1. Introduction
The yet undetermined topology of space, how it may have affected the early evolution of the Universe in the quantum gravity regime and the large-scale structure formation at later stages are all vibrant topics of research both in theoretical physics and cosmology. The theory of General Relativity admits any type of spatial topology, so it is quite possible that the Universe is not simply connected, but instead, multiply connected and in the latter case, may have a finite volume with negative or zero curvature [
1]. Common examples of multiply connected spaces include spaces with the slab
, chimney
and the three torus
topologies, which belong to the class of toroidal topologies in one, two and three dimensions, respectively.
Given the absence of answers on theoretical grounds, there is extensive ongoing research on finding, if any, observational indications of the shape of space [
2,
3,
4,
5,
6], especially in the Cosmic Microwave Background (CMB) data. Certain compelling studies have pointed out that CMB anomalies in large angular scale observations, namely, the suppression of the quadrupole moment and the quadrupole and octopole alignment, may in fact be consequences of the spatial topology [
7,
8]. In this connection, we study the chimney topology with a single infinite axis which may be referred to as the preferred axis of the quadrupole and octopole alignment and the so-called “axis of evil” [
9] (see [
10] for other potential observable imprints of a preferred axis). From Planck 2013 data [
1], the radius of the largest sphere that may be inscribed in the topological domain is bounded from below by
for a flat Universe with
(equal-sided chimney) topology, where
(
) represents the distance to the recombination surface. There are also former bounds imposed on the size of the Universe by the 7 and 9-year WMAP temperature map data available in [
9,
11] for the topologies with toroidal dimensions.
In the present work, we consider the space with chimney topology
and study its impacts on the shape of the gravitational potential. In the cosmological context, the potential is sourced by matter density fluctuations [
12] and in the Newtonian limit, it is determined in the conventional way by the Poisson equation. Regarding toroidal topologies, the shape of the gravitational potential was previously investigated in [
13] and it was shown that a physically meaningful nontrivial solution to the Poisson equation for the
type does not exist. Nevertheless, with the aim to include the relativistic effects in the scheme, one may instead resort to the perturbed Einstein equations, which subsequently yield a Helmholtz-type equation for the gravitational potential [
14,
15,
16]. Very conveniently, and as we herein demonstrate for the chimney topology, this equation can be solved exactly to give nontrivial and physically meaningful expressions without assuming any particular spatial distribution for the gravitating bodies. Within this latter approach, we elaborate on two alternative solutions for the gravitational potential and demonstrate explicitly that the one in the form of summed Yukawa potentials is the more convenient expression for numerical computation purposes.
2. Methods
Starting with the perturbed Einstein equations to introduce the general relativistic effects into the scheme, one finds that for the concordance ΛCDM cosmological model, the gravitational potential
satisfies [
14,
15,
16]
where
(
is the Newtonian gravitational constant and
is the speed of light),
denotes the scale factor and
is the Laplace operator in comoving coordinates. The comoving mass density and its averaged value are represented by
and
, respectively. Delta-shaped gravitating bodies with masses
constitute the pressureless matter component of the Universe and imitate, for instance, the galaxies and groups of galaxies. The
subscript in Equation (1) indicates that peculiar motion has been omitted in the current setting (see also [
17]).
The shifted gravitational potential
is then straightforwardly determined by
which may be solved using the superposition principle.
In the space with chimney topology
, we first assign periods
and
to the tori
and
along the
- and
-axes, respectively. In such configuration, there exist infinitely many images for each gravitating source, located at points shifted from its actual position by multiples of
and
along the corresponding axes. Then, for a particle
placed at the center of Cartesian coordinates, the delta functions
and
read
and intrinsically contain the information of the periodic images of the source as well. Given the full form of these functions, the solution to Equation (2) follows as
Now, since Equation (2) is of Helmholtz-type, its solution may also be alternatively obtained by considering the series of Yukawa potentials, each of which corresponds to the individual contribution of the periodic image:
As we have indicated earlier, Equations (1) and, therefore, (2) do not incorporate the effects of peculiar motion. In [
18], however, it has been shown that the role of such contribution is essential in the cosmological setting and that peculiar velocities may be effectively reintroduced by using the effective cosmological screening length
(see Formula (41) of [
18]) in replacement of the screening length
in Equations (1) and (2). At this point, this amounts to substituting
with
in the right-hand side of (4) and (5), which yields
and
where we have also employed the rescaled quantities
and for simpler representation, set
The labels cos and exp have been introduced in the above set to distinguish between two forms of the solution. Since peculiar velocities are effectively restored, the
subscripts have been eliminated.
Both Formulas (6) and (7) specify the gravitational potential attributed to a point-like body with mass , located at the point in Cartesian coordinates, together with its images at points for … Evidently, since these rescaled potentials consist of infinite series, it is necessary to know the minimum number of terms required to calculate them numerically for any order of accuracy. As to the accuracy adopted in our work, we demand that this number is determined in such a way to keep the absolute value of the ratio (exact -approximate )/(exact ) less than 0.001. It may, of course, differ for the alternative formulas, so we label these numbers as and , correspondingly. The formula which admits the smaller serves as a better tool for numerical analysis.
In the following section, we present our results regarding the comparison of the Formulas (6) and (7) based on the above mentioned criterion. Since these expressions contain double series, we use Mathematica [
19] for generating the sequence of pairs
in the increasing order of
. Then,
is ascribed the number of combinations providing the desired precision.
3. Results
For demonstration purposes, we have chosen eight points on the rescaled coordinates and used Mathematica [
19] to calculate the exact value of the gravitational potential at these points by the Formula (7) for
. The results are shown in
Table 1 for two cases
= 0.01 and
= 0.1. Provided that
, the approximate value of
(from (7)) agrees with the exact one up to one tenth of a percent. The minimum numbers of terms needed in the alternative Formula (6) to obtain these potential values, again, up to one tenth of a percent, correspond to the
columns.
The data in
Table 1 clearly illustrate that the Formula (7) is a better option than its alternative for reducing the computational cost in numerical analysis as
. It is worth noting that the selected values of
serve well in depicting the observable Universe as they both satisfy
: for the chimney topology studied here, the lower bound on physical periods
of the tori is of the order of 20 Gpc [
1]. Additionally, according to [
18], the current value of the effective screening length is approximately 2.6 Gpc, so the ratio
, in terms of these values, limits the physically interesting range for
today.
Finally, we present
Figure 1 to help visualize the shape of the rescaled gravitational potential
for two different values of
considered in
Table 1. To plot these figures, we have used Mathematica [
19] and employed the Formula (7) for
.
4. Conclusions
In the present work, we have elaborated on two alternative methods to reveal the form of the gravitational potential for the chimney topology of the Universe. One of the solutions (see Equation (6)) has been obtained by Fourier expanding the delta functions using periodicity along two toroidal dimensions in the model. The other one (see Equation (7)) has been presented as the plain summation of the solutions to the Helmholtz equation, for the source particle and its images, all of which admit Yukawa-type potential expressions. Meanwhile, we have emphasized the essential role of the effective screening length , which specifies the cutoff distance of the gravitational interaction in the cosmological setting, manifested explicitly in this latter expression.
Having obtained two alternative formulas for the gravitational potential, we then demonstrated that the solution containing the series sum of Yukawa potentials is a better choice for use in numerical calculations, in the sense that the desired accuracy is attained by keeping fewer terms in the series in the physically significant cases when .