Next Article in Journal
Surface and Morphological Features of ZrO2 Sol-Gel Coatings Obtained by Polymer Modified Solution
Previous Article in Journal
Tannin Encapsulation for Personalized Product Applications
 
 
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Abstract

Surface Modification of Implants by Sol-Gel Coating Technology: Advantages and Applications †

by
Flavia Bollino
* and
Elisabetta Tranquillo
*
Department of Engineering, University of Campania “Luigi Vanvitelli”, 81031 Aversa (CE), Italy
*
Authors to whom correspondence should be addressed.
Presented at the 2nd Coatings and Interfaces Web Conference, 15–31 May 2020; Available online: https://ciwc2020.sciforum.net/.
Mater. Proc. 2020, 2(1), 7; https://doi.org/10.3390/CIWC2020-06827
Published: 13 May 2020
(This article belongs to the Proceedings of 2nd Coatings and Interfaces Web Conference (CIWC-2 2020))

Abstract

:
Nowadays, approximately 1.5 million joint replacements are performed annually in Europe, while 7 million are performed in the United States. Despite the advances made in the biomaterials field over the last 50 years, today the average lifetime of an implant is still about 20 years. This entails the need for subsequent prosthetic device replacement, especially in young patients, resulting in an increase in patients’ health risks as well as clinical and economic burdens for the public health service. The failure of the implants can be caused by several reasons, such as adverse immune system reaction, biofilm formation or mechanical, chemical, tribological, surgical, manufacturing and biocompatibility problems. An alternative and useful strategy used to overcome this limitation is the modification of the implants’ surface by sol-gel coating technology. It allows for the production of coatings with a wide range of properties on substrates of different nature and shape, due to the fine control of the coating composition and microstructure. Sol-gel coatings were successfully proposed to inhibit wear, reduce corrosion and ion release, and modify the lubricity, hydrophilicity/hydrophobicity, and functionality of several substrates. Moreover, many works report the application of sol-gel coatings on bio-inert implants to improve their bioactivity and biocompatibility, leading to the enhancement of the integration process. This is ascribable to the presence of residual hydroxyl groups on coating materials’ surface, able to induce easier nucleation of the hydroxyapatite to their mesoporosity and, thus, the large specific surface area. Furthermore, the low processing temperatures allow for easy coating functionalization by embedding suitable molecules such as anti-inflammatory and antibacterial agents leading to coatings preventing biofilm formation and inflammatory pathway activation. Therefore, the application of the sol-gel coatings provides an excellent chemical modification of the materials’ surface, allowing for protective barrier layer production.

References

  • Yang, X.-Y.; Chauhan, N. Photoenergy and Thin Film Materials; Advanced Materials Series. Chapter 8; Wiley-scrivener: Beverly, MA, USA, 2019
Publisher’s Note: MDPI stays neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Share and Cite

MDPI and ACS Style

Bollino, F.; Tranquillo, E. Surface Modification of Implants by Sol-Gel Coating Technology: Advantages and Applications. Mater. Proc. 2020, 2, 7. https://doi.org/10.3390/CIWC2020-06827

AMA Style

Bollino F, Tranquillo E. Surface Modification of Implants by Sol-Gel Coating Technology: Advantages and Applications. Materials Proceedings. 2020; 2(1):7. https://doi.org/10.3390/CIWC2020-06827

Chicago/Turabian Style

Bollino, Flavia, and Elisabetta Tranquillo. 2020. "Surface Modification of Implants by Sol-Gel Coating Technology: Advantages and Applications" Materials Proceedings 2, no. 1: 7. https://doi.org/10.3390/CIWC2020-06827

Article Metrics

Back to TopTop