Search Results (821)

The narrow operating temperature window of commercial V-W/TiO₂ catalysts severely limits NO_x removal efficiency, especially during low-load boiler operations. To achieve broad-temperature NO_x abatement, we developed Ce-M/Ti (M = Co, Fe, Mn, Mo) catalysts via a dual-site strategy. The temperatures required for 80% NO conversion (T₈₀) were 302 °C for Ce-Mo/Ti, 372 °C for Ce-Fe/Ti, 393 °C for Ce-Mn/Ti, and 415 °C for Ce-Co/Ti. Among them, Ce-Mo/Ti exhibited the most favorable low-temperature activity, outperforming a commercial catalyst (324 °C). Its turnover frequency (3.12 × 10⁻³ s⁻¹) was 1.29 times higher. Combined physicochemical characterization and density functional theory (DFT) calculations further reveal the mechanism behind the enhanced dual-site synergy in Ce-Mo/Ti. In the Ce-Co, Ce-Fe, and Ce-Mn sites, weak orbital hybridization leads to limited charge transfer. In contrast, Ce-Mo/Ti exhibits stronger hybridization between the Ce 4f/5d and Mo 4d orbitals, which breaks the inherent limitation of the Ce-based (Ce³⁺/Ce⁴⁺) redox capability and enables reverse electron transfer from Mo to Ce. This distinctive electron transfer direction creates a unique electronic environment, activating an efficient redox cycle between Mo⁶⁺/Mo⁵⁺ and Ce⁴⁺/Ce³⁺. This work offers a promising design strategy for dual-site catalysts with high NO_x removal efficiency over a wide temperature range. Full article

A novel Ag(I) coordination polymer, [Ag₂(bipy)(btca)]_n, (SCP 1) was synthesized using 4,4′-bipyridyl (bipy) and 1,2,4,5-benzene-tetracarboxylic acid (H₄BTC). Characterization by FT-IR, ¹H/¹³C NMR, and single-crystal X-ray diffraction confirmed its 3D network structure. The structure of SCP 1 consists of two chains arranged in …ABAB… fashion. Chain A is one-dimensional, containing [Ag(4,4′-bipy)]_n chain, while chain B is free, containing uncoordinated 1,2,4,5-benzene tetracarboxylate and water molecules. The stacking and argentophilic interactions extend the chain A of [Ag(4,4′-bipy)]_n into a two-dimensional layer. In contrast, chain B of uncoordinated 1,2,4,5-benzene tetracarboxylate and water molecules form a 1-D chain through extensive hydrogen bonds between water molecules and BTC ions and between water molecules themselves. Chains A and B are connected through extensive hydrogen bonds, generating a three-dimensional network structure. This Silver I supramolecular coordination polymer (SCP 1) demonstrated high catalytic activity as a recyclable heterogeneous catalyst for the synthesis of 5-substituted 1H-tetrazoles via [3+2] cycloaddition of NaN₃ and terminal nitriles under solvent-free conditions in a Q-tube pressure reactor (yields: 94–99%). A mechanistic proposal involving cooperative Lewis acidic Ag(I) sites and Brønsted acidic -COOH groups facilitates the cycloaddition and protonation steps. SCP 1 catalyst exhibits reusability up to 4 cycles without significant loss of activity. The structural stability of the SCP 1 catalyst was assessed based on PXRD and FTIR analyses of the catalyst after usage, confirming its integrity during the recycling process. Full article

The desert riparian forest oasis, dominated by Populus euphratica and Tamarix chinensis, is an important barrier to protect the economic production and habitat of the Tarim River Basin. However, there is still a lack of high-precision spatial distribution data of desert ri-parian forest species below 10 m. The recently launched PlanetScope CubeSat constella-tion, which provides daily earth observation imagery with a resolution of 3 m, offers a highly favorable dataset for mapping the high-resolution distribution of P. euphratica and T. chinensis and an unprecedented opportunity to explore the optimal phenology window to distinguish between them. In this study, time-series PlanetScope images were first used to extract phenological metrics of P. euphratica, dividing the annual life cycle into four phenology windows: duration of leaf expansion (DLE), duration of leaf maturity (DLM), duration of leaf fall (DLF), and duration of the dormancy period (DDP). The random forest model was used to obtain the classification accuracy of 16 phenological window combinations. Results indicate that after gap filling of vegetation index time series, the identification accuracy for P. euphratica and T. chinensis exceeded 0.90. Among individual phenology windows, the DLE window exhibited the highest classification accuracy (average F1-score 0.87). Among the two phenology window combinations, the DLE-DLF and DLE-DLM windows have the highest classification accuracy (average F1-score 0.90). Among the three phenology window combinations, DLE-DLM-DLF displayed the highest classification accuracy (average F1-score 0.91). Nevertheless, the inclusion of features within the DDP window led to a decrease in accuracy by 1–2% points, which was unfavorable for discriminating tree species. Additionally, features observed during the phenology asynchrony period were found to be more valuable for distinguishing between tree species. Our findings highlight the potential of PlanetScope constellation imagery in tree species classification, offering guidance for selecting optimal image acquisition timing and identifying the most valuable images within time series data for future large-scale tree mapping. Full article

