Search Results (211,410)

In this study, the insufficient ability of tartary buckwheat protein (TBP) to stabilize Pickering emulsions was addressed by preparing TBP–sodium alginate (SA) composite particles via cross-linking and systematic optimization of the preparation parameters. The results showed that at a pH of 9.0 with 1.0% (w/v) TBP and 0.2% (w/v) SA, the zeta potential of the prepared TBP–SA composite particles was significantly more negative, and the particle size was significantly larger, than those of TBP, while emulsifying activity index and emulsifying stability index increased to 53.76 m²/g and 78.78%, respectively. Scanning electron microscopy confirmed the formation of a dense network structure; differential scanning calorimetry revealed a thermal denaturation temperature of 83 °C. Fourier transform infrared spectroscopy and surface hydrophobicity results indicated that the complex was formed primarily through hydrogen bonding and hydrophobic interactions between TBP and SA, which induced conformational changes in the protein. The Pickering emulsion prepared with 5% (w/v) TBP–SA composite particles and 60% (φ) oil phase was stable during 4-month storage, at a high temperature of 75 °C, high salt conditions of 600 mM, and pH of 3.0–9.0. The stabilization mechanisms may involve: (1) strong electrostatic repulsion provided by the highly negative zeta potential; (2) steric hindrance and mechanical strength imparted by the dense interfacial network; and (3) restriction of droplet mobility due to SA-induced gelation. Full article

Selecting an appropriate Multi-Criteria Decision-Making (MCDM) algorithm for optimizing marine diesel engine operation presents a complex challenge due to the diversity in mathematical formulations, normalization schemes, and trade-off resolutions across methods. This study systematically evaluates fourteen MCDM algorithms, which are grouped into five primary methodological categories: Scoring-Based, Distance-Based, Pairwise Comparison, Outranking, and Hybrid/Intelligent System-Based methods. The goal is to identify the most suitable algorithm for real-time performance optimization of two stroke marine diesel engines. Using Diesel-RK software, calibrated for marine diesel applications, simulations were performed on a variant of the MAN-B&W-S60-MC-C8-8 engine. A refined five-dimensional parameter space was constructed by systematically varying five key control variables: Start of Injection (SOI), Dwell Time, Fuel Mass Fraction, Fuel Rail Pressure, and Exhaust Valve Timing. A subset of 4454 high-potential alternatives was systematically evaluated according to three equally important criteria: Specific Fuel Consumption (SFC), Nitrogen Oxides (NO_x), and Particulate Matter (PM). The MCDM algorithms were evaluated based on ranking consistency and stability. Among them, Proximity Indexed Value (PIV), Integrated Simple Weighted Sum Product (WISP), and TriMetric Fusion (TMF) emerged as the most stable and consistently aligned with the overall consensus. These methods reliably identified optimal engine control strategies with minimal sensitivity to normalization, making them the most suitable candidates for integration into automated marine engine decision-support systems. The results underscore the importance of algorithm selection and provide a rigorous basis for establishing MCDM in emission-constrained maritime environments. This study is the first comprehensive, simulation-based evaluation of fourteen MCDM algorithms applied specifically to the optimization of two stroke marine diesel engines using Diesel-RK software. Full article

This study investigates the effects of rising temperatures on photosynthetic efficiency and stress tolerance in major Greek grapevine cultivars by using Sauvignon Blanc and Merlot as references. Muscat and Assyrtiko displayed the most heat-tolerant photosynthetic apparatus among the white cultivars, while Mavrodafni was the most heat-tolerant among the red ones, by effectively managing excess light energy. Sauvignon Blanc, although exhibiting heat susceptibility, maintained high photosystem II (PSII) functionality under heat stress by activating photoprotective mechanisms. Savvatiano and Agiorgitiko were more vulnerable to photo-oxidative stress above 35 °C, while Agiorgitiko maintained a functional photosynthetic apparatus, even at 40 °C, by shifting to a more photoprotective strategy. In contrast, Merlot, despite its resistance to photo-oxidative stress, lacked photoprotective investment, resulting in suppressed PSII under heat stress. Moschofilero was the most susceptible cultivar to photo-oxidative stress. Leaf morphological traits also contributed to heat stress tolerance, with smaller, thicker leaves facilitating thermoregulation. The present results provide important insights into specific responses to heat stress of major Greek grapevine cultivars. This knowledge may aid in selecting heat-tolerant genotypes and optimizing vineyard site selection, thereby enhancing the sustainability and climate resilience of viticulture. Full article

