the sample preparation method was optimized.
Based on biomarker ratios it was concluded that virtually all Kazakh crude oils were formed under reducing conditions; only two oils, Kyzylkiya and Sarybulak, apparently were formed in an oxidizing environment. Crude oils from South Kazakhstan deposits are more resistant to biodegradation and weathering conditions than oils from West Kazakhstan deposits.
An indicator of source difference is shown in the Akingen, Baichunas, Balgimbaev, and Prorva crude oils where the C29 steranes dominate, strongly indicating that the source of these crude oils is terrestrial plants mixing with marine microorganisms. Far West crude oils showed a prominence of C29, indicating an increased input of plant organic origin, while crude oils from South Kazakhstan showed a prominence of C29 steranes.
Crude oils from West Kazakhstan are more mature and, thus, older than oils from South Kazakhstan.

Author Contributions

Conceptualization, M.A.; methodology, B.A.; software, B.A.; validation, B.A.; formal analysis, B.A.; investigation, B.A.; data curation, B.A.; writing—original draft preparation, B.A.; writing—review and editing, M.A.; visualization, B.A.; supervision, M.A.; project administration, M.A. All authors have read and agreed to the published version of the manuscript.

Funding

This research received no external funding.

Data Availability Statement

The authors declare that all statistical data supporting this study are available within the paper or cited in references.

Conflicts of Interest

The authors declare no conflict of interest.

