Search Results (2,117)

The Duobaoshan mineralization area in Heilongjiang Province is a key copper–molybdenum–gold polymetallic region in China. Its southeastern Fudiyingzi–Bacheli area, located at the intersection of the NW-trending copper and NE-trending gold belts, exhibits favorable mineralization conditions. Despite over 70 years of placer gold mining and the discovery of one small copper deposit and one gold deposit, the area remains underexplored with significant peripheral exploration potential. This study integrates 1:50,000 geological mapping, high-precision magnetic surveys, phase-induced polarization, and soil geochemistry through multi-source data fusion for comprehensive mineral prediction. Key steps include delineating Cu, Au, and Mo anomalies and analyzing their associations with Zn, Cd, Ag, As, etc.; inferring NE-, NW-, and near-EW-trending linear structures via magnetic boundary enhancement; dividing high/low resistivity zones and identifying nine significant and six weak phase anomalies using phase-induced polarization; establishing a mineralization model based on typical deposits; and delineating four priority exploration targets. These results provide a scientific basis for further exploration in shallow coverage areas. Full article

Extensive research has been conducted on the catalytic properties of molybdenum disulfide (MoS₂) materials in the context of the hydrogen evolution reaction (HER). This study focuses on exploring hybrid MoS₂/Au structures as a catalyst for HER, utilizing linear sweep voltammetry as the experimental methodology. Firstly, 2D-MoS₂ flakes were synthesized by the chemical vapor deposition (CVD) approach and directly added to gold nanoparticles during or after their preparation process. The prepared nanocomposites were characterized by Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), Raman spectroscopy, and scanning electron microscopy with energy-dispersive X-ray analysis (SEM/EDX). The HER performance was tested for the two resulting samples to show that the preparation of gold nanoparticles with the coexistence of CVD-MoS₂ flakes produces a superior electrocatalytic performance of the sample in a neutral medium. Notably, the onset potential was measured as −0.152 V (versus reversible hydrogen electrode (RHE)) with an exchange current density (j₀) of 0.22 mA/cm². Chronoamperometric data show that all composites retained initial current densities for 15 hours, confirming stable, efficient HER performance post-decay. Full article

In this study, Bi₂MoO₆ nanoflowers with different molybdenum sources were in situ grown on the surface of g-C₃N₄ nanosheets (OCN) by a simple one-step solvothermal method. The effects of doping and different molybdenum sources on the photocatalytic degradation and bactericidal activity of Bi₂MoO₆/OCN were discussed. Among them, the solvothermal preparation of P-Bi₂MoO₆/OCN using phosphomolybdic acid as molybdenum source can make up for the shortcomings caused by the destruction of OCN structure by generating more lattice defects to promote charge separation and constructing Lewis acid/base sites to effectively improve the photocatalytic performance. In addition, by adding phosphoric acid to increase the P-doped content, more exposed alkaline active sites are induced on the surface of P-Bi₂MoO₆/OCN, as well as larger specific surface area and charge transfer efficiency, which further improve the photocatalytic performance. Finally, the optimized 16P-Bi₂MoO₆/OCN showed a degradation rate of 99.7% for 20 mg/L rhodamine B (RhB) within 80 min under visible light, and the antibacterial rates against E. coli, S. aureus and P. aeruginosa within 300 min were 99.58%, 98.20% and 97.48%, respectively. This study provides a reference for optimizing the synthesis of environmentally friendly, solar-responsive, photocatalytic sterilization materials from the perspective of preparation, raw materials and structure. Full article

Molybdenum disulfide (MoS₂) has gained attention for its promising gas-sensing capabilities due to its high surface area and tunable electronic properties. In this study, we investigate the time-dependent growth (under constant conditions) of sputtered MoS₂ films on ZnO nanorods and their impact on NO₂ sensing performance. ZnO nanorods, synthesized via a hydrothermal method, provide a high-surface-area template to enhance charge transport and gas adsorption. Gas-sensing experiments revealed a strong correlation between MoS₂ thickness and NO₂ response, with the 25-min-sputtered MoS₂ film exhibiting the highest response of 20.9%. The synergistic interaction between MoS₂ and ZnO nanorods facilitated charge transfer and enhanced adsorption sites for NO₂ molecules. These findings emphasize the critical role of time-dependent growth of MoS₂ film in modulating gas-sensing performance and provide insights into designing high-sensitivity NO₂ sensors at room temperature. This study contributes to the development of hybrid MoS₂/ZnO nanostructures for next-generation environmental monitoring applications. Full article