(1) Background: Pharmacist interventions are key to optimizing medication therapy and improving patient outcomes. The CLEO multidimensional tool assesses the clinical, economic, and organizational impact of these interventions, though its use in Portuguese hospital settings is limited. This study explored the predicted impact of pharmacist interventions in the Oncology Department of a Portuguese hospital, using CLEO to quantify their potential contribution to patient care and healthcare system efficiency;(2) Methods: A retrospective observational study was conducted at the hospital’s Oncology Outpatient Pharmacy between April and December 2024. Data from 144 pharmacist interventions were analyzed, focusing on drug-related problems, corrective actions, and CLEO scores. Descriptive statistics were used for data analysis; (3) Results: The most frequent drug-related problems were incorrect administration frequency (57.6%), drug interactions (22.2%), and incorrect dosing (10.4%). Nearly half of the interventions (47.2%) resulted in prescription corrections. CLEO analysis demonstrated a predicted positive clinical impact (80% of interventions scored 1C–3C), potential economic benefits (40.3% scored 1E), and organizational improvements (79.9% scored 1O), especially in lung, breast, and colorectal cancer treatments; (4) Conclusions: Pharmacist interventions were predicted to be associated with improvements in clinical, economic, and organizational outcomes in oncology care. These findings suggest that systematic documentation and evaluation of interventions using CLEO may enhance patient safety and healthcare efficiency, although further multicenter and prospective studies are needed to confirm these observations. Full article

EPS module buildings are prefabricated, low-rise systems with high thermal insulation that are widely used in rural self-built houses in northern China, yet their indoor thermal environments often suffer from instability. This study experimentally verified the effectiveness of microcapsule phase change mortar (PCM plaster) in improving winter indoor temperatures of EPS module houses. In addition, based on simulation data from 350 design combinations across five representative cold-climate cities and four envelope design variables, the study provides quantitative design guidance for EPS module walls and PCM plaster in rural houses, offering a practical approach to improve indoor thermal stability that has not been previously reported. The main findings are as follows: (1) The thermal transmittance of EPS module walls is the dominant factor influencing indoor thermal performance. For climate adaptability, Type II walls are recommended for severely cold regions, while Type I walls are suitable for cold regions. The application of PCM plaster is not recommended in solar-rich cold regions such as Lhasa due to limited effectiveness. (2) Optimal PCM plaster parameters exist, with the phase change temperature recommended to be 2–4 °C higher than the average indoor operative temperature during the heating period. Specifically, 18 °C is optimal for Type I walls in Yinchuan, Beijing, and Dalian, while 15 °C is more appropriate for Type II walls in Shenyang and Harbin. The corresponding optimal thicknesses are 20 mm for Harbin, Shenyang, and Dalian; 30 mm for Yinchuan; and 40 mm for Beijing, achieving a balance between indoor temperature improvement and construction cost. (3) Operative temperature and discomfort hours are introduced to assess indoor thermal stability, especially in buildings with interior PCM plaster. Full article

The use of molybdenum-based alloys as materials for components operating under high temperatures and significant mechanical loads is widely recognized due to their excellent mechanical properties. However, their low high-temperature resistance remains a critical limitation, which can be effectively mitigated by applying protective coatings. In this study, we investigate the influence of a two-step coating process on the properties and performance of the TZM molybdenum alloy. In the first step, pack cementation was performed. Simultaneous surface saturation with aluminum and silicon, a process known as aluminosiliconizing, was conducted at 1000 °C for 6 h. The saturating mixture comprised powders of aluminum, silicon, aluminum oxide, and ammonium chloride. The second step involved the application of a pre-ceramic coating based on polyhydrosiloxane modified with silicon and boron. This treatment effectively eliminated pores and cracks within the coating. Thermodynamic calculations were carried out to evaluate the likelihood of aluminizing and siliconizing reactions under the applied conditions. Aluminosiliconizing of the TZM alloy resulted in the formation of a protective layer 20–30 µm thick. The multiphase structure of this layer included intermetallics (Al₆₃Mo₃₇, MoAl₃), nitrides (Mo₂N, AlN, Si₃N₄), oxide (Al₂O₃), and a solid solution α-Mo(Al). Subsequent treatment with silicon- and boron-modified polyhydrosiloxane led to the development of a thicker surface layer, 130–160 µm in thickness, composed of crystalline Si, amorphous SiO₂, and likely amorphous boron. A transitional oxide layer ((Al,Si)₂O₃) 5–7 µm thick was also observed. The resulting coating demonstrated excellent structural integrity and chemical inertness in an argon atmosphere at temperatures up to 1100 °C. High-temperature stability at 800 °C was observed for both coating types: aluminosiliconizing, and aluminosiliconizing followed by the pre-ceramic coating. Moreover, additional oxide layers of SiO₂ and B₂O₃ formed on the two-step coated TZM alloy during heating at 800 °C for 24 h. These layers acted as an effective barrier, preventing the evaporation of the substrate material. Full article

