Search Results (7,700)

Halophytes are increasingly recognized as sustainable crops that offer a wide range of nutrients. This study provides a nutritional characterization of annual (Salicornia europaea) and perennial (Sarcocornia fruticosa, Arthrocaulon macrostachyum) species of glasswort, collected from different coastal habitats in southern Italy. S. europaea was also cultivated under non-saline conditions. Results showed differences in mineral content, and bioactive compounds among genotypes, but they were modulated by environmental conditions, leading to significant site-specific variation. S. europaea, regardless of the collecting sites, exhibited the highest concentration of minerals (K, Ca, and Mg), chlorophylls, carotenoids, and phenolic compounds as well as antioxidant activity. A. macrostachyum stood out for its high flavonoid and sterol content, exhibiting other nutritional traits comparable to S. europaea when collected in a more arid site. A. macrostachyum and S. fruticosa displayed similar compositional features, showing the highest anthocyanin and iodine (187.8 µg 100 g⁻¹ FW, on average) content. Sodium and potassium—critical for hypertension management—varied, exceeding the recommended Na/K ratio (1) for human consumption, especially in A. macrostachyum grown close to the sea. The most promising result was observed in non-saline S. europaea and in an A. macrostachyum sample (1.7, on average). Overall findings confirm the potential of both annual and perennial glassworts as nutritionally rich, sustainable crops for marginal environments. Full article

Ecological stoichiometry, as a discipline investigating plant elemental coupling mechanisms, has become a research focus across various ecosystems. However, few studies have examined plant stoichiometric characteristics in the water–land ecotone of plateau karst lake wetlands. It remains unclear whether foliar nutrient contents and stoichiometric ratios in this transitional zone vary with flooding intensity. This study established three sampling gradients (near-water area, middle area, and far-water area) within the water–land ecotone of Caohai Lake wetland in Guizhou Plateau, measuring nutrient concentrations along with their stoichiometric ratios in leaves of three dominant plant species. The results revealed significant interspecific differences in leaf nitrogen (N), phosphorus (P), potassium (K), calcium (Ca) concentrations and N:P ratios among the three dominant species, while significant spatial variations were observed in N concentration and the C:N ratio across sampling locations. Correlation analysis demonstrated significant positive relationships among leaf N, P, and K concentrations, all showing negative correlations with C concentration. Phragmites australis exhibited significantly lower C:N and N:P ratios compared to Scirpus validus and Juncus effusus, suggesting its growth advantage through rapid nutrient acquisition. This species may serve as an efficient phytoremediator for N and P absorption from both soil and water. These findings provide valuable references for vegetation selection in constructed wetlands. Full article

Polymer-based superplasticizers represent an emerging class of additives in cement and concrete production with demonstrated effects on zeta potential, ion exchange, turbidity and rheological behavior during hydration. This study examines the influence of polymer-based grinding aids focusing on the dosage of A2 on the grinding performance of Portland cement. Among the tested additives, A2 exhibited superior dispersing ability and agglomeration-preventing activity, yielding a zeta potential of −8.98 mV. Correspondingly, the release of the ion concentration of Ca²⁺ decreased to 190 mg/L, while SO₄²⁻ increased to 400 mg/L, indicating enhanced ionic interaction at the optimal A2 dosage of 2.5 g. The turbidity tests further revealed that cement samples ground with 2.5 g of A2 remained homogeneously suspended for longer periods compared to other additives. Overall, the analysis of cement surface properties confirmed that polymer-based grinding aids, particularly A2, significantly improve the dispersion stability of cement particles during grinding. Full article