Appendix A

Table A1. Literature review of related topics.
Table A1. Literature review of related topics.
№AnalytesSample PreparationMethodParameters of GCCountryRef.
1Hopanes, nor- hopanes, and steranesDeasphalte samples in n-heptane.
Saturated fraction by LC (alumina/silica + n-heptane).		GC-QMSDB-5ms (60 m × 0.25 mm × 0.25 μm);
Oven program: 70–110 °C, υ = 50 °C/min; υ = 5 °C/min to 295 °C.		France[33]
2Bicyclic alkanes, pentacyclic terpanes, and steranesDeasphalte in n-heptane
(reflux for 2 h with 100 mL of n-heptane for 2.5 g of crude oil).
Column chromatography “aliphatic + aromatic” fraction.		GC-QMSDBI (60 m × 0.32 mm × 0.25 μm);
Oven program: for hopanes; 70–295 °C υ = 5 °C/min (15 min); Oven program: for steranes: 70–180 °C, υ = 10 °C/min, υ = 2 °C/min to 295 °C (25 min)		Brazil[34]
3Terpanes and SteranesCrude oil (0.5 g) in 5 mL of n-pentane.
Filter the supernatant using a syringe-operated (0.5 mm)
Silica column + 2–3 mL of n-pentane.
Concentrate the n-pentane fraction under a dry nitrogen jet to 0.5 mL and store for further analysis.		GC-MSDB-5 (30 m × 0.32 mm × 0.25 μm);
T(inj) 290 °C; Oven program: 50 °C (2 min)-300 °C, υ = 60 °C/min, 300 °C (18 min)		Kuwait[35]
4Terpanes and steranesAlumina + n-hexane (saturated fraction).GC-MSSE-52 (60 m × 0.25 mm); T(inj) = 250 °C; Oven program: 40–300 °C υ = 3 °C/minSpain[36]
5Stigmastane and
hopanes		10 g soil sample + silica column.
Extract acetone + hexane (1:1) and a ratio of 1:2 (wt/vol) of solid to solvent.
Shake 5 min, sonicate 15 min, shake 5 min, centrifuge 5 min.
Fractionation (silica + hexane).		GC-MSHP-5 (30 m × 0.25 mm × 0.25 μm);
T(Inj) = 290 °C; Oven program: 40 °C (2 min)-140 °C, υ = 5 °C/min, υ = 10 °C/min to 300 °C (10 min)		Italy[37]
6Hopanes and steranesColumn chromatography 24–32 mg crude oil.
The aliphatic fraction (n-hexane).
The non-aliphatic fraction (dichloromethane and methanol (3:1, v:v).
Concentrate in a stream of nitrogen, re-dissolve in 1 mL of n-hexane.		GC-QMSZB-5 (30 m × 0.25 mm × 0.1 µm);
T(inj)-50 °C (0.2 min)-320 °C, υ = 150 °C/min (5 min); Oven program: for aliphatic fraction: 60 °C (4 min)-300 °C υ = 10 °C/min, 300 °C (15 min); Oven program: for non-aliphatic fractions: 80 °C (5 min)-370 °C υ = 10 °C/min, 370 °C (10 min)		Sweden[38]
7Hopanes and steranesLC (saturated and aromatic hydrocarbons).GC-FID
GC-MS		SPB-1 (60 m × 0.53 mm); Oven program: 100–320 °C (20 min), υ = 3 °C/min.
SE-54 (50 m × 0.25 mm); Oven program: 100–310 °C, υ = 4 °C/min.		Egypt[39]
8Hopanes, steranes, diasteranes, and triaromatic steroidsWater and sediment extracted of crude oil samples.
Light-protected and stored at 4 °C until analysis 20–50 mg in 5 mL of CH2Cl2.		GC-MSHP-5MS (60 m × 0.25 mm × 0.25 μm);
T(Inj) = 300 °C; Oven program:
40 °C (1 min) to 300 °C, υ = 6 °C/min (30 min)		Spain[40]
9Sterane and tricyclic and pentacyclic terpanes (hopanes) biomarkersDissolve samples (1.6 mg) in 320 μL hexane.GC-MS-MSTR-1MS (60 m × 0.25 mm × 0.25 µm);
T(inj) = 260 °C; Oven program: 50 °C (2 min)-150 °C υ = 20 °C/min, υ = 1.5 °C/min to 310 °C (17 min)		Germany[41]
10Dibenzothiophene, and hopanes, steranesDissolve in hexane 10 times
Extract crude oil 100 mg in 10 mL of hexane using sonication.
Centrifuge
Dilute 10 times (1 mg/mL)		GC-QTOFDB-5ms (30 m × 0.25 mm × 0.25 μm);
Oven program: 50 °C (1 min)-320 °C (8 min) υ = 10 °C/min		Belgium, USA[42]
11Terpanes and steranesPrecipitate asphaltenes with n-heptane in a 1:40 v/v ratio.
Separate into saturated, aromatic, and resin fractions by LC.
Elute using a column filled with silica-alumina (aliphatics/n-hexane; aromatics/toluene;resins/toluene/methanol (70:30 v/v)).		GC-MSHP-5ms (30 m × 0.25 mm);
Oven program: 260–280 °C υ = 4 °C/min		Venezuela[43]
12Adamantanes and their derivativesOils were applied on a platinum tape and were subjected to thermal desorption at 350 °C for 20 s.GC-MSHP-5ms (30 m × 0.25 mm × 0.25 μm);
Oven program: 40 °C (4 min)-290 °C (10 min) υ = 5 °C/min.		Russia[44]
13Hopane and steranePlace samples in 40 mL clear vials.
25 mg oil in 10 mL hexane.
Add 0.5 g of Chem-Tube-Hydromatrix and vortex the samples for 5 min and allow to settle at room temperature for 4 h.
Filter and separate in silica gel.
Vortex for 2 min and allow to settle for 2 min.		GC-MSHopane analysis: DB-EUPAH (20 m × 0.18 mm × 0.14 μm); Oven program: 50 °C (2 min)-310 °C (15 min) υ = 6 C/min. T(inj) = 280 °C; m/z 191.
Sterane analysis: HP-5ms (60 m × 0,25 mm × 0.25 μm); Oven program: 50 °C (1 min)-150 °C (2 min) υ = 70 °C/min, υ = 5 °C/min to 310 °C (15 min).		USA[45]
14Saturated hydrocarbons, Steranes and terpanes, 25-Norhopanes, Aromatic hydrocarbons, and Triaromatic steroid hydrocarbonsRemove asphaltenes with n-hexane followed by filtration.
Separate into saturate, aromatic, and polar fractions (silica and alumina (4:1, v/v) + n-hexane, Dichloromethane, and methanol, respectively).		GC-MSHP-5 (30 m × 0.25 mm × 0.25 μm);
Oven program: 80 °C (1 min)-280 °C (30 min) υ = 3 °C/min		China[46]
15Triterpanes oleananes, bicadinanes, hopanes, and steranesPrecipitate asphaltenes with n-hexane 50 times.
Separate maltenes into saturated hydrocarbons, aromatic hydrocarbons, and resins fraction
Remove n-alkanes from saturated fraction		GC-QMSRtx-5 (30 m × 0.25 mm × 0.25 μm);
T(inj) = 300 °C; Oven program: 100 °C (3 min)-200 °C υ = 25 °C/min, υ = 2 °C/min to 300 °C (3 min)		India[47]
16Hopanes, steranes and diasteranes, and
triaromatic steroids biomarkers		Oil samples were water and sediment extracted following an ASTM D2709—16 guide, light-protected, and stored at 4 C until analysis.GC-MSHP-5ms (60 m × 0.25 mm × 0.25 μm);
Oven program: 40 °C (1 min)-300 °C, υ = 6 °C /min (30 min), Tinj. = 300 °C. 		Spain[48]
17Hopanes and steranes and terpanesBitumen extractions were performed on 56 samples using a Soxhlet apparatus for 72 h with a dichloromethane/methanol mixture (93:7 v/v).GC-MSHP-5ms (30 m × 0.25 mm × 0.25 μm);
