Search Results (236)

Nitrophenol (NP) and methylene blue (MB) are considered among the most hazardous organic contaminants frequently released from pharmaceutical, textile, and paper industries, posing significant risks to both human health and the environment. The conventional treatment involves adsorption, oxidation, biological, filtration, and other photochemical degradation methods, which often suffer from low efficiency, limited reusability, and the production of secondary toxic by-products. In this context, the nanomaterials (NMs) mediated catalytic reduction of MB into leucomethylene blue and p-NP into p-aminophenol (p-AP) has emerged as a promising approach, due to its high efficiency and effectiveness. This review emphasizes the green synthesis of NMs for catalytic applications, which align with the principles of the circular economy and the Sustainable Development Goals (SDGs). This thorough review systematically examines the mechanistic understanding of the reduction of both p-NP and MB via different green synthesized NMs and evaluating their catalytic efficiencies. Furthermore, a detailed discussion of the reduction of pollutants (p-NP and MB) is provided, along with their mechanistic insights. In addition, this paper also provides a comparative table highlighting the effects of using different precursors, experimental conditions on the conversion catalytic efficiency and reusability potency. Thus, this work provides the insights into recent research on the catalytic reduction of p-NP and MB into valuable products, highlighting the significance of green synthesized nanocatalysts for effective wastewater treatment. Full article

This study investigates the synthesis, dual functional applications, and electrochemical performance of the amine-functionalized metal-organic framework (MOF), namely UiO-66-NH₂. The material was synthesized via the solvothermal method and characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), and scanning and transmission electron microscopy (SEM/TEM). UiO-66-NH₂ was assessed as a catalyst for the reduction of nitroarenes, specifically 2-nitrophenol (2-NP) and 4-nitrophenol (4-NP), under both dark and photo-assisted (i.e., photocatalysis) conditions. Complete photoreduction of nitroarenes was achieved under photocatalysis, highlighting its photo-assisted catalytic efficacy. UiO-66-NH₂ before and after nitroarenes adsorption capacities were investigated, and subsequent electrochemical assessments confirmed its suitability as a supercapacitor electrode. Cyclic voltammetry (CV) and galvanostatic charge–discharge (GCD) analyses demonstrated that nitroarene adsorption and light irradiation markedly improved specific capacitance. 2-NP@UiO-66-NH₂ showed specific capacitance of 221 F/g at 1 A/g under UV radiation. UiO-66-NH₂ demonstrated remarkable cycling stability (100%) across 7000 cycles. Structural and property modifications of UiO-66-NH₂, adsorption of redox-active species, and photo-assisted mechanisms can significantly enhance the energy storage efficacy. The results illustrate the dual role of UiO-66-NH₂ as an effective photo-assisted catalyst and electroactive supercapacitor material, facilitating integrated environmental remediation and energy storage applications. Full article

Celtis africana, a rare plant native to southwestern Saudi Arabia, was explored for the first time as a source for the green synthesis of silver nanoparticles (AgNPs). Catechol-bearing phenolic amides in the aqueous leaf extract acted as both reducing and capping agents, enabling eco-friendly AgNP fabrication. The synthesized AgNPs were characterized using SEM, TEM, XRD, UV-Vis, and FTIR, revealing predominantly spherical nanoparticles with an average size of 9.28 ± 0.11 nm, a face-centered cubic crystalline structure, and a pronounced surface plasmon resonance at 424 nm. HPLC analysis confirmed the presence of caffeoyltryamine in the extract, while UV-Vis and FTIR indicated its attachment to the AgNP surface. The AgNPs exhibited broad-spectrum antimicrobial activity against Gram-positive bacteria (S. aureus, MRSA and E. faecalis) and Gram-negative bacteria (E. coli, K. pneumoniae, S. typhimurium, and P. aeruginosa), as well as pathogenic fungi such as C. albicans, C. glabrata, C. parapsilosis, and C. krusei with performance comparable to or exceeding that of AgNPs from Artemisia vulgaris, Moringa oleifera, and Nigella sativa. The MIC and MBC values for S. aureus, MRSA, E. coli, and S. typhimurium were consistently 6.25 µg/mL and 25 µg/mL, respectively, reflecting strong inhibitory and bactericidal effects at low concentrations. MTT assays demonstrated selective cytotoxicity, showing higher viability in normal human skin fibroblasts (HSF) than in MCF-7 breast cancer cells. The AgNPs also displayed strong antioxidant activity (IC₅₀ = 5.41 µg/mL, DPPH assay) and efficient catalytic reduction of 4-nitrophenol (4-NP) and methylene blue (MB), with rate constants of 0.0165 s⁻¹ and 0.0047 s⁻¹, respectively, exceeding most reported values. These findings identify Celtis africana as a promising source for eco-friendly AgNPs with strong antimicrobial, antioxidant, and catalytic properties for broad biological and environmental applications. Full article