The rapid rise in atmospheric CO₂ concentrations has intensified the need for scalable, sustainable, and economically viable carbon sequestration technologies. This study introduces a cost-effective CaO/Ca(OH)₂-based mineralization process that not only enables efficient CO₂ removal but also allows the simultaneous recovery of high-purity calcite nanoparticles as value-added products. The process involves hydrating CaO, followed by controlled carbonation under optimized CO₂ flow rates, temperature conditions, and and additive use, yielding nanocrystalline calcite with an average particle size of approximately 100 nm. Comprehensive characterization using X-ray diffraction, transmission electron microscopy, and energy-dispersive X-ray spectroscopy confirmed a polycrystalline structure with exceptional chemical purity (99.9%) and rhombohedral morphology. Techno-economic analysis further demonstrated that coupling CO₂ sequestration with nanoparticle production can markedly improve profitability, particularly when utilizing CaO/Ca(OH)₂-rich industrial residues such as steel slags or lime sludge as feedstock. This hybrid, multi-revenue strategy—integrating carbon credits, nanoparticle sales, and waste valorization—offers a scalable pathway aligned with circular economy principles, enhancing both environmental and economic performance. Moreover, the proposed system can be applied to CO₂-emitting plants and facilities, enabling not only effective carbon dioxide removal and the generation of carbon credits, but also the production of calcite nanoparticles for diverse applications in agriculture, manufacturing, and environmental remediation. These findings highlight the potential of CaO/Ca(OH)₂-based mineralization to evolve from a carbon management technology into a platform for advanced materials manufacturing, thereby contributing to global decarbonization efforts. Full article

Tetracycline antibiotics are widely used, but their resistance to degradation and persistence in the environment pose a potential risk of inducing antibiotic resistance, creating significant threats to both the environment and human health. This study established a laccase–mediator system (LMS) using natural green tea polyphenols (GTPs) as mediators for efficient tetracycline degradation. Through analyzing the main GTP components and optimizing the reaction conditions, the degradation efficiency of the system was evaluated. The experimental results indicated that, among the various tea polyphenol components, epicatechin gallate (ECG) contributed the most significantly to the degradation efficiency. Under optimized conditions, the Lac-ECG system degraded over 98% of tetracycline within 3–4 min. Further optimization of the Lac-GTP system allowed us to identify the following optimal conditions: a GTP concentration of 1.0 mmol/L, laccase concentration of 1.0 mg/mL, pH of 6.0, and temperature of 25 °C. Under these conditions, a degradation rate of 95.07% was attained within 5 min, outperforming a system using the synthetic mediator ABTS. Additionally, metal ions such as Ca²⁺, Mg²⁺, Cu²⁺, Fe³⁺, Fe²⁺, and Ni²⁺ were found to enhance the degradation process, while Mn²⁺ and Hg²⁺ exhibited inhibitory effects. Antibacterial activity tests revealed that the degradation products completely lost their antimicrobial activity, demonstrating effective detoxification of tetracycline. In conclusion, the tea polyphenol-based laccase–mediator system developed in this study exhibits high efficiency, cost-effectiveness, and environmental friendliness, offering a promising strategy for the remediation of tetracycline-contaminated environments. Full article

Vibrio parahaemolyticus is a primary foodborne pathogen in seafood that endangers consumers’ health. It is vital to develop novel prevention and control strategies due to its extensive transmission and drug resistance. This work aimed to examine the antibacterial and anti-virulence efficiency of chlorogenic acid (CA) against V. parahaemolyticus. The minimum inhibitory concentration (MIC) of CA is 6 mg/mL. CA realized its antibacterial effect by damaging the cell wall and membrane, evidenced by the leakage of alkaline phosphatase, intracellular proteins and nucleic acids, potassium ion, and glucose, the increasing malondialdehyde and reactive oxygen species, as well as morphological observations under scanning and transmission microscopes and live and dead cell observations under laser confocal microscopy. When V. parahaemolyticus was treated with CA at sub-inhibitory doses, its hydrophobicity, extracellular polysaccharide synthesis, motility, and biofilm formation were all significantly inhibited. Moreover, CA effectively protected salmon from the contamination of V. parahaemolyticus with a prolonged shelf life. These findings indicate that CA possesses antibacterial activity against V. parahaemolyticus, suggesting its potential value for controlling V. parahaemolyticus-associated seafood infections. Full article