Oven program: 50 °C (1 min)-100 °C, υ = 20 °C/min, 100-310 °C, υ = 3 °C/min (18 min)		China[49]
18Hopanes, steranesThe oil samples were deasphaltened by hexane. Then fractionated on a silica: alumina column using hexane, benzene, and methanol.GC-MSHP-5ms (60 m × 0.25 mm × 0.25 mm);
Oven program: 50 °C (1 min)-120 °C, υ = 20 °C/min, 120-250 °C, υ = 4 °C/min, to 310 °C (3 °C/min, 30 min)		China[50]
19Hopanes, steranesExtract by chloroform for 72 h by means of Soxhlet extraction.GC-MSHP-5 (30 m × 0.25 mm × 0.25 μm);
T(inj) = 280 °C; Oven program: 80–290 °C at 4 °C/min (30 min)		China[51]
20Isoprenoid, Moretanes, Bisnorhopanes, Gammacerane, Pentacyclic extended hopaneSeparated into saturate, aromatics and resins by column chromatography (1:1 alumina:silica gel).
Elution with n-heptane, toluene, and chloroform.		GC-FID
GC-QMS		SPB-1 (60 m × 0.53 mm);
Oven program: 100–320 °C at 3 °C/min (20 min).
SE 54 (50 m × 0.25 mm)
Oven program: 100–310 °C at 4 °C/min		Egypt[52]
21Phenanthrene, anthracene, methyl-phenanthrene,
methyl-anthracene		Extract 0.15 g oil samples with 10.0 mL n-hexane/dichlormethane (1:1, v/v), add about 1.00 g of anhydrous sodium sulfate.
Vortexed for 30 s.
Centrifuge at 3000 r.p.m. 5 min.
Transfer 1.0 mL of the supernatant to a vial (silica gel. + n-hexane/dichloromethane (1:1, v/v).
Vortex and centrifuge an aliquot of 1.0 mL analysis.		GC-MSHP-5MS (60 m × 0.25 mm × 0.25 μm);
T(inj)= 290 °C; Oven program: 60–300 °C υ = 6 °C/min (30 min).		China[53]
22n-alkanes, isoprenoids, and steranes and triterpanesThe samples were fractionated into saturated hydrocarbons, aromatic hydrocarbons, and polar compounds by column chromatography.
For aliphatic fraction: hexane.
For aromatic fraction: 1:1 (v/v) hexane/dichloromethane.		GC-MS-MSZB-5 (30 m × 0.25 mm × 0.10 μm);
Oven program: 70–100 °C (30 °C/min)
100–308 °C (4 °C/min, 8 min)		Serbia[54]
23Pentacyclic terpanesOil samples were mixed with a solution of dichlormethane.GC-MSDB-5 (30 m × 0.25 mm × 0.25 μm);
Oven program: 50–300 °C, (5 °C/min, 20 min)		Germany[55]
24Steranes, diasteranes, and pentacyclic triterpanesThe crude oils were diluted in dichloromethane prior to analysis.GC-MSMXT-5 (60 m × 0.25 mm × 0.25 μm);
Tinj. = 300 °C; Oven program: 50 °C (3 min)-150 °C υ = 20 °C/min
150–350 °C, (2 °C/min, 25 min)		Mexico[56]
25Terpanes and steranes, bicyclic sesquiterpanes, and diamondoids16 mg of each oil in hexane.
The oil solution was mixed with 100 mL of o-terphenyl and d50-tetracosane (200 mg/mL each) and 100 mL of mixture of deuterated naphthalene, acenaphthene, phenanthrene, benz[a]anthracene, and perylene (10 mg/mL each).		GC-MSDB-5ms (30 m × 0.25 mm × 0.25 μm);
Oven program: 50 °C (2 min)-310 °C
υ = 6 °C/min (18 min)		Canada[57]
26Steranes and terpanesOil samples were extracted in a Soxhlet extractor using dichloromethane (DCM): methanol (93:7, v:v) for 72 h.
Separated into maltene and asphaltene fractions using a deasphaltening procedure.		GC-MSHP-1 (30 m × 0.25 mm × 0.25 μm);
Tinj. = 300 °C; Oven program: 40–300 °C, υ = 4 °C/min (20 min)		China[58]
27Pristanes and phytanesA total of 461 samples were subjected to bulk geochemical analysis.GC-MSRTX-1 (30 m × 0.32 mm × 0.25 μm);
Oven program: 60-320 °C, υ = 4 °C/min		Colombia[59]
28Sterane, terpane, and aromatic biomarker distributionsOil samples were subjected to asphaltene precipitation using excess n-hexane.
The maltene was fractionated into saturated and aromatic hydrocarbons by column chromatography with activated silica gel using hexane, dichloromethane, and dichloromethane/methanol (50:50).		GC-MSJ&W DB5 (50 m × 0.2 mm × 0.11 µm);
Oven program: 150–325 °C, υ = 2 °C/min		Egypt[60]
29Tricyclic terpanes, gammacerane, dibenzothiophene, steranes, and diasteranes,The oils were deasphalted using n-hexane, and fractionated using column chromatography.GC-MSHP-5MS (30 m × 0.25 mm × 0.25 μm);
Oven program: 50 °C (1 min)-120 °C, υ = 20 °C/min, 120–310, υ = 3 °C/min (25 min)		China[61]
3017 adamantanes, 10 bicyclic sesquiterpanes, 37 terpanes, and 17
steranes		2 g soil sample was spiked with acenaphthene-d10 the extracted sample solution was filtered and eluted with n-hexane and then concentrated to 1 mL.
Eluted with n-hexane, mixed n-hexane/dichloromethane, dichloromethane.
Concentrated and refreshed with cyclohexane.		GC-MSHP-5 (30 m × 0.25 mm × 0.25 μm);
Oven program: 50 °C (2 min)-300 °C, υ = 6 °C/min (15 min)		China[62]
31High C26/C25 tricyclic terpanes, low C31 homohopane, 4α-methyl-24-ethylcholestanes, and C30 tetracyclic polyprenoidsThe oil samples were spiked with standard compound 5α-androstane and n-Hexane—to remove asphaltenes by ultrasound and centrifugation.
Saturate and aromatic fractions were separated by activated silica gel/alumina column chromatography using n-hexane and n-hexane: dichloromethane (2:1, v/v).		GC-MSHP-5MS (30 m × 0.25 mm × 0.25 μm);
Tinj. = 300 °C; Oven program: 50 °C (2 min)-200 °C, υ = 4 °C/min, 200–310 °C
υ = 2 °C/min (10 min)		China[63]
3217.alfa., 21β-28, 30-Bisnorhopane, 28-Nor-17β(H)-hopane, 15-Isobutyl-(13αH)-isocopalane, Pregnane, Androstane, (5α)-, Androstane, (5β)-, Allopregnane, D-Homopregnane, (5α)-, Cholestane, and StigmastaneCrude oil samples dissolved in n-hexane by column chromatography to the fractions of saturated and aromatic hydrocarbons.
The silica gel is washed with acetone, hexane, and dichloromethane, completely dried, and activated at 160–180 °C for 20 h.
The glass wool is washed with acetone, hexane, and dichloromethane.
Sodium sulfate is calcined and cooled.
10 mL of crude oil. The eluents were collected as follows: 12 mL of hexane for saturated hydrocarbons (Fraction 1), 15 mL of hexane: dichloromethane for aromatic hydrocarbons (v/v, 1:1, Fraction 2).		GC-MSDB-5ms (30 m × 0.25 mm × 0.25 μm);
Tinj = 280 °C; Oven program: 50 °C (held for 5 min) to 300 °C by a rate of 20 °C/min and held for 20 min.		Kazakhstan[this article]

