Search Results (389)

Three novel hypoxanthine derivatives (1–3) were obtained from the Okinawan cyanobacterium Okeania hirsuta. The structures of these compounds were elucidated mainly based on the spectroscopic data, including 1D and 2D NMR, as well as high-resolution mass spectrometry. In particular, the amounts of obtained compounds 2 and 3 were only 200 μg and much less than 50 μg, respectively. Therefore, some carbons signals could not be observed on ¹³C NMR spectra of these compounds. However, the detailed analysis of HSQC and HMBC spectra allowed us to elucidate their structures. For NMR measurements of compound 3, it was found that using an 800 MHz NMR machine equipped with a cryogenic probe and acetic acid-d₄ as a solvent is essential. Compounds (1–3) were N-3′-carbonylbutyl group-connected hypoxanthines. Full article

In this report, we describe the synthesis of a compound derived from the natural compound celastrol, which is connected to a phthalimide moiety via an ester linkage. The compound was fully characterized by proton (¹H), carbon-13 (¹³C), heteronuclear single-quantum coherence (HSQC), and distortionless enhancement by polarization transfer (DEPT) NMR. Ultraviolet–visible spectroscopy (UV-Vis), Fourier-transform infrared (FTIR), and elementary analysis were also performed. Full article

In this study, we integrated HSQC-based DeepSAT with UPLC-MS/MS to guide the isolation of omega-3 polyunsaturated fatty acid derivatives (PUFAs) from marine resources. Through this approach, four new (1–4) and nine known (5–13) PUFA analogues were obtained from large-scale cultures of the marine dinoflagellate Prorocentrum lima, with lipidomic profiling identifying FA18:5 (5), FA18:4 (7), FA22:6 (8), and FA22:6 methyl ester (11) as major constituents of the algal oil extract. Structural elucidation was achieved through integrated spectroscopic analyses of IR, 1D and 2D NMR, and HR-ESI-MS data. Given the pivotal role of microglia in Alzheimer’s disease (AD) pathogenesis, we further evaluated the neuroprotective potential of these PUFAs by assessing their regulatory effects on critical microglial functions in human microglia clone 3 (HMC3) cells, including chemotactic migration and amyloid-β42 (Aβ42) phagocytic clearance. Pharmacological evaluation demonstrated that FA20:5 butanediol ester (1), FA18:5 (5), FA18:4 (7), FA22:6 (8), and (Z)-10-nonadecenoic acid (13) significantly enhanced HMC3 migration in a wound-healing assay. Notably, FA18:4 (7) also significantly promoted Aβ42 phagocytosis by HMC3 microglia while maintaining cellular viability and avoiding pro-inflammatory activation at 20 μM. Collectively, our study suggests that FA18:4 (7) modulates microglial function in vitro, indicating its potential to exert neuroprotective effects. Full article

The semi-synthesis of the (5R,7R,11bR)-9-(di(1H-indol-3-yl)methyl)-4,4,7,11b-tetramethyl-1,2,3,4,4a,5,6,6a,7,11,11a,11b-dodecahydrophenanthro[3,2-b]furan-5-yl acetate was performed via a pseudo-multicomponent reaction involving a double Friedel–Crafts alkylation between the natural product-derived aldehyde 6β-acetoxyvouacapane and the corresponding indole. The transformation was carried out under solvent-free mechanochemical conditions using mortar and pestle grinding, with ZnCl₂ as the catalyst. Structural elucidation of the target compound was accomplished using 1D and 2D NMR spectroscopy (¹H, ¹³C, COSY, HSQC, and HMBC), FT-IR, and high-resolution mass spectrometry (HRMS). Full article