The escalating issue of water pollution driven by rapid industrialization necessitates the development of advanced remediation technologies. In this study, a novel method for producing chromium (Cr(VI)) ion-imprinted biochar (Cr(VI)-IIP-PEI@NBC) from wheat residue was proposed. After acid-oxidative modifications, polyethyleneimine (PEI) and glutaraldehyde (GA) were employed as the functional monomer and crosslinker, respectively, to enhance the biochar’s selectivity and adsorption capacity. Under optimized conditions (pH 2.0, 55 °C), the adsorbent achieved a maximum Cr(VI) uptake of 212.63 mg/g, which was 2.3 times higher than that of the non-imprinted biochar. The material exhibited exceptional specificity (99.64%) for Cr(VI) and maintained >80% adsorption efficiency after five regeneration cycles, demonstrating excellent reusability. Comprehensive structural characterization via Fourier transform infrared spectroscopy (FT-IR), thermal gravimetric analysis (TGA), Brunner–Emmet–Teller measurements (BET), and Scanning Electron Microscopy (SEM) confirmed successful Cr(VI) imprinting in the biochar and its high thermal stability and mesoporous architecture, elucidating the mechanisms behind its superior performance. This study presents a sustainable and high-performance adsorbent for the efficient treatment of chromium-contaminated wastewater, with significant potential for industrial applications. Full article

We present a quantitative theory of contraction and expansion cycles within the Quantum Memory Matrix (QMM) cosmology. In this framework, spacetime consists of finite-capacity Hilbert cells that store quantum information. Each non-singular bounce adds a fixed increment of imprint entropy, defined as the cumulative quantum information written irreversibly into the matrix and distinct from coarse-grained thermodynamic entropy, thereby providing an intrinsic, monotonic cycle counter. By calibrating the geometry–information duality, inferring today’s cumulative imprint from CMB, BAO, chronometer, and large-scale-structure constraints, and integrating the modified Friedmann equations with imprint back-reaction, we find that the Universe has already completed $N_{\mathrm{past}}=3.6\pm 0.4$ cycles. The finite Hilbert capacity enforces an absolute ceiling: propagating the holographic write rate and accounting for instability channels implies only $N_{\mathrm{future}}=7.8\pm 1.6$ additional cycles before saturation halts further bounces. Integrating Kodama-vector proper time across all completed cycles yields a total cumulative age $t_{\mathrm{QMM}}=62.0\pm 2.5\mathrm{Gyr}$, compared to the $13.8\pm 0.2\mathrm{Gyr}$ of the current expansion usually described by $\mathrm{\Lambda }$CDM. The framework makes concrete, testable predictions: an enhanced faint-end UV luminosity function at $z\gtrsim 12$ observable with JWST, a stochastic gravitational-wave background with $f^{2/3}$ scaling in the LISA band from primordial black-hole mergers, and a nanohertz background with slope $\alpha \simeq 2/3$ accessible to pulsar-timing arrays. These signatures provide near-term opportunities to confirm, refine, or falsify the cyclical QMM chronology. Full article