References

  1. Data Portal IndexMundi. Available online: https://www.indexmundi.com/g/r.aspx?v=88&t=20 (accessed on 15 September 2023).
  2. Kantarbayeva, A. Oil and Gas of Kazakhstan: Some Economic and Geopolitics Aspects. AlPari, January 2000. Available online: https://www.researchgate.net/publication/279997005_Oil_and_Gas_of_Kazakhstan_Some_Economic_and_Geopolitics_Aspects(accessed on 15 September 2023).
  3. U.S. Energy Information Administration. Country Analysis Brief: Kazakhstan. 2019. Available online: https://www.eia.gov/beta/international/analysis.php?iso=KAZ (accessed on 15 September 2023).
  4. Peters, K.E. The Biomarker Guide. In The Biomarker Guide, 1st–2nd ed.; Cambridge University Press: New York, NY, USA, 2006; Volume 1–2, p. 1155. [Google Scholar] [CrossRef]
  5. Wang, M.; Liu, S.; Li, J.; Gao, G.; Mi, J.; Li, E. Special Distribution of Crude Oil in the Lucaogou Formation in Jimusaer Sag and Genetic Analysis of Its Physical Difference. Hindawi Geofluids 2021, 2021, 6660079. [Google Scholar] [CrossRef]
  6. Alimzhanova, M.; Sergazina, M. Ecology monitoring of soil contaminated with petroleum by modern techniques of analysis. Int. Multidiscip. Sci. GeoConference SGEM 2015, 2, 157–163. [Google Scholar]
  7. Stout, S.A.; Wang, Z. Standard Handbook Oil Spill Environmental Forensics; Academic Press: New York, NY, USA, 2007. [Google Scholar]
  8. Aitkeldiyeva, S.A.; Faizulina, E.R.; Tatarkina, L.G.; Alimzhanova, M.B.; Daugaliyeva, S.T.; Auezova, O.N.; Alimbetova, A.V.; Spankulova, G.A.; Sadanov, A.K. Degradation of petroleum hydrocarbons with thermotolerant microorganisms. Rasayan J. Chem. 2020, 13, 1271–1282. [Google Scholar] [CrossRef]
  9. Faizulina, E.R.; Aitkeldiyeva, S.A.; Tatarkina, L.G.; Alimzhanova, M.B.; Auezova, Î.N.; Daugaliyeva, S.T.; Alimbetova, A.V.; Spankulova, G.A.; Sadanov, A.K. Pahs-degrading bacteria isolated from oilcontaminated soil of Western Kazakhstan. Ecol. Environ. Conserv. 2020, 26, 648–653. [Google Scholar]
  10. Zou, X.; Fan, X.; Chen, G.; Xu, T.; Ma, C. Geochemical Analysis of a Multi-Layer Hydrocarbon Reservoir in the Wuerhe Area, Junggar Basin. Appl. Sci. 2022, 12, 3871. [Google Scholar] [CrossRef]
  11. Alimzhanova, M.; Adilbekov, E.; Kapar, A.; Sagandykova, G.; Ashimuly, K. A stationary phase for solid-phase extraction based on natural nanomaterial shungite. Int. Multidiscip. Sci. GeoConference Surv. Geol. Min. Ecol. Manag. SGEM 2016, 2, 17–24. [Google Scholar]
  12. Li, E.; Li, Y.; Xiang, B.; Hou, D.; Mi, J.; Han, X.; Zhang, Y.; Gao, X. Chemometric Classification and Geochemistry of Crude Oils in the Eastern Fukang Sag, Junggar Basin, NW China. Energies 2022, 15, 8921. [Google Scholar] [CrossRef]
  13. Ivanov, K.S.; Erokhin, Y.V.; Kudryavtsev, D.A. Inorganic Geochemistry of Crude Oils of Northern Eurasia after ICP-MS Data as Clear Evidence for Their Deep Origin. Energies 2022, 15, 48. [Google Scholar] [CrossRef]
  14. Tomas, G.J.; Acuna, A.J. Study of petroleum biomarkers from the weathering of a crude oil in seawater. Rev. Int. Contam. Ambient. 2023, 39, 71–84. [Google Scholar] [CrossRef]
  15. Akhmedova, A.R.; Serebrennikova, O.V.; Shiganova, O.V. Saturated and Aromatic Hydrocarbons Biomarkers in Crude Oil and Bitumens from Kugas 364-0 Parametric Well (Sakha (Yakutia) Republic, Russia). Pet. Chem. 2023, 63, 82–92. [Google Scholar] [CrossRef]
  16. Chua, C.C.; Brunswick, P.; Kwok, H.; Yan, J.; Cuthbertson, D.; van Aggelen, G.; Helbing, C.C.; Shang, D. Enhanced analysis of weathered crude oils by gas chromatography-flame ionization detection, gas chromatography-mass spectrometry diagnostic ratios, and multivariate statistics. J. Chromatogr. A 2020, 1634, 461689. [Google Scholar] [CrossRef] [PubMed]
  17. Alimzhanova, M.B.; Abilev, M.B.; Kuandykova, M.M.; Kenessov, B.N.; Kamysbayev, D.K. Rapid Screening Method for the Total Petroleum Hydrocarbons in Water Samples by Solid-Phase Microextraction and GC-MS. Eurasian Chem.-Technol. J. 2012, 14, 177–182. [Google Scholar] [CrossRef]
  18. Alimzhanova, M.B.; Kenessov, B.N.; Nauryzbayev, M.K.; Koziel, J.A. Effects of moisture content and solvent additive on headspace solid phase microextraction of total petroleum hydrocarbons from soil. Eurasian Chem.-Technol. J. 2012, 14, 331–335. [Google Scholar] [CrossRef]
  19. Mereke, A.; Meruyert, S.; Yerlan, A.; Saniya, A. Optimization of the sample preparation parameters in crude oil analysis. Int. Multidiscip. Sci. GeoConference SGEM 2015, 17, 729–736. [Google Scholar] [CrossRef]
  20. Walters, C.C.; Wang, F.C.; Higgins, M.B.; Madincea, M.E. Universal Biomarker Analysis: Aromatic hydrocarbons. Org. Geochem. 2018, 124, 205–214. [Google Scholar] [CrossRef]