Background: Hepatocellular carcinoma (HCC) is a highly lethal malignancy with limited therapeutic options. Arctigenin (ARC), a natural lignan derived from Saussurea medusa, exhibits anti-cancer activity, but its mechanism against HCC remain incompletely elucidated. Methods: This study integrated network pharmacology, molecular docking, molecular dynamics, in vitro, and in vivo experiments to investigate ARC’s anti-HCC effects. Results: Seventy-five potential targets shared between ARC and HCC were identified, with KEGG analysis highlighting the PI3K/AKT pathway as central. ARC showed strong binding to key proteins, and molecular dynamics indicated stable interactions with PIK3CA and GSK3B. In HepG2 cells, ARC inhibited proliferation in a dose- and time-dependent manner (IC50: 11.17 μM at 24 h, 4.888 μM at 48 h), induced apoptosis at high concentrations, suppressed PIK3CA phosphorylation, and increased GSK3B (Ser9) phosphorylation. In H22 tumor-bearing mice, ARC dose-dependently inhibited tumor growth (high dose: 50.6% vs. 63.0% for CTX) with minimal weight loss. Conclusions: These findings suggest ARC suppresses HCC by modulating the PI3K/AKT pathway, providing evidence for its development as a plant-derived therapeutic agent. Full article

The karst landscape of Trenggalek Regency, located in several sub-districts including Dongko, Kampak, and Watulimo, is shaped by the Wonosari Formation and is characterized by springs and underground rivers. Due to water scarcity in the region, local communities heavily depend on these natural water sources. This study assesses the groundwater quality of 16 springs and 20 underground rivers to evaluate their suitability for consumption and associated health risks. Using the groundwater quality index (GWQI), human health risk assessment (HHRA), and statistical methods, various physicochemical parameters were analyzed, including pH, total dissolved solids (TDS), electrical conductivity (EC), and concentrations of iron (Fe²⁺), manganese (Mn²⁺), calcium carbonate (CaCO₃), and sulfate (SO₄). Water generally meets the World Health Organization standards for safe drinking. However, correlation analysis reveals notable mineral dissolution and possible anthropogenic influence. TDS strongly correlates with EC (r = 0.97), while Fe²⁺ shows significant relationships with Mn and TDS. Conversely, CaCO₃ shows a negative correlation with EC and TDS, suggesting alternative sources beyond rock weathering. The HHRA indicates higher non-carcinogenic health risks from Fe²⁺ contamination in underground rivers compared to springs. The study’s novelty comes in its integrated assessment of groundwater quality and health hazards in Trenggalek’s karst region, which uses GWQI, HHRA, and statistical analysis to show geochemical interactions and highlight iron-related health issues in underground rivers. Full article

Background: Cadmium (Cd) pollution poses a significant environmental challenge. Microbially induced carbonate precipitation (MICP), an advanced bioremediation approach, relies on the co-precipitation of soluble metals with the microbial hydrolysate from urea. This study isolated a urease-producing strain and evaluated its Cd remediation potential. Methods: The isolated strain UA7 was identified through 16S rDNA gene sequencing. Urease production was enhanced by optimizing the culture conditions, including temperature, dissolved oxygen levels—which were affected by the rotational speed and the design of the Erlenmeyer flask, and the concentration of urea added. Its Cd remediation efficacy was assessed both in water and soil. Results: UA7 was identified as Lysinibacillus sp., achieving peak urease activity of 188 U/mL. The immobilization rates of soluble Cd reached as high as 99.61% and 63.37%, respectively, at initial concentrations of 2000 mg/L in water and 50 mg/kg in soil. The mechanism of Cd immobilization by strain UA7 via MICP was confirmed by the microstructure of the immobilized products with attached bacteria, characteristic absorption peaks, and the formed compound Ca_0.67Cd_0.33CO₃, which were analyzed using scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), and X-ray diffraction (XRD). The Cd-remediation effect of strain UA7, which reduces lodging in wheat plants, prevents the thinning and yellowing of stems and leaves, and hinders the transition of soluble Cd to the above-ground parts of the plant, was also demonstrated in a pot experiment. Conclusions: Therefore, Lysinibacillus sp. UA7 exhibited high potential for efficiently remediating contaminated Cd. Full article

Bi₂Sr₂CaCu₂O_8+x (Bi2212) high-temperature superconductor exhibits broad application prospects in strong magnetic fields, superconducting magnets, and power transmission due to its exceptional electrical properties. However, during practical applications, Bi2212 superconducting round wires are prone to mechanical loading effects, leading to crack propagation and degradation of superconducting performance, which severely compromises their reliability and service life. To elucidate the damage mechanisms under mechanical loading and their impact on critical current, this study establishes a two-dimensional model with existing cracks based on phase field fracture theory, simulating crack propagation behaviors under varying conditions. The results demonstrate that crack nucleation and propagation paths are predominantly governed by stress concentration zones. The transition zone width of cracks is controlled by the phase field length scale parameter. By incorporating electric fields into the phase field model, coupled mechanical-electrical simulations reveal that post-crack penetration causes significant current shunting, resulting in a marked decline in current density. The research quantitatively explains the mechanism of critical current degradation in Bi2212 round wires under tensile strain from a mechanical perspective. Full article

