30 April 2020
[Micromachines, IF 2.426] New Section “Engineering and Technology”
You are accessing a machine-readable page. In order to be human-readable, please install an RSS reader.
All articles published by MDPI are made immediately available worldwide under an open access license. No special permission is required to reuse all or part of the article published by MDPI, including figures and tables. For articles published under an open access Creative Common CC BY license, any part of the article may be reused without permission provided that the original article is clearly cited. For more information, please refer to https://www.mdpi.com/openaccess.
Feature papers represent the most advanced research with significant potential for high impact in the field. A Feature Paper should be a substantial original Article that involves several techniques or approaches, provides an outlook for future research directions and describes possible research applications.
Feature papers are submitted upon individual invitation or recommendation by the scientific editors and must receive positive feedback from the reviewers.
Editor’s Choice articles are based on recommendations by the scientific editors of MDPI journals from around the world. Editors select a small number of articles recently published in the journal that they believe will be particularly interesting to readers, or important in the respective research area. The aim is to provide a snapshot of some of the most exciting work published in the various research areas of the journal.
Original Submission Date Received: .
Micromachines (ISSN 2072-666X, impact factor 2.426) is launching a new Section “Engineering and Technology” which will cover the following topics:
-Micro/nanofabrication and manufacturing: deposition, lithography, patterning, etching, surface micromachining, bulk micromachining, laser fabrication, biofabrication, 3D printing, self-assembly, etc.;
-Design and optimization principles of micro- and nanosystems;
-Micro/nanosystems and advanced technologies for engineering applications: resources engineering, civil engineering, advanced manufacturing engineering, environmental engineering, bioengineering, electronic systems (including electrical circuits and devices, transistors, capacitors, inductors, resistors, diodes, insulators, and conductors), engineering, etc.
The following Special Issues of this section are currently open for submissions:
Micromachines is a peer-reviewed open access journal on the science and technology of small structures, devices, and systems, published monthly online by MDPI.
Benefits of publishing in Micromachines:
-Impact Factor 2.426 (2018 Journal Citation Reports@)
-Rapid Publication: Manuscripts are peer-reviewed, and a first decision provided to authors approximately 13.5 days after submission; acceptance to publication is undertaken in 1.9 days (median values for papers published in this journal in the second half of 2019)
-Coverage by Leading Indexing Services: SCIE—Science Citation Index Expanded (Clarivate Analytics), Compendex (EI), PubMed (NLM), Scopus (Elsevier)
-Open Access: Unlimited and free access for readers
-No Copyright Constraints: Retain copyright of your work and free use of your article
-No Space Constraints, No Extra Space or Color Charges: No restriction on the length of the papers, number of figures, or use of color
-Discounts for Exceptional and Professional Service: The article processing charge (APC) for each accepted paper is 1600 CHF. You may be entitled to a discount if you have previously received a discount code.
If you are interested in publishing a paper, please feel free to contact us ([email protected]) or you may submit your paper directly here. Please do not hesitate to contact us with any questions.
We look forward to collaborating with you.