  21. Kayukova, G.P.; Gordadze, G.N.; Nigmedzyanova, L.Z.; Kiyamova, A.M.; Romanov, A.G.; Zaripova, S.K.; Naumova, R.P. Genesis of biomarker hydrocarbons in the environment and their role in the determination of crude oil contamination source. Pet. Chem. 2006, 46, 3–10. (In Russian) [Google Scholar] [CrossRef]
  22. Giruts, M.V.; Gordadze, G.N.; Koshelev, V.N.; Stroeva, A.R. Modelling of petroleum biomarker-hydrocarbons formation process using thermolysis and thermocatalysis of plant biomass. Pet. Chem. 2014, 54, 352–359. (In Russian) [Google Scholar]
  23. Bogatyrev, S.O.; Giruts, M.V.; Gordadze, G.N.; Koshelev, V.N.; Stokolos, O.A.; Stroeva, A.R. Generation of hydrocarbons of diamond-like structure from plant biomass. Chem. Technol. Fuel Oils 2014, 4, 15–20. (In Russian) [Google Scholar]
  24. Giruts, M.V.; Gordadze, G.N.; Morozov, O.N.; Romanov, A.G.; Tihomirov, V.I. Identification of crude oils of Samar region by their biomarker composition. Pet. Chem. 2010, 50, 424–430. (In Russian) [Google Scholar]
  25. Badmayev, C.M.; Giruts, M.V.; Gordadze, G.N.; Koshelev, V.N.; Stokolos, O.A.; Erdnieva, O.G. Identification of triamantanes in crude oils. Pet. Chem. 2012, 52, 83–85. (In Russian) [Google Scholar]
  26. Petrov, A.A. Biomarkers and geochemical conditions of crude oil formation in Russia. Geol. Oil Gas 1994, 6, 13–18. (In Russian) [Google Scholar]
  27. Dalluge, J.; Beens, J.; Brinkman, U.A.T. Comprehensive two-dimensional gas chromatography: A powerful and versatile analytical tool. J. Chromatogr. A 2003, 1000, 69–108. [Google Scholar] [CrossRef] [PubMed]
  28. Ruby, C.Y.; Marriott, P.J. Review of the Basic Concepts of Comprehensive Two-Dimensional Gas Chromatography. J. Chromatogr. Sci. 2002, 40, 276–291. [Google Scholar]
  29. Gorecki, T.; Harynuk, J.; Panic, O. The evolution of comprehensive two-dimensional gas chromatography (GC×GC). J. Sep. Sci. 2004, 27, 359–379. [Google Scholar] [CrossRef] [PubMed]
  30. Edwards, M.; Mostafa, A.; Gorecki, T. Modulation in comprehensive two-dimensional gas chromatography: 20 years of innovation. Anal. Bioanal. Chem. 2011, 401, 2335–2349. [Google Scholar] [CrossRef]
  31. Gaines, R.B.; Frysinger, G.S.; Reddy, C.M.; Nelson, R.K. Oil Spill Environmental Forensics; Academic Press: Cambridge, MA, USA, 2007; Volume 169. [Google Scholar]
  32. Ventura, G.T.; Hall, G.J.; Nelson, R.K.; Frysinger, G.S.; Raghuraman, B.; Pomerantz, A.E.; Reddy, C.M. Analysis of petroleum compositional similarity using multiway principal components analysis (MPCA) with comprehensive two-dimensional gas chromatographic data. J. Chromatogr. A 2011, 1218, 2584–2592. [Google Scholar] [CrossRef]
  33. Aguiar, A.; Silva, A.I.; Azevedo, D.A.; Aquino, F.R. Application of comprehensive two-dimensional gas chromatography coupled to time-of-flight mass spectrometry to biomarker characterization in Brazilian oils. Fuel 2010, 89, 2760–2768. [Google Scholar] [CrossRef]
  34. Pieri, N.; Jacquot, F. GC-MS identification of biomarkers in road asphalts and in their parent crude oils. Relationships between crude oil maturity and asphalt reactivity towards weathering. Org. Geochem. 1996, 25, 51–68. [Google Scholar] [CrossRef]
  35. Jacquot, F.; Doumenq, P. Biodegradation of the (aliphatic + aromatic) fraction of Oural crude oil. Biomarker identification using GC/MS SIM and GC/MS/MS’. Talanta 1996, 43, 319–330. [Google Scholar] [CrossRef]
  36. Hauser, A.; Dashti, H.; Khan, Z.H. Identification of biomarker compounds in selected Kuwait crude oils. Fuel 1999, 78, 1483–1488. [Google Scholar] [CrossRef]
  37. Galarraga, F.; Marquez, G.; Reategui, K. Comparative study of crude oils from the Machete area in the Eastern Venezuelan Basin by pyrolysis of asphaltenes. J. Anal. Appl. Pyrolysis 2007, 80, 289–296. [Google Scholar] [CrossRef]
  38. Gagni, S.; Cam, D. Stigmastane and hopanes as conserved biomarkers for estimating oil biodegradation in a former refinery plant-contaminated soil. Chemosphere 2007, 67, 1975–1981. [Google Scholar] [CrossRef]
  39. Siljeström, S.; Hode, T.; Lausmaa, J.; Sjövall, P. Detection of organic biomarkers in crude oils using ToF-SIMS. Org. Geochem. 2009, 40, 135–143. [Google Scholar] [CrossRef]
  40. Roushdy, M.; Nady, M.; Mostafa, Y.; Gendy, N.; Ali, H. Biomarkers Characteristics of Crude Oils from some Oilfields in the Gulf of Suez, Egypt. J. Am. Sci. 2010, 6, 911–925. [Google Scholar]
  41. Fernández-Varela, R.J.M.; Andrade, S.; Muniategui, D.P. Selecting a reduced suite of diagnostic ratios calculated between petroleum biomarkers and polycyclic aromatic hydrocarbons to characterize a set of crude oils. J. Chromatogr. A 2010, 1217, 8279–8289. [Google Scholar] [CrossRef] [PubMed]