A novel species of the genus Methylocystis is proposed based on polyphasic evidence from strain SC2^T, isolated from the heavily polluted Saale River near Wichmar, Germany. Digital DNA–DNA hybridization and phylogenomic analyses demonstrate that strain SC2^T represents a distinct species within the genus, clearly separated from its closest relatives, namely Methylocystis suflitae NLS-7^T, Methylocystis rosea SV97^T, Methylocystis silviterrae FS^T, and Methylocystis hirsuta CSC1^T. As is typical of the family Methylocystaceae, cells possess intracytoplasmic membranes arranged parallel to the cytoplasmic membrane, and the dominant fatty acids are C18:1ω8c and C18:1ω7c. The strain grows aerobically on methane as the primary carbon and energy source and expresses both low- and high-affinity particulate methane monooxygenase (pMMO), but lacks the soluble form. The species epithet reflects the strain’s ability to utilize hydrogen as an alternative energy source. A further feature is its use of asparagine as an osmoprotectant, enhancing salt tolerance. Genomic analysis reveals complete pathways for nitrogen fixation, denitrification, and hydrogen oxidation. These genetic and physiological characteristics support the designation of a novel species, for which the name Methylocystis hydrogenophila sp. nov. is proposed. The type strain is SC2^T (=DSM 114506 = NCIMB 15437). Full article

To counter the high unmet need for family planning in urban areas of Sindh province, Pakistan, Greenstar Social Marketing began implementation of The Challenge Initiative (TCI) in collaboration with the government departments of Population Welfare and Health in eight urban districts of Sindh province. This study aimed to assess the effectiveness of TCI’s Community Health Volunteers (CHVs) on public sector service provision of family planning services in eight urban districts of Sindh province, Pakistan. The Contraceptive Logistics Management Information System (cLMIS) and District Health Information System 2 (DHIS2) were used to obtain monthly contraceptive data from June 2022 to December 2024. CHVs began implementation at different time points in each district, starting from January 2023 to October 2023, when CHVs became operational in all eight districts. Descriptive statistics and two-sample t-tests were used for data analysis. CHVs significantly improved family planning service provision, particularly for short- and long-acting methods at the facility level, with greater change observed in Department of Health facilities. This study provides preliminary evidence of the effectiveness of CHVs in increasing public sector service provision of contraceptives, particularly for Department of Health facilities. CHVs bridge the gap between the community and the facility, particularly in areas uncovered by the government’s existing mobilization staff. Full article

The paper explores the application of heat pipes in thermal management for efficient heat dissipation, particularly in electrical equipment with high heat loads. Heat pipes are devices that transfer heat with high efficiency through the phase transition of the working medium (e.g., water, alcohol, ammonia) between the evaporator and the condenser, while they have no moving parts and are distinguished by their simplicity of construction. Different types of heat pipes—gravity, capillary, and closed loop (thermosiphon loop)—are suitable according to specific applications and requirements for the working position, temperature range, and condensate return transport. An example of an effective application is the removal of heat from the internal winding of a static energy converter transformer, where the use of a gravity heat pipe has enabled effective cooling even through epoxy insulation and kept the winding temperature below 80 °C. Other applications include the cooling of mounting plates, power transistors, and airtight cooling of electrical enclosures with the ability to dissipate lost thermal power in the order of 102 to 103 W. A significant advantage of heat pipes is also the ability to dust-tightly seal equipment and prevent the build-up of dirt, thereby increasing the reliability of the electronics. In the field of environmental technology, systems have been designed to reduce the radiant power of fireplace inserts by up to 40%, or to divert their heat output of up to about 3 kW into hot water storage tanks, thus optimising the use of the heat produced and preventing overheating of the living space. The use of nanoparticles in the working substances (e.g., Al₂O₃ in water) makes it possible to intensify the boiling process and thus increase the heat transfer intensity by up to 30% compared to pure water. The results of the presented research confirm the versatility and high efficiency of the use of heat pipes for modern cooling requirements in electronics and environmental engineering. Full article

