Search Results (236)

In this study, we combine experimental and computational approaches to elucidate a density functional theory (DFT)-derived mechanism for superoxide scavenging by resveratrol, piceatannol, and oxyresveratrol. Using rotating ring–disk electrode (RRDE) hydrodynamic voltammetry, the superoxide radicals are generated in situ, allowing direct measurement of antioxidant activity. Data show that the catechol-containing piceatannol is approximately four times more active than resveratrol, while resveratrol and oxyresveratrol exhibit similar efficiencies, indicating that the additional 2′-OH group in oxyresveratrol has minimal impact. Vitamin C (ascorbic acid) facilitates scavenging by acting as a proton donor for resveratrol, piceatannol, and 4′-OH oxyresveratrol, but it is unable to deprotonate the 2′OH group of oxyresveratrol. The experimental results suggest a superoxide dismutase (SOD)-like mechanism, obtained from energetically feasible DFT calculations, in which these stilbenes convert two superoxide anions into H₂O₂ and O₂, helped by vitamin C. Mechanistically, the first superoxide is reduced by abstracting a hydroxyl-group hydrogen atom, while the second undergoes oxidation via π–π interaction with the aromatic system, releasing O₂. Notably, resveratrol can be regenerated through a catalytic cycle involving vitamin C. These data underscore the SOD-mimicking properties of dietary polyphenols and suggest a need to reevaluate resveratrol’s clinical utility regardless of its low bioavailability. Full article

Hydrogen sulfide (H₂S) is a toxic and biologically relevant gas, necessitating sensitive and interference-resistant detection methods for environmental monitoring. Here, we develop a donor–acceptor molecular platform incorporating a polarized conjugated double bond bridge and demonstrate its application, using YG2 as the representative probe, as a dual-peak ratiometric UV–Vis sensor for H₂S. UV–Vis spectroscopy, supported by ¹H NMR analysis, indicates HS^--induced interaction with the conjugated linkage, leading to disruption of π-conjugation, suppression the intramolecular charge-transfer (ICT) band at 409 nm, and enhancing the locally excited (LE) band at 279 nm. The ratiometric parameter log(Abs₂₇₉/Abs₄₀₉) affords a linear response over the concentration range of 1.0 × 10⁻⁶–1.0 × 10⁻⁴ M with a detection limit of 8.3 × 10⁻⁷ M, providing approximately an order-of-magnitude improvement in analytical sensitivity compared with single-wavelength methods, and the reaction reaches completion within ~10 s. YG2 exhibits excellent selectivity toward H₂S over common anions and enables accurate quantification in real water samples, with recoveries of 95.43–105.86% and relative standard deviations (RSDs) of 0.56–9.58%. These results suggest that YG2 is a rapid, self-calibrating, and spectroscopically interpretable ratiometric probe suitable for reliable H₂S detection in complex aqueous environments. Full article

This study presents the synthesis and use of a novel bamboo-derived magnetic activated carbon (BMAC) for the effective removal of cationic and anionic dyes, specifically methylene blue (MB), methyl orange (MO), and sunset yellow (SY), from aqueous solutions. The adsorbent was synthesized using thermal carbonization and subsequent inclusion of magnetic oxide, yielding a porous structure with improved adsorption and magnetic separation properties. Thorough characterization utilizing SEM, EDX, BET, FTIR, XRD, and TGA/DTA validated the creation of a highly porous material including uniformly dispersed magnetic particles and several surface functional groups. Batch adsorption tests were performed to examine the influences of contact time, adsorbent dosage, initial dye concentration, pH, and temperature. The findings indicated rapid adsorption kinetics, with equilibrium reached in around 60–70 min, and adsorption capacity ranked as MB > MO > SY. Augmenting adsorbent dosage enhanced removal efficiency but diminished adsorption capacity per unit mass due to site unsaturation. The maximum adsorption capacities (q_m) of BMAC were 58.9, 56.3, and 32.7 mg/g for MB, MO, and SY, respectively, as determined from the Langmuir isotherm model, indicating superior performance compared with other reported magnetic activated carbon. The adsorption process was determined to be exothermic and spontaneous, as evidenced by thermodynamic characteristics. The equilibrium data were optimally characterized by the Langmuir isotherm model, indicating monolayer adsorption, whereas the kinetic studies conformed to the pseudo-second-order model, signifying that chemisorption is predominant. The adsorption mechanism encompasses electrostatic interactions, π–π stacking, hydrogen bonding, van der Waals forces, pore filling, and surface complexation with magnetic oxides. The findings indicate that BMAC is an efficient, sustainable, and magnetically recoverable adsorbent for the elimination of both cationic and anionic dyes from wastewater. Full article

