We are pleased to invite you to read the selected papers in Polymers (ISSN: 2073-4360) in the Section “Polymer Analysis and Characterization”. The paper list is as follows:

1. “Copper Ions Absorbed on Acrylic-Acid-Grafted Polystyrene Enable Direct Bonding with Tunable Bonding Strength and Debonding on Demand”
by Roman Günther, Walter Caseri and Christof Brändli
Polymers 2022, 14(23), 5142; https://doi.org/10.3390/polym14235142
Available online: https://www.mdpi.com/2073-4360/14/23/5142

2. “Self-Healing and Reprocessable Oleic Acid-Based Elastomer with Dynamic S-S Bonds as Solvent-Free Reusable Adhesive on Copper Surface”
by Luca Pettazzoni, Francesca Leonelli, Andrea Giacomo Marrani, Luisa Maria Migneco, Fabrizio Vetica, Lorenzo Celio, Valerio Napoleone, Sara Alfano, Andrea Colecchia, Francesco Amato et al.
Polymers 2022, 14(22), 4919; https://doi.org/10.3390/polym14224919
Available online: https://www.mdpi.com/2073-4360/14/22/4919

3. “Effect of Epoxy Structure on Properties of Waterborne Coatings and Electrical Steel Laminates”
by Cornelia Marchfelder, Robert Pugstaller, Gernot M. Wallner, Oliver Brüggemann and Maëlenn Aufray
Polymers 2022, 14(8), 1556; https://doi.org/10.3390/polym14081556
Available online: https://www.mdpi.com/2073-4360/14/8/1556

4. “Influence of Acrylonitrile Content on the Adhesive Properties of Water-Based Acrylic Pressure-Sensitive Adhesives”
by Irene Márquez, Núria Paredes, Felipe Alarcia and José Ignacio Velasco
Polymers 2022, 14(5), 909; https://doi.org/10.3390/polym14050909
Available online: https://www.mdpi.com/2073-4360/14/5/909

5. “An Essential Role of Polymeric Adhesives in the Reinforcement of Acidified Paper Relics”
by Jiaojiao Liu, Huiping Xing, Yajun Zhou, Xiaolian Chao, Yuhu Li and Daodao Hu
Polymers 2022, 14(1), 207; https://doi.org/10.3390/polym14010207
Available online: https://www.mdpi.com/2073-4360/14/1/207

6. “Comparative Mechanical Study of Pressure Sensitive Adhesives over Aluminium Substrates for Industrial Applications”
by Marta Ortega-Iguña Mariane Chludzinski and José María Sánchez-Amaya
Polymers 2022, 14(21), 4783; https://doi.org/10.3390/polym14214783
Available online: https://www.mdpi.com/2073-4360/14/21/4783

7. “Experimental Research on Polymer-Based Coaxial Sealing Systems of Hydraulic Cylinders for Small Displacement Velocities”
by Tudor Deaconescu and Andrea Deaconescu
Polymers 2022, 14(2), 290; https://doi.org/10.3390/polym14020290
Available online: https://www.mdpi.com/2073-4360/14/2/290

8. “Role of Macrodiols in the Synthesis and Thermo-Mechanical Behavior of Anti-Tack Water Borne Polyurethane Dispersions”
by Nadia Akram, Muhammad Saeed and Muhammad Usman
Polymers 2022, 14(3), 572; https://doi.org/10.3390/polym14030572
Available online: https://www.mdpi.com/2073-4360/14/3/572

9. “Impact of Non-Accelerated Aging on the Properties of Parylene C”
by Franz Selbmann, Christina Scherf, Jörn Langenickel, Frank Roscher, Maik Wiemer, Harald Kuhn and Yvonne Joseph
Polymers 2022, 14(23), 5246; https://doi.org/10.3390/polym14235246
Available online: https://www.mdpi.com/2073-4360/14/23/5246

You can check all publications in Section “Polymer Analysis and Characterization” at the following link: https://www.mdpi.com/search?journal=polymers&section=802.