1. “Multifunctional Polymer Composites Produced by Melt-Blown Technique to Use in Filtering Respiratory Protective Devices”
Agnieszka Brochocka et al.
Materials 2020, 13(3), 712; 10.3390/ma13030712
Available online: https://www.mdpi.com/1996-1944/13/3/712
2. “Brief History of Early Lithium-Battery Development”
Mogalahalli V. Reddy et al.
Materials 2020, 13(8), 1884; 10.3390/ma13081884
Available online: https://www.mdpi.com/1996-1944/13/8/1884
3. “Progress and Status of Hydrometallurgical and Direct Recycling of Li-Ion Batteries and Beyond”
François Larouche et al.
Materials 2020, 13(3), 801; 10.3390/ma13030801
Available online: https://www.mdpi.com/1996-1944/13/3/801
4. “Face Masks and Respirators in the Fight Against the COVID-19 Pandemic: A Review of Current Materials, Advances and Future Perspectives”
Kris O’Dowd et al.
Materials 2020, 13(15), 3363; 10.3390/ma13153363
Available online: https://www.mdpi.com/1996-1944/13/15/3363
5. “Using Deep Learning to Detect Defects in Manufacturing: A Comprehensive Survey and Current Challenges”
Jing Yang et al.
Materials 2020, 13(24), 5755; 10.3390/ma13245755
Available online: https://www.mdpi.com/1996-1944/13/24/5755
6. “Review of Application and Innovation of Geotextiles in Geotechnical Engineering”
Hao Wu et al.
Materials 2020, 13(7), 1774; 10.3390/ma13071774
Available online: https://www.mdpi.com/1996-1944/13/7/1774
7. “Effect of Fibre Material and Fibre Roughness on the Pullout Behaviour of Metallic Micro Fibres Embedded in UHPC”
Niels Wiemer et al.
Materials 2020, 13(14), 3128; 10.3390/ma13143128
Available online: https://www.mdpi.com/1996-1944/13/14/3128
8. “Melt-Spun Fibers for Textile Applications”
Rudolf Hufenus et al.
Materials 2020, 13(19), 4298; 10.3390/ma13194298
Available online: https://www.mdpi.com/1996-1944/13/19/4298
9. “Devulcanization Technologies for Recycling of Tire-Derived Rubber: A Review”
Erich Markl and Maximilian Lackner
Materials 2020, 13(5), 1246; 10.3390/ma13051246
Available online: https://www.mdpi.com/1996-1944/13/5/1246
10. “The Critical Raw Materials in Cutting Tools for Machining Applications: A Review”
Antonella Rizzo et al.
Materials 2020, 13(6), 1377; 10.3390/ma13061377
Available online: https://www.mdpi.com/1996-1944/13/6/1377
