Search Results (64)

This investigation addresses the enhancement of ammonia fuel cell performance using Pd (palladium)- and Co (cobalt)-doped cathode catalysts. Initially, the performance of the Ag/C cathode catalyst in ammonia fuel cells yielded a baseline power density of only 38 mW/cm². To improve efficiency, Pd and Co were introduced, resulting in the synthesis of a new 15 wt% PdAgCo/C (15 wt% PdAgCo and 85 wt% C) cathode catalyst, which increased the power density to 74 mW/cm². Further performance enhancement was achieved by using a highly efficient 40 wt% PtIr/C anode catalyst, as reported in the literature, and applying a cathode catalyst loading of 0.5 mg/cm², raising the power density to 172 mW/cm². This investigation addresses the successful synthesis of a 15 wt% PdAgCo/C cathode catalyst, which has proven to be a better choice over conventional catalysts, along with the significance of doping Pd and Co with Ag/C in the augmentation of catalytic activity and fuel cell performance. Thus, a series of physicochemical and electrochemical characterizations, the approach for optimization of the working parameters, and the impact analysis of catalyst loading have all resulted in the achievement of an impeccable power density of 332 mW/cm². Full article

The transition to a sustainable chemical industry necessitates efficient valorization of biomass, with polyols serving as versatile, renewable feedstocks. This comprehensive review, focusing on advancements within the last five years, critically analyzes the selective hydrogenolysis of key biomass-derived polyols—including glycerol, erythritol, xylitol, and sorbitol—into valuable diols. Emphasis is placed on the intricate catalytic strategies developed to control C–O bond cleavage, preventing undesired C–C scission and cyclization. The review highlights the design of bifunctional catalysts, often integrating noble metals (e.g., Pt, Ru, Ir) with oxophilic promoters (e.g., Re, W, Sn) on tailored supports (e.g., TiO₂, Nb₂O₅, N-doped carbon), which have led to significant improvements in selectivity towards specific diols such as 1,2-propanediol (1,2-PD), 1,3-propanediol (1,3-PD), and ethylene glycol (EG). While substantial progress in mechanistic understanding and catalyst performance has been achieved, challenges persist regarding catalyst stability under harsh hydrothermal conditions, the economic viability of noble metal systems, and the processing of complex polyol mixtures from lignocellulosic hydrolysates. Future directions for this field underscore the imperative for more robust, cost-effective catalysts, advanced computational tools, and intensified process designs to facilitate industrial-scale production of bio-based diols. Full article

Industrial catalysts are accelerating the global transition toward renewable energy, serving as enablers for innovative technologies that enhance efficiency, lower costs, and improve environmental sustainability. This review explores the pivotal roles of industrial catalysts in hydrogen production, biofuel generation, and biomass conversion, highlighting their transformative impact on renewable energy systems. Precious-metal-based electrocatalysts such as ruthenium (Ru), iridium (Ir), and platinum (Pt) demonstrate high efficiency but face challenges due to their cost and stability. Alternatives like nickel-cobalt oxide (NiCo₂O₄) and Ti₃C₂ MXene materials show promise in addressing these limitations, enabling cost-effective and scalable hydrogen production. Additionally, nickel-based catalysts supported on alumina optimize SMR, reducing coke formation and improving efficiency. In biofuel production, heterogeneous catalysts play a crucial role in converting biomass into valuable fuels. Co-based bimetallic catalysts enhance hydrodeoxygenation (HDO) processes, improving the yield of biofuels like dimethylfuran (DMF) and γ-valerolactone (GVL). Innovative materials such as biochar, red mud, and metal–organic frameworks (MOFs) facilitate sustainable waste-to-fuel conversion and biodiesel production, offering environmental and economic benefits. Power-to-X technologies, which convert renewable electricity into chemical energy carriers like hydrogen and synthetic fuels, rely on advanced catalysts to improve reaction rates, selectivity, and energy efficiency. Innovations in non-precious metal catalysts, nanostructured materials, and defect-engineered catalysts provide solutions for sustainable energy systems. These advancements promise to enhance efficiency, reduce environmental footprints, and ensure the viability of renewable energy technologies. Full article