The inhibition mechanism and binding properties of four phenolic acids (ferulic acid (FA), p-coumaric acid (CA), gallic acid (GA), and protocatechuic acid (PA)) on xanthine oxidase (XOD) were investigated. All four phenolic acids acted via a mixed inhibition pattern, mainly influencing the hydrophobic regions and secondary conformation of XOD through hydrophobic bonding and hydrophobic association. Molecular dynamics simulations exhibited that the complexes of XOD with FA and CA revealed smaller radii of gyration (Rg) and solvent-accessible surface areas (SASA), along with lower variability in root-mean-square deviation (RMSD) and root-mean-square fluctuation (RMSF), collectively indicating greater structural stability. FA, CA, and PA significantly reduced uric acid (UA) concentration in the 25–100 μM range. Although GA only reduced UA levels in cell models at 25 μM, this effect was likely due to its larger polar surface area, which limits cellular uptake. Absorption, distribution, metabolism, excretion, and toxicity (ADMET) evaluation suggested that these phenolic acids have potential for development. Full article

The aim of this study is to determine the spatial distribution of geochemical anomalies of selected potential toxic elements in the soils of the river basins in the Northeastern Caucasus—specifically the Ulluchay, Sulak, and Sunzha Rivers. A concentration of 25 chemical elements was measured using inductively coupled plasma mass spectrometry (ICP-MS). Petrogenic elements commonly found in the Earth’s crust (Al, Na, Ca, Fe, Mg) showed high concentrations (Na up to 306,600.70 mg/kg). Conversely, concentrations of Ag, Cd, Sn, Sb, and Te at many sampling sites were extremely low, falling below the detection limits of analytical instruments. The geochemical indicators Cf (contamination factor) and Igeo (geoaccumulation index) indicate that the regional characteristics of the territory, such as lithological conditions, hydrochemical schedules, and the history of geological development of the territory, affect the concentration of elements. Anomalous concentrations were found for seven elements (Ba, Na, Zn, Ag, Li, Sc, As), whereas no anomalies were identified for Be, Mg, Al, Mn, Fe, Co, Ni, Cu, Pb, Te, and Cs. For the most part (8 of 10), the sampling sites with anomalous chemical element content are located in the basin of the Sunzha River. Two sites with anomalous chemical element content have been identified in the Sulak River Basin. Anomalous values in the Sulak River Basin are noted for two chemical elements—Ba and Na. Natural features such as geological structure, parent rock composition, vertical climatic zonation, and landscape diversity play a major role in forming geochemical anomalies. The role of anthropogenic factors increases in localized areas near settlements, industrial facilities, and roads. The spatial distribution of geochemical anomalies must be considered in agricultural management, the use of water sources for drinking supply, the development of tourist routes, and comprehensive spatial planning. Full article

As the direct energy source in organisms, accurate and simple detection of adenosine triphosphate (ATP) is of great significance. Herein, a colorimetric aptasensor for ATP determination was designed by integrating the CRISPR/Cas12a system with an aptamer, and with Prussian blue nanocube and gold nanoparticle co-functionalized MoS₂ (MoS₂-PBNCs-AuNPs) nanozymes. As expected, the introduced CRISPR/Cas12a system and aptamer could efficiently amplify the detection signal and improve the specific recognition ability, respectively. Meanwhile, the catalytic activity of the MoS₂-PBNCs-AuNPs nanozymes can be regulated with the concentration of ATP. The high-affinity binding of ATP to the aptamer competitively inhibited aptamer-crRNA hybridization, causing fewer Cas12 proteins to be activated. As a result, the uncleaved single-stranded DNA (ssDNA) adsorbed onto the surface of nanozymes to effectively enhance their catalytic oxidation capability toward 3,3′,5,5′-tetramethylbenzidine (TMB). According to this phenomenon, this CRISPR-enhanced colorimetric aptasensor can detect down to 0.14 μM ATP with high selectivity, reproducibility, and stability. In addition, acceptable recoveries and low relative standard deviations of the aptasensor for ATP determination suggest that it is promising for application in early detection of clinical-related diseases. Full article