Marine tunicates are a very attractive and abundant source of secondary metabolites with chemical diversity and biological activity. Fractionation and purification of the organic extract of the Red Sea tunicate Didemnum species resulted in the isolation and identification of three new compounds, didemnosides A and B (1 and 2) and 1,1′,3,3′-bisuracil (3), together with thymidine (4), 2′-deoxyuridine (5), homarine (6), and acetamide (7). Planar structures of the compounds were explained through analyses of their 1D (¹H and ¹³C) and 2D (¹H–¹H COSY, HSQC, and HMBC) NMR spectra and high-resolution mass spectral determinations. Compound 1 exhibited the highest growth inhibition toward the MCF-7 cancer cell line with IC₅₀ values of 0.597 μM, while other compounds were inactive (≥50 μM) against this cell line. On the other hand, compounds 1, 2, and 4–7 moderately inhibited SW-1222 and PC-3 cells with IC₅₀ values ranging between 5.25 and 9.36 μM. Molecular docking analyses of the top three active compounds on each tested cell line exposed stable interactions into the active pockets of estrogen receptor alpha (ESR1), human topoisomerase II alpha (TOP2A), and cyclin-dependent kinase 5 (CDK5) which are contemplated as essential targets in cancer treatments. Thus, compound 1 represents a scaffold for the development of more effective anticancer drugs. Full article

In the present study, we describe the synthesis of N-(2-((2-(1H-indol-3-yl)ethyl)carbamoyl)phenyl)furan-2-carboxamide via a two-step reaction sequence. Initially, isatoic anhydride was reacted with tryptamine to afford the corresponding intermediate, which was subsequently subjected to acylation using furan-2-carbonyl chloride. The final product was comprehensively characterized by melting point analysis, ¹H and ¹³C NMR, HSQC, IR, and MS spectrometry. The combined spectroscopic and analytical data unequivocally confirm the successful synthesis and structural integrity of the target compound. Full article

Lignin, one of the most abundant biopolymers on Earth, holds significant promise as a feedstock for applications such as resins, biofuels, foams, and carbon fibres. However, despite extensive research, lignin remains largely underutilised, with its primary use limited to combustion for energy. While lignin’s structural features are well documented, there is a lack of consistent data on its key physical properties such as density. This study addresses that gap by providing experimentally determined values for skeletal and bulk densities of lignins obtained through different extraction methods, including Kraft; soda pulping; and particularly the ionoSolv process, using ionic liquids such as N,N-dimethyl butyl ammonium hydrogen sulphate ([DMBA][HSO₄]). The results reveal correlations between lignin chemical structure and density in ionoSolv-extracted lignins from Eucalyptus Red Grandis, suggesting opportunities to tune the extraction parameters for targeted material properties. The skeletal density of the lignin samples ranged from 1.3370 to 1.4598 g/cm³, while the bulk density varied more widely—from 0.0944 to 0.5302 g/cm³—reflecting significant differences in particle packing and porosity depending on the biomass source and extraction method. These findings contribute valuable data for process design and scale-up, advancing the commercial viability of lignin-based products. Full article

As one kind of renewable aromatic polymer, lignin is severely underused due to its chemical recalcitrance. Lignin can endure demethylation modification to improve its activation by releasing more active functional groups. However, the process suffers from expensive, corrosive, and toxic issues by employing halogen-containing reagents, which has become an obstacle to industrial applications. Herein, a series of dicarboxylic acid-based protic ionic liquids (DAPILs) systems composed of ethanolamine and dibasic organic acids (e.g., aspartic acid (Asp), glutamic acid (Glu), succinic acid (SA), and glutaric acid (GA)) with 1~2:1 stoichiometric ratio, have been finely designed for the demethylation of industrial lignin. With [EOA][GA] treatment, the polyphenol content in lignin was favorably increased beyond 1.58 times. The structural tailoring and variation were fully characterized by 2D HSQC and ¹H NMR. The analysis results indicated that, with the increase of phenolic hydroxyl content in lignin, the β-O-4′ bond was broken and the content of structural units (S, G) and the S/G ratio of lignin decreased accordingly. After the treatment, the used IL and tailored lignin can be recovered over 95%. This novel, halogen-free and environmentally friendly lignin-cutting strategy not only opens avenues for high-value utilization of lignin but also expands the field of application of dicarboxylic acid-based protic ionic liquids. Full article

