Search Results (191)

K-ion batteries (KIB) are considered the future energy storage and conversion technology due to their remarkable performance. In this work, a high-temperature solid-state process was used to effectively synthesize KMnO₂, a promising cathode material for KIBs. The materials were examined using X-ray powder diffraction (XRPD), Raman and infrared spectroscopies, electron microscopy analysis, optical, and impedance spectroscopies. Rietveld refinement of X-ray diffraction data confirmed that the compound crystallizes in the monoclinic system with the P-2₁/m space group. Fourier transform infrared and Raman spectroscopies revealed the vibrational modes of the KMnO₂ compound and proved the existence of the octahedral environment MO₆ (M = Mn, K), which affirms structural configuration. The morphological distribution and grain size of the titled compound were examined using SEM studies. A direct band gap of around 3.12 eV was found by optical studies using UV–Vis spectroscopy, confirming the semiconducting nature of KMnO₂ and indicating its applicability for optoelectronic and energy-related applications. The characteristics of this material were further examined using impedance spectroscopy at temperatures between 343 and 443 K and a frequency range of 10⁻¹ Hz to 10⁶ Hz. The DC conductivity and relaxation time exhibited Arrhenius behavior, with a significant shift in activation energy at 373 K, suggesting a change in the conduction mechanism. The frequency behavior of AC conductivity, σ_ac, was analyzed using the universal Jonscher law. The findings of the charge transportation study on KMnO₂ indicate that this material follows a non-overlapping small polaron tunneling (NSPT) for T < 383 K and correlated barrier hopping (CBH) above for T > 383 K. A correlation between the ionic conductivity and the crystal structure was established and discussed. Full article

This paper presents the electrochemical behavior of stainless steel 304 (SS304), a material often utilized in the wine industry, in the presence of varying concentrations of ascorbic acid (AcAS), introduced in a neutral solution (Na₂SO₄ 0.25 M + 12% (v/v) EtOH). The experimental part of this paper included potentiodynamic polarization and chronoamperometry techniques to evaluate the influence of ascorbic acid on the corrosion processes in the test solutions. Electrochemical impedance spectroscopy (EIS) has been used to investigate the charge transfer at the interface and the formation of a protective film in the absence and presence of AcAS. The Tafel method was employed to determine the kinetic parameters of the corrosion process studied. Additionally, several models of adsorption isotherms were applied to describe the interactions between AcAS and the stainless steel surface, with the Freundlich and Dubinin–Radushkevich isotherms demonstrating the most robust correlation, based on the R² correlation coefficients. Quantum chemical calculations (DFT) were also performed to clarify the molecular mechanism via which AcAS functions as an eco-friendly corrosion inhibitor in winemaking-related environments. Full article

The hydrogen evolution reaction (HER) plays a central role in electrochemical hydrogen production and requires catalysts that combine high activity with reduced noble metal usage. In this work, palladium nanoparticles (PdNPs) were deposited onto silver nanowire-modified graphite electrodes (Pd/AgNW/C) to investigate the influence of Pd loading on HER kinetics and catalytic efficiency. The electrodes were prepared by constant-current electrodeposition and characterized using polarization measurements and electrochemical impedance spectroscopy (EIS). The direct current (DC) results showed a pronounced enhancement of HER activity in the presence of Pd, while the highest mass-specific activity was observed at low Pd loadings. Increasing the Pd content further increased the overall current but reduced the catalytic efficiency when normalized to the Pd mass. EIS measurements revealed two contributions to the impedance response associated with processes occurring on different timescales. With increasing cathodic overpotential, both the charge transfer resistance and the low-frequency resistance decreased markedly, indicating accelerated reaction kinetics. The combined DC and alternating current (AC) analyses suggest that the silver nanowire network facilitates efficient electron transport and promotes a favorable dispersion of Pd nanoparticles at low loadings, enabling efficient HER catalysis with reduced noble metal usage. Full article