To date, the grinding behavior of saprolite and lateritic overburden mixtures remains poorly understood. The Bond Work Index (BWI) is the principal indicator used to determine the specific energy consumption during the grinding process. To establish the F₈₀ and P₈₀ values, granulometric distribution models—Rosin–Rammler (RR), Gates–Gaudin–Schuhmann (GGS), and the Swebrec function (SWEF)—were evaluated. The mineral phases of the feed samples were analyzed by X-ray powder diffraction. This study provides evidence that the RR function is the most suitable for simulating the particle size distribution of the feed material, with residual errors below 6.30% and a coefficient of determination (R²) exceeding 97%. After the grinding equilibrium cycle is reached, the SWEF model proves to be the most appropriate, exhibiting residual errors under 3.50% and R² values above 98%. BWI reveals that saprolite is the most difficult ore to grind, with specific energy consumption increasing from 16.38 kWh/t to 25.50 kWh/t as the proportion of saprolite in the mixture rises. This reflects a clear upward trend, as confirmed by a fitted model with an R² of 98.54%. In contrast, the grindability index (Gbp) decreases, indicating that the material becomes increasingly resistant to grinding as the saprolite content increases. This may be attributed to inherent material properties, such as hardness, or to physical phenomena related to fragmentation. The declining Gbp further suggests that greater energy input is required to achieve additional particle size reduction. Overall, the findings demonstrate that saprolite is inherently difficult to grind and behaves according to its own grinding characteristics, regardless of whether it is processed alone or in combination with lateritic overburden. Full article

In response to the increasing demand for environmentally friendly and cost-effective adsorbents in wastewater treatment, this study reports the green synthesis, characterization, and application of a magnetic epichlorohydrin Rosa canina (m-ECH-RC) nanocomposite for removing Safranin O (SO), a commonly used cationic dye in textile effluents. The synthesized material was characterized using Brunauer–Emmett–Teller (BET), Fourier transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), X-ray diffraction (XRD), and zeta potential analyses to reveal its surface morphology, pore structure, functional groups, crystallinity, and colloidal stability. Adsorption performance was systematically tested under various conditions, including pH, adsorbent dose, contact time, ionic strength, and initial dye concentration. Kinetic analyses revealed that the adsorption process of Safranin O dye mainly obeys pseudo-second-order kinetics, but intraparticle and film diffusion also contribute to the process. As a result of the Isotherm analysis, it was found that the adsorption process conformed to the Langmuir model. Testing on real textile wastewater samples demonstrated a removal efficiency of 75.09% under optimized conditions. Reusability experiments further revealed that the material maintained high adsorption–desorption performance for up to five cycles, emphasizing its potential for practical use. These findings suggest that m-ECH-RC is a viable and sustainable adsorbent for treating dye-laden industrial effluents. Full article

GpsB is a conserved cell-cycle regulator in the Firmicute clade of Gram-positive bacteria that coordinates multiple aspects of envelope biogenesis. Recent studies demonstrate interactions between GpsB and the key division cytoskeleton FtsZ, suggesting that GpsB links cell division to various aspects of cell envelope biogenesis in Staphylococcus aureus and potentially other Firmicutes. We determined a 1.7 Å resolution crystal structure of the N-terminal domain of Staphylococcus aureus GpsB, revealing an asymmetric dimer with a bent conformation. This conformation is nearly identical to one of two conformations reported by Sacco et al., confirming the unique conformation of S. aureus GpsB compared to other Gram-positive bacteria. This structural agreement provides strong validation of the S. aureus GpsB fold and supports its proposed role in organizing the cell division machinery. Full article

The rising demand for convenient, nutritious foods necessitates improved freeze–thaw (F-T) stability in frozen fish balls; however, traditional thermal processing fails to prevent moisture loss, textural degradation, and oxidation. Therefore, this study systematically investigated the effect of ultra-high pressure (UHP) treatment on the quality of golden pomfret fish balls (Trachinotus ovatus) using two-step heating as a control during the F-T cycles. The results showed that compared to two-step heating, UHP significantly reduced the thawing loss (0.68 times) and centrifugal water loss (2.43 times) by enhancing the water-binding capacity (15–20%) and forming denser gel networks. Microstructural analysis revealed that UHP resulted in a more compact internal structure, reduced porosity, altered ice-crystal geometry, and a slower recrystallization rate of the fish balls. Furthermore, UHP effectively reduced protein oxidation (34.53% lower carbonyl increase) and lipid peroxidation (15.6% lower TBARS value) after five F-T cycles compared to the control. Correlation analysis confirmed the dual role of UHP in the regulation of oxidative and structural stability. These findings provide a new technological approach for processing and storing fish balls. Full article