A nanoflower-like nickel-molybdenum alloy was synthesized by hydrothermal in situ growth of NiMoO₄ nanorod arrays on nickel foam (NF) followed by gas-phase re-reduction at 600 °C. The resulting structure has a uniform porosity and high specific surface area, which improves the availability of active sites and facilitates efficient electron and mass transport. SEM and XPS analyses confirm that the formed NiMoO₄ nanorods are uniformly distributed, which leads to significant optimization of their electronic structure. The electrochemical measurements revealed that the sample exhibited excellent hydrogen evolution reaction (HER) performance, with an overpotential as low as 127 mV at 100 mA cm⁻² and a Tafel slope of 124 mV dec⁻¹. CV and EIS showed that the sample had the largest electrochemically active surface area (121.3 mF cm⁻²) among the samples treated at different temperatures, with the smallest charge transfer resistance. In addition, the catalyst maintained high stability after 45 h of continuous operation. These results highlight the potential of NiMo/NF as a highly efficient and durable HER catalyst to help advance hydrogen energy technology. Full article

Lithium- and sodium-ion batteries (LIBs and SIBs) suffer from the significant degradation of electrochemical performance at low temperatures. This work presents promising hybrid anodes synthesized by the rapid thermolysis of ammonium tetrathiomolybdate and graphene oxide (GO) at 600 and 700 °C. Transmission electron microscopy revealed the formation of MoS₂ crystallites oriented along or perpendicular to the surface of reduced GO (rGO) layers. X-ray photoelectron spectroscopy found the covalent C–S bonds connecting components in the MoS₂/rGO hybrids. The MoS₂/rGO_600 hybrid showed higher specific capacities in LIBs of 1370 mAh/g, 835 mAh/g, and 711 mAh/g at a current density of 0.1 A/g and temperatures of 25 °C, 0 °C, and −20 °C, respectively, due to the presence of excess sulfur in the sample. Increasing the current density to 2 A/g retained 78 and 34% of the capacity at 25 °C and −20 °C. In SIBs, the MoS₂/rGO_700 hybrid showed more promising results, achieving 550 mAh/g at 0.1 A/g and 400 mAh/g at 2 A/g, while lowering the temperature to −20 °C retained 48 and 17% of the capacity. Such good SIB performance is attributed to the enrichment of the sample with vertically oriented MoS₂ layers covalently bonded to the rGO surface. Full article

The short-term mechanical properties of commercial corrosion-resistant nickel alloys based on Ni-Cr (Hastelloy^® G-35^® or UNS N06035), Ni-Mo (Hastelloy^® B-3^® or UNS N10675), and Ni-Cr-Mo (VDM^® Alloy C-4 or UNS N06455, VDM^® Alloy 59 or UNS N06059, and KhN62M-VI) systems were analyzed in the as-received state and after long-term (up to 5000 h) aging at 500–700 °C. All alloys exhibited moderate strength and high ductility in the as-received state. Under the influence of high temperatures, these alloys showed a tendency toward the decomposition of Ni-based FCC solid solutions and a change in mechanical properties. It was shown that the difference in chromium and molybdenum content in Ni-Cr-Mo alloys leads to the formation of secondary phases of various composition and morphology, which had varied influence on the short-term mechanical properties of the materials. Grain boundary precipitates had a negligible effect on the strength properties of the investigated alloys, while intragranular precipitates embrittled nickel-based alloys, reducing their possible application at high temperatures. Full article

The low availability of phosphorus (P) in soil has become a critical factor limiting crop growth and agricultural productivity. This study aimed to isolate and evaluate a bacterial strain with high phosphate-solubilizing capacity to improve soil phosphorus utilization and promote crop growth. A phosphate-solubilizing bacterium, designated as YS-13, was isolated from farmland soil in Henan Province, China, and identified as Brevibacillus laterosporus based on morphological characteristics, physiological and biochemical traits, and 16S rDNA sequence analysis. Qualitative assessment using plate assays showed that strain YS-13 formed a prominent phosphate solubilization zone on organic and inorganic phosphorus media containing lecithin and calcium phosphate, with D/d ratios of 2.28 and 1.57, respectively. Quantitative evaluation using the molybdenum–antimony colorimetric method revealed soluble phosphorus concentrations of 21.24, 6.67, 11.73, and 17.05 mg·L⁻¹ when lecithin, ferric phosphate, calcium phosphate, and calcium phytate were used as phosphorus sources, respectively. The fermentation conditions for YS-13 were optimized through single-factor experiments combined with response surface methodology, using viable cell count as the response variable. The optimal conditions were determined as 34 °C, 8% inoculum volume, initial pH of 7.55, 48 h incubation, 5 g L⁻¹ NaCl, 8.96 g L⁻¹ glucose, and 8.86 g L⁻¹ peptone, under which the viable cell count reached 6.29 × 10⁸ CFU mL⁻¹, consistent with the predicted value (98.33%, p < 0.05). The plant growth-promoting effect of YS-13 was further validated through a pot experiment using Triticum aestivum cv. Jinchun 6. Growth parameters, including plant height, fresh biomass, root length, root surface area, root volume, and phosphorus content in roots and stems, were measured. The results demonstrated that YS-13 significantly enhanced wheat growth, with a positive correlation between bacterial concentration and growth indicators, although the growth-promoting effect plateaued at higher concentrations. This study successfully identified a high-efficiency phosphate-solubilizing strain, YS-13, and established optimal culture conditions and bioassay validation, laying a foundation for its potential application as a microbial inoculant and providing theoretical and technical support for reducing phosphorus fertilizer inputs and advancing sustainable agriculture. Full article