Catalytic ozonation often suffers from a low ozone utilization rate and incomplete mineralization of organic pollutants. To address these challenges, we designed and prepared a novel catalyst via a one-step thermal polymerization method, anchoring single-atom manganese on a glucose-derived carbon network-modified C₃N₅ framework (Mn/C-C₃N₅). Aberration-corrected high-angle annular dark-field scanning transmission electron microscopy (AC-HAADF-STEM) on an FEI Titan Themis Z microscope confirmed the atomic dispersion of Mn sites, while Raman spectroscopy using a Renishaw inVia Reflex laser micro-Raman spectrometer verified the successful incorporation of a graphitic carbon network within the C₃N₅ matrix. Moreover, electrochemical analyses, including electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV) performed on a Bio-Logic SP-150 electrochemical workstation, demonstrated that the integration of the conductive carbon matrix substantially enhanced the interfacial charge transfer capability. The optimized Mn/C-C₃N₅ catalyst demonstrated exceptional performance in phenol mineralization, achieving a 97% total organic carbon (TOC) removal within 60 min, a remarkable improvement compared to pristine C₃N₅ (30%). Furthermore, the catalyst exhibited excellent operational stability, preserving more than 95% of its original activity over five repeated runs. Mechanistic investigations, including electron paramagnetic resonance (EPR) spectroscopy and radical quenching experiments, revealed that the Mn/C-C₃N₅ system accelerated the generation of multiple oxidizing radicals (•O₂⁻, ¹O₂, and •OH), with •OH identified as the predominant reactive species responsible for complete mineralization. This work establishes an integrated catalytic platform and provides fundamental insights into electronic structure modulation for designing advanced oxidation catalysts. Full article

We used synchrotron X-ray diffraction (XRD) and ac-impedance spectroscopy (AIS) to uncover the structural and chemical modifications undergone by RbH₂PO₄ (RDP) at intermediate temperatures (150 °C < T < 300 °C) and investigate their relationship with RDP’s proton conductivity, σ. Nyquist plots collected on RDP samples sealed in a small volume (~50 mL) of dry air show a gradual increase in σ upon heating from 180 to 260 °C, but not the three-order-of-magnitude superprotonic jump observed in the Cs-based compound CsH₂PO₄ (CDP) within the same temperature range. Correspondingly, XRD measurements using synchrotron radiation (λ = 0.922 Å) on RDP crystalline powders sealed in a quartz capillary exhibit no evidence of a monoclinic-to-cubic superprotonic phase transition like the one observed in CDP. Instead, these temperature-resolved powder XRD patterns demonstrate that the intermediate-temperature RDP monoclinic phase (P2₁/m, a = 7.733 Å, b = 6.189 Å, c = 4.793 Å, and β = 109.21 deg) persists up to the melting point of the title compound. Our most significant finding comes from heating RDP under high pressure (P = 1 GPa), which leads to markedly different structural behavior. Indeed, our full profile refinements against XRD data collected on RDP crystals compressed at ~1 GPa show evidence of a polymorphic phase transition (at T_c = 300 °C) to a high-temperature cubic phase (Pm-3m, a = 4.784 Å) that is isomorphic with its CDP counterpart. This is significant, as it indicates that the superprotonic conduction in phosphate solid acids is not cation-specific, and a general highly efficient proton conduction mechanism is present in the high-temperature phases of these materials. Full article

Mixed-anion silicate–phosphate oxysulfide glasses have attracted increasing interest due to their tunable thermal stability, electrical response, and potential use in functional glass and glass–ceramic materials. In this work, silicate–phosphate oxysulfide glasses in the SiO₂-P₂O₅-K₂O-MgO-SO₃-ZnO system were examined to determine how partial substitution of MgO with ZnO influenced their thermal and electrical properties under reducing conditions. Melting in a strongly reducing atmosphere predominantly converted sulfur to reduced sulfur species, producing mixed oxygen–sulfur glass networks. Differential scanning calorimetry (DSC) shows that ZnO substitution reduces the configurational heat capacity at the glass transition (ΔC_p) by up to ~40%, suppresses crystallization exotherms, and shifts crystallization onset temperatures by more than 100 °C toward higher values, indicating enhanced network rigidity. Potassium and magnesium K-edge X-ray absorption spectroscopy (XAS) revealed increased short-range ordering around Mg²⁺ in Zn-free glasses after heat treatment, whereas Zn-containing glasses remain more structurally disordered. Impedance spectroscopy demonstrated that ZnO-substituted glasses exhibit higher activation energies for electrical transport (≈0.9–1.0 eV) and lower AC conductivity compared to Zn-free compositions, reflecting restricted alkali-ion mobility. These results demonstrate that partial substitution of MgO with ZnO significantly enhances the thermal stability and electrical insulating behavior of reduced silicate–phosphate oxysulfide glasses, providing valuable structure–property insights for the design of thermally stable functional glasses and glass–ceramics. Full article