Environmental pollution and sustainability issues require environmentally friendly solutions. In this study, we synthesized copper oxide nanoparticles (CuO NPs) using a sol––gel method with Croton macrostachyus bark extract for application in environmental remediation and as an antimicrobial agent. The uncalcined CuO NPs (200 mg/mL) demonstrated strong antimicrobial activity, with inhibition zones of 22 ± 1.3 mm against Staphylococcus aureus and 11 ± 0.7 mm against Escherichia coli. Moreover, the nanoparticles efficiently catalyzed the reduction of 4-nitrophenol, achieving 98.79% degradation within 8 min (K_app = 0.507 min⁻¹). These findings show that CuO NPs synthesized from the extract of Croton macrostachyus provide a sustainable and efficient approach for addressing both environmental pollution and antibacterial resistance. Full article

In this work, a novel approach for the catalytic reduction of 4-nitrophenol to 4-aminophenol using sodium borohydride is proposed. It was shown that a continuous-flow microreactor system is an optimal tool for PdNP synthesis with dimensions of 3.0 ± 0.5 nm, as well as the performance of catalytic tests with high process efficiency, while keeping a high level of safety. The results obtained from the microreactor system allowed for 100% conversion to 4-aminophenol and were compared to processes carried out in a batch reactor, as well as to a hybrid system which was a combination of a microreactor (synthesis of PdNPs) and batch reactor (catalytic test). These investigations were enhanced by kinetic studies, for which a stopped-flow spectrophotometer was applied due to the extremely high rate of the reaction, i.e., formation of PdNPs (2.1 s), as well as to measure in situ the rate of the heterogeneous catalytic process. To visualize the progress of the heterogeneous reaction more precisely, color coding based on transmittance measurements was employed. Furthermore, to deepen the understanding of the process, a detailed mechanism supported by DFT calculations for the conversion of 4-nitrophenol to 4-aminophenol in the presence of PdNPs was proposed. Full article

The design of sustainable nanomaterials for catalysis is a key challenge in green chemistry. Herein, we report the synthesis of halloysite nanotube (Hal)-based nanomaterials selectively functionalized with a bio-inspired polydopamine (PDA) coating, which enables the controlled anchoring of palladium and copper nanoparticles (PdNPs and CuNPs). This mild and ecofriendly strategy yields highly dispersed and ultrasmall (<5 nm) metal nanoparticles without the need for surfactants or harsh reagents. The resulting materials, Hal@PDA/PdNPs and Hal@PDA/CuNPs, were evaluated in two well-established model reactions commonly employed to probe catalytic performance: cinnamaldehyde hydrogenation and 4-nitrophenol reduction. Hal@PDA/PdNPs displayed complete conversion and >90% selectivity toward hydrocinnamaldehyde at low Pd loading (0.8 wt%) and maintained its efficiency over six catalytic cycles (TOF up to 0.1 s⁻¹), while Hal@PDA/CuNPs retained high activity through eight consecutive runs in the reduction of 4-nitrophenol. Hal@PDA/CuNPs proved to be an excellent recyclable catalyst for the reduction of 4-nitrophenol, retaining high activity through eight consecutive runs. Overall, this study introduces a robust and modular approach to fabricating halloysite-based nanocatalysts, demonstrating their potential as green platforms for metal nanoparticle-mediated transformation. Full article