One of the key challenges in commercializing proton exchange membrane (PEM) electrolyzer technology is reducing the production costs while maintaining high efficiency and operational stability. Significant contributors to the overall cost of the device are the electrode catalysts with IrO₂ and Pt/C. Due to the high cost and limited availability of noble metals, there is growing interest in developing alternative, low-cost catalytic materials. In recent years, two-dimensional transition metal dichalcogenides (2D TMDCs), such as molybdenum disulfide (MoS₂) and rhenium disulfide (ReS₂), have attracted considerable attention due to their promising electrochemical properties for hydrogen evolution reactions (HERs). These materials exhibit unique properties, such as a high surface area or catalytic activity localized at the edges of the layered structure, which can be further enhanced through defect engineering or phase modulation. To increase the catalytically active surface area, the investigated materials were deposited on a carbon-based support—Vulcan XC-72R—selected for its high electrical conductivity and large specific surface area. This study investigated the physicochemical and electrochemical properties of six catalyst samples with varying MoS₂ and ReS₂ to carbon support ratios. Among the composites analyzed, the best sample on MoS₂ (containing the most carbon soot) and the best sample on ReS₂ (containing the least carbon soot) were selected. These were then used as cathode catalysts in an experimental PEM electrolyzer setup. The results confirmed satisfactory catalytic activity of the tested materials, indicating their potential as alternatives to conventional noble metal-based catalysts and providing a foundation for further research in this area. Full article

The rapid growth in population and industrialization have significantly increased global energy demand, placing immense pressure on finite and environmentally harmful conventional fossil fuel-based energy sources. In this context, the development of hybrid electrocatalysts presents a crucial solution for energy conversion and storage, addressing environmental challenges while meeting rising energy needs. In this study, the fabrication of a novel bifunctional catalyst, copper nickel aluminum spinel (Cu_0.5Ni_0.5Al₂O₄) supported on graphitic carbon nitride (GCN), using a solid-state synthesis process is reported. Because of its effective interface design and spinel cubic structure, the Cu_0.5Ni_0.5Al₂O₄/GCN nanocomposite, as synthesized, performs exceptionally well in electrochemical energy conversion, such as the oxygen evolution reaction (OER), the hydrogen evolution reaction (HER), and energy storage. In particular, compared to noble metals, Pt/C- and IrO₂-based water-splitting cells require higher voltages (1.70 V), while for the Cu_0.5Ni_0.5Al₂O₄/GCN nanocomposite, a voltage of 1.49 V is sufficient to generate a current density of 10 mA cm⁻² in an alkaline solution. When used as supercapacitor electrode materials, Cu_0.5Ni_0.5Al₂O₄/GCN nanocomposites show a specific capacitance of 1290 F g⁻¹ at a current density of 1 A g⁻¹ and maintain a specific capacitance of 609 F g⁻¹ even at a higher current density of 5 A g⁻¹, suggesting exceptional rate performance and charge storage capacity. The electrode’s exceptional capacitive properties were further confirmed through the determination of the roughness factor (Rf), which represents surface heterogeneity and active area enhancement, with a value of 345.5. These distinctive characteristics render the Cu_0.5Ni_0.5Al₂O₄/GCN composite a compelling alternative to fossil fuels in the ongoing quest for a viable replacement. Undoubtedly, the creation of the Cu_0.5Ni_0.5Al₂O₄/GCN composite represents a significant breakthrough in addressing the energy crisis and environmental concerns. Owing to its unique composition and electrocatalytic characteristics, it is considered a feasible choice in the pursuit of ecologically sustainable alternatives to fossil fuels. Full article