W-Mo-Cu composites show promise for advanced applications, but their properties require optimization. In this study, a novel approach utilizing Cu-coated graphene (Cu@Gr) reinforcement with skeleton relative density adjustment was employed to tailor the microstructure and properties of W-Mo-Cu composites fabricated via infiltration sintering (1300 °C, 1.5 h). The results revealed that Cu@Gr significantly promoted sintering densification, modified the phase composition, and enhanced the properties of the composite. Specifically, the addition of 0.4 wt.% Cu@Gr resulted in a relative density of 98% for the composite, representing an 8% increase compared to the material without Cu@Gr. Furthermore, when higher amounts of Cu@Gr were incorporated, the composite consistently exhibited a high degree of densification. In addition to the primary W, Mo, and Cu phases, molybdenum carbide, Mo₂C, was formed at 0.4 wt.% Cu@Gr, with its content rising proportionally to graphene dosage. Notably, the composite containing 0.6 wt.% Cu@Gr exhibits the highest thermal conductivity and electrical conductivity, showing 64% and 73% increases, respectively, versus Cu@Gr-free samples. Additionally, although W-Mo green compact density variations (73–85%) did not compromise graphene-induced densification, a higher green compact density reduced the thermal/electrical conductivities but increased the hardness. These findings demonstrate that controlled Cu@Gr incorporation and green compact optimization synergistically improve the properties of W-Mo-Cu composites, providing insights into high-performance material design. Full article

Orthopedic implants are essential for treating severe fractures and incomplete bone regeneration. However, metal-based implants often suffer from corrosion and biocompatibility issues. This study developed 3D-printed Polylactic Acid Plus (PLA+) bone screws coated with molybdenum and zirconia (ZrO₂) nanocomposites using the dip-coating method. The Taguchi method optimized five coating parameters: molybdenum weight, zirconia weight, ethanol volume, incubation time, and coating duration. The Taguchi method and Response Surface Methodology (RSM) were used for data analysis, while NSGA-II and TOPSIS determined the optimal parameters. Molybdenum weight significantly increased compressive strength (35.45%), while coating time had the greatest effect on density (25.88%). Optimization improved compressive strength/Ec (Modulus of elasticity) to 315.808 MPa and density to 1.141 g/cm³. Compressive strength was significantly improved through optimized coating parameters; however, the achieved value of 315.808 MPa requires validation due to its relatively high magnitude compared to typical PLA materials reported in the literature. The study concludes that combining the Taguchi and NSGA-II methods effectively enhances the mechanical performance and biocompatibility of biodegradable bone screws. The optimal dip-coating parameters were 0.101 g molybdenum, 0.100 g zirconia, 59.523 mL ethanol, 6.025 h of incubation, and 7.907 min of coating time. However, the study is limited to in vitro mechanical testing, and further in vivo evaluations are necessary to confirm long-term biocompatibility and performance. Full article

Molybdenum nitrides are known to have a series of excellent physical properties owing to their unique bonding nature and electronic structure. However, the synthesized samples often exist in nonstoichiometric phases with structural defects (metal or non-metal vacancies), which may influence their performance. Based on the density functional theory, we theoretically studied the vacancy formation in δ-MoN. Various configurations that contained one single vacancy, divacancies, or trivacancies were constructed and systematically studied. It was found that Mo vacancy leads to significant electron loss at the vacant site while N vacancy results in excess electrons being trapped, forming a uniform electron gas region. Detailed analysis revealed that four types of binding clusters are encouraged to form in δ-MoN. The V_Mo–V_N or V_N–V_Mo–V_N (with a sandwich structure) binding is owing to the positive and negative interaction between Mo and N vacancies. The V_N–V_N or V_N–V_N–V_N binding is attributed to the overlap of electron density, but requires N vacancies to be distributed in a specific arrangement. Both Mo and N vacancies induce the anisotropic degradation of electronic conductivity in δ-MoN, with the extent of degradation governed by the vacancy type and concentration. Full article