This study presents a thermodynamic equilibrium analysis of hydrogen-rich syngas production via biomass–methane co-pyrolysis, employing the Gibbs free energy minimization method. A critical temperature threshold at 700 °C is identified, below which methanation and carbon deposition are thermodynamically favored, and above which cracking and reforming reactions dominate, enabling high-purity syngas generation. Methane addition shifts the reaction pathway towards increased reduction, significantly enhancing carbon and H₂ yields while limiting CO and CO₂ emissions. At 1200 °C and a 1:1 methane-to-biomass ratio, cellulose produces 50.84 mol C/kg, 119.69 mol H₂/kg, and 30.65 mol CO/kg; lignin yields 78.16 mol C/kg, 117.69 mol H₂/kg, and 19.14 mol CO/kg. The H₂/CO ratio rises to 3.90 for cellulose and 6.15 for lignin, with energy contents reaching 43.16 MJ/kg and 52.91 MJ/kg, respectively. Notably, biomass enhances methane conversion from 25% to over 53% while sustaining a 67% H₂ selectivity. These findings demonstrate that syngas composition and energy content can be precisely controlled via methane co-feeding ratio and temperature, offering a promising approach for sustainable, tunable syngas production. Full article

Encapsulation of lubricating agents has many advantages, as it helps to protect them from external factors, oxidation and degradation, can support their controlled and prolonged release, and also preserves the environment from accidental contamination with these substances. In our experiments various types of thermo-responsive, paraffin wax capsules capable of safely transporting liquid and semi-solid lubricants were designed, fabricated and tested. Lubricating oils were primarily encapsulated inside hemispherical wax shells closed with special caps, but also in wax spherocylinders and two-compartment structures. Greases were protected with wax coatings with the thickness ranging from 0.187 to 0.774 mm. The payload release from our core–shell capsules occurred not only due to the exerted mechanical force but also in a controlled manner upon prolonged contact with a heated surface. The wax shells of the capsules lying on the plate, whose temperature was increased at a rate of 0.025°C/s, began to melt gradually, starting from ≈55.5 °C. This temperature-triggered lubricant liberation can be useful when, for example, a machine element becomes excessively hot due to friction. The wax itself also has lubricating properties, so the crushed or melted coating cannot be treated as waste, but only as an additional factor supporting lubrication. The practical applications of our wax capsules were demonstrated with five examples. Full article

Integrating bioluminescent organisms as passive lighting sources in the built environment is currently a hot topic. However, there are several limitations facing the implementation and up-scaling of these naturally bioluminescent organisms in the built environment on architectural and urban scales, such as the scale, sensitivity, enclosure, and difficulty of maintenance. Moreover, there are complex technicalities and operational aspects of conventional bioreactors that host these bioluminescent agents, especially in terms of managing their recharge and effluent, not to mention their high maintenance cost. The current work offers a sustainable, stand-alone, bioluminescent urban screen system employing Aliivibrio fischeri CECT 524 bioink on 3D-printed customized scaffolds as bioreceptive panel design based on a field-diffusion pattern to host the bioluminescent bacterial bioink. The field-diffusion pattern was employed thanks to its proven efficiency in entrapment of the various microbial cultures. Three different growth media were tested for culturing Aliivibrio fischeri CECT 524, including Luria Bertani Broth (LB), the Tryptone Soy Broth (TSB), and the standard Marine Broth (MB). The results revealed that the Marine Broth (MB) media achieved the highest bioluminescent intensity and duration. The maximum light emission typically in range of ~490 nm of blue–green light captured by a conventional reflex camera (human eye vision) was observed for 10 consecutive days in complete darkness after 3–10 s, at a room temperature of 25 °C. This was visible mainly at the thin curvilinear peaks of the 3D-printed field pattern. P1 achieved the highest performance in terms of visible blue–green light, and a duration of 10 days of active bioluminescence was achieved without the need for refilling, thanks to the high number of peaks and narrow wells at <0.5 cm of its field-diffusion pattern. This study proves the efficiency of this biomimetic pattern in terms of the bioreceptivity of the bioluminescent bacterial bioink. Furthermore, the proposed 3D-printed urban screens proved their economic sustainability in terms of affordability and their minimized production processes, in addition to their easy maintenance and recharge. These results qualify these 3D-printed bioluminescent urban screens for easy and decentralized adoption and application on an architectural and urban scale. Full article