The response of the microscopic structure and macroscopic mechanical parameters of SRM under F–T cycles is a key factor affecting the safety and stability of engineering projects in cold regions. In this study, F–T tests, EIS, and uniaxial compression tests were conducted on SRM. The construct equivalent model of different conductive paths based on EIS was constructed. A peak strength prediction model was developed using characteristic parameters derived from the equivalent models, thereby revealing the mechanism by which F–T cycles influenced both microscopic structure and macroscopic strength. The results showed that with increasing cycles, both $R_{CP}$ and $R_{CPP}$ exhibited an exponential decreasing trend, whereas C_DSRP and D_f increased exponentially. Peak strength and peak secant modulus decreased exponentially, but peak strain increased exponentially. The expansion and interconnection of pores with different radii within $CPP$ and $CP$ caused smaller pores to evolve into larger ones while generating new pores, which led to a decline in $R_{CPP}$ and $R_{CP}$. Moreover, this expansion enlarged the soil–rock contact area by connecting adjacent gas-phase pores and promoted the transformation of $CSRPP$ into $DSRPP$, enhancing the parallel-plate capacitance effect and resulting in an increase in $C_{DSRP}$. Moreover, the interconnection increased the roughness of soil–soil and soil–rock contact surfaces, leading to a rising trend in $D_f$. The combined influence of $C_{DSRP}$ and $D_f$ yielded a strength prediction model with higher correlation than a single factor, providing more accurate predictions of UCS. However, the increases in $C_{DSRP}$ and $D_f$ induced by F–T cycles also contributed to microscopic structure damage and strength deterioration, reducing the load-bearing capacity and ultimately causing a decline in UCS. Full article

With the increasing demand for soil modification technologies in the field of civil engineering, this study employed cement-stabilized soil and MBER (Material Becoming Earth into Rock) stabilized soil as controls to investigate the modification effects of an N-MBER (nanosilica reinforced MBER) stabilizer on the mechanical properties and microstructure of loess. The mechanical and water stability characteristics of N-MBER-stabilized loess under varying moisture contents and compaction degrees were analyzed through unconfined compressive strength (UCS) tests, softening coefficient tests, falling-head permeability tests, and wet–dry cycle tests. Combined with scanning electron microscopy (SEM), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), and nuclear magnetic resonance (NMR) techniques, the underlying mechanism of the N-MBER stabilizer in loess stabilization was thoroughly revealed. The results indicate that the N-MBER stabilizer significantly enhances the UCS and softening coefficient of loess. Particularly, under conditions of 28-day curing, a moisture content of 16%, and a compaction degree of 1, the compressive strength achieves a local optimum value of 3.68 MPa. Compared to soils stabilized with MBER stabilizers and cement stabilizers, the N-MBER-stabilized loess exhibits superior water resistance and microstructural density, with a significant reduction in the proportion of pore defects. Specifically, after five wet–dry cycles at a curing age of 28 days, the strength loss rates for MBER-stabilized soil and cement-stabilized soil were 24.4% and 27.54%, respectively, while that for N-MBER-stabilized soil was 18.23%, demonstrating its enhanced water resistance. Additionally, compared to cement-stabilized soil, the N-MBER-stabilized soil exhibited a 21.63% reduction in total pore number, with a 41.64% reduction specifically in large pores. The extremely small particle size and large specific surface area of the nanomaterial enable more effective interactions with soil particles, promoting hydration reactions. The resulting ettringite (AFt) and three-dimensional networked C-S-H gel tightly interweave with soil particles, forming a stable cemented structure. Compared to traditional concrete roads, stabilized soil roads enable the utilization of locally available materials and demonstrate a significant cost advantage. This study provides theoretical support and experimental evidence for the application of nanomaterials in loess improvement engineering. Full article

Enzyme-induced carbonate precipitation (EICP), an environmentally friendly geotechnical reinforcement method, is commonly adopted in water conservancy infrastructure, like reservoir bank slopes. Currently, limited studies have been performed on the mechanical and structural properties of EICP-solidified soil (ES) under freeze–thaw (F-T) cycles. In this study, a series of unconfined compressive strength (UCS) tests were performed to investigate the strength degradation characteristics and failure modes of ES and untreated soil (US) under a various number of F-T cycles. The “freeze–thaw structural parameter M_σ” and “initial freeze–thaw structural parameter M_p” were established to study the structural evolution laws of ES with strain and number of F-T cycles. Finally, the effect of F-T cycles on the microscopic pore structure of soil was investigated. The results indicated that the ES exhibited good strength retention capabilities subjected to F-T cycles. After one F-T cycle, the strength loss rate of the US was as high as 69.33%, while that of the ES was only 64.69% after 15 F-T cycles. The “freeze–thaw structural parameter M_σ” and the “initial freeze–thaw structural parameter M_p” presented the enhancement degree of structural strength and stabilization of ES under F-T cycles. The M_σ with strain could be divided into three stages. The nonlinear fitting results regarding the M_p showed a negative logarithmic relationship with the number of F-T cycles. With various F-T cycles, the pore area ratio of ES increased by an average of 0.603%, lower than that of US, 1.19%. After 10 to 15 F-T cycles, the Feret diameter reduction in ES was only 0.015 μm, which was 7% of the US, verifying the macroscopic test results. In the design of the reservoir slope, M_p and M_σ can be used to evaluate the deterioration of mechanical and structural properties after freeze–thaw disturbance, and to predict the stress and deformation response. Full article