This study explores the green synthesis of silver-doped lanthanum oxide (La/Ag), silver-doped yttrium oxide (Y/Ag), and silver-doped lanthanum–yttrium oxide (La/Y/Ag) nanocomposites using Catharanthus roseus extract as a natural reducing and stabilizing agent. The nanocomposites were characterized using various spectroscopic techniques to confirm their morphology, composition, crystallinity, and functional groups. La/Ag, Y/Ag, and La/Y/Ag exhibited significant catalytic activity in the reduction and degradation of methylene blue (MB), methyl orange (MO), acridine orange (AO), and 4-nitrophenol (4-NP). Optimization studies showed that La/Ag achieved complete MB reduction within 3 min, while La/Y/Ag reduced MO in 90 s. Both catalysts maintained high activity over multiple cycles, with only slight efficiency loss. In real water media, La/Ag and La/Y/Ag achieved reduction efficiencies of 98% and 97%, respectively. La/Ag also demonstrated excellent photocatalytic degradation of AO under UV light, achieving complete degradation in 80 min, and 98% degradation in tap and seawater samples. Additionally, the nanocomposites demonstrated broad-spectrum antimicrobial activity against bacterial and fungal pathogens, with varying inhibition levels across species. Full article

Addressing the urgent need for robust and sustainable catalysts to detoxify nitroaromatic pollutants, this study introduces a novel approach for synthesizing cobalt oxide nanocomposites via pyrolysis of cobalt benzene-1,3,5-tricarboxylate. By integrating porous carbon (PC) and nano silica (NS) supports with Co₃O₄ to form (Co₃O₄/PC) and (Co₃O₄/NS), we achieved precise morphological control, as evidenced by SEM and TEM analysis. SEM revealed 80–500 nm Co₃O₄ microspheres, 300 nm Co₃O₄/PC microfibers, and 2–5 µm Co₃O₄/NS spheres composed of 100 nm nanospheres. TEM further confirmed the presence of ~15 nm nanoparticles. Additionally, FTIR spectra exhibited characteristic Co–O bands at 550 and 650 cm⁻¹, while UV–Vis absorption bands appeared in the range of 450–550 nm, confirming the formation of cobalt oxide structures. Catalytic assays toward p-nitrophenol reduction revealed exceptional kinetics (k = 0.459, 0.405, and 0.384 min⁻¹) and high turnover numbers (TON = 5.1, 6.7, and 6.3 mg 4-NP reduced per mg of catalyst), outperforming most of the recently reported systems. Notably, both supported catalysts retained over 95% activity after two regeneration cycles. These findings not only fill a gap in the development of efficient, regenerable cobalt-based catalysts, but also pave the way for practical applications in environmental remediation. Full article

The rising demand for platinum-group metals, driven by their essential applications in catalysis, energy storage, and chemical conversion, underscores the need to identify new sources for their recovery. Waste solutions originating from industrial processes offer a promising alternative source of noble metals. However, due to their typically low concentrations, effective recovery requires a highly targeted approach. In this study, we present a synthetic waste solution containing trace amount of Rh(III) ions as both a medium for metal ion recovery and a direct precursor for catalyst synthesis. Using a bimodal water–ethanol solvent system, ultra-small rhodium nanoparticles were synthesized and subsequently immobilized onto activated carbon fibers (ACFs) within a microreactor system. The resulting Rh@ACF catalyst demonstrated high efficiency in the reduction of 4-nitrophenol (4-NP) to 4-aminophenol (4-AP), serving as a model catalytic reaction. The Rh@ACF catalyst, containing 4.24 µg Rh per milligram of sample, exhibited notable catalytic activity, achieving 75% conversion of 4-NP to 4-AP within 1 h. Full conversion to 4-AP was also reached within 5 min, but requires extra NaBH₄ addition to the catalytic mixture. Full article

To mitigate the consumption of active sites on co-catalysts by H₂O₂ and to enhance the efficiency and stability of co-catalytic Fenton reactions, an external circulation two-stage packed-bed reactor (ECTPBR) was developed using DPW (diatomite plate@polydopamine@WC) as a co-catalyst to degrade 4-nitrophenol (4-NP). Under suitable conditions, the ECTPBR could achieve over 91.97% 4-NP degradation, with low iron sludge production (11.97 mg/L) and minimal tungsten leaching (3.6363 mg/L). The two-stage strategy enabled spatial separation of Fe³⁺ reduction and Fenton reactions, minimizing the loss of active sites on DPW, ensuring long-term system stability, and reducing the toxicity of 4-NPdegradation products. In addition, external circulation enhanced mass transfer and improved resistance to shock loads. These advantages suggest that the ECTPBR may serve as an effective strategy for applying co-catalytic Fenton reactions in the treatment of toxic and refractory organic wastewater. Full article