The development of hybrid organic coatings for corrosion protection remains a key research priority. This study focuses on synthesising Layered Double Hydroxide (ZnGa-LDHs) intercalated with environmentally friendly disodium sebacate (SB) corrosion inhibitor, forming ZnGa-SB. To overcome the challenge of limited dispersibility in organic coatings, ZnGa-SB was combined with Graphene Nanoribbons (GNR), produced through the oxidative unzipping of multi-walled carbon nanotubes (MWCNT). The resulting composite, ZnGa-SB/GNR, was synthesised using an in situ hydrothermal method and incorporated into polyurethane (PU) enamel. The synergy between high-barrier GNRs and active ZnGa-SB creates a “labyrinth effect” that effectively inhibits the diffusion of corrosive species. Microstructural analysis, including XRD, FT-IR, Raman, TGA, FE-SEM, and EDS, confirmed the nanofiller structure. The nanofillers were embedded into acrylic resin (AC) for short-term anticorrosive testing in a 0.1 M NaCl solution and then into PU for long-term evaluation in a 3.5 wt% NaCl solution, using electrochemical impedance spectroscopy (EIS). The PU/ZnGa-SB/GNR coating exhibited a high impedance modulus of 5.90 × 10⁷ Ω cm² at |Z|_0.01 Hz, even after 2688 hours of immersion, indicating enhanced corrosion resistance. This coating demonstrated superior performance in cross-cut and pencil hardness tests and sustained less damage in salt spray analysis compared to other coatings. The synergistic effect offers a promising approach for developing next-generation hybrid anti-corrosive coatings. Full article

We report the synthesis and multifunctional characterization of copper-reinforced Ba_0.85Sr_0.15TiO₃ (BST) ceramic composites with Cu contents ranging from 0 to 40 wt%, prepared by a sol–gel route and densified using spark plasma sintering (SPS). X-ray diffraction and FT-IR analyses confirm the coexistence of cubic and tetragonal BST phases, while Cu remains as a chemically separate metallic phase without detectable interfacial reaction products. Microstructural observations reveal abnormal grain growth induced by localized liquid-phase-assisted sintering and progressive Cu agglomeration at higher loadings. Scanning electron microscopy reveals abnormal grain growth, with the average BST grain size increasing from approximately 3.1 µm in pure BST to about 5.2 µm in BST–Cu40% composites. Optical measurements show a continuous reduction in the effective optical bandgap (apparent absorption edge) from 3.10 eV for pure BST to 2.01 eV for BST–Cu40%, attributed to interfacial electronic states, defect-related absorption, and enhanced scattering rather than Cu lattice substitution. Electrical characterization reveals a percolation threshold at approximately 30 wt% Cu, where AC conductivity and dielectric permittivity reach their maximum values. Impedance spectroscopy and equivalent-circuit analysis demonstrate strong Maxwell–Wagner interfacial polarization, yielding a maximum permittivity of ~1.2 × 10⁵ at 1 kHz for BST–Cu30%. At higher Cu contents, conductivity and permittivity decrease due to disrupted Cu connectivity and increased porosity. These findings establish BST–Cu composites as tunable ceramic–metal systems with enhanced dielectric and optical responses, demonstrating potential for specialized high-capacitance decoupling applications where giant permittivity is prioritized over low dielectric loss. Full article

The compounds LiCo_1−xMn_xO₂ (x = 0.5, 0.7) were synthesized via the solid-state method and exhibited crystallization in the cubic spinel structure (space group Fd-3m). UV–Vis spectroscopy reveals strong visible-light absorption and a reduction in the indirect optical band gap from 1.85 eV (x = 0.5) to 1.60 eV (x = 0.7) with increasing Mn content, which is consistent with semiconducting behavior. This narrowing arises from Mn³⁺/Mn⁴⁺ mixed valence, which introduces mid-gap states and enhances Co/Mn 3d–O 2p orbital hybridization within the spinel framework. In contrast, the Urbach energy increases from 0.55 eV to 0.65 eV, indicating greater structural and energetic disorder in the Mn-rich composition which is attributed to the Jahn–Teller distortions and valence heterogeneity associated with Mn³⁺. Impedance and dielectric modulus analyses confirm two distinct non-Debye relaxation processes related to grains and grain boundaries. AC conductivity is governed by the Correlated Barrier Hopping (CBH) model, with bipolaron hopping identified as the dominant conduction mechanism. The x = 0.7 sample displays significantly enhanced conductivity due to increased Mn³⁺/Mn⁴⁺ mixed valence, lattice expansion, efficient 3D electronic connectivity of the spinel lattice, and reduced interfacial resistance. These findings highlight the potential of these two spinels compounds as narrow-gap semiconductors for optoelectronic applications including visible-light photodetectors, photocatalysts, and solar absorber layers extending their utility beyond conventional battery cathodes. Full article