This study investigates the influence of freeze–thaw (F–T) cycles on the seismic fragility of double-column bridge piers. Mechanical tests were conducted on standard concrete specimens subjected to 0, 25, 50, 75, and 100 F–T cycles using an HC-HDK9/F rapid freeze–thaw testing machine. The experimental results were used to calibrate and validate the applicability of the selected concrete constitutive model. A nonlinear finite element model of a double-column bridge pier was developed in the OpenSees platform, incorporating material degradation parameters corresponding to varying F–T cycles. Incremental dynamic analysis (IDA) was performed to derive seismic demand curves and quantify fragility corresponding to multiple damage states. The results indicate that the failure probability of the piers increases significantly with the number of F–T cycles, particularly for slight and moderate damage levels. In the low to moderate peak ground acceleration (PGA) range, the exceedance probabilities for slight and moderate damage states show a sharp rise, highlighting the sensitivity of early-stage damage to F–T degradation. It is worth noting that under the extreme condition of PGA = 1.0 g and 100 freeze–thaw cycles, the piers still exhibit a certain degree of redundancy against severe and complete damage, which to some extent reflects the certain rationality of the current seismic design in freeze–thaw environments. These findings underscore the robustness of current seismic design provisions in cold regions and provide theoretical and data-driven support for performance assessment, service life prediction, and maintenance planning of bridges exposed to freeze–thaw environments. Full article

The influence of freeze–thaw (FT) cycling and fucoidan incorporation on the structural and digestive characteristics of lotus seed starch (LS) gels was systematically examined. Fucoidan–lotus seed starch (F-LS) gels were exposed to 0, 1, 3, and 5 FT cycles. Repeated FT treatments were found to disrupt the gel matrix and decrease thermal stability, whereas the addition of 1–2% fucoidan effectively alleviated these degradations. Crystallinity was significantly reduced from 37.62% to 26.38% (p < 0.05), indicating suppressed retrogradation. Thermal gravimetric and low-field NMR analyses revealed reinforced matrix cohesion. In vitro digestion assays demonstrated that fucoidan significantly retarded starch hydrolysis and promoted resistant starch (RS) formation. After five FT cycles, the RS content of 2% F-LS gels reached 29.03%, a 30.24% increase compared to the control. These findings suggest that fucoidan could serve as a natural and effective cryoprotectant and digestibility modulator in starch-based functional foods, offering both technological and nutritional benefits. Full article

This study aims to evaluate the usability of agricultural wastes such as rice husk ash (RHA) and garlic husk ash (GHA) in improving silt soils by the alkali activation method. During the stabilization process, samples prepared with binder systems containing sodium hydroxide (SH) and sodium silicate (SS) at different SH/SS ratios (1, 3, and 9) and additive rates (0%, 4.5%, and 9%) were cured in two different curing environments (cured at ambient temperature—AC and cured in oven at 35 °C—OC) for 7, 28, 56, and 90 days. Mechanical behavior was evaluated by unconfined compressive strength (UCS) and unconsolidated-undrained triaxial compression (UU) tests; environmental strength was analyzed by 25 and 50 cycles of freeze–thaw (F–T) tests. Microstructure development was investigated by SEM and XRD analyses, while sustainability assessment was carried out with carbon footprint (kg·CO₂/kg) and carbon efficiency (CI) parameters. The findings showed that mixtures containing 9% RHA and a high SH/SS ratio provided high strength in both AC and OC environments. While using GHA alone provided limited mechanical performance, it increased the binding capacity by creating a synergistic effect when used with RHA. Oven-curing environment increased the speed of pozzolanic reactions and the development of the binder phase, resulting in denser microstructures. In addition, the RHA additive played a critical role in maintaining the resistance against freeze–thaw cycles. Carbon emission analyses revealed that SH and SS had high carbon loads, while RHA and GHA additives provided environmentally sustainable solutions with low carbon footprint and high strength. As a result, alkaline activation systems with RHA and GHA additives offer a strong alternative for sustainable soil improvement applications with high strength and environmental durability. Full article