An anion exchange-assisted technique was used for the synthesis of platinum-decorated SnO₂ supports, providing nanocatalysts with enhanced activity for the reduction of 4-nitrophenol (4-NP) to 4-aminophenol (4-AP). In this study, a series of SnO₂ supports, namely SnA (synthesized almost at room temperature), SnB (hydrothermally treated at 180 °C), and SnC (annealed at 600 °C), are systematically investigated, all loaded with 1 mol% Pt from H₂PtCl₆ under identical mild conditions. The chloride ions from the SnCl₄ precursors were efficiently removed via a strong-base anion exchange reaction, resulting in highly dispersed, crystalline ~5 nm cassiterite SnO₂ particles. All Pt/SnO₂ composites displayed mesoporous structures with type IVa isotherms and H₂-type hysteresis, with SP1a (Pt on SnA) exhibiting the largest surface area (122.6 m²/g) and the smallest pores (~3.5 nm). STEM-HAADF imaging revealed well-dispersed PtOx domains (~0.85 nm), while XPS confirmed the dominant Pt⁴⁺ and Pt²⁺ species, with ~25% Pt⁰ likely resulting from photoreduction and/or interactions with Sn–OH surface groups. Raman spectroscopy revealed three new bands (260–360 cm⁻¹) that were clearly visible in the sample with 10 mol% Pt and were due to the vibrational modes of the PtOx species and Pt-Cl bonds introduced due the addition and hydrolysis of H₂PtCl₆ precursor. TGA/DSC analysis revealed the highest mass loss for SP1a (~7.3%), confirming the strong hydration of the PtOx domains. Despite the predominance of oxidized PtOx species, SP1a exhibited the highest catalytic activity (k_app = 1.27 × 10⁻² s⁻¹) and retained 84.5% activity for the reduction of 4-NP to 4-AP after 10 cycles. This chloride-free low-temperature synthesis route offers a promising and generalizable strategy for the preparation of noble metal-based nanocatalysts on oxide supports with high catalytic activity and reusability. Full article

The green-chemical preparation of silver nanoparticles (AgNPs) offers a sustainable and environmentally friendly alternative to conventional synthesis methods, thereby representing a paradigm shift in the field of nanotechnology. The biological synthesis process, which involves the synthesis, characterization, and management of materials, as well as their further development at the nanoscale, is the most economical, environmentally friendly, and rapid synthesis process compared to physical and chemical processes. Ligustrum ovalifolium flower extract was used for the preparation of AgNPs. The synthesized AgNPs were examined by using UV–visible spectroscopy, XRD, SEM, and TEM analysis. It indicates that AgNPs were formed in good size. AgNPs were applied as a catalyst for the degradation of pollutants, such as methyl orange, Congo red, and methylene blue, which were degraded within 8–16 min. Additionally, the reduction of para-nitrophenol (PNP) to para-aminophenol (PAP) was achieved within 2 min. This work demonstrates a practical, reproducible, and efficient method for synthesizing cost-effective and stable AgNPs, which serve as active catalysts for the rapid degradation of hazardous organic dyes in an aqueous environment. Full article

To successfully prepare cellulose hydrogels through a dissolution–regeneration process, 60 wt% LiBr aqueous solution was used as a green solvent. Carboxyl groups were precisely introduced onto the surface of the cellulose hydrogels through a TEMPO-mediated oxidation reaction, while the three-dimensional network structure and open pore morphology were completely retained. This modification strategy significantly enhanced the loading capacity of the hydrogels with copper nanoparticles (Cu NPs). The experimental results show that the LiBr aqueous solution can efficiently dissolve cellulose, and the TEMPO oxidation introduces carboxyl groups without destroying the stability of the hydrogels. Cu NPs are uniformly dispersed and highly loaded on the surface of the hydrogel because of the anchoring effect of the carboxyl groups. Cu NP-loaded hydrogels exhibit excellent catalytic activity in the NaBH₄ reduction of 4-nitrophenol (4-NP). Cu NP-loaded hydrogels maintain their complete structure and good catalytic performance after five consecutive cycles. Moreover, Cu NP-loaded hydrogels demonstrate high efficiency in degrading organic dyes such as methyl orange and Congo red. This study successfully developed efficient, low-cost, and environmentally friendly Cu NP-loaded hydrogel catalysts through the synergistic effect of LiBr green solvent and TEMPO oxidation modification, providing a feasible alternative to noble metal catalysts. Full article