Land degradation in Iraq’s Mesopotamian plain threatens food security and rural livelihoods, yet the relative roles of climatic water deficits versus anthropogenic pressures remain poorly attributed in space. We test the hypothesis that multi-timescale climatic water deficits (SPEI-03/-06/-12) exert a stronger effect on vegetation degradation risk than anthropogenic pressures, conditional on hydrological connectivity and irrigation. Using Babil and Al-Qadisiyah (2000–2023) as a case, we implement a four-part pipeline: (i) Fractional Vegetation Cover with Mann–Kendall/Sen’s slope to quantify greening/browning trends; (ii) LandTrendr to extract disturbance timing and magnitude; (iii) annual LULC maps from a Random Forest classifier to resolve transitions; and (iv) an XGBoost classifier to map degradation risk and attribute climate vs. anthropogenic influence via drop-group permutation (ΔAUC), grouped SHAP shares, and leave-group-out ablation, all under spatial block cross-validation. Driver attribution shows mid-term and short-term drought (SPEI-06, SPEI-03) as the strongest predictors, and conditional permutation yields a larger average AUC loss for the climate block than for the anthropogenic block, while grouped SHAP shares are comparable between the two, and ablation suggests a neutral to weak anthropogenic edge. The XGBoost model attains AUC = 0.884 (test) and maps 9.7% of the area as high risk (>0.70), concentrated away from perennial water bodies. Over 2000–2023, LULC change indicates CA +515 km², HO +129 km², UL +70 km², BL −697 km², WB −16.7 km². Trend analysis shows recovery across 51.5% of the landscape (+29.6% dec⁻¹ median) and severe decline over 2.5% (−22.0% dec⁻¹). The integrated design couples trend mapping with driver attribution, clarifying how compounded climatic stress and intensive land use shape contemporary desertification risk and providing spatial priorities for restoration and adaptive water management. Full article

The current state of the art research, and latest engineering technology application in the synthesis of the aragonite crystalline phase of calcium carbonate is presented here. Aragonite crystalline products are highly valuable in selected industries, such as medical and personal care, and in food additives using MgCl₂ as a chemical inducer. The outcome of this literature review provides the outlook of the available research whitespace opportunity in optimizing the current process parameters and in ensuring that sustainable and economically feasible continuous production of aragonite products could be achieved. One of the major improvements proposed in this study is to investigate the methods of synthesizing aragonite crystalline particles using a continuous mineral carbonation reactor system and optimizing the operating parameters. An experimental design was established to identify all the main effects to maximize aragonite production. The three main effects investigated are the effect of feedstock or reactant concentration, the effect of reaction temperature, and the effect of reaction time towards aragonite yield in the final products synthesized. An optimized operating parameter for maximum aragonite yield at 95% purity was proposed at the reaction temperature T of 90 °C, reaction time t of 10 min, and feedstock ratio Mg-to-Ca of 0.4. Subsequently, the continuous reactor system was designed, operated, and tested for at least 50 h operation, where the lime CaO(s) feed was successfully converted into aragonite products with purity between 75 and 81%. The properties and quality of the aragonite produced were analytically characterized from the following laboratory methods which include the thermalgravimetric analysis, TGA; X-Ray Diffraction, XRD; scanning electron microscopy, SEM; and induction coupled plasma, ICP. TGA mass balance after decomposition suggests that 44% of the mass balance represents the weight of CO₂ sequestered in the aragonite crystalline carbonates. Hence, the aragonite crystalline carbonates can be labeled as a green product which sequesters 0.44 kg of CO₂ per 1 kg of precipitated aragonite products synthesized. Interestingly, SEM microscopy characterization results revealed that the aragonite precipitate has a physical morphology of needle-like shape with a good aspect ratio (length/diameter) AR of between 8.67 micron and 11.35 micron. The properties were found to be suitable for paper making fillers, medical, personal care, and food additive applications. Full article