A novel series of hybrid tetrahydro-β-carboline (THβC)-imidazolium (IM) salts incorporating a fused diketopiperazine scaffold was designed, synthesized, and evaluated as cholinesterase inhibitors for potential application in Alzheimer’s disease. The molecular design integrates a π-conjugated THβC core with a cationic IM moiety to promote dual-site interactions within the acetylcholinesterase (AChE) active-site gorge. All compounds exhibited micromolar inhibitory activity against AChE and butyrylcholinesterase (BChE), with a pronounced preference for AChE. The most active derivative, 12d, showed an IC₅₀ value of 0.72 μM toward AChE, while compound 12c demonstrated the highest selectivity (SI = 8.4). Structure–activity relationship studies revealed that both stereochemistry and N-alkyl chain length are critical determinants of activity, with S,S-configured derivatives consistently outperforming their R,R-configured analogs. In silico ADMET analysis indicated favorable physicochemical properties and predicted central nervous system permeability, although potential hepatotoxicity highlights the need for further optimization. Molecular docking studies suggested that the most promising compound adopts a dual-binding mode, interacting with both the peripheral anionic site and catalytic active site of AChE. These results identify THβC-IM hybrids as a structurally novel and promising scaffold for the development of selective cholinesterase inhibitors, providing a basis for further optimization toward multifunctional anti-Alzheimer agents. Full article

Adsorption properties of graphene oxide (GO) and its organo-modified analog (GO-HDTMA), treated with the hexadecyltrimethylammonium (HDTMA) cationic surfactant, were evaluated for the removal of persistent pharmaceutical products (PPs): an anionic diclofenac (DCF) anti-inflammatory, a cationic metoprolol (MTP) beta-blocker, and a nonionic sulfamethoxazole (SMX) antibiotic. Adsorption isotherms, fitted by Langmuir and Freundlich models, together with FTIR data, demonstrate that both GO and GO-HDTMA are effective adsorbents for DCF. The adsorption is primarily governed by both π–π and van der Waals interactions, leading to saturation of the accessible C sp² carbon domains at a maximum uptake of 4.2 mmol g⁻¹. In contrast, due to its cationic nature, MTP is not removed using GO-HDTMA, while it is effectively adsorbed at about 0.5 mmol g⁻¹ for GO via electrostatic attractive forces. SMX is adsorbed by both materials, although its uptake remains limited on GO. The presence of hydrophobic domains in GO-HDTMA enhances SMX adsorption through weak intermolecular interactions. These results highlight the tunability of GO-based hybrid materials and their potential for the selective removal of a large spectrum of emerging pharmaceutical contaminants. Full article

Primary aromatic amines (PAAs), such as 4,4′-methylenedianiline (MDA) and 4-chloroaniline (4-CA), are toxic, carcinogenic, and persistent pollutants widely detected in aquatic environments. To address this issue, UiO-66 was modified through nitro functionalization, copper doping, and defect regulation, and further integrated with chitosan (CS) to construct a composite aerogel (CS@CuUiO-66-NO₂) for the removal of MDA and 4-CA from wastewater. The adsorbent demonstrated relatively fast adsorption kinetics (MDA: 6 h; 4-CA: 4 h) and high adsorption capacities (MDA: 643.74 mg·g⁻¹; 4-CA: 491.54 mg·g⁻¹), showing improved performance compared to pristine UiO-66 and many previously reported adsorbents under similar conditions. The enhanced adsorption performance is likely attributed to the synergistic effects of multiple interactions, including hydrogen bonding, π-π interactions, and possible coordination interactions between functional groups of the adsorbent and PAAs. Moreover, the adsorbent maintained good adsorption performance after five adsorption–desorption cycles, with only a slight decrease in efficiency (~8%), and exhibited limited interference from coexisting anions. Overall, this study presents a feasible strategy for designing porous composite adsorbents with favorable reusability for potential applications in aqueous pollutant remediation. Full article