A hollow fiber-supported polymeric mixed-matrix membrane, consisting of a Pebax-1657 matrix and graphene nanoplatelet (GNP) fillers as the selective layer, was tested for CO₂/CH₄ gas separation at transmembrane pressures up to 30 bar(a). Using a custom, novel, membrane module, we simultaneously performed permeability/selectivity and in situ electric impedance spectroscopy measurements. This in situ technique is proposed here for the first time. Furthermore, stable mixed-gas selectivities, for 10% CO₂ in CH₄ gas, reaching up to 61.4 (M0) and 68.5 after heat treatment (M2) were observed at 20–30 bar(a), whereas the stressed state (M1) dropped to ~22. Throughout the whole procedure of the three (initial, degraded, and restored) membrane testing assessments, a gradual decline in gas permeability coupled with a corresponding increase in the membrane’s AC resistance, due to membrane compaction, was evident. More specific, the membrane’s AC resistance, R₁, increased from ~96–147 ΜΩ (M0) to ~402–435 ΜΩ (M1) and ~5390–5700 ΜΩ (M2), while the peak-phase frequency f_p decreased from ~1.25 kHz (M0) to ~340 Hz (M1) and ~115 Hz (M2). Overall, this work proposes a new tool/method for connecting membrane’s deterioration phenomena with AC resistance and demonstrates that a facile heat treatment can restore selectivity following compaction, despite the absence of full permeance recovery. Full article

Tantalum nitride (TaN) coatings are valued for their hardness, chemical inertness, and biocompatibility; however, they lack intrinsic antibacterial properties, which limits their application in biomedical environments. Introducing copper (Cu) into the TaN matrix offers a potential solution by combining TaN’s mechanical and chemical durability with Cu’s well-documented antimicrobial action. This study explores how varying copper incorporation affects the structural, electrical, photocatalytic, and antibacterial characteristics of TaCuN multilayer films synthesized via reactive magnetron sputtering. Three thin TaCuN films were fabricated using a high-power reactive magnetron co-sputtering system, varying the Cu target power to control the composition. Structural and morphological analysis was performed using X-ray diffraction (XRD), scanning/transmission electron microscopy (STEM/TEM), and energy-dispersive X-ray spectroscopy (EDS). Electrical conductivity was studied along and across the film surfaces at temperatures ranging from 20 to 375 K using AC impedance spectroscopy. Optical and photocatalytic properties were assessed using UV–Vis spectroscopy and methylene blue degradation tests. Antibacterial activity against Staphylococcus aureus was analyzed under visible light using CFU reduction tests. XRD and TEM analyses revealed a multilayered four-zone architecture with alternating Ta-, Cu-, and N-rich phases and a dominant cubic δ-TaN pattern. The layers exhibited pronounced conductivity anisotropy, with in-plane conductivity (~10³ Ω⁻¹ cm⁻¹) exceeding cross-plane conductivity by ~10⁷ times, attributed to the formation of a metallic conduction channel in the mid-layer. Optical spectra indicated limited light absorption above 300 nm and negligible photocatalytic activity. Increasing the Cu content substantially enhanced antibacterial efficiency, with the highest-Cu sample achieving 95.6 % bacterial growth reduction. Morphological evaluation indicated that smooth film surfaces (Ra < 0.2 μm) effectively minimized bacterial adhesion. Reactive magnetron sputtering enables the precise engineering of TaCuN multilayers, combining high electrical anisotropy with robust antibacterial functionality. The optimized TaCuN coating offers promising potential in biomedical and protective applications where both conductivity and microbial resistance are required. Full article

We present a time-domain direct current (DC) approach to differentiate positive- (PE) and negative-electrode (NE) contributions from two-electrode full-cell signals in lithium-ion batteries, enabling electrode-resolved diagnostics without specialized instrumentation. The responses of a LiNi_0.8Co_0.1Mn_0.1O₂ (PE)/graphite (NE) cell were recorded across −20 to 20 °C during galvanostatic pulses and subsequent open-circuit relaxations, alongside electrochemical impedance spectroscopy (EIS) measurements. These responses were analyzed using an equivalent-circuit-based model to decompose them into terms with characteristic times. Their distinct temperature dependences enabled attribution of the dominant terms to PE or NE, especially at low temperatures where temporal separation is substantial. The electrode attribution and activation energies were cross-validated against three-electrode measurements and were consistent with EIS-derived time constants. Reconstructing full-cell voltage transients from the identified terms reproduced the measured electrode-specific behavior, and quantitative comparisons showed that the DC time-domain separation aligned closely with directly measured PE/NE overpotentials during the current pulse. These results demonstrate a practical pathway to extract electrode-resolved information from cell voltage alone, offering new methodological possibilities for battery diagnostics and management while complementing three-electrode and alternating current (AC) techniques that are often constrained in field applications. Full article