This study focuses on the extraction, characterization, and biological evaluation of diterpenes from green coffee beans, specifically, cafestol and kahweol. These compounds, known for their potential health benefits, were isolated via optimized extraction and saponification processes. Separation was achieved using silver nitrate-impregnated silica gel, and structural elucidation was performed through advanced 1D and 2D NMR techniques, including HSQC, HMBC, and (IN)ADEQUATE. Due to kahweol’s instability, the research prioritized cafestol for the synthesis of rhodamine B conjugates. Initial ester-linked conjugates proved unstable, prompting the development of more robust derivatives through amide linkage strategies and further functionalization via acetylation and oxidation reactions. Some oxidation methods led to furan ring cleavage, impacting structural integrity. Selected compounds were tested for cytotoxicity using SRB assays on human tumor cell lines (MCF7, A2780) and non-malignant fibroblasts (NIH 3T3). While the parent diterpenes and many derivatives showed minimal activity, several cafestol–rhodamine B conjugates demonstrated notable cytotoxic effects. Compound 6, in particular, exhibited selective activity against cancer cells with reduced toxicity toward non-malignant cells. Full article

A number of 1D and 2D NMR techniques, such as ¹H, ¹³C, DEPT 135, ¹H-¹H COSY, HSQC, and HMBC, were utilized for the structure verification of 4-(8-propyl-2,4-dithioxo-1,3-diazaspiro[4.5]decan-3-yl)spiro[1,5-dihydro-1,5-benzodiazepine-2,3′-indoline]-2′-one). The NMR spectra provided evidence for the tautomeric conversion of the compound. The completely assigned NMR data was supported additionally by ATR. Full article

Lawsonia inermis L. is renowned for its hair dyeing properties, with henna quality and safety often regulated by restrictions on the lawsone (2-hydroxy-1,4-naphthoquinone) content. In henna leaves, lawsone exists as glycosylated precursors, hennosides A, B, and C. Aqueous maceration revealed the sensitivity of enzymatic lawsone release, while ethanol extraction inhibited β-glucosidase activity, enabling controlled hennoside extraction. Hennoside A was isolated via RP-column chromatography and characterized using ESI-TOF, ¹H-/¹³C-NMR, COSY, NOESY, HSQC, and HMBC. The purified compound proved suitable as an HPLC reference standard. The acidic hydrolysis of hennoside-rich extracts highlighted the limitations of lawsone-based analysis, underscoring glycosylated precursors as more reliable quality markers. Lawsone quantification via enzymatic or acid catalysis demonstrated varying accuracy in quality control. A hennoside-based approach ensures consistency by estimating the maximum releasable lawsone without inducing its formation, providing a more robust metric for a henna quality assessment. Full article

Catalytic hydrogenolysis of lignin to produce high-value monophenols has emerged as a pivotal strategy in modern biorefineries. In this study, we synthesized spherical nitrogen-doped porous carbon (SNCB) materials by using Al/Co-BTC as a precursor, introducing melamine as a supplementary carbon and nitrogen source, and activating the material with NaOH solution. The SNCB framework was decorated with Cu-Pd bimetallic nanoparticles, exhibiting outstanding catalytic activity in the hydrogenolytic depolymerization of organosolv lignin. The Cu-Pd@SNCB catalyst exhibited remarkable activity, attributed to the hierarchical porous structure of SNCB that facilitated metal nanoparticle dispersion and reactant accessibility. The synergistic effect between Cu as the reactive site for reactant adsorption and Pd as the reactive site for H₂ adsorption enhanced the catalytic activity of the catalyst. Systematically optimized conditions (2 MPa H₂, 270 °C, 3 h) yielded 43.02 wt% phenolic monomers, with 4-(3-hydroxypropyl)-2,6-dimethoxyphenol dominating the product profile at 46.3% selectivity. The catalyst and its reaction products were analyzed using advanced characterization techniques, including XPS, XRD, TEM, SEM, BET, GC-MS, GPC, 2D HSQC NMR, and FT-IR, to elucidate the reaction mechanism. The mechanism proceeds through: (1) nucleophilic substitution of the β-O-4 hydroxyl group by MeOH, followed by (2) simultaneous hydrogenolytic cleavage of C_β-O and C_α-O bonds mediated by Cu-Pd@SNCB under H₂ atmosphere, which selectively produces 4-(3-hydroxypropyl)-2,6-dimethoxyphenol and 4-propyl-2,6-dimethoxyphenol. This study proposes a bimetallic synergistic mechanism, offering a general blueprint for developing selective lignin valorization catalysts. Full article