Perylene bisimide derivatives are typical n-type semiconductors as well as redox-active materials. However, it has been difficult to produce thin films by solution processes because of their low solubilities in organic solvents. Perylene bisimide derivatives bearing oligosiloxane moieties exhibit columnar phases over wide temperature ranges, including room temperature and high solubilities in organic solvents. The columnar phases are stabilized by nanosegregation between crystal-like one-dimensional π-stacks and liquid-like mantle consisting of oligosiloxane moieties. The electron mobility at room temperature exceeded 0.1 cm²V⁻¹s⁻¹ in the ordered columnar phases of perylene bisimide derivatives bearing four disiloxane chains. Uniaxially aligned thin films of the perylene bisimide derivatives bearing oligosiloxane moieties could be produced by a spin-coating method. The spin-coated films of the perylene bisimide derivatives bearing cyclotetrasiloxane rings could be insolubilized via in situ ring-opening polymerization by the exposure of the thin films to trifluoromethanesulfonic acid vapors. Uniaxially aligned thin films of perylene bisimide derivatives bearing an ethylene oxide chain as well as cyclotetrasiloxane rings could be doped in an aqueous solution of sodium dithionate, resulting in an anisotropic electrical conductivity. Polymerized thin films of perylene bisimide derivatives bearing a crown ether ring exhibited electrochromism in electrolyte solutions. These compounds formed 1:1 complexes with lithium triflate, exhibiting columnar phases at room temperature. The nanostructures of the complexes were stabilized by the electrostatic interaction between cationic crown-metal units and triflate anions. Full article

Coal-bed gas well production is too low to realize a highly efficient exploitation of the #8 coal seam in the Shanxi formation in the Nalin region. Based on the reservoir characteristics, the designed poly-aromatic-grafted silicon-quantum-dot-based desorption agent (PQS) has been developed. Then, the adsorption/desorption behavior of CBM on the coal surface under the influence of this active chemical has been studied, and the synergy effect with an anionic–nonionic surfactant to desorption of CBM has also been discussed. The results show that the developed poly-aromatic-grafted silicon quantum dot, with a median size of 4.9 nm and +5.6 mV of zeta potential in neutral condition, has a significant emission peak with 470 nm at the excitation of 380 nm and 150,000 mg/L of salinity resistance, which also generates a strong adsorption capacity on the coal surface. A promoting effect to desorption of CBM for PQS nanofluid is exhibited and the Langmuir pressure is obviously increased. However, when the PQS nanofluid is synergized with an anionic–nonionic surfactant, the desorption of CBM is further improved and the wettability of the coal surface is altered from 78.2° to 84.2°. The desorption rate for this compound system reached 65.3%. It can be found that combining the quantum size, π–π stacking, π–π conjugation, and the synergy effect between PQS nanofluid and surfactant fluid with the traditional intermolecular force has a stronger capacity for promoting desorption of CBM than the conventional desorption agent. This study provides guidance for the molecular design of the desorption agent for deep coal rock and the application of silicon quantum dots. Full article

An anthraquinone chromophore displaying a vivid violet color in solution was synthesized and it was thoroughly characterized both spectroscopically and electrochemically, along with its X-ray crystallography. Single crystal X-ray analysis of the chromophore revealed a nearly planar π-conjugated framework with short intermolecular contacts. Cyclic voltammetry revealed two consecutive one-electron reductions, corresponding to the formation of its radical anion and dianion. The spectroelectrochemistry of the chromophore confirmed two distinct and reversible color changes with the stepwise electrochemical reduction. These were quantified via the CIE L a* b* color space. Large optical differences (98%) between the bleached and colored states were observed along with a coloration efficiency of 698 cm²/C. These parameters confirm the anthraquinone is an ideal electrochrome: capable of reversibly switching its colors with applied potential. The three color changes and color bleaching associated with the neutral, radical anion, dianion, and cation, respectively, are also of interest for extending the palette of colors of molecular electrochromes toward panchromatic color tuning with molecular structure for use in smart windows and displays. Full article