Conventional grain monitoring systems often rely on isolated data points (e.g., point-based temperature measurements), limiting holistic condition assessment. This study proposes a novel Mechanism and Data Driven (MDD) framework that integrates physical mechanisms with real-time sensor data. The framework quantitatively analyzes solar radiation and external air temperature effects on silo boundaries and introduces a novel interpolation-optimized model parameter initialization technique to enable comprehensive grain condition perception. Rigorous multidimensional validation confirms the method’s accuracy: The novel initialization technique achieved high precision, demonstrating only 1.89% error in Day-2 low-temperature zone predictions (27.02 m² measured vs. 26.52 m² simulated). Temperature fields were accurately reconstructed (≤0.5 °C deviation in YOZ planes), capturing spatiotemporal dynamics with ≤0.45 m² maximum low-temperature zone deviation. Cloud map comparisons showed superior simulation fidelity (SSIM > 0.97). Further analysis revealed a 22.97% reduction in total low-temperature zone area (XOZ plane), with Zone 1 (near south exterior wall) declining 27.64%, Zone 2 (center) 25.30%, and Zone 3 20.35%. For dynamic evolution patterns, high-temperature zones exhibit low moisture (<14%), while low-temperature zones retain elevated moisture (>14%). A strong positive correlation between temperature and relative humidity fields; temperature homogenization drives humidity uniformity. The framework enables holistic monitoring, providing actionable insights for smart ventilation control, condensation risk warnings, and mold prevention. It establishes a robust foundation for intelligent grain storage management, ultimately reducing post-harvest losses. Full article

Coptis trifolia (threeleaf goldthread) offers a valuable comparative system for investigating the evolution and regulation of benzylisoquinoline alkaloid (BIA) synthesis. In this study, we analyzed the leaf and root transcriptomes of C. trifolia using both long-read and short-read RNA-Sequencing. We assembled 41,926 unigenes (≥500 bp) and identified 37 genes related to BIA biosynthesis, including two transcription factors, bHLH1 and WRKY1. The number of BIA genes identified in C. trifolia was comparable to that in other Coptis species. Transcriptome analysis revealed that most of these genes were more highly expressed in roots than leaves. Consistent with previous studies, C. trifolia contained a single (S)-stylopine synthase (SPS) gene homolog, potentially multifunctional for (S)-canadine synthase (CAS), (S)-cheilanthifoline synthase (CFS), and SPS. Transcriptome and untargeted metabolomic data indicated greater variation in root samples than leaf samples, although slightly more differentially expressed transcripts and metabolites were observed in leaves. Targeted metabolite profiling showed higher BIA accumulation in roots, with epiberberine being the most abundant, followed by coptisine, berberine, and columbamine. These results provide essential genomic resources for comparative analysis of the BIA pathway across Ranunculaceae, targeted gene function studies for metabolic bioengineering, and conservation strategies for C. trifolia, a member of an early-diverging clade within the genus with limited genetic resources. Full article

Polycystic ovary syndrome (PCOS) is a prevalent endocrine disorder connected with insulin resistance (IR), low-grade inflammation, dyslipidemia, and altered adipokine secretion. We evaluated serum levels of leptin, adiponectin, visfatin, resistin, IL-6, and TNF-α in 150 women with PCOS, stratified by IR status (IR, n = 76; non-IR, n = 74), and examined their associations with anthropometric, metabolic, hormonal, inflammatory, and atherogenic parameters. Anthropometric data included body weight, height, BMI, waist circumference, and waist-to-height ratio (WHtR), while IR was assessed using HOMA-IR and the Matsuda index. Serum adipokines were measured using ELISA, and lipid parameters and atherogenic indices—including non-HDL cholesterol, AIP, leptin/adiponectin, and adiponectin/resistin ratios—were calculated. Women with IR had higher levels of leptin, visfatin, resistin, and TNF-α, and lower levels of adiponectin. Leptin correlated positively with weight, WHtR, HOMA-IR, and atherogenic indices. Adiponectin showed the strongest and most consistent associations with anthropometric indices, HOMA-IR, and the Matsuda index. Resistin was linked to IR indices and IL-6, and visfatin correlated negatively with HDL-C and insulin sensitivity. In a multivariate general linear model, WHtR, but not HOMA-IR, remained independently associated with higher leptin levels and with atherogenic indices. These findings suggest that in PCOS, central adiposity rather than IR explains a substantial part of the adverse adipokine and inflammatory profile, thereby contributing to elevated cardiometabolic risk and highlighting the need for targeted treatment strategies. Full article