Magnetic materials with intriguing structural and functional modifications demonstrate broad application potential in various fields, including drug delivery, absorption, extraction, separation, and catalysis. In particular, the catalytic hydrogenation of functionalized organic nitro compounds represents a significant research focus in contemporary catalysis studies. A facile synthesis of Fe₃O₄@C–Pt core-shell nanocatalysts was developed in this work through a sequential process involving (1) one-pot hydrothermal synthesis followed by N₂-annealing to obtain the Fe₃O₄@C core and (2) subsequent solvothermal deposition of platinum nanoparticles. Comprehensive characterization was performed using FT-IR, XRD, Raman spectroscopy, TEM, XPS, BET surface area analysis, TGA, and VSM techniques. The resulting magnetic nanocatalysts exhibited uniformly dispersed Pt nanoparticles and demonstrated exceptional catalytic performance in nitroarene hydrogenation reactions. Remarkably, the system showed excellent functional group tolerance across all 20 substituted nitroarenes, consistently yielding corresponding aromatic amine products with >93% conversion efficiency. Furthermore, the magnetic responsiveness of Fe₃O₄@C–Pt enabled convenient catalyst recovery through simple magnetic separation, with maintained catalytic activity over 10 consecutive reuse cycles without significant performance degradation. Full article

Designing efficient and cost-effective electrocatalysts is crucial for the large-scale development of sustainable hydrogen energy. Amorphous catalysts hold great promise for application due to their structural flexibility and high exposure of active sites. We report a novel method for the in situ growth of amorphous CoNiRuO_x nanoparticle structures (CoNiRuO_x/NF) on a nickel foam substrate. In 1 m KOH, CoNiRuO_x/NF achieves a current density of 10 mA/cm² with a hydrogen evolution reaction (HER) overpotential of only 43 mV and remains stable for over 100 h at a current density of 100 mA/cm². An alkaline electrolyzer assembled with CoNiRuO_x/NF as the cathode delivers a current density 2.97 times higher than that of an IrO₂||Pt/C electrode pair at the potential of 2 V and exhibits excellent long-term durability exceeding 100 h. Experimental results reveal that the combined replacement and corrosion reactions facilitate the formation of the amorphous CoNiRuO_x structure. This work provides valuable insights for developing efficient and scalable amorphous catalysts. Full article

Platinum (Pt)-based heterogeneous catalysts show excellent performance for the electrocatalytic hydrogen evolution reaction (HER); however, the high cost and earth paucity of Pt means that efforts are being directed to reducing Pt usage, whilst maximizing catalytic efficiency. In this work, a two-step laser annealing process was employed to synthesize Pt single-atom catalysts (SACs) on a MOF-derived carbon substrate. The laser irradiation of a metal–organic framework (MOF) film (ZIF67@ZIF8 composite) by rapid scanning of a ns pulsed infrared (IR; 1064 nm) laser across the freeze-dried MOF resulted in a metal-loaded graphitized film. This was followed by loading this film with chloroplatinic acid (H₂PtCl₆), followed by further irradiation with an ultraviolet (UV; 355 nm) laser, resulting in pyrolysis of H₂PtCl₆ to form the SAC, along with a further reduction of the MOF to form a Pt-decorated laser-induced annealed MOF (Pt-LIA-ZIF8@ZIF67). The Pt-LIA-ZIF8@ZIF67 catalyst with a Pt loading of 0.86 wt. % exhibited exceptionally high activity for the HER in acidic conditions. The atomically dispersed Pt on the carbon substrate exhibited a small overpotential of 68.8 mV at 10 mA cm⁻² for the hydrogen evolution reaction with a mass activity 20.52 times that of a commercial Pt/C catalyst at an overpotential of 50 mV vs. RHE. Finally, we note that the synthesis method is simple, fast, and versatile, and potentially scalable for the mass production of SACs for electrocatalytic applications. Full article

Transition-metal-catalyzed C(sp³)-H bond functionalization is a useful transformation for the construction of C–C bonds. A versatile and easy-to-perform protocol in this respect is the C-alkylation of methyl heteroarenes with alcohols using auto-transfer hydrogenative (ATH) reactions. Various transition metal catalysts based on Ir, Pt, Ru, Ni, Co, Fe and Mn have been employed for the construction of chain-elongated alkyl-substituted heterocyclic compounds using this chemistry. Water is the only byproduct and the starting alcohols are less toxic, readily available, more easily handled and more atom-economical substrates than their halogen counterparts. This review details recent advances in this synthetic methodology, describing the scope, reaction mechanism, chemo-selectivity and applications. Full article