Sodium-pumping NADH: ubiquinone oxidoreductase (Na⁺-NQR) is an important component of the aerobic respiratory chain of Vibrio cholerae. It oxidizes NADH, reduces ubiquinone, and uses the free energy of this redox reaction to move sodium across the cell membrane. The enzyme is a membrane complex of six subunits, two 2Fe−2S centers, and four flavins. Both the oxidized and reduced forms of Na⁺-NQR exhibit EPR signals due to flavin semiquinone radicals. It has been shown that in the oxidized form of the enzyme, the radical is a neutral flavin, while in the NADH-reduced form, the radical is an anionic flavin. Electron Spin Echo Envelope Modulation Spectroscopy (ESEEM) was used to probe the presence of the magnetic nucleus ²³Na in the immediate vicinity of the paramagnetic centers. The contribution of the ²³Na nucleus was observed only in the ESEEM spectra of the anionic flavin semiquinone previously assigned to FMN_NqrB. Analysis shows that the Na⁺ ion is within ~3–4 Å of the flavin radical. This distance is consistent with two models: (i) complexation of the Na⁺ ion with the carbonyl group of CO4; or alternatively, (ii) a “cation-π interaction,” between Na⁺ and the electron-rich π-system of the flavin aromatic rings. Full article

Both s-tetrazine and picric acid are widely known compounds in the realm of high-energy materials. We had previously taken an interest—mostly supramolecular, i.e., directed at the elucidation of lone pair–π interactions—in the crystal packing of phases containing s-tetrazine-based cations and picrate anions. Herein we report two novel compounds of this family: H₂L4(picr)₂ and (H₂L5)₂(picr)₄; the former is a polymorph of a previously reported compound of a homologous host series (3,6-bis(4-morpholinobutyl)-1,2,4,5-tetrazine), the latter a salt of the commercially available 3,6-di(pyridin-4-yl)-1,2,4,5-tetrazine. The new phases were investigated via XRD: main interactions, crystal packing, and potential slip planes are discussed. Thermal analysis (DSC/TGA) was conducted for L5 and (H₂L5)₂(picr)₄. Enthalpies of formation (thermochemical cycles/DFT) and in silico explosion parameters (EXPLO5) are reported for all compounds. Overall, the data herein reported improve the understanding of the correlation among supramolecular/packing details and the resulting explosive properties. Full article

Two crystals of N,N′-bis(phosphonomethyl)-1,4,5,8-naphthalenediimide were grown in the presence of neutral (water) and charged (imidazolium cation) species, yielding [(H₂O₃P)CH₂-(C₁₄H₄N₂O₄)-CH₂(PO₃H₂)]∙H₂O (1) and [C₃H₅N₂][(H_1.5O₃P)CH₂-(C₁₄H₄N₂O₄)-CH₂(PO₃H_1.5)] (2), respectively. The ligand N,N′-bis(phosphonomethyl)-1,4,5,8-naphthalenediimide was synthesized via the condensation of naphthalene-1,4,5,8-tetracarboxylic dianhydride with (aminomethyl)phosphonic acid in N,N′-dimethylformamide or imidazole. The flexible N-methyl phosphonic acid groups adopt a cis configuration in compound 1 and a trans configuration in compound 2. In compound 1, the phosphonate groups engage in extensive hydrogen bonding, as well as with water molecules and π–π stacking, resulting in a three-dimensional closely packed structure. Compound 2 forms a densely packed three-dimensional network stabilized by charge-assisted hydrogen bonding (anion-cation), anion–π interactions, and π–π stacking interactions. Hirshfeld surface analysis was conducted and the associated two-dimensional fingerprint plots were generated to further elucidate the nature and contributions of these noncovalent interactions. Direct bandgap measurements estimated from Tauc plots yielded values of 2.92 eV and 2.85 eV for compounds 1 and 2, respectively, highlighting their potential as promising n-type organic semiconductors. Thermal analysis reveals that compound 2 exhibits greater thermal stability than compound 1. Full article