Shaping or splitting of a Gaussian beam is often desired to optimise laser–material interactions, improving throughput and quality. This can be achieved holographically using liquid crystal-on-silicon spatial light modulators (LC-SLMs). Until recently, maximum exposure has been limited to circa 120 W average power with a Gaussian profile, restricting potential applications due to the non-linear (NL) phase response of the liquid crystal above this threshold. In this study, we present experimental tests of a new SLM device, demonstrating high first-order diffraction efficiency of η = 0.98 ± 0.01 at 300 W average power and a phase range Δφ > 2π at P = 383 W, an exceptional performance. The numerically calculated device temperature response with power closely matches that measured, supporting the higher power-handling capability. Surface modification of mild steel and molybdenum up to P = 350 W exposure is demonstrated when employing a single-mode (SM) fibre laser source. Exposure on mild steel with a vortex beam (m = +6) displays numerous ringed regions with varying micro-structures and clear elemental separation created by the radial heat flow. On molybdenum, with multi-spot Gaussian exposure, both MoO₃ films and recrystallisation rings were observed, exposure-dependent. The step change in device capability will accelerate new applications for this LC-SLM in both subtractive and additive manufacturing. Full article

The integration of Silicon Carbide (SiC) nanoparticles into Laser Powder Bed Fusion (LB-PBF) Molybdenum (Mo) printing represents a significant advancement in refractory metal additive manufacturing. Our investigation examined how varying SiC nanoparticle sizes affect the microstructural and electrical properties of LB-PBF-printed molybdenum components while maintaining a 0.01 mass fraction of Mo. At an Linear Energy Densities (LED) of 1.8 J/mm, the addition of 80 nm SiC particles achieved a 46% reduction in porosity, while sheet resistance decreased by 6% at LED of 2.0 J/mm with 80 nm SiC particles. These performance improvements stem from several mechanisms: SiC particles serve as oxygen scavengers, facilitate secondary phase formation, and enhance laser absorption efficiency. Their dual role as sacrificial oxidizing agents and Mo disilicide phase promoters represents a novel approach to addressing microcracking and porosity in LB-PBF-printed Mo components. Through systematic investigation of particle size effects on both microscale and nanoscale properties, our findings suggest that optimized nanoparticle addition could become a universal strategy for enhancing LB-PBF processing of refractory metals, particularly in applications requiring enhanced mechanical and electrical performance. Full article

Molybdenum (Mo) is a vital micronutrient for nearly all living organisms, serving as a cofactor for molybdoenzymes that catalyze essential redox reactions in nitrogen metabolism. Among these enzymes, nitrate reductase plays a crucial role in nitrate assimilation. Maintaining Mo homeostasis—including uptake, storage, and utilization—is critical to avoid both deficiency and toxicity. Our research focuses on uncovering novel molecular components involved in Mo homeostasis, particularly in connection with nitrate assimilation, using Chlamydomonas reinhardtii, a model green microalga. To achieve this, we generated more than 5000 Chlamydomonas transformants through insertional mutagenesis using a paromomycin resistance cassette (AphVIII) and screened them for altered growth on nitrate and under different Mo concentrations. We identified four strains showing altered growth patterns when using nitrate as a nitrogen source or exhibiting increased sensitivity or resistance to Mo. The genomic alterations in these strains were identified. Notably, both a Mo-resistant and a Mo-sensitive transformant had disruptions in the genes that encoded ABC-type transport proteins, indicating a potential role for these proteins in Mo transport. Additionally, two strains were unable to grow on nitrate. One of them had a mutation in the CNX7, a gene involved in Mo cofactor biosynthesis, while the other had a mutation in BAT1, an amino acid transporter. The BAT1 mutant represents an interesting case study, as this gene has not previously been associated with nitrate metabolism. These findings enhance our understanding of Mo and nitrate homeostasis mechanisms and open new paths for engineering microalgae with improved nitrogen assimilation. Full article

Refractory metal-based Mo-Si-B alloys have long been considered the most promising candidates for replacing nickel-based superalloys in the aerospace and energy sector due to their outstanding mechanical properties and good oxidation of the Mo-silicide phases. In general, the addition of vanadium to Mo-Si-B alloys leads to a significant density reduction, while small amounts of titanium provide additional strengthening without changing the phase evolution within the Mo_ss-Mo₃Si-Mo₅SiB₂ phase field. In this work, high-energy ball milling studies on Mo-40V-9Si-8B, substituting both molybdenum and vanadium with 2 and 5 at. % Ti in all constituents, were performed to evaluate the potential milling parameters and investigate the effects of Ti doping on the milling characteristics and phase formation of these multicomponent alloys. After different milling durations, the powders were analysed with regard to their microstructure, particle size, oxygen concentration and microhardness. After heat treatment, the silicide phases (Mo,V)₃Si and (Mo,V)₅SiB₂ precipitated homogeneously within a (Mo,V) solid solution matrix phase. Thermodynamic phase calculations using the CALPHAD method showed good agreement with the experimental phase compositions after annealing, confirming the stability of the observed microstructure. Full article