The combination of electronic and catalytic features, in conjunction with empirical investigation, provides enriched perspectives on the analysis of catalysts, thus propelling progress and design. This study employs computational methods to deduce electronic characteristics, including properties such as bandgap, Fermi energy, and magnetic moment, for known catalysts involved in the oxidative coupling of methane (OCM) reaction. Through the comparison of these attributes with existing experimental OCM data, the ability to forecast the effectiveness of catalysis and subsequent reaction results is achieved, spanning CH₄, C₂H₄, C₂H₆, and CO₂ production. Transition metals, including Pt, Rh, Ru, and Ir, turn out to be promising catalyst promoters of OCM reactions. This study identified 58 innovative blends of metallic oxides and 3480 new catalytic configurations specifically designed for methane conversion at a moderately low temperature of 700 °C, placing them as effective catalysts for the OCM reaction. These emerging catalysts are projected to result in a rise in methane conversion extending from ±38.5% to ±95%, presenting a significant increase from the upper limit methane conversion of 36% reported in previous investigations. Full article

Developing an OER electrocatalyst that balances high performance with low cost is crucial for widely adopting PEM water electrolyzers. Ru-based catalysts are gaining attention for their cost-effectiveness and high activity, positioning them as promising alternatives to Ir-based catalysts. However, Ru-based catalysts can be prone to oxidation at high potentials, compromising their durability. In this study, we utilize a simple synthesis method to synthesize a SnO₂, Nb₂O₅, and RuO₂ composite catalyst (SnO₂/Nb₂O₅@RuO₂) with multiple interfaces and abundant oxygen vacancies. The large surface area and numerous active sites of the SnO₂/Nb₂O₅@RuO₂ catalyst lead to outstanding acidic oxygen evolution reaction (OER) performance, achieving current densities of 10, 50, and 200 mA cm⁻² at ultralow overpotentials of 287, 359, and 534 mV, respectively, significantly surpassing commercial IrO₂. Moreover, incorporating Nb₂O₅ into the SnO₂/Nb₂O₅@RuO₂ alters the electronic structure at the interfaces and generates a high density of oxygen vacancies, markedly enhancing durability. Consequently, the membrane electrode composed of SnO₂/Nb₂O₅@RuO₂ and commercial Pt/C demonstrated stable operation in the PEM cell for 25 days at an industrial current density of 1 A cm⁻². This research presents a convenient approach for developing a highly efficient and durable Ru-based electrocatalyst, underscoring its potential for proton exchange membrane water electrolysis. Full article

To improve the stability of high-temperature water electrolysis, I prepared membrane electrode assemblies (MEAs) using a decal method and investigated their water electrolysis properties. Nafion 115 and crosslinked sulfonated polyphenylsulfone (CSPPSU) membranes were used. IrO₂ was used as the oxygen evolution reaction (OER) catalyst, and Pt/C was used as the hydrogen evolution reaction (HER) catalyst. The conductivity of the CSPPSU membrane at 80 °C and 90% RH (relative humidity) is about four times lower than that of the Nafion 115 membrane. Single-cell water electrolysis was performed while measuring the current density and performing electrochemical impedance spectroscopy (EIS) at cell temperatures from 80 to 150 °C and the stability of the current density over time at 120 °C and 1.7 V. The current density of water electrolysis using Nafion 115 and CSPPSU membranes at 150 °C and 2 V was 1.2 A/cm² for both. The current density of the water electrolysis using the CSPPSU membrane at 120 °C and 1.7 V was stable for 40 h. The decal method improved the contact between the CSPPSU membrane and the catalyst electrode, and a stable current density was obtained. Full article