Four benzyltrimethylammonium (BTMA) salts were successfully prepared: bis(benzyltrimethylammonium) hexachloroplatinate (1), benzyltrimethylammonium tetrachloroaurate (2), bis(benzyltrimethylammonium) tetrachlorocuprate (3), and bis(benzyltrimethylammonium) tetrabromocuprate (4) from benzyltrimethylammonium hydroxide (Triton B). Their crystal structures were determined by single-crystal X-ray diffraction, and the supramolecular architectures were characterized hierarchically. Extended Hirshfeld surface analysis, including enrichment ratio calculations, was performed to evaluate intermolecular interactions. Nonclassical hydrogen bonds, such as C–H^…Cl(Br), involving the anions, contribute to the formation of self-assembled architectures. Additional stabilization arises from π^…π and Cu–Br^…π interactions, particularly in crystals 2 and 4, respectively. Hirshfeld surface analysis showed that H^…H and C^…H/H^…C interactions are the dominant contributors in all crystals. According to enrichment ratio calculations, C^…H/H^…C interactions in 1, 3, and 4; Cl^…H/H^…Cl in 1 and 3; Cu^…H/H^…Cu in 3 and 4; and Br^…H/H^…Br and Br^…C/C^…Br in 4 are statistically favored in the crystal packing. Halogen bonding Cl^…Cl was observed in 1 but does not significantly influence packing. Energy framework calculations indicated that dispersive interactions are favorable in the analyzed crystals. A library of H-bonding supramolecular patterns, including interchangeable synthons, is provided and may guide the rational design of new derivatives with controllable features. Finally, the topology of intermolecular connections and the electronic structure of the benzyltrimethylammonium cation, investigated by quantum-chemical calculations, provide insights into its reactivity. Full article

A quaternized and phenyl-functionalized hyperbranched PEI-based sponge (S_HPEI-QP) was successfully prepared, and its adsorption performance was investigated to evaluate its potential for removing the anionic non-steroidal anti-inflammatory drug (ibuprofen (IBU)). We reported that the synthesis of polyethyleneimine-based sponges was achieved through cryo-polymerization using 1,4-butanediol diglycidyl ether (BDDE) as the crosslinking agent. Subsequent functionalization with resorcinol diglycidyl ether (RDGE) and trimethylamine introduced quaternary ammonium cations, imparting strong basicity and hydrophilicity, as well as phenyl groups, conferring hydrophobic characteristics, respectively. The aforementioned sponge material, S_HPE-QPI, primarily facilitates the efficient adsorption of IBU in aqueous solutions through the anion exchange properties of quaternary ammonium groups and the π-π interactions associated with oxygen-activated benzene rings. Various characterizations, such as scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FT-IR), X-ray photoelectron spectroscopy (XPS), and specific surface area determination method (BET), confirmed the successful synthesis of the bifunctionalized S_HPEI-QP adsorbent. This adsorbent features a porous structure (specific surface area of 77.2 m² g⁻¹ and pore size distribution of 25–100 nm) and an isoelectric point (pH_pzc) of 9.38. The adsorption kinetics of the adsorbent for IBU were extremely rapid and conformed to a pseudo-second-order kinetic model, and the adsorption isotherm aligned with the Langmuir isotherm model. Noteworthily, S_HPEI-QP demonstrated an exceptionally high adsorption capacity for IBU, achieving a maximum uptake of 905.73 mg g⁻¹ at pH 7.0, which surpassed that of most of the previous reported adsorbents. Moreover, the sponge material can be chemically regenerated. After eight cycles of use, the adsorption efficiency decreased by only 4%. These findings suggest that the synthesized dendritic anion exchange adsorbent represents a promising candidate for the removal of IBU from contaminated water sources. Full article

Ligands L1 and L2 are composed, respectively, by a diethylenetriamine or a dipropylenetriamine moiety linked at their extremities to anthracene units through methylene bridges and form stable 1:1 complexes with Zn(II), in which the metal is coordinated by all three nitrogens of the ligands. Zn(II) binding by L1 leads to a marked enhancement of the fluorescence emission, thanks to the inhibition of the photoinduced electron transfer (PET) process from the benzylic amine groups of the triamine sub-unit to the excited fluorophore, which normally quenches the emission of fluorescent polyamine receptors. Conversely, the emission of L2 is somewhat quenched by Zn(II) binding likely due—as also indicated by ab initio calculations and molecular dynamics simulations—to the formation of cation π quenching contacts between the metal and the anthracene moieties that overcome the effects of PET inhibition. The Zn(II) complexes of both ligands are able to bind ketoprofen (KP) in its anionic form, thanks to the formation of COO⁻—Zn(II) coordinative bonds, to form [KPZnL]⁺ and [(KP)₂ZnL] (L = L1 or L2) ternary adducts. While KP binding to [ZnL2]²⁺ enhances the fluorophore emission, coordination of KP to [ZnL1]²⁺ slightly reduces the anthracene emission, due, once again, to the formation in the L1 ternary complexes of marked cation π contacts. Full article