  42. Huebschmann, H.; Frank, T. Analysis of Molecular Fossils: Crude Oil Steroid Biomarker Characterization Using Triple Quadrupole GC-MS/MS. Thermo Sci. Appl. Note 2010, 10261. [Google Scholar] [CrossRef]
  43. David, F.; Aronova, S. Analysis of Biomarkers in Crude Oil Using the Agilent 7200 GC/Q-TOF Application Note; Agilent Technologies Inc.: Santa Clara, CA, USA, 2011; Available online: https://www.agilent.com/cs/library/applications/5990-9477EN.pdf (accessed on 15 September 2023).
  44. Escobar, M.; Márquez, G.; Azuaje, V. Use of biomarkers, porphyrins, and trace elements to assess the origin, maturity, biodegradation, and migration of Alturitas oils in Venezuela. Fuel 2012, 97, 186–196. [Google Scholar] [CrossRef]
  45. Kashirtsev, V.A.; Nesterov, I.I.; Melenevskii, V.N.; Fursenko, E.A. ScienceDirect Biomarkers and adamantanes in crude oils from Cenomanian deposits of northern West Siberia. Russ. Geol. Geophys. 2013, 54, 958–965. [Google Scholar] [CrossRef]
  46. Mulabagal, V.; Yin, F.; John, G.F.; Hayworth, J.S.; Clement, T.P. Chemical fingerprinting of petroleum biomarkers in Deepwater Horizon oil spill samples collected from Alabama shoreline. Mar. Pollut. Bull. 2013, 70, 147–154. [Google Scholar] [CrossRef]
  47. Wu, Y.; Xia, Y.; Wang, Y.; Lei, T.; Chang, J.; Wang, Y. Distribution and properties of biomarkers in severely biodegraded crude oil of Gudao reservoir, China. J. Pet. Sci. Eng. 2013, 103, 97–105. [Google Scholar] [CrossRef]
  48. Mathur, N. Tertiary oils from Upper Assam Basin, India: A geochemical study using terrigenous biomarkers. Org. Chem. 2014, 76, 9–25. [Google Scholar] [CrossRef]
  49. Fernández-Varela, R.; Gómez-Carracedo, M.P.; Ballabio, D.; Andrade, J.M. The use of diagnostic ratios, biomarkers and 3-way Kohonen neural networks to monitor the temporal evolution of oil spills. Mar. Pollut. Bull. J. 2015, 96, 313–320. [Google Scholar] [CrossRef]
  50. Jiang, L.; Zhang, M. Geochemical characteristics and signi fi cances of rearranged hopanes in hydrocarbon source rocks, Songliao Basin, China. J. Pet. Sci. Eng. 2015, 131, 138–149. [Google Scholar] [CrossRef]
  51. Wang, Q.; Hao, F.; Xu, C.; Wang, Y.; Zou, H. Geochemical characterization of QHD29 oils on the eastern margin of Shijiutuo uplift, Bohai Sea, China: Insights from biomarker and stable carbon isotope analysis. Mar. Pet. Geol. 2015, 64, 266–275. [Google Scholar] [CrossRef]
  52. Sun, M.; Zhang, P.; Zhou, L.; Liu, H.; Li, G.; Chen, J.; Tan, H.; Fang, X.; Yi, Z.; Wang, G. Biomarker characteristics and oil accumulation period of Well Sutan 1 in in Qaidam Basin, China. J. Nat. Gas Geosci. 2016, 1, 85–91. [Google Scholar] [CrossRef]
  53. El Nady, M.M.; Naglaa, S.; Mohamed, L. Geochemical and biomarker characteristics of crude oils and source rock hydrocarbon extracts: An implication to their correlation, depositional environment and maturation in the Northern Western Desert, Egypt. Egypt. J. Pet. 2015, 25, 263–268. [Google Scholar] [CrossRef]
  54. Zhang, H.; Wang, C.; Zhao, R.; Yin, X.; Zhou, H.; Tan, L.; Wang, J. New diagnostic ratios based on phenanthrenes and anthracenes for effective distinguishing heavy fuel oils from crude oils. MPB 2016, 106, 58–61. [Google Scholar] [CrossRef] [PubMed]
  55. Musbah, A.; Tatjana, S.; Peter, H.; Jovan, B. Organic geochemistry of crude oils from the Intisar oil fi eld (East Sirte Intisar, Libya). J. Pet. Sci. Eng. 2016, 147, 605–616. [Google Scholar] [CrossRef]
  56. Moustafa, N.E.; Fars, K.E.-K. Simple identification approach for trace heteroatom-containing compounds in petroleum fraction by Automated Mass Spectral Deconvolution and Identification System. Chin. J. Chromatogr. 2016, 34, 925–932. [Google Scholar] [CrossRef]
  57. Lobodin, V.V.; Maksimova, E.V.; Rodgers, R.P. Gas Chromatography/Atmospheric Pressure Chemical Ionization Tandem Mass Spectrometry for Fingerprinting the Macondo Oil Spill. Anal. Chem. 2016, 88, 6914–6922. [Google Scholar] [CrossRef] [PubMed]
  58. Yang, C.; Lambert, P.; Zhang, G.; Yang, Z.; Landriault, M.; Hollebone, B.; Brown, C.E. Characterization of chemical fingerprints of unconventional Bakken crude oil. Environ. Pollut. 2017, 230, 609–620. [Google Scholar] [CrossRef]
  59. Pan, Y.; Liao, Y.; Sun, Y. The characteristics of bound biomarkers released from asphaltenes in a sequence of naturally biodegraded oils. Org. Geochem. 2017, 11, 56–66. [Google Scholar] [CrossRef]
  60. Rangel, A.; Osorno, J.F.; Ramirez, J.C.; De Bedout, J.; González, J.L.; Pabón, J.M. Geochemical assessment of the Colombian oils based on bulk petroleum properties and biomarker parameters. Mar. Pet. Geol. 2017, 86, 1291–1309. [Google Scholar] [CrossRef]