There is a knowledge gap about the effect of pharmaceutical agents on the biodegradation of Mg-based resorbable implants. The present work investigates how three common antibiotics and three anti-inflammatory drugs affect the corrosion of high-purity Mg, with and without ceramic and hybrid ceramic/polymeric coatings, using electrochemical impedance spectroscopy and hydrogen evolution tests. A Ca-P-Si-based ceramic coating is developed using plasma electrolytic oxidation (PEO), after the AC voltage and frequency parameters are optimized. A hybrid coating included a PEO and a poly(ε-caprolactone) (PCL) top layer formed by dip coating. High-purity Mg exhibited an instantaneous onset of corrosion with a corrosion rate of 90 μm/year after 24 h of immersion in a modified α-MEM. A hybrid PEO/PCL coating prevents the onset of corrosion for at least 5 h and reduces the H₂ evolution during the following 90 h by two times by the precipitation of 5–40 μm thick Ca-P surface deposits. Gentamicin, naproxen, streptomycin, ciprofloxacin and paracetamol were found to be corrosion accelerators with respect to bare h.p. Mg, whereas aspirin was found to be an inhibitor. Streptomycin-functionalized PEO/PCL system exhibited an active protection mechanism, triggered upon the release of the coating and substrate cations, associated with the coating defect-blocking action of the insoluble Me(II)-streptomycin chelates. Full article

Dielectric characterization offers valuable insights into fruit structure, ripening, and storage stability. However, systematic studies on apples are still limited. This work elucidates the electrical and physicochemical properties of a specific variety of apples, Malus domestica, using Electrochemical Impedance Spectroscopy (EIS), a non-destructive, fast and cost-effective technique, suitable for real-time quality assessments. The apple samples were analyzed over the frequency range of 20 Hz–120 MHz at 25 °C, and impedance data were modeled using equivalent circuits and dielectric relaxation models. Physicochemical analyses confirmed a high moisture content (84%, wwb), pH 4.81, TSS 14.58 °Brix, and acidity 0.64%, which is typical of fresh Red Delicious apples. Impedance spectra revealed semicircular and Warburg elements in Nyquist plots, indicating resistive, capacitive, and diffusive processes. Equivalent circuit fitting with the proposed R-C-Warburg impedance model outperformed (R² = 0.9946 and RMSE = 6.610) the classical Cole and Double-Shell models. The complex permittivity (ε) represented a frequency-dependent ionic diffusion, space-charge polarization, and dipolar relaxation decay, while electrical modulus analysis highlighted polarization and charge carrier dynamics. The translational hopping of charge carriers was confirmed through AC conductivity following Jonscher’s power law with an exponent of ƞ = 0.627. These findings establish a comprehensive dielectric profile and advanced circuit fitting for biological tissues, highlighting a promising non-invasive approach using EIS for real-time monitoring of fruit quality, with direct applications in post-harvest storage, supply chain management, and non-destructive quality assurance in the food industry. Full article

Electric fields (EFs) have emerged as effective, non-chemical tools for modulating microbial populations in complex matrices such as wastewater. This review consolidates current advances on EF-induced alterations in microbial structures and functions, focusing on both vegetative cells and spores. Key parameters affected include membrane thickness, transmembrane potential, electrical conductivity, and dielectric permittivity, with downstream impacts on ion homeostasis, metabolic activity, and viability. Such bioelectrical modifications underpin EF-based detection methods—particularly impedance spectroscopy and dielectrophoresis—which enable rapid, label-free, in situ microbial monitoring. Beyond detection, EFs can induce sublethal or lethal effects, enabling selective inactivation without chemical input. This review addresses the influence of field type (DC, AC, pulsed), intensity, and exposure duration, alongside limitations such as species-specific variability, heterogeneous environmental conditions, and challenges in achieving uniform field distribution. Emerging research highlights the integration of EF-based platforms with biosensors, machine learning, and real-time analytics for enhanced environmental surveillance. By linking microbiological mechanisms with engineering solutions, EF technologies present significant potential for sustainable water quality management. Their multidisciplinary applicability positions them as promising components of next-generation wastewater monitoring and treatment systems, supporting global efforts toward efficient, adaptive, and environmentally benign microbial control strategies. Full article