This work describes the synthesis of eight new Pd(II) and Pt(II) complexes with the general formula [M(TSC)Cl], where TSC represents the 4N-monosubstituted thiosemicarbazone derived from 2-acetylpyridine N-oxide with the substituents CH₃ (H4MLO), C₂H₅ (H4ELO), phenyl (H4PLO) and (CH₃)₂ (H4DMLO). These complexes have been characterized by elemental analysis, molar conductivity, IR spectroscopy, ¹H, ¹³C, ¹⁹⁵Pt and ESI-MS. The complexes exhibit a square planar geometry around the metallic center coordinated by a thiosemicarbazone molecule acting as a donor ONS-type pincer ligand and by a chloride, as confirmed by the molecular structures of the complexes, [Pd(4ELO)Cl] (3) and [Pd(4PLO)Cl] (5), determined by single-crystal X-ray diffraction. The ¹⁹⁵Pt NMR spectra of the complexes of formulae [Pt(4PLO)Cl] (6) and [Pt(4DMLO)Cl] (8) in DMSO show a single signal at −2420.4 ppm, confirming the absence of solvolysis products. Complexes 3 and 5 have been tested as catalysts in the Suzuki–Miyaura cross-coupling reactions of aryl bromides with phenylboronic acid, with yields of between 50 and 90% Full article

The catalytic conversion of naturally rich and renewable biomass into high-value chemicals is of great significance for pursuing a sustainable future and a green economy. The preparation of pentanediol from furfuryl alcohol is an important means of high-value conversion of biomass. The Pt-based catalyst supported on MgO was applied to the selective hydrogenation of biomass furfuryl alcohol to prepare pentanediol. By adjusting parameters such as catalyst loading, reduction temperature, reaction temperature, and pressure, a highly active catalyst was designed and the optimal catalytic hydrogenation conditions were determined. The hydrogenation experiment results showed that the selectivity of the 2Pt/MgO-200 catalyst for 1,2-pentanediol and 1,5-pentanediol reached 59.4% and 15.2%, respectively, under 160 °C and 1 MPa hydrogen pressure. The catalyst was characterized by X-ray powder diffraction (XRD), transmission electron microscopy (TEM), X-ray photoelectron spectrometer (XPS), CO₂-temperature programmed desorption (CO₂-TPD), and other methods. The characterization results indicate that the reduction temperature has a significant impact on the metal Pt, and an appropriate reduction temperature is beneficial for the hydrogenation performance of the catalyst. In addition, the basic sites on the carrier are also another important factor affecting the activity of the catalyst. In addition, stability tests were conducted on the catalyst, and the reasons for catalyst deactivation were studied using methods such as thermogravimetric analysis (TGA) and Fourier transform infrared spectroscopy (FT-IR). The results showed that the activity of the catalyst decreased after five cycles, and the deactivation was due to the hydrolysis of the carrier, the increase in metal particle size, and the surface adsorption of organic matter. Full article

With the urgent demand for clean energy, rechargeable zinc–air batteries (ZABs) are attracting increasing attention. Precious-metal-based electrocatalysts (e.g., commercial Pt/C and IrO₂) are reported to be highly active towards the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER). Nevertheless, the limited catalytic kinetics, along with the scarcity of noble metals, still hinder the practical applications of ZABs. Consequently, it is of great importance to explore efficient bifunctional ORR/OER electrocatalysts with abundant reserves. Although iron oxides are considered to have some of the greatest potential as catalysts among the metal oxides, owing to their excellent redox properties, lower toxicity, simple preparation, and natural abundance, their poor electrical conductivity and high agglomeration still limit their development. In this work, we report a special Se quantum dots@ CoFeO_x (Se-FeO_x-Co) composite material, which exhibits outstanding bifunctional catalytic properties. And the potential gap between ORR and OER is low at 0.87 V. In addition, the ZAB based on Se-FeO_x-Co achieves a satisfactory open-circuit voltage (1.46 V) along with an operation durability over 800 min. This research explores an effective strategy to fabricate iron oxide-based bifunctional catalysts, which contributes to the future design of related materials. Full article