  61. Diasty, W.S.; El Beialy, S.Y.; El Anwari, T.A.; Peters, K.E.; Batten, D.J. Organic geochemistry of the Silurian Tanezzuft Formation and crude oils, NC115 Concession, Murzuq Basin, southwest Libya. Mar. Pet. Geol. 2017, 86, 367–385. [Google Scholar] [CrossRef]
  62. Song, D.; Wang, T.; Li, M.; Zhang, J.; Ou, G.; Ni, Z. Geochemistry and charge history of oils from the Yuqi area of Tarim Basin, China. Mar. Pet. Geol. 2017, 79, 81–98. [Google Scholar] [CrossRef]
  63. Kao, N.-H.; Su, M.-C.; Yen, C.-C.; Huang, Y.-J. A characterization of the soils and sediments in contaminated sites and rivers using petroleum biomarker compounds. J. Soils Sediments 2018, 19, 241–254. [Google Scholar] [CrossRef]
  64. Zhan, Z.-W.; Lin, X.-H.; Zou, Y.-R.; Li, Z.; Wang, D.; Liu, C.; Peng, P. Chemometric differentiation of crude oil families in the southern Dongying Depression, Bohai Bay Basin, China. Org. Geochem. 2018, 127, 37–49. [Google Scholar] [CrossRef]
  65. Wang, Z.; Stout, S.A. Oil Spill Environmental Forensics: Fingerprinting and Source Identification; Academic Press: New York, NY, USA, 2007; Volume 2. [Google Scholar]
  66. Zhamanbayeva, A.B.; Kurtova, O.Y.; Alimzhanova, M.B.; Zenkevich, I.G. Determination of C15-C20 isoprenoid alkanes characteristic ratios in the oils from Kazakhstan fields. Anal. Control 2019, 23, 237–246. [Google Scholar] [CrossRef]
  67. Peters, K.E.; Walters, C.C.; Moldowan, J.M. The Biomarker Guide, 2nd ed.; Volume II, Biomarkers and Isotopes in Petroleum Systems and Earth History; Cambridge University Press: Cambridge, UK, 2005; 684p. [Google Scholar]
  68. Moustafa, Y.M.; Morsi, R.E. Biomarkers. Chromatography and Its Applications. 2012. Available online: http://www.intechopen.com/books/chromatography-and-its-applications/biomarkers (accessed on 15 September 2023).
  69. Lijmbach, G. On the Origin of Petroleum: Proceedings of the 9th World Petroleum Congress; Applied Science Publishers: London, UK, 1975; Volume 2, pp. 357–369. [Google Scholar]
  70. Hunt, J.M. Petroleum Geochemistry and Geology, 2nd ed.; W. H. Freeman and Company: New York, NY, USA, 1996. [Google Scholar]
  71. Osuji, L.C.; Antia, B.C. Geochemical Implication of some Chemical Fossils as Indicators of Petroleum Source Rocks. AAPL J. Sci. Environ. Mgt. 2005, 9, 45–49. [Google Scholar]
  72. Didyk, B.M.; Simoneit, B.R.T.; Brassell, S.C.; Eglinton, G. Organic geochemical indicators of paleoenvironmental conditions of sedimentation. Nature 1978, 272, 216–222. [Google Scholar] [CrossRef]
  73. Van Graas, G.W. Biomarker maturity parameters for high maturities: Calibration of the working range up to the oil/condensate threshold. Org. Geochem. 1990, 16, 1025–1032. [Google Scholar] [CrossRef]
  74. Joshi, H.; Pandey, I. Physicochemical and biomarkers study of petroleum oils of KG Basin in India. Int. J. Sci. Res. Eng. Technol. 2014, 2, 595–603. [Google Scholar]
Separations 10 00561 g001
Figure 1. Total peak area of terpanes of the function of injection temperature (A) and oven temperature program (B).
Figure 1. Total peak area of terpanes of the function of injection temperature (A) and oven temperature program (B).
Separations 10 00561 g001
Separations 10 00561 g002
Figure 2. Molecular chemical structures for the biomarkers.
Figure 2. Molecular chemical structures for the biomarkers.
Separations 10 00561 g002
Separations 10 00561 g003
Figure 3. Oxidation and reduction reaction of phytol.
Figure 3. Oxidation and reduction reaction of phytol.
Separations 10 00561 g003
Separations 10 00561 g004
Figure 4. Chromatograms of Nuraly (A) and Kosshagyl (B) crude oils at m/z 57.
Figure 4. Chromatograms of Nuraly (A) and Kosshagyl (B) crude oils at m/z 57.
Separations 10 00561 g004
Separations 10 00561 g005
Figure 5. Plot of Pr/n-C17 vs. Ph/n-C18 showing the sources from the West Kazakhstan crude oils.
Figure 5. Plot of Pr/n-C17 vs. Ph/n-C18 showing the sources from the West Kazakhstan crude oils.
Separations 10 00561 g005
Separations 10 00561 g006
Figure 6. Plot of Pr/n-C17 vs. Ph/n-C18 showing the sources from the South Kazakhstan crude oils.
Figure 6. Plot of Pr/n-C17 vs. Ph/n-C18 showing the sources from the South Kazakhstan crude oils.
Separations 10 00561 g006
Separations 10 00561 g007
Figure 7. C27 and C29 Steranes (m/z 217) distribution of West Kazakhstan crude oils (numbering according to the Table 1).
Figure 7. C27 and C29 Steranes (m/z 217) distribution of West Kazakhstan crude oils (numbering according to the Table 1).
Separations 10 00561 g007
Separations 10 00561 g008