The use of fibers or fabrics as frameworks for loading photocatalysts is beneficial in solving the problems of photocatalytic nanomaterials, which tend to agglomerate and are difficult to recycle. In this study, Bi₂WO₆/CFb and Bi₂WO₆/Bi₂S₃/CFb photocatalytic fibers rich in oxygen vacancies were prepared using carbon fibers as the framework by the crystal seed attachment method and in situ growth method by using the self-polymerization and strong adhesion properties of dopamine. The results of SEM, TEM and XRD tests showed that Bi₂WO₆ and Bi₂WO₆/Bi₂S₃ nanosheets were uniformly and completely encapsulated on the surface of the carbon fibers. The results of XPS and EPR tests showed that Bi₂WO₆ nanosheets were rich in oxygen vacancies. The PL, transient photocurrent responses and EIS results showed that the introduction of Bi₂S₃ significantly improved the migration efficiency of the photogenerated carriers of Bi₂WO₆/Bi₂S₃/CFb, which effectively hindered the recombination of photogenerated electron–hole pairs. By conducting degradation experiments on p-nitrophenol and analyzing the bandgap structure, it was postulated that the heterojunction structure of Bi₂WO₆/Bi₂S₃/CFb in the Bi₂WO₆/Bi₂S₃ material was not Type-II but Z-scheme. As analyzed by the active species assay, the active species that played a major role in the degradation process were O₂⁻ and h⁺. The incorporation of a small amount of Bi₂S₃ resulted in enhanced photocatalytic degradation activity of Bi₂WO₆/Bi₂S₃/CFb toward tetracycline hydrochloride compared to Bi₂WO₆/CFb. The excellent photocatalytic performance of Bi₂WO₆/Bi₂S₃/CFb photocatalytic fibers can be attributed to the rapid transmission and separation performance and the high oxidation and reduction capacities of photogenerated electron–hole pairs formed by direct Z-scheme heterojunctions. Full article

In this study, a novel, highly efficient, environment friendly, and low-cost nanocatalyst, denoted as Ni(x)@Co−N−C, was successfully developed by encapsulating Ni nanoparticles into N-doped porous carbon derived from ZIF-67. A variety of techniques including powder X-ray diffraction (XRD), nitrogen adsorption/desorption, scanning electron microscopy (SEM), transmission electron microscopy (TEM), and X-ray photoelectron spectrometer (XPS) were used to characterize the prepared materials. The TEM images reveal that the nanoparticles were distributed homogeneously in the carbon support. The N atoms in the carbon support serve as the sites for the nucleation and uniform growth of Ni nanoparticles. The catalyst was used for the degradation of environmentally harmful 4-nitrophenol (4-NP) to 4-aminophenol (4-AP). Among all the catalysts investigated, Ni(10)@Co-N-C exhibited the highest catalytic activity for the hydrogenation of 4-NP, with a specific reaction rate of 6.1 × 10⁻³ s⁻¹, activity parameter of 31 s⁻¹g⁻¹, and turn over frequency (TOF) of 1.78 × 10¹⁹ molecules g_metal⁻¹s⁻¹. On the other hand, the specific reaction rate and TOF value were 1.7 × 10⁻³ s⁻¹ and 6.96 × 10¹⁸ molecules g_metal⁻¹s⁻¹, respectively, for Co−N−C. This suggests that Ni(10)@Co−N−C is about three times more catalytically active than the Co−N−C catalyst. The superb activity of Ni(10)@Co−N−C in comparison to Co−N−C can be ascribed to the homogeneous dispersion of small-sized Ni nanoparticles, the interconnected three-dimensional porous arrangement of the support Co−N−C, the presence of N atoms in the carbon framework that stabilize metal nanoparticles, and the synergistic electronic effect between Ni and Co. The Ni(10)@Co−N−C catalyst maintained consistent catalytic activity over multiple cycles, which suggests that porous N-containing carbon support can effectively prevent aggregation and leaching of metal nanoparticles. The ICP-AES analysis of the recycled Ni(10)@Co−N−C revealed a slight reduction in metal content compared to the fresh sample, suggesting almost negligible leaching of metal nanoparticles. Full article