Amyloid beta (Aβ42 and Aβ40) aggregation, along with neurofibrillary tangles, is one of the major neurotoxic events responsible for the onset of Alzheimer’s disease. Many potent peptide-based inhibitors mainly focusing on central hydrophobic core Aβ16–20 (KLVFF) have been reported in recent years. Herein, we report pentapeptides 1–4, based on the β-turn-inducing fragment Aβ19–23 (FFAED). The synthesis of peptides 1–4 was carried out using Fmoc/tBu-based solid-phase peptide synthesis technique, and it was found that pentapeptide 3 potently inhibit the aggregation propensity of Aβ42, when incubated with it at 37 °C for 48 h. The aggregation inhibition study was conducted using thioflavin T-based fluorescence assay and circular dichroism spectroscopy, and supported by transmission electron microscope imaging. The conformational change on the aggregation of Aβ42 and aggregation inhibition by peptides 1–4 was further evaluated using ¹H–¹⁵N HSQC NMR spectroscopy. The results demonstrated that the most potent analog, peptide 3, effectively disrupts the aggregation process. This study is the first to demonstrate that an Aβ19–23 fragment mimic can disrupt the aggregation propensity of Aβ42. Full article

Methoxycamalexins are close structural derivatives of the indolic phytoalexin Camalexin, which is a well-known drug lead with an antiproliferative and antioxidant profile. 6-methoxycamalexin, 7-methoxycamalexin, and 6,7-dimethoxycamalexin are natural bioactive products, and there is significant interest in the development of efficient methods for the synthesis of structurally related analogues. Herein, we describe an efficient and high-yielding method for the synthesis of variously substituted hydroxy-, bezyloxy, and methoxycamalexins. A set of methoxy-, hydroxy-, and benzyloxy-indoles were successfully amidoalkylated with N-acyliminium reagents derived in situ from the reaction of thiazole or methylthiazoles with Troc chloride. Eleven novel N-acylated analogues were synthesized, with yields ranging from 77% to 98%. Subsequent oxidative reactions with o-chloranil or DDQ led to 10 novel oxy-camalexins in 62–98% yield. This two-step approach allowed the synthesis of two 4,6-dimethoxy camalexins, which are difficult to obtain using published methods. The structure of the obtained products was unequivocally determined by ¹H-, ¹³C{¹H}-, HSQC-NMR, FTIR, and HRMS spectral analyses. An in silico assay was carried out on the obtained products to assess their general toxicity and physicochemical properties, including their compliance with Lipinski’s rule of five. The results indicate that all compounds have good potential to be developed as drugs or agrochemicals. Full article

This report discusses the synthesis of a biosourced divanillin derivative obtained by Knoevenagel condensation. The compound was fully characterized by proton (¹H), carbon (¹³C), heteronuclear single quantum coherence (HSQC), homonuclear correlation spectroscopy (COSY), and heteronuclear multiple bond correlation (HMBC) NMR, as well as high-resolution mass spectroscopy (HRMS). We also investigated the optical properties through UV-visible spectroscopy and Fourier-transform infrared (FTIR) spectroscopy. At last, the thermal properties of this divanillin derivative were evaluated by thermogravimetric analysis (TGA) as well as differential scanning calorimetry (DSC). Full article