Figure 8. C27 and C29 Steranes (m/z 217) distribution of South Kazakhstan crude oils (numbering according to the Table 1).
Figure 8. C27 and C29 Steranes (m/z 217) distribution of South Kazakhstan crude oils (numbering according to the Table 1).
Separations 10 00561 g008
Separations 10 00561 g009
Figure 9. Distribution of ratio tricyclic/pentacyclic terpanes as maturity indicator for West (A) and South (B) Kazakhstan crude oils (numbering according to the Table 1).
Figure 9. Distribution of ratio tricyclic/pentacyclic terpanes as maturity indicator for West (A) and South (B) Kazakhstan crude oils (numbering according to the Table 1).
Separations 10 00561 g009
Table 1. List of crude oil studies and the deposits’ location.
Table 1. List of crude oil studies and the deposits’ location.
NoCrude Oil FieldYear of DiscoveryLocation
1Akingen1980Atyrau region (West Kazakhstan)
2Akkudyk1981
3Baichunas1931
4Balgimbaev1978
5Kosshagyl1926
6Prorva1964
7Tengiz1979
8Zhanatalap1964
9Dossor1911
10Kashagan2000
11Akshabulak1988Kyzylorda region (South Kazakhstan)
12Aryskum1985
13Aschysai2005
14Konys and Bektas1989 and 1987
15Nuraly1987
16Sarybulak1975
17Kyzylorda1986
18Beineu1966Mangystau region (West Kazakhstan)
19Kalamkas1976
20Karamandybas1988
21Karazhanbas1984
22Zhanaozen1961
23Zhangurshi1981
24Zhetybai1961
25Buzachi1975
26Atasu1939Karagandy region (South Kazakhstan)
27Kumkol1984
28Kyzylkiya1986
Table 2. MS parameters of selected biomarkers.
Table 2. MS parameters of selected biomarkers.
NoBiomarkersMain Ion m/z (Dwell)Additional Ions m/z (Dwell)FormulaCAS
1Pristane5771, 43, 85, 41, 113C19H401921-70-6
2Phytane5771, 43, 85, 41, 55C20H42638-36-8
3n-C17 alkane5743, 71, 85, 41, 55C17H36628-78-7
4n-C18 alkane5743, 71, 41, 85, 29C18H38593-45-3
5Bisnorhopane19195, 81, 69, 163, 55C28H4865636-26-2
6Hopane191109, 192, 123, 135, 137C29H5036728-72-0
7Isobutyl-isocopalane19169, 95, 81, 55C24H44228729-94-0
8Pregnane5541, 81, 67, 67, 217C21H36481-26-5
9Androstane, (5α)-(C19)260245, 95, 203, 81C19H32438-22-2
10Androstane, (5β)-(C19)245260, 41, 95, 55, 81C19H3224887-75-0
11Allopregnane217218, 149, 288, 109, 81C21H36641-85-0
12Homopregnane217302, 55, 95, 81, 67C22H3835575-28-1
13Cholestane217372, 218, 149, 95, 109C27H48481-21-0
14Stigmastane21743, 218, 55, 149, 41C29H52601-58-1
Table 3. Pr/Ph, Pr/n-C17 and Ph/n-C18 ratios for 28 crude oils.
Table 3. Pr/Ph, Pr/n-C17 and Ph/n-C18 ratios for 28 crude oils.
NoLocationCrude Oil FieldPh/n-C18Pr/n-C17Pr/Ph
1Atyrau region (West Kazakhstan)Akingen1.11.41.7
2Akkudyk0.40.61.9
3Baichunas1.23.01.4
4Balgimbaev1.82.91.7
5Kosshagyl2.33.11.7
6Prorva0.30.31.3
7Tengiz0.40.30.9
8Zhanatalap3.52.51.6
9Dossor0.70.61.4
10Kashagan0.80.71.3
11Kyzylorda region (South Kazakhstan)Akshabulak0.20.32.0
12Aryskum0.20.42.0
13Aschysai0.20.41.9
14Konys and Bektas0.50.61.4
15Nuraly0.20.21.9
16Sarybulak0.10.43.3
17Kyzylorda0.10.21.7
18Mangystau region (West Kazakhstan)Beineu0.50.61.2
19Kalamkas0.80.81.1
20Karamandybas1.01.11.2
21Karazhanbas6.34.10.9
22Zhanaozen0.30.31.5
23Zhangurshi0.20.31.8
24Zhetybai0.10.21.9
25Buzachi1.81.71.1
26Karagandy region (South Kazakhstan)Atasu0.40.51.4
27Kumkol0.20.42.0
28Kyzylkiya0.10.32.6
Disclaimer/Publisher’s Note: The statements, opinions and data contained in all publications are solely those of the individual author(s) and contributor(s) and not of MDPI and/or the editor(s). MDPI and/or the editor(s) disclaim responsibility for any injury to people or property resulting from any ideas, methods, instructions or products referred to in the content.

Share and Cite

MDPI and ACS Style

Alimzhanova, M.; Abdykarimov, B. Analysis of Kazakhstan Crude Oil Biomarkers by Gas Chromatography in Combination with Mass Spectrometry. Separations 2023, 10, 561. https://doi.org/10.3390/separations10110561

AMA Style

Alimzhanova M, Abdykarimov B. Analysis of Kazakhstan Crude Oil Biomarkers by Gas Chromatography in Combination with Mass Spectrometry. Separations. 2023; 10(11):561. https://doi.org/10.3390/separations10110561

Chicago/Turabian Style

Alimzhanova, Mereke, and Bauyrzhan Abdykarimov. 2023. "Analysis of Kazakhstan Crude Oil Biomarkers by Gas Chromatography in Combination with Mass Spectrometry" Separations 10, no. 11: 561. https://doi.org/10.3390/separations10110561

APA Style

Alimzhanova, M., & Abdykarimov, B. (2023). Analysis of Kazakhstan Crude Oil Biomarkers by Gas Chromatography in Combination with Mass Spectrometry. Separations, 10(11), 561. https://doi.org/10.3390/separations10110561

Note that from the first issue of 2016, this journal uses article numbers instead of page numbers. See further details here.

Article Metrics

Back to TopTop